The SANE_USB_WORKAROUND env var was added in sane-backends 1.0.27, so I recommend an upgrade.
allan On Mon, Oct 23, 2017 at 9:18 AM, Jiri Kanicky <j...@ganomi.com> wrote: > Hi Allan, > > > > Thank you for your response. I really appreciate it. > > > > Currently I have latest sane-backends from Debian SID. Do I have to install > the developer version or the SANE_USB_WORKAROUND variable also works in > current debian version? As a workaround I might prefer to use the USB 2.0 > Type B plug until everything is fixed in the future or until I get new > scanner. This is much easier workaround then maintaining the developer > version. :). I can also try the experimental repo with sane-backends > (1.0.27-1~experimental2) if needed. > > > > Here are some details for you. > > > > # dpkg -l | grep libsane > > ii libsane:amd64 1.0.25-4.1 > > ii libsane-common 1.0.25-4.1 > > ii libsane-extras:amd64 1.0.22.5 > > ii libsane-extras-common 1.0.22.5 > > Using cable with USB 3.0 Type B plug: > > ------------------------------------------------------- > > > > jiri@superman:~$ SANE_USB_WORKAROUND=1 scanimage -L > device `fujitsu:ScanSnap iX500:64324' is a FUJITSU ScanSnap iX500 scanner > > > jiri@superman:~$ SANE_USB_WORKAROUND=1 scanimage -L > > No scanners were identified. If you were expecting something different, > check that the scanner is plugged in, turned on and detected by the > sane-find-scanner tool (if appropriate). Please read the documentation > which came with this software (README, FAQ, manpages). > > > > jiri@superman:~$ sane-find-scanner > > # sane-find-scanner will now attempt to detect your scanner. If the > # result is different from what you expected, first make sure your > # scanner is powered up and properly connected to your computer. > > # No SCSI scanners found. If you expected something different, make sure > that > # you have loaded a kernel SCSI driver for your SCSI adapter. > > found USB scanner (vendor=0x04c5 [Fujitsu], product=0x132b [ScanSnap iX500]) > at libusb:002:021 > could not open USB device 0x1d6b/0x0003 at 002:001: Access denied > (insufficient permissions) > could not open USB device 0x1bcf/0x2c6b at 001:004: Access denied > (insufficient permissions) > could not open USB device 0x1044/0x7a06 at 001:003: Access denied > (insufficient permissions) > could not open USB device 0x8087/0x0a2b at 001:002: Access denied > (insufficient permissions) > could not open USB device 0x1d6b/0x0002 at 001:001: Access denied > (insufficient permissions) > # Your USB scanner was (probably) detected. It may or may not be supported > by > # SANE. Try scanimage -L and read the backend's manpage. > > # Not checking for parallel port scanners. > > # Most Scanners connected to the parallel port or other proprietary ports > # can't be detected by this program. > > # You may want to run this program as root to find all devices. Once you > # found the scanner devices, be sure to adjust access permissions as > # necessary. > > Using cable with USB 2.0 Type B plug: > > ------------------------------------- > > > > jiri@superman:~$ scanimage -L > device `fujitsu:ScanSnap iX500:64324' is a FUJITSU ScanSnap iX500 scanner > > > jiri@superman:~$ scanimage -L > device `fujitsu:ScanSnap iX500:64324' is a FUJITSU ScanSnap iX500 scanner > > > jiri@superman:~$ sane-find-scanner > > # sane-find-scanner will now attempt to detect your scanner. If the > # result is different from what you expected, first make sure your > # scanner is powered up and properly connected to your computer. > > # No SCSI scanners found. If you expected something different, make sure > that > # you have loaded a kernel SCSI driver for your SCSI adapter. > > could not open USB device 