Re: [Nut-upsuser] driver for HP/Compaq T750 ?
Hey KP, please keep the traffic on the list. other can be interested in... 2009/3/2 KP Kirchdoerfer kap...@bering-uclibc.de Am Sonntag, 1. März 2009 20:57:21 schrieben Sie: - Afficher le texte des messages précédents - 2009/3/1 KP Kirchdoerfer kap...@bering-uclibc.de Hello; Am Sonntag, 1. März 2009 19:42:08 schrieb Arnaud Quette: 2009/2/27 KP Kirchdoerfer kap...@bering-uclibc.de Am Freitag, 27. Februar 2009 18:35:11 schrieb Arnaud Quette: 2009/2/27 KP Kirchdoerfer kap...@bering-uclibc.de Am Donnerstag, 26. Februar 2009 20:37:56 schrieben Sie: Citeren KP Kirchdoerfer kap...@bering-uclibc.de: [...] And the upshid-ups driver ends with: No matching HID UPS found Driver failed to start (exit status=1) Try this driver again, but make sure to add productid = 1f06 to the ups.conf entry for this device. Chances are that it is a re-branded Tripplite unit (we've seen other HP units that are actually this brand). Unfortunately the same result... (Driver failed to start...) any more hints? lsusb -vv -d 03f0:1f06 see below also test bcmxcp or bcmxcp_usb Also these does not work... kp ok, we've confirmed the exact type of device and so the driver is really *usbhid-ups* now, your vendor/productIDs are not yet supported, so you need to do: usbhid-ups -DD -u root -x explore -x vendorid=3f0 -a compaq-ups this should give us more info ;-) Assuming you meant vendorid 03f0 I really get a lot of information... see below. (sorry if that much of information is annyoing in the users list, hopefully it will be the last time). we'll then see if we can easily add it... would be cool (...) congrats, it is! either checkout the latest trunk or apply the attached patch. thanks to confirm that the reported data looks coherent (particularly the battery.voltage) and that the standard tests runs (ie OB and OB LB + potential commands like tests...) an upsc + upsrw + upscmd output is welcome. also note that you will need an entry in the udev file. btw, it's a tripplite rebranded unit. cheers, Arnaud I guess the patch was slghtly wrong it should /* HP T750 INTL */ { USB_DEVICE(HP_VENDORID, 0x1f06), battery_scale_1dot0 }, syslog now shows: Mar 2 17:27:56 nl-sv-xen usbhid-ups[20794]: Startup successful Hopefully I can now start to configure and test nut yup, the patch was bad (copy paste) thanks to send the requested outputs and do the requested tests. cheers, Arnaud -- Linux / Unix Expert RD - Eaton - http://www.eaton.com/mgeops Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/ Debian Developer - http://people.debian.org/~aquette/ Free Software Developer - http://arnaud.quette.free.fr/ ___ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
Re: [Nut-upsuser] driver for HP/Compaq T750 ?
Gents, Am Dienstag, 3. März 2009 11:13:00 schrieb Arnaud Quette: Hey KP, [...] we'll then see if we can easily add it... would be cool (...) congrats, it is! either checkout the latest trunk or apply the attached patch. thanks to confirm that the reported data looks coherent (particularly the battery.voltage) and that the standard tests runs (ie OB and OB LB + potential commands like tests...) an upsc + upsrw + upscmd output is welcome. also note that you will need an entry in the udev file. btw, it's a tripplite rebranded unit. I finally managed to install it with the patch above (typo fixed) and enhanced udev rules as Arnaud adviced. The data looks reasonable, though I'm no engineer or physician and have to