Hi, several years ago, I bought an Epson V100 for it was suitable for Linux. At the time I was running Ubuntu. Now I tried to use it under Arch Linux and I have some struggles...
I installed those packages from the aur reposit: iscan-data here is some output: >> sane-find-scanner found USB scanner (vendor=0x04b8 [EPSON], product=0x012d [EPSON Scanner]) at libusb:002:003 # Your USB scanner was (probably) detected. It may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage. >> scanimage -L hdevice `epkowa:usb:002:003' is a Epson (unknown model) flatbed scanner device `epson:libusb:002:003' is a Epson flatbed scanner >> in /etc/sane.d/epkowa.conf and in /etc/sane.d/epson.conf I have: usb usb 0x04b8 0x012d usb /dev/usb/scanner0 >> iscan Could not send command to scanner. Check scanner's status. >> xsane It proposes me to choose between 2 devices: epkowa:usb:002:003 Doesn't seem to end into anything. epson:libusb:002:003 Opens up xsane, but when trying to preview or scan: "Failed to start scanner: Invalid argumenth" Doing all those things with sudo leads to the same results. I do not know where to look anymore... Does someone have a hint? Thanks! St?phanie -- ---- St?phanie Vilayphiou <stdin> http://stdin.fr/ +32 (0)4 89 00 88 59 -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20111010/170005b0/attachment.html>