0x1d6b/0x0003 at 002:001: Access denied > (insufficient permissions) > could not open USB device 0x1bcf/0x2c6b at 001:004: Access denied > (insufficient permissions) > could not open USB device 0x1044/0x7a06 at 001:003: Access denied > (insufficient permissions) > could not open USB device 0x8087/0x0a2b at 001:002: Access denied > (insufficient permissions) > found USB scanner (vendor=0x04c5 [Fujitsu], product=0x132b [ScanSnap iX500]) > at libusb:001:024 > could not open USB device 0x1d6b/0x0002 at 001:001: Access denied > (insufficient permissions) > # Your USB scanner was (probably) detected. It may or may not be supported > by > # SANE. Try scanimage -L and read the backend's manpage. > > # Not checking for parallel port scanners. > > # Most Scanners connected to the parallel port or other proprietary ports > # can't be detected by this program. > > # You may want to run this program as root to find all devices. Once you > # found the scanner devices, be sure to adjust access permissions as > # necessary. > > > > - Jiri > > > On Sunday, 22 October 2017 8:21:46 AM AEDT m. allan noah wrote: > >> What was the outcome from my suggestions last year? > >> > >> allan > >> > >> On Sat, Oct 21, 2017 at 12:09 PM, Jiri Kanicky <j...@ganomi.com> wrote: > >> > Hi, > >> > > >> > I know this is old topic, but I just would like to everyone know that: > >> > > >> > 1. When I use USB 3.0 Type B Plug connector (cable which comes with the > >> > scanner), scanimage -L recognizes the scanner only once and applications > >> > like Simple Scan or Skanlite are not able to scan. > >> > > >> > 2. However when I use USB 2.0 Type B Plug connector (i used cable from >> > my > >> > externar HDD), everything seems to work just fine. > >> > > >> > My notebook has got all USB ports USB 3.0 and I don't have USB 2 hub to > >> > test. > >> > > >> > Anyway using cable with old USB 2.0 B plug is simple workaround. > >> > > >> > If I can provide any debug data, which can help to fix the issue, please > >> > let me know and I can provide it for both cables. > >> > > >> > - Jiri > >> > > >> > On Monday, 21 November 2016 9:02:21 PM AEDT m. allan noah wrote: > >> >> You did not tell us what you upgraded? Sane-backends, your scanner, >> >> your > >> >> kernel? > >> >> > >> >> This sounds like a pretty typical linux usb bug. You might need to > >> >> install a development version of sane-backends from our git repo. Once > >> >> you have built and installed a sane-backends git snapshot (using the > >> >> info in README.linux), you can run scanimage -L repeatedly. You may > >> >> find that the scanner only shows up intermittently. If that is the > >> >> case, try running this repeatedly instead: > >> >> > >> >> SANE_USB_WORKAROUND=1 scanimage -L > >> >> > >> >> That might work better. If so, you will have to put > >> >> SANE_USB_WORKAROUND=1 into your environment. > >> >> > >> >> Oh, and BTW, your scanner is not supported by the snapscan backend. > >> >> Try fujitsu instead. > >> >> > >> >> allan > >> >> > >> >> On Mon, Nov 21, 2016 at 6:40 AM, Jiri <j...@ganomi.com> wrote: > >> >> > Hi, > >> >> > > >> >> > [Debian Sid] > >> >> > > >> >> > I started having problem with Fujitsu iX500 scanner after upgrade. It > >> >> > used > >> >> > to work fine, but now it seems the system identifies the scanner for >> >> > a > >> >> > just > >> >> > a while and but apps cannot use it. > >> >> > > >> >> > Here is example. I run the following command two times right after >> >> > each > >> >> > other. The scanner is recognized on first run (after plugging USB >> >> > in), > >> >> > but > >> >> > when I run it second time it says the scanner was not identified. > >> >> > > >> >> > Any help would be