believe more or lee what I see. But I've successfully tested that power is reported and that at ca. 25% of battery charge a shutdown is initiated. So my goals are achieved. I'll attach the patches and output of the requested commands. Thx very much again for the fast and valuable help. kp --- scripts/udev/52-nut-usbups.rules.orig 2009-03-03 23:57:54.0 +0100 +++ scripts/udev/52-nut-usbups.rules 2009-03-03 23:58:34.0 +0100 @@ -13,6 +13,9 @@ # HP R/T 2200 INTL (like SMART2200RMXL2U) - usbhid-ups SYSFS{idVendor}==03f0, SYSFS{idProduct}==1f0a, MODE=664, GROUP=nut +# HP T750 INTL - usbhid-ups +SYSFS{idVendor}==03f0, SYSFS{idProduct}==1f06, MODE=664, GROUP=nut + # MGE Office Protection Systems, prev. MGE UPS Systems # various models - usbhid-ups SYSFS{idVendor}==0463, SYSFS{idProduct}==0001, MODE=664, GROUP=nut --- drivers/tripplite-hid.c.orig 2009-03-03 23:42:29.0 +0100 +++ drivers/tripplite-hid.c 2009-03-02 17:24:49.0 +0100 @@ -85,6 +85,9 @@ /* HP R/T 2200 INTL (like SMART2200RMXL2U) */ { USB_DEVICE(HP_VENDORID, 0x1f0a), battery_scale_1dot0 }, + /* HP T750 INTL */ + { USB_DEVICE(HP_VENDORID, 0x1f06), battery_scale_1dot0 }, + /* Terminating entry */ { -1, -1, NULL } }; Instant commands supported on UPS [ups]: beeper.disable - Disable the UPS beeper beeper.enable - Enable the UPS beeper beeper.mute - Temporarily mute the UPS beeper beeper.off - Obsolete (use beeper.disable or beeper.mute) beeper.on - Obsolete (use beeper.enable) load.off - Turn off the load immediately load.off.delay - Turn off the load with a delay (seconds) load.on - Turn on the load immediately load.on.delay - Turn on the load with a delay (seconds) shutdown.reboot - Shut down the load briefly while rebooting the UPS shutdown.return - Turn off the load and return when power is back shutdown.stayoff - Turn off the load and remain off shutdown.stop - Stop a shutdown in progress test.battery.start.deep - Start a deep battery test test.battery.start.quick - Start a quick battery test test.battery.stop - Stop the battery test battery.charge: 91 battery.charge.low: 10 battery.charge.warning: 30 battery.temperature: 37.9 battery.type: PbAc battery.voltage: 25.1 battery.voltage.nominal: 24.0 driver.name: usbhid-ups driver.parameter.pollfreq: 30 driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.version: 2.4.1 driver.version.data: TrippLite HID 0.4 driver.version.internal: 0.34 input.frequency: 49.9 input.transfer.high: 277.0 input.transfer.low: 158.0 input.voltage: 224.4 input.voltage.nominal: 230 output.frequency: 49.9 output.frequency.nominal: 50 output.voltage: 223.3 output.voltage.nominal: 230 ups.beeper.status: enabled ups.delay.shutdown: 20 ups.delay.start: 30 ups.load: 59 ups.mfr: Hewlett-Packard ups.model: T750 INTL ups.power.nominal: 750 ups.productid: 1f06 ups.serial: 2CJ5380638 ups.status: OL CHRG ups.timer.reboot: -1 ups.timer.shutdown: -1 ups.timer.start: -1 ups.vendorid: 03f0 [battery.charge.low] Remaining battery level when UPS switches to LB (percent) Type: STRING Value: 10 [input.transfer.high] High voltage transfer point (V) Type: STRING Value: 277.0 [input.transfer.low] Low voltage transfer point (V) Type: STRING Value: 158.0 [ups.delay.shutdown] Interval to wait after shutdown with delay command (seconds) Type: STRING Value: 20 [ups.delay.start] Interval to wait before (re)starting the load (seconds) Type: STRING Value: 30 ___ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
Re: [Nut-upsuser] driver for HP/Compaq T750 ?
