Thanks Thomas,
I finally completed installation of library as follows:
Fresh installation of TSM v5.2.2.0 with 3582L23 Gen2 drives,
Device Drivers(5.0.6.7)used :
IBM 3582LTO Library.
IBM ULT3580-TD2 SCSI Sequential Device ( for Tivoli Storage Manager ).
Disabled changer0 on Windows RSM. (unchecked enable library).
Disabled all drives on RSM.
TSM library:
DEFINE LIBRARY 3582 LIBTYPE=SCSI SERIAL=013022081000 SHARED=NO
DEFINE DRIVE 3582 3580D1 ELEMENT=257 ONLINE=Yes WWN=500308C13D2C0006
SERIAL=1110007877
DEFINE DRIVE 3582 3580D2 ELEMENT=257 ONLINE=Yes WWN=500308C13D2C0003
SERIAL=1110008214
DEFINE PATH TERHITTSM1 3582 SRCTYPE=SERVER DESTTYPE=LIBRARY DEVICE=lb0.1.0.4
ONLINE=YES
DEFINE PATH TERHITTSM1 3580D1 SRCTYPE=SERVER DESTTYPE=DRIVE LIBRARY=3582
DEVICE=mt0.0.0.3 ONLINE=YES
DEFINE PATH TERHITTSM1 3580D2 SRCTYPE=SERVER DESTTYPE=DRIVE LIBRARY=3582
DEVICE=mt0.0.0.4 ONLINE=YES
Thanks for you valuable information, which help me to install tape library
sucessfully.
Thanks,
CRC,
C.R.Chandrasekhar.
Systems Analyst.
Tivoli Certified Consultant (TSM).
TIMKEN Engineering Research - INDIA (P) Ltd., Bangalore.
Phone No: 91-80-5536113 Ext:3032.
Email:[EMAIL PROTECTED]
-Original Message-
From: Bleicher, Thomas [mailto:[EMAIL PROTECTED]
Sent: Tuesday, March 23, 2004 6:48 PM
To: [EMAIL PROTECTED]
Subject: AW: 3582-driver installation steps on Win2k server (TSM v5.2.2)
This error-Messages looks to me like an error
generated by Windows. (BTW: What does the event log
say about the error?) You don't have to configure
the changer at all for Windows. It should be controlled
by the TSM Device Driver from within TSM only.
Windows does not need to be able to talk to the library.
You only need the device manager to check the SAN connection ;)
Here is the details page of the library from IBM.
Look for the required driver and firmware levels (I think
you wanted to write 5.1.6.7 instead of 5.0.6.7, right?).
You can only check your installation by configuring the
library for TSM. On 2003 I only could be sure about the
setup after I defined the path to the lib in TSM and it
returned with no errors. See the Admin Guide about how
to configure the devices to use TSM drives on 2000.
Here is the information from the IBM site:
=
IBM 3582 Ultrium Scalable Configuration Information for IBM Tivoli Storage
Manager Server
Hints and tips
Abstract
Configuration Information for IBM 3582 Ultrium Scalable
Content
IBM ULT3582-TL
Model: ULT3582-TL
Drive Addresses: 256-257
Storage Slot Addresses: 4096-4118
Changer Address: 1
Entry/Exit Slot Addresses: 16
Notes:
1. Maximum numbers of drives and storage slots supported
2 drives 24 slots
2. Barcodes are supported.
3. The IBM device driver is required for IBM Ultrium 2 drives.
4. Device identification and firmware level
Library ID : IBM ULT3582-TL --- Firmware : 205B
Drive ID : IBM ULTRIUM-TD2 --- Firmware : 2B81
5. IBM 3582-TL does not report drive serial numbers.
6. The IBM device driver is required for the autoloader. The drivers are
available on the following ftp sites:
AIX : ftp://ftp.software.ibm.com/storage/devdrvr/AIX/
HP-UX : ftp://ftp.software.ibm.com/storage/devdrvr/HPUX/
Linux : ftp://ftp.software.ibm.com/storage/devdrvr/Linux/
Solaris : ftp://ftp.software.ibm.com/storage/devdrvr/Solaris/
Windows : ftp://ftp.software.ibm.com/storage/devdrvr/Windows/
7. The TSM device driver from version 5.1.6.5 to the latest 5.1 PTF version
can be used on the Windows platform. The TSM device driver version 5.2 does
not support IBM 3582.
-Ursprüngliche Nachricht-
Von: Chandrashekar, C. R. (Chandrasekhar)
[mailto:[EMAIL PROTECTED]
Gesendet: Dienstag, 23. März 2004 13:24
An: Bleicher, Thomas
Betreff: RE: 3582-driver installation steps on Win2k server
(TSM v5.2.2)
Hi TSM Gurus,
Iam getting following error after installation of device
drive (5.0.6.7 -
for Tivoli Storage Manager)for Tate Library 3582 LTO 2 on Windows 2000
server for TSM v5.2.2.0.
please help me.
Thanks,
CRC,
**
PLEASE NOTE: The above email address has recently changed from a previous naming
standard -- if this does not match your records, please update them to use this new
name in future email addressed to this individual.
This message and any attachments are intended for the
individual or entity named above. If you are not the intended
recipient, please do not forward, copy, print, use or disclose this
communication to others; also please notify the sender by
replying to this message, and then delete it from your system.
The Timken Company
**