appreciated. > >> >> > > >> >> > > >> >> > ganomi@knightrider:~$ SANE_DEBUG_FUJITSU=15 scanimage -L > >> >> > [sanei_debug] Setting debug level of fujitsu to 15. > >> >> > [fujitsu] sane_init: start > >> >> > [fujitsu] sane_init: fujitsu backend 1.0.127, from sane-backends >> >> > 1.0.25 > >> >> > [fujitsu] sane_init: finish > >> >> > [fujitsu] sane_get_devices: start > >> >> > [fujitsu] sane_get_devices: reading config file fujitsu.conf > >> >> > [fujitsu] sane_get_devices: setting "buffer-size" to 65536 > >> >> > [fujitsu] sane_get_devices: looking for 'scsi FUJITSU' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1041' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1042' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1078' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1095' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1096' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1097' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10ad' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10ae' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10af' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10cf' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10e0' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10e1' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10e2' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10e6' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10e7' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10f2' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10fe' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1135' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x114a' > >> >> > [fujitsu] sane_get_devices: config option "buffer-size" (262144) is > > >> >> > 65536, warning! > >> >> > [fujitsu] sane_get_devices: setting "buffer-size" to 262144 > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x114d' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x114e' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x114f' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1150' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1155' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x116f' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1174' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1175' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1176' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1177' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1178' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x119d' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x119e' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11a2' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11f1' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11f2' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11f3' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11f4' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11fc' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1213' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x128e' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x132b' > >> >> > [fujitsu] attach_one: start > >> >> > [fujitsu] attach_one: looking for 'libusb:003:004' > >> >> > [fujitsu] connect_fd: start > >> >> > [fujitsu] connect_fd: opening USB device > >> >> > [fujitsu] wait_scanner: start > >> >> > [fujitsu] do_usb_cmd: start > >> >> > [fujitsu] do_usb_cmd: finish > >> >> > [fujitsu] wait_scanner: finish > >> >> > [fujitsu] connect_fd: finish > >> >> > [fujitsu] init_inquire: start > >> >> > [fujitsu] do_usb_cmd: start > >> >> > [fujitsu] do_usb_cmd: finish > >> >> > [fujitsu] init_inquire: Found FUJITSU scanner ScanSnap iX500 version > >> >> > 