Hello; Am Sonntag, 1. März 2009 19:42:08 schrieb Arnaud Quette: 2009/2/27 KP Kirchdoerfer kap...@bering-uclibc.de Am Freitag, 27. Februar 2009 18:35:11 schrieb Arnaud Quette: 2009/2/27 KP Kirchdoerfer kap...@bering-uclibc.de Am Donnerstag, 26. Februar 2009 20:37:56 schrieben Sie: Citeren KP Kirchdoerfer kap...@bering-uclibc.de: [...] And the upshid-ups driver ends with: No matching HID UPS found Driver failed to start (exit status=1) Try this driver again, but make sure to add productid = 1f06 to the ups.conf entry for this device. Chances are that it is a re-branded Tripplite unit (we've seen other HP units that are actually this brand). Unfortunately the same result... (Driver failed to start...) any more hints? lsusb -vv -d 03f0:1f06 see below also test bcmxcp or bcmxcp_usb Also these does not work... kp ok, we've confirmed the exact type of device and so the driver is really *usbhid-ups* now, your vendor/productIDs are not yet supported, so you need to do: usbhid-ups -DD -u root -x explore -x vendorid=3f0 -a compaq-ups this should give us more info ;-) Assuming you meant vendorid 03f0 I really get a lot of information... see below. (sorry if that much of information is annyoing in the users list, hopefully it will be the last time). we'll then see if we can easily add it... would be cool kp * usbhid-ups -DD -u root -x explore -x vendorid=03f0 -a compaq-ups * - VendorID: 03f0 - ProductID: 1f06 - Manufacturer: Hewlett-Packard - Product: T750 INTL - Serial Number: 2CJ5380638 - Bus: 001 Trying to match device Device matches failed to claim USB device, trying 2 more time(s)... detaching kernel driver from USB device... trying again to claim USB device... HID descriptor length 900 Report Descriptor size = 900 Using subdriver: EXPLORE HID 0.1 Path: UPS.PowerSummary.iProduct, Type: Feature, ReportID: 0x28, Offset: 0, Size: 8, Value: 36.00 Path: UPS.PowerSummary.iSerialNumber, Type: Feature, ReportID: 0x29, Offset: 0, Size: 8, Value: 50.00 Path: UPS.PowerSummary.iManufacturer, Type: Feature, ReportID: 0x2b, Offset: 0, Size: 8, Value: 4.00 Path: UPS.PowerSummary.Input.ConfigVoltage, Type: Feature, ReportID: 0x30, Offset: 0, Size: 8, Value: 230.00 Path: UPS.PowerSummary.Input.Voltage, Type: Feature, ReportID: 0x31, Offset: 0, Size: 16, Value: 226.10 Path: UPS.PowerSummary.AudibleAlarmControl, Type: Feature, ReportID: 0x11, Offset: 0, Size: 8, Value: 2.00 Path: UPS.PowerSummary.iDeviceChemistry, Type: Feature, ReportID: 0x2a, Offset: 0, Size: 8, Value: 40.00 Path: UPS.PowerSummary.iOEMInformation, Type: Feature, ReportID: 0x62, Offset: 0, Size: 8, Value: 4.00 Path: UPS.PowerSummary.CapacityMode, Type: Feature, ReportID: 0x33, Offset: 0, Size: 8, Value: 2.00 Path: UPS.PowerSummary.RemainingCapacity, Type: Input, ReportID: 0x34, Offset: 0, Size: 8, Value: 100.00 Path: UPS.PowerSummary.RemainingCapacity, Type: Feature, ReportID: 0x34, Offset: 0, Size: 8, Value: 100.00 Path: UPS.PowerSummary.RemainingCapacityLimit, Type: Feature, ReportID: 0x3a, Offset: 0, Size: 8, Value: 10.00 Path: UPS.PowerSummary.FullChargeCapacity, Type: Feature, ReportID: 0x37, Offset: 0, Size: 8, Value: 100.00 Path: UPS.PowerSummary.DesignCapacity, Type: Feature, ReportID: 0x36, Offset: 0, Size: 8, Value: 100.00 Path: UPS.PowerSummary.WarningCapacityLimit, Type: Feature, ReportID: 0x38, Offset: 0, Size: 8, Value: 30.00 Path: UPS.PowerSummary.CapacityGranularity1, Type: Feature, ReportID: 0x3b, Offset: 0, Size: 8, Value: 1.00 Path: UPS.PowerSummary.CapacityGranularity2, Type: Feature, ReportID: 0x39, Offset: 0, Size: 8, Value: 1.00 Path: UPS.PowerSummary.Rechargeable, Type: Feature, ReportID: 0x2c, Offset: 0, Size: 8, Value: 1.00 Path: UPS.PowerSummary.PresentStatus.InternalFailure, Type: Input, ReportID: 0x32, Offset: 7, Size: 1, Value: 0.00 Path: UPS.PowerSummary.PresentStatus.ShutdownImminent, Type: Input, ReportID: 0x32, Offset: 9, Size: 1, Value: 0.00 Path: UPS.PowerSummary.PresentStatus.ACPresent, Type: Input, ReportID: 0x32, Offset: 16, Size: 1, Value: 1.00 Path: UPS.PowerSummary.PresentStatus.BelowRemainingCapacityLimit, Type: Input, ReportID: 0x32, Offset: 18, Size: 1, Value: 0.00 Path: UPS.PowerSummary.PresentStatus.FullyCharged, Type: Input, ReportID: 0x32, Offset: 19, Size: 1, Value: 1.00 Path: UPS.PowerSummary.PresentStatus.Charging, Type: Input, ReportID: 0x32, Offset: 20, Size: 1, Value: 0.00 Path: UPS.PowerSummary.PresentStatus.Discharging, Type: Input, ReportID: 0x32, Offset: 21, Size: 1, Value: 0.00 Path: UPS.PowerSummary.PresentStatus.FullyDischarged, Type: Input, ReportID: 0x32, Offset: 22, Size: 1, Value: 0.00 Path: UPS.PowerSummary.PresentStatus.NeedReplacement, Type: Input, ReportID: 0x32, Offset: 23, Size: 1, Value: 0.00
Re: [Nut-upsuser] driver for HP/Compaq T750 ?
2009/3/1 KP Kirchdoerfer kap...@bering-uclibc.de Hello; Am Sonntag, 1. März 2009 19:42:08 schrieb Arnaud Quette: 2009/2/27 KP Kirchdoerfer kap...@bering-uclibc.de Am Freitag, 27. Februar 2009 18:35:11 schrieb Arnaud Quette: 2009/2/27 KP Kirchdoerfer kap...@bering-uclibc.de Am Donnerstag, 26. Februar 2009 20:37:56 schrieben Sie: Citeren KP Kirchdoerfer kap...@bering-uclibc.de: [...] And the upshid-ups driver ends with: No matching HID UPS found Driver failed to start (exit status=1) Try this driver again, but make sure to add productid = 1f06 to the ups.conf entry for this device. Chances are that it is a re-branded Tripplite unit (we've seen other HP units that are actually this brand). Unfortunately the same result... (Driver failed to start...) any more hints? lsusb -vv -d 03f0:1f06 see below also test bcmxcp or bcmxcp_usb Also these does not work... kp ok, we've confirmed the exact type of device and so the driver is really *usbhid-ups* now, your vendor/productIDs are not yet supported, so you need to do: usbhid-ups -DD -u root -x explore -x vendorid=3f0 -a compaq-ups this should give us more info ;-) Assuming you meant vendorid 03f0 I really get a lot of information... see below. (sorry if that much of information is annyoing in the users list, hopefully it will be the last time). we'll then see if we can easily add it... would be cool (...) congrats, it is! either checkout the latest trunk or apply the attached patch. thanks to confirm that the reported data looks coherent (particularly the battery.voltage) and that the standard tests runs (ie OB and OB LB + potential commands like tests...) an upsc + upsrw + upscmd output is welcome. also note that you will need an entry in the udev file. btw, it's a tripplite rebranded unit. cheers, Arnaud -- Linux / Unix Expert RD - Eaton - http://www.eaton.com/mgeops Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/ Debian Developer - http://people.debian.org/~aquette/ Free Software Developer - http://arnaud.quette.free.fr/ Index: drivers/tripplite-hid.c === --- drivers/tripplite-hid.c (révision 1797) +++ drivers/tripplite-hid.c (copie de travail) @@ -84,6 +84,8 @@ /* HP R/T 2200 INTL (like SMART2200RMXL2U) */ { USB_DEVICE(HP_VENDORID, 0x1f0a), battery_scale_1dot0 }, + /* HP T750 INTL */ + { USB_DEVICE(HP_VENDORID, 0x1f0a), battery_scale_1dot0 }, /* Terminating entry */ { -1, -1, NULL } ___ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
Re: [Nut-upsuser] driver for HP/Compaq T750 ?
