Hi, backend author here - it shouldn't be too much of effort to expose button status so scanbd can use it. Though haven't gone thru its documentation to understand requirements. As a technical insight - there is hp5590_read_buttons() function in hp5590_cmds.c that reads button status. However, I'll seek for a volunteer to test a change as I don't have access to HW currently.
On Wed, Mar 7, 2018 at 12:40 AM, Wilhelm Meier <wilhelm.wm.me...@googlemail.com> wrote: > Please try the old scanbuttond-backend for this type of scanner - it > should work. The HP sane backend sadly doesn't support the buttons on > this scanner. > > Am 06.03.2018 um 15:46 schrieb Jared Hedegaard: >>> >>> Main question: does the HP 5590 support button presses or am I just setting >>> this up incorrectly? >>> >>> I'm been successful using scanbd with SANE backends to get scanning working >>> over my network and locally on the host machine, but I can't seem to get it >>> to recognize button presses, either running scanbd in foreground or >>> background. >>> >>> For past testing, it seems that actions defined in scanbd.conf are used to >>> tie to the backend options? From searching /var/log/syslog, I expected to >>> track button presses or get some sort of trigger feedback, and I didn't >>> think I needed an action set up for it. >>> >>> Any help on this one would be much appreciated. Thanks. >>> >>> Jared H >>> >> >> After a bit more research, it looks like doing this with the SANE backend >> for HP 5590 is not possible. scanbd is used to tie custom actions to the >> options available on the scanner. In this case, none of the 10 options seem >> to return values. They all look to be ones that I designate from some client >> software. >> >> scanbd: found active option[1] tl-x (type: 2) for device >> hp5590:libusb:001:008 >> scanbd: found active option[2] tl-y (type: 2) for device >> hp5590:libusb:001:008 >> scanbd: found active option[3] br-x (type: 2) for device >> hp5590:libusb:001:008 >> scanbd: found active option[4] br-y (type: 2) for device >> hp5590:libusb:001:008 >> scanbd: found active option[5] mode (type: 3) for device >> hp5590:libusb:001:008 >> scanbd: found active option[6] source (type: 3) for device >> hp5590:libusb:001:008 >> scanbd: found active option[7] resolution (type: 1) for device >> hp5590:libusb:001:008 scanbd: found active option[8] extend-lamp-timeout >> (type: 0) for device hp5590:libusb:001:008 >> scanbd: found active option[9] wait-for-button (type: 0) for device >> hp5590:libusb:001:008 >> scanbd: found active option[10] preview (type: 0) for device >> hp5590:libusb:001:008 >> >> In this case, it looks like I will have to try the old scanbuttond backends >> for this, or see if there are optional enhancements for the SANE hp5590 >> backend. >> >> Jared >> > > > -- > sane-devel mailing list: sane-devel@lists.alioth.debian.org > http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel > Unsubscribe: Send mail with subject "unsubscribe your_password" > to sane-devel-requ...@lists.alioth.debian.org -- Ilia Sotnikov -- sane-devel mailing list: sane-devel@lists.alioth.debian.org http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel Unsubscribe: Send mail with subject "unsubscribe your_password" to sane-devel-requ...@lists.alioth.debian.org