0L00 > >> >> > at libusb:003:004 > >> >> > [fujitsu] inquiry options > >> >> > [fujitsu] color offset: 0 lines > >> >> > [fujitsu] long gray scan: 1 > >> >> > [fujitsu] long color scan: 1 > >> >> > [fujitsu] emulation mode: 0 > >> >> > [fujitsu] CMP/CGA: 0 > >> >> > [fujitsu] background back: 0 > >> >> > [fujitsu] background front: 0 > >> >> > [fujitsu] background fb: 0 > >> >> > [fujitsu] back only scan: 1 > >> >> > [fujitsu] duplex offset: 0 lines > >> >> > [fujitsu] init_inquire: finish > >> >> > [fujitsu] init_vpd: start > >> >> > [fujitsu] do_usb_cmd: start > >> >> > [fujitsu] do_usb_cmd: finish > >> >> > [fujitsu] init_vpd: length=8b > >> >> > [fujitsu] standard options > >> >> > [fujitsu] basic x res: 600 dpi > >> >> > [fujitsu] basic y res: 600 dpi > >> >> > [fujitsu] step x res: 1 dpi > >> >> > [fujitsu] step y res: 1 dpi > >> >> > [fujitsu] max x res: 600 dpi > >> >> > [fujitsu] max y res: 600 dpi > >> >> > [fujitsu] min x res: 50 dpi > >> >> > [fujitsu] min y res: 50 dpi > >> >> > [fujitsu] 60 dpi: 1 > >> >> > [fujitsu] 75 dpi: 1 > >> >> > [fujitsu] 100 dpi: 1 > >> >> > [fujitsu] 120 dpi: 1 > >> >> > [fujitsu] 150 dpi: 1 > >> >> > [fujitsu] 160 dpi: 1 > >> >> > [fujitsu] 180 dpi: 1 > >> >> > [fujitsu] 200 dpi: 1 > >> >> > [fujitsu] 240 dpi: 1 > >> >> > [fujitsu] 300 dpi: 1 > >> >> > [fujitsu] 320 dpi: 1 > >> >> > [fujitsu] 400 dpi: 1 > >> >> > [fujitsu] 480 dpi: 1 > >> >> > [fujitsu] 600 dpi: 1 > >> >> > [fujitsu] 800 dpi: 0 > >> >> > [fujitsu] 1200 dpi: 0 > >> >> > [fujitsu] max width: 8.71 inches > >> >> > [fujitsu] max length: 34.52 inches > >> >> > [fujitsu] overflow: 1 > >> >> > [fujitsu] monochrome: 1 > >> >> > [fujitsu] halftone: 1 > >> >> > [fujitsu] grayscale: 1 > >> >> > [fujitsu] color_monochrome: 0 > >> >> > [fujitsu] color_halftone: 0 > >> >> > [fujitsu] color_grayscale: 1 > >> >> > [fujitsu] vendor options > >> >> > [fujitsu] adf: 1 > >> >> > [fujitsu] flatbed: 0 > >> >> > [fujitsu] transparency: 0 > >> >> > [fujitsu] duplex: 1 > >> >> > [fujitsu] back endorser: 0 > >> >> > [fujitsu] barcode: 0 > >> >> > [fujitsu] operator panel: 1 > >> >> > [fujitsu] front endorser: 0 > >> >> > [fujitsu] multi-purpose stacker: 0 > >> >> > [fujitsu] prepick: 0 > >> >> > [fujitsu] mf detect: 0 > >> >> > [fujitsu] paper protection: 0 > >> >> > [fujitsu] A/D bits: 10 > >> >> > [fujitsu] buffer bytes: 402653184 > >> >> > [fujitsu] Standard commands > >> >> > [fujitsu] mode_sense_10 cmd: 0 > >> >> > [fujitsu] mode_select_10 cmd: 0 > >> >> > [fujitsu] log_sense cmd: 0 > >> >> > [fujitsu] log_select cmd: 0 > >> >> > [fujitsu] change cmd: 0 > >> >> > [fujitsu] read_buffer cmd: 0 > >> >> > [fujitsu] write_buffer cmd: 0 > >> >> > [fujitsu] copy_and_verify cmd: 0 > >> >> > [fujitsu] compare cmd: 0 > >> >> > [fujitsu] get_d_b_status cmd: 0 > >> >> > [fujitsu] object_pos cmd: 1 > >> >> > [fujitsu] send cmd: 1 > >> >> > [fujitsu] read cmd: 1 > >> >> > [fujitsu] get_window cmd: 0 > >> >> > [fujitsu] set_window cmd: 1 > >> >> > [fujitsu] send_diag cmd: 1 > >> >> > [fujitsu] read_diag cmd: 1 > >> >> > [fujitsu] scan cmd: 1 > >> >> > [fujitsu] mode_sense_6 cmd: 1 > >> >> > [fujitsu] copy cmd: 0 > >> >> > [fujitsu] release cmd: 1 > >> >> > [fujitsu] reserve_unit cmd: 1 > >> >> > [fujitsu] mode_select_6 cmd: 1 > >> >> > [fujitsu] inquiry cmd: 1 > >> >> > [fujitsu] request_sense cmd: 1 > >> >> > [fujitsu] test_unit_ready cmd: 1 > >> >> > [fujitsu] Vendor commands > >> >> > [fujitsu] subwindow cmd: 0 > >> >> > [fujitsu] endorser cmd: 0 > >> >> > [fujitsu] hardware status cmd: 1 > >> >> > [fujitsu] hardware status 2 cmd: 0 > >> >> > [fujitsu] hardware status 3 cmd: 0 > >> >> > [fujitsu] scanner control cmd: 1 > >> >> > [fujitsu] device restart cmd: 1 > >> >> > [fujitsu] brightness steps: 0 > >> >> > [fujitsu] threshold steps: 255 > >> >> > [fujitsu] contrast steps: 0 > >> >> > [fujitsu] built in gamma patterns: 0 > >> >> > [fujitsu] download gamma patterns: 1 > >> >> > [fujitsu] built in dither patterns: 4 > >> >> > [fujitsu] download dither patterns: 1 > >> >> > [fujitsu] RIF: 1 > >> >> > [fujitsu] DTC (AutoI): 0 > >> >> > [fujitsu] SDTC (AutoII): 1 > >> >> > [fujitsu] outline extraction: 0 > >> >> > [fujitsu] image emphasis: 1 > >> >> > [fujitsu] automatic separation: 0 > >> >> > [fujitsu] mirror image: 0 > >> >> > [fujitsu] white level follower: 0 > >> >> > [fujitsu] subwindow: 0 > >> >> > [fujitsu] diffusion: 1 > >> >> > [fujitsu] ipc3: 0 > >> >> > [fujitsu] rotation: 0 > >> >> > [fujitsu] hybrid crop deskew: 0 > >> >> > [fujitsu] ipc2 byte 67: 0 > >> >> > [fujitsu] compression MH: 0 > >> >> > [fujitsu] compression MR: 0 > >> >> > [fujitsu] compression MMR: 0 > >> >> > [fujitsu] compression JBIG: 0 > >> >> > [fujitsu] compression JPG1: 1 > >> >> > [fujitsu] (Disabled) > >> >> > [fujitsu] compression JPG2: 0 > >> >> > [fujitsu] compression JPG3: 0 > >> >> > [fujitsu] back endorser mech: 0 > >> >> > [fujitsu] back endorser stamp: 0 > >> >> > [fujitsu] back endorser elec: 0 > >> >> > [fujitsu] endorser max id: 0 > >> >> > [fujitsu] front endorser mech: 0 > >> >> > [fujitsu] front endorser stamp: 0 > >> >> > [fujitsu] front endorser elec: 0 > >> >> > [fujitsu] back endorser type: 0 > >> >> > [fujitsu] back endorser type: 0 > >> >> > [fujitsu] connection type: 3 > >> >> > [fujitsu] endorser ext: 0 > >> >> > [fujitsu] endorser pr_b: 0 > >> >> > [fujitsu] endorser pr_f: 0 > >> >> > [fujitsu] endorser po_b: 0 > >> >> > [fujitsu] endorser po_f: 0 > >> >> > [fujitsu] horizontal overscan: 153 > >> >> > [fujitsu] vertical overscan: 153 > >> >> > [fujitsu] default bg adf b: 0 > >> >> > [fujitsu] default bg adf f: 0 > >> >> > [fujitsu] default bg fb: 0 > >> >> > [fujitsu] auto color: 1 > >> >> > [fujitsu] blank skip: 1 > >> >> > [fujitsu] multi image: 0 > >> >> > [fujitsu] f b type indep: 0 > >> >> > [fujitsu] f b res indep: 0 > >> >> > [fujitsu] dropout spec: 0 > >> >> > [fujitsu] dropout non: 0 > >> >> > [fujitsu] dropout white: 0 > >> >> > [fujitsu] skew check: 0 > >> >> > [fujitsu] new feed roller: 0 > >> >> > [fujitsu] paper count: 0 > >> >> > [fujitsu] paper number: 0 > >> >> > [fujitsu] ext send to: 0 > >> >> > [fujitsu] staple det: 0 > >> >> > [fujitsu] pause host: 0 > >> >> > [fujitsu] pause panel: 0 > >> >> > [fujitsu] pause conf: 0 > >> >> > [fujitsu] hq print: 0 > >> >> > [fujitsu] ext GHS len: 0 > >> >> > [fujitsu] smbc func: 0 > >> >> > [fujitsu] imprint chk b: 0 > >> >> > [fujitsu] imprint chk f: 0 > >> >> > [fujitsu] force w bg: 0 > >> >> > [fujitsu] mf recover lvl: 0 > >> >> > [fujitsu] first read time: 1 > >> >> > [fujitsu] div scanning: 0 > >> >> > [fujitsu] start job: 1 > >> >> > [fujitsu] lifetime log: 1 > >> >> > [fujitsu] imff save rest: 0 > >> >> > [fujitsu] wide scsi type: 0 > >> >> > [fujitsu] lut hybrid crop: 0 > >> >> > [fujitsu] over under amt: 0 > >> >> > [fujitsu] rgb lut: 0 > >> >> > [fujitsu] num lut dl: 0 > >> >> > [fujitsu] ErP Lot6 (power off timer): 1 > >> >> > [fujitsu] sync next feed: 1 > >> >> > [fujitsu] object postion halt: 0 > >> >> > [fujitsu] init_vpd: finish > >> >> > [fujitsu] init_ms: start > >> >> > [fujitsu] autocolor: 0 > >> >> > [fujitsu] prepick: 0 > >> >> > [fujitsu] sleep: 0 > >> >> > [fujitsu] duplex: 0 > >> >> > [fujitsu] rand: 0 > >> >> > [fujitsu] bg: 0 > >> >> > [fujitsu] df: 0 > >> >> > [fujitsu] dropout: 0 > >> >> > [fujitsu] buff: 0 > >> >> > [fujitsu] auto: 0 > >> >> > [fujitsu] lamp: 0 > >> >> > [fujitsu] jobsep: 0 > >> >> > [fujitsu] init_ms: finish > >> >> > [fujitsu] init_model: start > >> >> > [fujitsu] init_model: finish > >> >> > [fujitsu] init_user: start > >> >> > [fujitsu] init_user: finish > >> >> > [fujitsu] init_options: start > >> >> > [fujitsu] init_options: finish > >> >> > [fujitsu] init_interlace: start > >> >> > [fujitsu] update_params: start > >> >> > [fujitsu] update_params: x: max=10448, page=10200, gpw=10200, res=600 > >> >> > [fujitsu] update_params: y: max=41424, page=13200, gph=13200, res=600 > >> >> > [fujitsu] update_params: area: tlx=0, brx=10200, tly=0, bry=13200 > >> >> > [fujitsu] update_params: params: ppl=5100, Bpl=15300, lines=6600 > >> >> > [fujitsu] update_params: params: format=1, depth=8, last=1 > >> >> > [fujitsu] update_u_params: start > >> >> > [fujitsu] update_u_params: finish > >> >> > [fujitsu] update_params: finish > >> >> > [fujitsu] init_interlace: color_interlace: 1 > >> >> > [fujitsu] init_interlace: finish > >> >> > [fujitsu] init_serial: start > >> >> > [fujitsu] do_usb_cmd: start > >> >> > [fujitsu] do_usb_cmd: finish > >> >> > [fujitsu] do_usb_cmd: start > >> >> > [fujitsu] do_usb_cmd: finish > >> >> > [fujitsu] init_serial: found sn 64324 > >> >> > [fujitsu] init_serial: serial_name: ScanSnap iX500:64324 > >> >> > [fujitsu] init_serial: finish > >> >> > [fujitsu] disconnect_fd: start > >> >> > [fujitsu] disconnecting usb device > >> >> > [fujitsu] disconnect_fd: finish > >> >> > [fujitsu] attach_one: finish > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x132c' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x132d' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x132e' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x132f' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x13f4' > >> >> > [fujitsu] sane_get_devices: found scanner libusb:003:004 > >> >> > [fujitsu] sane_get_devices: found 1 scanner(s) > >> >> > [fujitsu] sane_get_devices: finish > >> >> > device `fujitsu:ScanSnap iX500:64324' is a FUJITSU ScanSnap iX500 > >> >> > scanner > >> >> > [fujitsu] sane_exit: start > >> >> > [fujitsu] disconnect_fd: start > >> >> > [fujitsu] disconnect_fd: finish > >> >> > [fujitsu] sane_exit: finish > >> >> > ganomi@knightrider:~$ SANE_DEBUG_FUJITSU=15 scanimage -L > >> >> > [sanei_debug] Setting debug level of fujitsu to 15. > >> >> > [fujitsu] sane_init: start > >> >> > [fujitsu] sane_init: fujitsu backend 1.0.127, from sane-backends >> >> > 1.0.25 > >> >> > [fujitsu] sane_init: finish > >> >> > [fujitsu] sane_get_devices: start > >> >> > [fujitsu] sane_get_devices: reading config file fujitsu.conf > >> >> > [fujitsu] sane_get_devices: setting "buffer-size" to 65536 > >> >> > [fujitsu] sane_get_devices: looking for 'scsi FUJITSU' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1041' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1042' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1078' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1095' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1096' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1097' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10ad' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10ae' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10af' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10cf' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10e0' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10e1' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10e2' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10e6' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10e7' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10f2' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10fe' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1135' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x114a' > >> >> > [fujitsu] sane_get_devices: config option "buffer-size" (262144) is > > >> >> > 65536, warning! > >> >> > [fujitsu] sane_get_devices: setting "buffer-size" to 262144 > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x114d' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x114e' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x114f' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1150' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1155' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x116f' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1174' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1175' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1176' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1177' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1178' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x119d' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x119e' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11a2' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11f1' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11f2' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11f3' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11f4' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11fc' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1213' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x128e' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x132b' > >> >> > [fujitsu] attach_one: start > >> >> > [fujitsu] attach_one: looking for 'libusb:003:004' > >> >> > [fujitsu] connect_fd: start > >> >> > [fujitsu] connect_fd: opening USB device > >> >> > [fujitsu] wait_scanner: start > >> >> > [fujitsu] do_usb_cmd: start > >> >> > [fujitsu] stat: return error 'Error during device I/O' > >> >> > [fujitsu] WARNING: Brain-dead scanner. Hitting with stick > >> >> > [fujitsu] do_usb_cmd: start > >> >> > [fujitsu] stat: return error 'Error during device I/O' > >> >> > [fujitsu] WARNING: Brain-dead scanner. Hitting with stick again > >> >> > [fujitsu] do_usb_cmd: start > >> >> > [fujitsu] stat: return error 'Error during device I/O' > >> >> > [fujitsu] wait_scanner: error 'Error during device I/O' > >> >> > [fujitsu] wait_scanner: finish > >> >> > [fujitsu] connect_fd: could not wait_scanner > >> >> > [fujitsu] disconnect_fd: start > >> >> > [fujitsu] disconnecting usb device > >> >> > [fujitsu] disconnect_fd: finish > >> >> > [fujitsu] connect_fd: finish > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x132c' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x132d' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x132e' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x132f' > >> >> > [fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x13f4' > >> >> > [fujitsu] sane_get_devices: found 0 scanner(s) > >> >> > [fujitsu] sane_get_devices: finish > >> >> > > >> >> > No scanners were identified. If you were expecting something >> >> > different, > >> >> > check that the scanner is plugged in, turned on and detected by the > >> >> > sane-find-scanner tool (if appropriate). Please read the >> >> > documentation > >> >> > which came with this software (README, FAQ, manpages). > >> >> > [fujitsu] sane_exit: start > >> >> > [fujitsu] sane_exit: finish > >> >> > ganomi@knightrider:~$ sane-find-scanner > >> >> > > >> >> > # sane-find-scanner will now attempt to detect your scanner. If the > >> >> > # result is different from what you expected, first make sure your > >> >> > # scanner is powered up and properly connected to your computer. > >> >> > > >> >> > # No SCSI scanners