Am Sonntag, 1. März 2009 20:57:21 schrieb Arnaud Quette: 2009/3/1 KP Kirchdoerfer kap...@bering-uclibc.de we'll then see if we can easily add it... would be cool (...) congrats, it is! either checkout the latest trunk or apply the attached patch. thanks to confirm that the reported data looks coherent (particularly the battery.voltage) and that the standard tests runs (ie OB and OB LB + potential commands like tests...) an upsc + upsrw + upscmd output is welcome. also note that you will need an entry in the udev file. btw, it's a tripplite rebranded unit. Geez, that's really fast. Sounds promising :) It may take some more days, but for shure I have to have the UPS working sometime, I do have a start, and therefor I'll certainly give feedback ASAP. thx very much! kp ___ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
Re: [Nut-upsuser] driver for HP/Compaq T750 ?
On Fri, Feb 27, 2009 at 1:37 PM, KP Kirchdoerfer kap...@bering-uclibc.de wrote: Am Freitag, 27. Februar 2009 19:34:11 schrieb Kjell Claesson: fredag 27 februari 2009 19:09:27 skrev KP Kirchdoerfer: Am Freitag, 27. Februar 2009 18:54:00 schrieben Sie: fredag 27 februari 2009 18:48:58 skrev KP Kirchdoerfer: 8snip--- If you ask me to run upsdrvctl with -D I'll don't geht more information than before: /sbin/upsdrvctl -D start compaq-ups Network UPS Tools - UPS driver controller 2.2.2 Starting UPS: compaq-ups Network UPS Tools: 0.29 USB communication driver - core 0.33 (2.2.2) No matching HID UPS found Driver failed to start (exit status=1) You can rise the debug level by adding D. So try -DDD . I have not worked with the usbups_hid driver but it should give some more info. Yep; I tried that also, but didn't got more output There's a subtle difference here - adding '-D' to the upsdrvctl command line increases the verbosity of upsdrvctl, not the driver that it starts. For testing, you would want something like: /lib/nut/usbhid-ups -D -a compaq-ups As Kjell mentioned, the nut-upsdev list is a better place for usbsnoop logs and whatnot, if we can't figure it out with the basic debug output. -- - Charles Lepple ___ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
Re: [Nut-upsuser] driver for HP/Compaq T750 ?
lördag 28 februari 2009 16:36:54 skrev Charles Lepple: There's a subtle difference here - adding '-D' to the upsdrvctl command line increases the verbosity of upsdrvctl, not the driver that it starts. For testing, you would want something like: /lib/nut/usbhid-ups -D -a compaq-ups As Kjell mentioned, the nut-upsdev list is a better place for usbsnoop logs and whatnot, if we can't figure it out with the basic debug output. You are right Charles, I must have been sleeping. The only thing I was thinking that it was strange debug output :-) So KP you should run the driver only, not through the upsdrvctl. By running it like Charles say, you should get some more debug info out. /Kjell ___ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
Re: [Nut-upsuser] driver for HP/Compaq T750 ?
Am Samstag, 28. Februar 2009 16:36:54 schrieb Charles Lepple: On Fri, Feb 27, 2009 at 1:37 PM, KP Kirchdoerfer kap...@bering-uclibc.de wrote: Am Freitag, 27. Februar 2009 19:34:11 schrieb Kjell Claesson: fredag 27 februari 2009 19:09:27 skrev KP Kirchdoerfer: Am Freitag, 27. Februar 2009 18:54:00 schrieben Sie: fredag 27 februari 2009 18:48:58 skrev KP Kirchdoerfer: 8snip--- If you ask me to run upsdrvctl with -D I'll don't geht more information than before: /sbin/upsdrvctl -D start compaq-ups Network UPS Tools - UPS driver controller 2.2.2 Starting UPS: compaq-ups Network UPS Tools: 0.29 USB communication driver - core 0.33 (2.2.2) No matching HID UPS found Driver failed to start (exit status=1) You can rise the debug level by adding D. So try -DDD . I have not worked with the usbups_hid driver but it should give some more info. Yep; I tried that also, but didn't got more output There's a subtle difference here - adding '-D' to the upsdrvctl command line increases the verbosity of upsdrvctl, not the driver that it starts. For testing, you would want something like: /lib/nut/usbhid-ups -D -a compaq-ups As Kjell mentioned, the nut-upsdev list is a better place for usbsnoop logs and whatnot, if we can't figure it out with the basic debug output. Ok, I tried a few drivers: /lib/nut/upscode2 -D -D -a compaq-ups Network UPS Tools - UPScode II UPS driver 0.85 (2.2.2) Copyright (C) 2001-2002 H K Lygre, hkly...@online.no Copyright (C) 2004-2006 Niels Baggesen ni...@baggesen.net Copyright (C) 2006 Niklas Edmundsson ni...@acc.umu.se Warning: This is an experimental driver. Some features may not function correctly. debug level is '2' upscode2 version 0.85 input_timeout = 2 Sec output_pace = 200 uSec full_update_timer = 60 Sec use_crlf = 0 use_pre_lf = 0 Missing UPCL after UPCL No contact with UPS, delaying init. Missing UPCL after UPCL No contact with UPS, delaying init. lib/nut/bcmxcp -D -D -a compaq-ups Network UPS Tools - BCMXCP UPS driver 0.14 (2.2.2) Warning: This is an experimental driver. Some features may not function correctly. debug level is '2' Attempting to autodect baudrate Receive error (PW_COMMAND_START_BYTE): -1!!! Receive error (PW_COMMAND_START_BYTE): -1!!! Receive error (PW_COMMAND_START_BYTE): -1!!! No response from UPS on /dev/ttyS1 with baudrate 1200 Receive error (PW_COMMAND_START_BYTE): -1!!! and so on... and finally usb: /lib/nut/usbhid-ups -D -D -a compaq-ups Network UPS Tools: 0.29 USB communication driver - core 0.33 (2.2.2) debug level is '2' upsdrv_initups... Checking device (03F0/1F06) (001/002) - VendorID: 03f0 - ProductID: 1f06 - Manufacturer: unknown - Product: unknown - Serial Number: unknown - Bus: 001 Trying to match device Device does not match - skipping Checking device (1D6B/0001) (001/001) - VendorID: 1d6b - ProductID: 0001 - Manufacturer: unknown - Product: unknown - Serial Number: unknown - Bus: 001 Trying to match device Device does not match - skipping No appropriate HID device found No matching HID UPS found thx for your patience. kp ___ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
Re: [Nut-upsuser] driver for HP/Compaq T750 ?
Am Donnerstag, 26. Februar 2009 20:37:56 schrieben Sie: Citeren KP Kirchdoerfer kap...@bering-uclibc.de: [...] And the upshid-ups driver ends with: No matching HID UPS found Driver failed to start (exit status=1) Try this driver again, but make sure to add productid = 1f06 to the ups.conf entry for this device. Chances are that it is a re-branded Tripplite unit (we've seen other HP units that are actually this brand). Unfortunately the same result... (Driver failed to start...) any more hints? regards kp ___ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
Re: [Nut-upsuser] driver for HP/Compaq T750 ?
2009/2/27 KP Kirchdoerfer kap...@bering-uclibc.de Am Donnerstag, 26. Februar 2009 20:37:56 schrieben Sie: Citeren KP Kirchdoerfer kap...@bering-uclibc.de: [...] And the upshid-ups driver ends with: No matching HID UPS found Driver failed to start (exit status=1) Try this driver again, but make sure to add productid = 1f06 to the ups.conf entry for this device. Chances are that it is a re-branded Tripplite unit (we've seen other HP units that are actually this brand). Unfortunately the same result... (Driver failed to start...) any more hints? lsusb -vv -d 03f0:1f06 also test bcmxcp or bcmxcp_usb Arnaud -- Linux / Unix Expert RD - Eaton - http://www.eaton.com/mgeops Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/ Debian Developer - http://people.debian.org/~aquette/ Free Software Developer - http://arnaud.quette.free.fr/ ___ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
Re: [Nut-upsuser] driver for HP/Compaq T750 ?