found. If you expected something different, make > >> >> > sure > >> >> > > >> >> > that > >> >> > > >> >> > # you have loaded a kernel SCSI driver for your SCSI adapter. > >> >> > > >> >> > could not open USB device 0x8087/0x8001 at 001:002: Access denied > >> >> > (insufficient permissions) > >> >> > could not open USB device 0x1d6b/0x0002 at 001:001: Access denied > >> >> > (insufficient permissions) > >> >> > found USB scanner (vendor=0x04c5 [Fujitsu], product=0x132b [ScanSnap > >> >> > iX500]) at libusb:003:004 > >> >> > could not open USB device 0x1d6b/0x0003 at 003:001: Access denied > >> >> > (insufficient permissions) > >> >> > could not open USB device 0x04f2/0xb45d at 002:005: Access denied > >> >> > (insufficient permissions) > >> >> > could not open USB device 0x8087/0x0a2a at 002:004: Access denied > >> >> > (insufficient permissions) > >> >> > could not open USB device 0x138a/0x0017 at 002:003: Access denied > >> >> > (insufficient permissions) > >> >> > could not open USB device 0x04f3/0x012d at 002:002: Access denied > >> >> > (insufficient permissions) > >> >> > could not open USB device 0x1d6b/0x0002 at 002:001: Access denied > >> >> > (insufficient permissions) > >> >> > > >> >> > # Your USB scanner was (probably) detected. It may or may not be > >> >> > supported > >> >> > > >> >> > by > >> >> > > >> >> > # SANE. Try scanimage -L and read the backend's manpage. > >> >> > > >> >> > # Not checking for parallel port scanners. > >> >> > > >> >> > # Most Scanners connected to the parallel port or other proprietary > >> >> > ports > >> >> > # can't be detected by this program. > >> >> > > >> >> > # You may want to run this program as root to find all devices. Once > >> >> > you > >> >> > # found the scanner devices, be sure to adjust access permissions as > >> >> > # necessary > >> >> > > >> >> > Again after I plug the USB in my computer... > >> >> > > >> >> > ganomi@knightrider:~$ SANE_DEBUG_SNAPSCAN=128 scanimage -L > >> >> > [sanei_debug] Setting debug level of snapscan to 128. > >> >> > [snapscan] sane_snapscan_init > >> >> > [snapscan] sane_snapscan_init: Snapscan backend version 1.4.53 > >> >> > [snapscan] sane_snapscan_get_devices (0x7ffd9e003240, 0) > >> >> > device `fujitsu:ScanSnap iX500:64324' is a FUJITSU ScanSnap iX500 > >> >> > scanner > >> >> > [snapscan] sane_snapscan_exit > >> >> > > >> >> > ganomi@knightrider:~$ SANE_DEBUG_SNAPSCAN=128 scanimage -L > >> >> > [sanei_debug] Setting debug level of snapscan to 128. > >> >> > [snapscan] sane_snapscan_init > >> >> > [snapscan] sane_snapscan_init: Snapscan backend version 1.4.53 > >> >> > [snapscan] sane_snapscan_get_devices (0x7ffd2ac76300, 0) > >> >> > > >> >> > No scanners were identified. If you were expecting something >> >> > different, > >> >> > check that the scanner is plugged in, turned on and detected by the > >> >> > sane-find-scanner tool (if appropriate). Please read the >> >> > documentation > >> >> > which came with this software (README, FAQ, manpages). > >> >> > [snapscan] sane_snapscan_exit > >> >> > > >> >> > > >> >> > Thanks Jiri > >> >> > > >> >> > -- > >> >> > sane-devel mailing list: sane-devel@lists.alioth.debian.org > >> >> > http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel > >> >> > Unsubscribe: Send mail with subject "unsubscribe your_password" > >> >> > > >> >> > to sane-devel-requ...@lists.alioth.debian.org > > > > -- "well, I stand up next to a mountain- and I chop it down with the edge of my hand" -- sane-devel mailing list: sane-devel@lists.alioth.debian.org http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel Unsubscribe: Send mail with subject "unsubscribe your_password" to sane-devel-requ...@lists.alioth.debian.org