Am Freitag, 27. Februar 2009 18:35:11 schrieb Arnaud Quette: 2009/2/27 KP Kirchdoerfer kap...@bering-uclibc.de Am Donnerstag, 26. Februar 2009 20:37:56 schrieben Sie: Citeren KP Kirchdoerfer kap...@bering-uclibc.de: [...] And the upshid-ups driver ends with: No matching HID UPS found Driver failed to start (exit status=1) Try this driver again, but make sure to add productid = 1f06 to the ups.conf entry for this device. Chances are that it is a re-branded Tripplite unit (we've seen other HP units that are actually this brand). Unfortunately the same result... (Driver failed to start...) any more hints? lsusb -vv -d 03f0:1f06 see below also test bcmxcp or bcmxcp_usb Also these does not work... kp Bus 001 Device 002: ID 03f0:1f06 Hewlett-Packard Device Descriptor: bLength18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x03f0 Hewlett-Packard idProduct 0x1f06 bcdDevice0.00 iManufacturer 4 Hewlett-Packard iProduct 36 T750 INTL iSerial50 2CJ5380638 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 34 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 50mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 0 No Subclass bInterfaceProtocol 0 None iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType33 bcdHID 1.11 bCountryCode 33 US bNumDescriptors 1 bDescriptorType34 Report wDescriptorLength 900 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes3 Transfer TypeInterrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 248 Device Status: 0x0003 Self Powered Remote Wakeup Enabled ___ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
Re: [Nut-upsuser] driver for HP/Compaq T750 ?
fredag 27 februari 2009 18:35:11 skrev Arnaud Quette: 2009/2/27 KP Kirchdoerfer kap...@bering-uclibc.de 8---snip-- Try this driver again, but make sure to add productid = 1f06 to the ups.conf entry for this device. Chances are that it is a re-branded Tripplite unit (we've seen other HP units that are actually this brand). Unfortunately the same result... (Driver failed to start...) any more hints? lsusb -vv -d 03f0:1f06 also test bcmxcp or bcmxcp_usb This would not work as the vendor product id is hardcoded in the nut_usb.c I can not recognise the look of the ups. So I can not say if it is a re-branded version. Regards Kjell ___ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
Re: [Nut-upsuser] driver for HP/Compaq T750 ?
fredag 27 februari 2009 18:48:58 skrev KP Kirchdoerfer: 8snip--- Bus 001 Device 002: ID 03f0:1f06 Hewlett-Packard Device Descriptor: bLength18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x03f0 Hewlett-Packard idProduct 0x1f06 bcdDevice0.00 iManufacturer 4 Hewlett-Packard iProduct 36 T750 INTL iSerial50 2CJ5380638 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 34 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 50mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 0 No Subclass bInterfaceProtocol 0 None iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType33 bcdHID 1.11 bCountryCode 33 US bNumDescriptors 1 bDescriptorType34 Report wDescriptorLength 900 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes3 Transfer TypeInterrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 248 Device Status: 0x0003 Self Powered Remote Wakeup Enabled This look like a hid device. Have you tested the usbhid_ups driver in debug mode. /Kjell ___ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
Re: [Nut-upsuser] driver for HP/Compaq T750 ?
fredag 27 februari 2009 19:09:27 skrev KP Kirchdoerfer: Am Freitag, 27. Februar 2009 18:54:00 schrieben Sie: fredag 27 februari 2009 18:48:58 skrev KP Kirchdoerfer: 8snip--- If you ask me to run upsdrvctl with -D I'll don't geht more information than before: /sbin/upsdrvctl -D start compaq-ups Network UPS Tools - UPS driver controller 2.2.2 Starting UPS: compaq-ups Network UPS Tools: 0.29 USB communication driver - core 0.33 (2.2.2) No matching HID UPS found Driver failed to start (exit status=1) You can rise the debug level by adding D. So try -DDD . I have not worked with the usbups_hid driver but it should give some more info. /Kjell ___ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
Re: [Nut-upsuser] driver for HP/Compaq T750 ?
fredag 27 februari 2009 19:37:42 skrev KP Kirchdoerfer: You can rise the debug level by adding D. So try -DDD . I have not worked with the usbups_hid driver but it should give some more info. Yep; I tried that also, but didn't got more output OK, then we have a bastard ;-( The only thing I can think of is to make a snoop of the traffic. This may be done by a windows machine running the original driver and the usbsnoop program. The SnoopyPro-0.22 on SF is one sniffer. This can be tricky sometimes to get a good log, but it can tell us if it is a known protocol or something HP have come up with. /Kjell P.S. If your up for this, take it to the nut-upsdev list. ___ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
Re: [Nut-upsuser] driver for HP/Compaq T750 ?
2009/2/26 Charles Lepple clep...@gmail.com On Wed, Feb 25, 2009 at 1:54 PM, KP Kirchdoerfer kap...@bering-uclibc.de wrote: Hi, I own a UPS HP T750. Is there a driver for this UPS (either serial or USB)? As you may have already seen, we don't have an entry for this UPS in data/drivers.list yet. However, HP often repackages other vendors' equipment. Does the documentation mention what software is used to monitor the UPS on Windows? Often this is a clue as to what is inside. knowing the OS you're running would also help... for example, on Linux for USB, you could run lsusb to help determine the rebrand originator and so the potential driver needed. My guess is that it's either Powerware (so bcmxcp_* or usbhid-ups) or Apc (so apcsmart or usbhid-ups) Arnaud -- Linux / Unix Expert RD - Eaton - http://www.eaton.com/mgeops Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/ Debian Developer - http://people.debian.org/~aquette/ Free Software Developer - http://arnaud.quette.free.fr/ ___ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
Re: [Nut-upsuser] driver for HP/Compaq T750 ?
Am Donnerstag, 26. Februar 2009 12:01:41 schrieb Arnaud Quette: 2009/2/26 Charles Lepple clep...@gmail.com On Wed, Feb 25, 2009 at 1:54 PM, KP Kirchdoerfer kap...@bering-uclibc.de wrote: Hi, I own a UPS HP T750. Is there a driver for this UPS (either serial or USB)? As you may have already seen, we don't have an entry for this UPS in data/drivers.list yet. However, HP often repackages other vendors' equipment. Does the documentation mention what software is used to monitor the UPS on Windows? Often this is a clue as to what is inside. AFAIK native HP software. knowing the OS you're running would also help... yes, sorry; I'm running Debian Lenny. for example, on Linux for USB, you could run lsusb to help determine the lsusb just shows Hewlett Packard... Bus 001 Device 002: ID 03f0:1f06 Hewlett-Packard rebrand originator and so the potential driver needed. My guess is that it's either Powerware (so bcmxcp_* or usbhid-ups) or Apc (so apcsmart or usbhid-ups) Unfortunately none of these worked; the errors are varying: with apcsmart Unable to detect an APC Smart protocol UPS on port /dev/ttyS1 Check the cabling, port name or model name and try again similar message with the bcmxcp driver; the upscode2 driver gives: Missing UPCL after UPCL No contact with UPS, delaying init. And the upshid-ups driver ends with: No matching HID UPS found Driver failed to start (exit status=1) regards kp ___ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
Re: [Nut-upsuser] driver for HP/Compaq T750 ?
Citeren KP Kirchdoerfer kap...@bering-uclibc.de: [...] And the upshid-ups driver ends with: No matching HID UPS found Driver failed to start (exit status=1) Try this driver again, but make sure to add productid = 1f06 to the ups.conf entry for this device. Chances are that it is a re-branded Tripplite unit (we've seen other HP units that are actually this brand). Best regards, Arjen -- Please keep list traffic on the list ___ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
[Nut-upsuser] driver for HP/Compaq T750 ?
Hi, I own a UPS HP T750. Is there a driver for this UPS (either serial or USB)? thx kp ___ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
Re: [Nut-upsuser] driver for HP/Compaq T750 ?
On Wed, Feb 25, 2009 at 1:54 PM, KP Kirchdoerfer kap...@bering-uclibc.de wrote: Hi, I own a UPS HP T750. Is there a driver for this UPS (either serial or USB)? As you may have already seen, we don't have an entry for this UPS in data/drivers.list yet. However, HP often repackages other vendors' equipment. Does the documentation mention what software is used to monitor the UPS on Windows? Often this is a clue as to what is inside. -- - Charles Lepple ___ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser