Re: [enterasys] Access - List Query no ICMP reply after applying access list
Hi, Can you supply a small network diagram with the IPs in it. I think you have messed the source and the target in the access list but I want to be sure. Best regards, Hugo Veiga 2016-01-27 10:22 GMT+00:00 Erik Auerswald <auersw...@fg-networking.de>: > Hello Pheko Mamabolo, > > the SecureStacks do not support the "established" keyword, and they do not > support to match on specific ICMP type / code. Thus you need to enable all > of ICMP. The extended ACL from your first email looks good, but it is bound > to the wrong interface. > > The SecureStacks support inbound ACLs only, so you need to bind the ACL to > the interface where the traffic enters the switch. You bound it to the > interface where the traffic exits the switch. > > Best regards, > Erik Auerswald > -- > Dipl.-Inform. Erik Auerswald http://www.fg-networking.de/ > auersw...@fg-networking.de T:+49-631-4149988-0 M:+49-176-64228513 > > Gesellschaft für Fundamental Generic Networking mbH > Geschäftsführung: Volker Bauer, Jörg Mayer > Gerichtsstand: Amtsgericht Kaiserslautern - HRB: 3630 > > On Wed, Jan 27, 2016 at 09:28:19AM +, Mamabolo, Pheko (GS IT IN SD AAE > OPS COL) wrote: > > Hi Enterasys Community, > > > > Please advise on how to enable ICMP reply from Enterasys B5G124-24 after > applying an extended access -list as it does not support command ip > access-list extended 'established' command. > > Our challenge is it not allowing us to receive ICMP reply after setting > the access list. I checked on different chassis the Enterasys S4 and on > this it works as the command ip access-list extended with established is > supported however not on the B5G124-24 please advise on a work around. > > > > With best regards, > > Pheko Mamabolo > > > > Siemens (Proprietary) Limited > > Global Service Information Technology > > IT Infrastructure Service Delivery > > Regions Asia, Pacific, Middle East and Africa > > Operational Service Back End Essential > > GS IT IN SD R AAE OPS BEE > > Tel.: +27 11 652-2938 > > Fax: +27 86 506-6018 > > Mobil: +27 82 487-9822 > > mailto:pheko.mamab...@siemens.com > > > > From: Mamabolo, Pheko (GS IT IN SD AAE OPS COL) [mailto: > pheko.mamab...@siemens.com] > > Sent: 13 January 2016 02:51 PM > > To: Enterasys Customer Mailing List > > Cc: Caeiro, Jorge; Guemadi, Mohamed-Lamine (GS IT R AAE BN BAN) > > Subject: RE:[Enterasys] Access - List Query I do not receive ICMP reply > after applying my access list > > > > Dears, > > > > Please assist I am not able to receive ICMP echo reply after applying > ACL that specifically permits certain networks to do this. > > An example of my access list > > > > access-list 111 permit ICMP 172.16.49.0 0.0.0.3 67.67.67.67 > > interface vlan 431 > > ip access-group 111 in sequence 1 > > ip address 67.67.67.67 > > > > I have also applied ip ICMP redirect enable globally and also on the > interface. > > > > Is there some type established command missing and what is the syntax as > the B5 Layer 3 switch I am working on is not supporting such a command. > > > > "permit tcp 172.16.49.0 0.0.0.3 established 67.67.67.67 0.0.0.31" this > is not available on the B5G124-24 switch? > > > > Please advise!! > > > > With best regards, > > Pheko Mamabolo > > > > Siemens (Proprietary) Limited > > Global Service Information Technology > > IT Infrastructure Service Delivery > > Regions Asia, Pacific, Middle East and Africa > > Operational Service Back End Essential > > GS IT IN SD R AAE OPS BEE > > Tel.: +27 11 652-2938 > > Fax: +27 86 506-6018 > > Mobil: +27 82 487-9822 > > mailto:pheko.mamab...@siemens.com > > > > > > > > > > Disclaimer and Confidentiality Note > > This e-mail communication, its attachments, if any, and any rights > attaching to it are, unless the context clearly indicates otherwise, the > property of Siemens (Pty) Ltd. It is confidential, private and intended for > the addressee only. If you are not the intended recipient and receive this > communication in error, you are hereby notified that any review, copying, > use, discloser or distribution in any manner whatsoever is strictly > prohibited. Please notify the sender immediately that you have received > this e-mail in error and delete the e-mail and any copies of it. Views and > opinions expressed in this e-mail are those of the sender unless clearly > stated as those of Siemens (Pty) Ltd. Siemens (Pty) Ltd accepts no > liability for any loss or damage w
Re: [enterasys] snooptask
Hi, Thats disk defragmentation. :))) 2014-09-18 14:47 GMT+01:00 Patrick Printz ppri...@qcc.mass.edu: Anyone know what this handles? Some of our switches are getting spikes up to 50% on this process during the night. It is happening almost consistently each night. *Patrick Printz* *Network Infrastructure* Quinsigamond Community College 670 West Boylston Street Worcester, MA 01606-2092 w. 508-854-7517 c. 508-726-9529 When technology fails you, just call the help desk. *X4427 / h...@qcc.mass.edu h...@qcc.mass.edu* The business of life is the acquisition of memories. In the end that’s all there is. - Mr. Carlson - --To unsubscribe from enterasys, send email to lists...@unc.edu with the body: unsubscribe enterasys hve...@ubi.pt --- To unsubscribe from enterasys, send email to lists...@unc.edu with the body: unsubscribe enterasys arch...@mail-archive.com
Re: [enterasys] client communication issue on C5G
Hi, Can you put a simple diagram with all switchs between the server and the gateway. Please indicate port numbers for all uplinks, gateway and server. Also indicate switch name and if possible do show vlan portinfo port *.*.* ; show spantree stats port *.*.* ; show port status on all of them. At the gateway also do a router show running Regrads, Hugo Veiga 2014-05-13 18:52 GMT+01:00 Gradelain Ngouni gradelain.ngo...@scaltel.de: Hello John, thanks for your thoughts so far. What has not been done yet is: - Capturing the packets I even disable the authentication on the port bus still no success: I have a feeling that something is going wrong with the switch?? Many thanks Gradelain *Gradelain Ngouni* Dipl. -Ing. IT-Projektleiter SCALTEL AG Anna-Birle-Str. 2 55252 Mainz-Kastel Telefon +49 6134 50789-23 Telefax +49 (0) 6134 50789-10 gradelain.ngo...@scaltel.de Rechtsform: Aktiengesellschaft Registergericht: Kempten HRB 7208 Sitz: Waltenhofen Vorstandsvorsitzender: Christian Skala Vorstand: Joachim Skala Aufsichtsratsvorsitzender: Alfons Hörmann ** *Technologie-Forum 2014 * *IT-Projekte im Mittelstand - Zukunftssichere Investitionen* Es ist wieder soweit! Das SCALTEL Technologie-Forum öffnet im Mai seine Pforten. Unsere *Kunden *berichten *als Referenten* praxisnah über *umgesetzte Projekte*. Alle Technologien des SCALTEL Portfolios gibt es hautnah an den zahlreichen Live-Demo-Ständen zum Anfassen. Erhalten Sie wertvolle *Tipps und Erkenntnisse*, um Ihre IT-Projekte erfolgreich voranzutreiben * 15. Mai in Wiesbaden22. Mai in Kempten* Mehr zum Technologie-Forum und den Referenten finden Sie hier: Websitehttp://www.scaltel.de/technologie-forum-wth-wi-2014.html . Nutzen Sie die Chance und sichern Sie sich hier Ihre Teilnahme: Anmeldeformular http://www.scaltel.de/anmeldeformular.html *In Kooperation mit:* - --To unsubscribe from enterasys, send email to lists...@unc.edu with the body: unsubscribe enterasys hve...@ubi.pt --- To unsubscribe from enterasys, send email to lists...@unc.edu with the body: unsubscribe enterasys arch...@mail-archive.com
Re: [enterasys] Roam About Switch Manager
Hi all, Found one solution. stop the service Delete the services-db folder in the c:\program files\enterasys networks\RASM\ directory start the service Regards, Hugo Veiga 2013/11/4 Nick Allen nick.al...@tbwa.com Not me I'm afraid Hugo, but if you end up having to, you can reinstall RASM, you can pull the config back from the RBT unit into RASM. Nick. On Fri, Nov 1, 2013 at 5:49 PM, Hugo Veiga hve...@ubi.pt wrote: Hi all, I have Roam About Switch Manager version 7.1.5.2.0 today I had to reboot the server and I can't reload the application. It says: Server information: Initialization Failure: One or more server modules have not started successfully. This can lead to failures when accessing and viewing data. Please check the log. In the Log: THROW: null java.lang.NullPointerException at org.exist.storage.NativeBroker$NodeRef.init(NativeBroker.java:2980) at org.exist.storage.dom.DOMFile.findValue(DOMFile.java:1336) at org.exist.storage.dom.DOMFile.get(DOMFile.java:1476) at org.exist.storage.NativeBroker$20.start(NativeBroker.java:2802) at org.exist.storage.dom.DOMTransaction.run(DOMTransaction.java:111) at org.exist.storage.NativeBroker.objectWith(NativeBroker.java:2800) at org.exist.storage.NativeBroker$21.start(NativeBroker.java:2828) at org.exist.storage.dom.DOMTransaction.run(DOMTransaction.java:111) at org.exist.storage.NativeBroker.objectWith(NativeBroker.java:2820) at org.exist.dom.DocumentImpl.getChildNodes(DocumentImpl.java:696) at org.exist.storage.serializers.NativeSerializer.serializeToReceiver(NativeSerializer.java:88) at org.exist.storage.serializers.Serializer.toSAX(Serializer.java:749) at org.exist.xmldb.LocalXMLResource.getContentAsSAX(LocalXMLResource.java:282) at bru.e(SourceFile:169) at atg.a(SourceFile:106) at cax.a(SourceFile:125) at com.trapeze.fw.services.server.AbstractServiceContainer.startServices(SourceFile:295) at com.trapeze.appl.rm.server.services.RMServiceContainer.startServices(SourceFile:84) at z.a(SourceFile:392) at afh.a(SourceFile:59) at com.trapeze.appl.rm.server.services.RMServicesWrapper$a.run(SourceFile:46) Can anyone help, Best regards, Hugo Veiga - --To unsubscribe from enterasys, send email to listserv@unc.eduwith the body: unsubscribe enterasys nick.al...@tbwa.com -- This e-mail is intended only for the named person or entity to which it is addressed and contains valuable business information that is proprietary, privileged, confidential and/or otherwise protected from disclosure. If you received this e-mail in error, any review, use, dissemination, distribution or copying of this e-mail is strictly prohibited. Please notify us immediately of the error via e-mail to wrong.recipi...@uk-group.net and please delete the e-mail from your system, retaining no copies in any media. We appreciate your cooperation. - --To unsubscribe from enterasys, send email to lists...@unc.edu with the body: unsubscribe enterasys hve...@ubi.pt --- To unsubscribe from enterasys, send email to lists...@unc.edu with the body: unsubscribe enterasys arch...@mail-archive.com
[enterasys] Roam About Switch Manager
Hi all, I have Roam About Switch Manager version 7.1.5.2.0 today I had to reboot the server and I can't reload the application. It says: Server information: Initialization Failure: One or more server modules have not started successfully. This can lead to failures when accessing and viewing data. Please check the log. In the Log: THROW: null java.lang.NullPointerException at org.exist.storage.NativeBroker$NodeRef.init(NativeBroker.java:2980) at org.exist.storage.dom.DOMFile.findValue(DOMFile.java:1336) at org.exist.storage.dom.DOMFile.get(DOMFile.java:1476) at org.exist.storage.NativeBroker$20.start(NativeBroker.java:2802) at org.exist.storage.dom.DOMTransaction.run(DOMTransaction.java:111) at org.exist.storage.NativeBroker.objectWith(NativeBroker.java:2800) at org.exist.storage.NativeBroker$21.start(NativeBroker.java:2828) at org.exist.storage.dom.DOMTransaction.run(DOMTransaction.java:111) at org.exist.storage.NativeBroker.objectWith(NativeBroker.java:2820) at org.exist.dom.DocumentImpl.getChildNodes(DocumentImpl.java:696) at org.exist.storage.serializers.NativeSerializer.serializeToReceiver(NativeSerializer.java:88) at org.exist.storage.serializers.Serializer.toSAX(Serializer.java:749) at org.exist.xmldb.LocalXMLResource.getContentAsSAX(LocalXMLResource.java:282) at bru.e(SourceFile:169) at atg.a(SourceFile:106) at cax.a(SourceFile:125) at com.trapeze.fw.services.server.AbstractServiceContainer.startServices(SourceFile:295) at com.trapeze.appl.rm.server.services.RMServiceContainer.startServices(SourceFile:84) at z.a(SourceFile:392) at afh.a(SourceFile:59) at com.trapeze.appl.rm.server.services.RMServicesWrapper$a.run(SourceFile:46) Can anyone help, Best regards, Hugo Veiga --- To unsubscribe from enterasys, send email to lists...@unc.edu with the body: unsubscribe enterasys arch...@mail-archive.com
[enterasys] System service-acl
Hi, Any one tried to use the service-acl / service-class to restrict access to a C3K. It's not working for me! I can still telnet from source-ip's not in the list! I used this commands: # permit traffic from 192.168.69.0/24 , 10.254.0.0/16 and 192.168.100.1/32 set system service-acl management permit ip-source 192.168.69.0 wildcard 0.0.0.255 priority 1 set system service-acl management permit ip-source 10.254.0.0 wildcard 0.0.255.255 priority 2 set system service-acl management permit ip-source 192.168.100.1 wildcard 255.255.255.255 priority 3 set system service-class management Best regards, Hugo Veiga --- To unsubscribe from enterasys, send email to lists...@unc.edu with the body: unsubscribe enterasys arch...@mail-archive.com
Re: [enterasys] B3 Routing between VLANs
Hi, Let’s say for example that you have a enterasys core, this will work with any other equipment that is L3 capable. And this is the logical topology: Enterasys Core “fe.1.1” --300 mile (untagged frames)--“fe.1.1” B3 Let’s say that you have the IP's 192.168.0.0/16 in the B3 You should do P2P routing between your core and the B3. So in the core you create a vlan 1000 and put it untagged in the port that connects to the operator. In the core: Set port vlan fe.1.1 1000 modify-egress interface vlan 1000 ip address 10.0.0.1 255.255.255.248 no shutdown Create a route like this: Route 192.168.0.0 255.255.0.0 10.0.0.2 In the B3: Set port vlan fe.1.1 1000 modify-egress Create the same vlan: Interface vlan 1000 Ip address 10.0.0.2 255.255.255.248 No shutdown Create a route like this: Route 0.0.0.0 0.0.0.0 10.0.0.1 Create all the other vlans you want in the B3 and create the interface vlan for them, the gateway for the computers. This should do the trick. Best regards, Hugo Veiga 2012/5/23 tsp+entera...@iip.lu Hi, I have not used a B3... but usually, you go into router mode, configure vlan interfaces, assign them IPs, don't forget no shutdown, etc. Or what are the specific problems that you are expecting with your setup? On 23-May-12 18:45, Michael Paul wrote: I have a B3 switch that I need to enable routing between VLANs. --- To unsubscribe from enterasys, send email to lists...@unc.edu with the body: unsubscribe enterasys hve...@ubi.pt --- To unsubscribe from enterasys, send email to lists...@unc.edu with the body: unsubscribe enterasys arch...@mail-archive.com
[enterasys] G3 LACP
Hi, Anyone knows what is the algorithm that is used by LACP in G3 series? Regards, Hugo Veiga UBI amiga do ambiente: Antes de imprimir este e-mail pense bem se tem mesmo que o fazer. As árvores são um bem imprescindível. --- To unsubscribe from enterasys, send email to lists...@unc.edu with the body: unsubscribe enterasys arch...@mail-archive.com
[enterasys] Goodies
Hi, I've made a flex view that tells how long a port is up or down (days, hour, minutes and seconds). We use this to identify ports with our users just by telling them to connect or disconnect the cable. It also identifies how many times a port changed from forward state. I believe its a nice tool and that can be pretty useful to others. If you have any doubt just ring the bell. For last, if you are making flex views can you share with others? Regards, Hugo Veiga UBI amiga do ambiente: Antes de imprimir este e-mail pense bem se tem mesmo que o fazer. As árvores são um bem imprescindível. --- To unsubscribe from enterasys, send email to lists...@unc.edu with the body: unsubscribe enterasys arch...@mail-archive.com?xml version=1.0 encoding=UTF-8? flextablelist version=4.1.0.72 flextable autoExportCsvTextDelineation=DQUOTE autoExportFrequencyUnit=Minutes autoExportFormat=HTML showHorizontalLines=true autoExportFilename= autoExportFileManagement=Replace highlightBackground=153,255,255,255 class=com.enterasys.netsight.console.client.flexview.FvTable id=LastPortChange columnSelectionAllowed=false autoCreateColumnsFromModel=false autoExportAllowed=false autoExportCsvFieldDelimiter=CommaLastPortChange tableModelcom.ets.nac.tables.TbModel/tableModel column comparator=com.ets.flextable.col.IntStringComparator id=0 sortOrder=descending class=com.enterasys.netsight.console.client.flexview.FvColumn fixed=true hidden=trueReqID notes/notes dataFieldOID::ReqID:::SNMP::ReqID/dataField/column column comparator=com.ets.nac.tables.TbCompOid id=1 width=127 sortOrder=descending class=com.enterasys.netsight.console.client.flexview.FvColumn fixed=true modelIndex=1IP Address notes/notes dataFieldOID::IP Address:::SNMP::IP Address/dataField/column column comparator=com.ets.nac.tables.TbCompOid id=2 sortOrder=descending class=com.enterasys.netsight.console.client.flexview.FvColumn fixed=true modelIndex=2Instance notes/notes dataFieldOID::Instance:::SNMP::Instance/dataField/column column comparator=com.ets.flextable.col.VarStringComparator id=104 width=68 sortOrder=descending class=com.enterasys.netsight.console.client.flexview.FvColumn modelIndex=3ifName notesThe ifName Column gives the actual front panel port description to the user./notes dataFieldOID::ifName:::SNMP::SNMP;false;15;3;false;false;4;2;0;0;0;0/dataField/column column comparator=com.ets.nac.tables.TbCompExpression id=113 width=28 sortOrder=descending class=com.enterasys.netsight.console.client.flexview.FvColumn cellRenderer=com.ets.nac.tables.TbRendExpression modelIndex=4type notesBlue not down Red - Never has been up green - down for 5 minutes yellow - down for more then 5 min. but has been up since the switch is up/notes dataFieldSNMP::EXPR;true;2;4;false;false;1;2;0;0;0;0/dataField/column column comparator=com.ets.nac.tables.TbCompExpression id=114 width=151 sortOrder=descending class=com.enterasys.netsight.console.client.flexview.FvColumn cellRenderer=com.ets.nac.tables.TbRendNoIconExpression modelIndex=5Time notesProvides de days hours minutes and seconds since last change/notes dataFieldSNMP::EXPR;true;2;5;false;false;1;2;0;0;0;0/dataField/column column comparator=com.ets.nac.tables.TbCompExpression id=116 width=103 sortOrder=ascending class=com.enterasys.netsight.console.client.flexview.FvColumn sorted=true cellRenderer=com.ets.nac.tables.TbRendNoIconExpression modelIndex=6Fwd Transitions notesIF transitions lt uptime in days+10 -- GreenText if transitions lt 3*uptime in days+10 -- YellowText Otherwise --redtext/notes dataFieldSNMP::EXPR;true;2;6;false;false;1;2;0;0;0;0/dataField/column column comparator=com.ets.flextable.col.LongStringComparator id=115 width=57 sortOrder=descending class=com.enterasys.netsight.console.client.flexview.FvColumn hidden=true modelIndex=7ForwardTransitions notesThe ifName Column gives the actual front panel port description to the user./notes dataFieldOID::dot1dStpPortForwardTransitions:::SNMP::SNMP;false;65;7;false;false;4;2;0;0;0;0/dataField/column column comparator=com.enterasys.netsight.console.client.flexview.FvCompMibEnum id=101 width=66 sortOrder=descending class=com.enterasys.netsight.console.client.flexview.FvColumn modelIndex=8ifOperStatus notesThe ifOperStatus column provides the user with the current state of the port (Up, Down, Testing, Dormant etc)./notes dataFieldOID::ifOperStatus:::SNMP::SNMP;false;2;8;false;false;4;2;0;0;0;0/dataField/column column comparator=com.enterasys.netsight.console.client.flexview.FvCompMibEnum id=109 width=66 sortOrder=descending class=com.enterasys.netsight.console.client.flexview.FvColumn modelIndex=9ifAdminStatus
RE:[enterasys] COS for Cisco Phones
Hi, I have a very large implementation of cisco phones with Enterasys Networks. You don't have to configure nothing because the phone itself already configures the QoS that is needed and the Enterasys Equipment's respect that. You only have to set the vlan tagged to the phone that's it. If you are also connecting a computer in the phone then the vlan for the computer must be untagged. If you want to automatize the vlans to the phone you can also configure ciscoDP in your switches. You should never configure nothing in cos 7 because that is used for broadcast, spantree and other protocols needed by your network. Best regards, Hugo Veiga From: Hopkins, Bruce [mailto:bruce.hopk...@asurams.edu] Sent: quarta-feira, 20 de Julho de 2011 14:55 To: Enterasys Customer Mailing List Subject: [enterasys] COS for Cisco Phones We are putting in some cisco phones and we have a combination of B2,B3,B5 and C3 switches on the edge. I know how to push cos with policy manager but not really sure how to set it up through the console. Can someone give me a clue. Keep getting erros with the set cos commands so I must be missing something. The phoens will all be in their own vlan so I'll have to egress the phone vlan on all the ports, but I'm not sure what will need to be done to set the COS to 7. I don't really want to set upa policy as I've still got some other issues in this network I need to fix and policy manager could really screw it up right now. Any pointers would be appreciated. * --To unsubscribe from enterasys, send email to lists...@unc.edumailto:lists...@unc.edu with the body: unsubscribe enterasys hve...@ubi.ptmailto:hve...@ubi.pt UBI amiga do ambiente: Antes de imprimir este e-mail pense bem se tem mesmo que o fazer. As ?rvores s?o um bem imprescind?vel. --- To unsubscribe from enterasys, send email to lists...@unc.edu with the body: unsubscribe enterasys arch...@mail-archive.com
Re: [enterasys] summer time
Thanks, It was in fact the 2 digits. Best regards, Hugo Veiga Em 5/20/2011 4:23 PM, Sillsby, David escreveu: Hi Hugo, (hh:mm) wants 2 digits for each hour. Try this: set summertime recurring last sunday march 02:00 last sunday october 03:00 60 David Sillsby GTAC - Technical Support Engineer -Original Message- From: Hugo Veiga [mailto:hve...@ubi.pt] Sent: Friday, May 20, 2011 11:11 AM To: Enterasys Customer Mailing List Subject: [enterasys] summer time Hi all, What is wrong with this command, I tried on a Matrix E1 and it worked fine: G3(rw)-set summertime recurring last sunday march 2:00 last sunday october 3:00 60 Value of starting time (hh:mm) is incorrect. UBI amiga do ambiente: Antes de imprimir este e-mail pense bem se tem mesmo que o fazer. As árvores são um bem imprescindível. --- To unsubscribe from enterasys, send email to lists...@unc.edu with the body: unsubscribe enterasys dsill...@enterasys.com --- To unsubscribe from enterasys, send email to lists...@unc.edu with the body: unsubscribe enterasys hve...@ubi.pt . UBI amiga do ambiente: Antes de imprimir este e-mail pense bem se tem mesmo que o fazer. As árvores são um bem imprescindível. --- To unsubscribe from enterasys, send email to lists...@unc.edu with the body: unsubscribe enterasys arch...@mail-archive.com
Re: [enterasys] Configuration question
Hi, We have microsoft NLB to. I must say this was a little bit tricky. First we used unicast NLB and this flooded all ports on the same vlan. But then we configured igmpsnooping and set the servers to use multicast with IGMP. The flood stopped and the servers work fine as before. I advise you to try the same. Best regards, Hugo Veiga Em 5/2/2011 6:05 AM, Sheil,Sean M escreveu: We had an issue with the Microsoft NLB that was causing an arp flood. We had other issues that I cannot fully explain at this point. Our network has been very stable for many years. In essence, this NLB problem had been going on for quite some time, however with additional devices hitting OWA and our web server the problem finally hit a breaking point. The budget constraints are tied to purchasing the additional licenses for routing. Sean -Original Message- From: William Olive [mailto:william.ol...@hnehealth.nsw.gov.au] Sent: Sunday, May 01, 2011 4:17 AM To: Enterasys Customer Mailing List Subject: RE:[enterasys] Configuration question Sean What was the issue that caused you to re-think your routing strategy? And what budget constraint implies that you must use static routes as opposed to a dynamic routing policy? Billo Data Communications Co-Ordinator Information Technology Telecommunications Hunter New England Health Service ph 0249 213804 fax 0249 213038 william.ol...@hnehealth.nsw.gov.au From: Sheil,Sean M [s...@nwmissouri.edu] Sent: Saturday, 30 April 2011 2:58 PM To: Enterasys Customer Mailing List Subject: [enterasys] Configuration question Hi all, We have a 99% Enterasys network. At our core we are replacing our dfe blades with an S4. Three years ago, I move all of the routing from the edge devices (E1's) to the core. Everything had run fine until an issue occurred recently. Now the thought process has been to move the routing back out to the edge devices using static routes. I am looking for external advise on the pros and cons of making this change. We have 40+ subnets/vlans. The remote buildings will have a G3 at the entrance with 2 - 3 E1's stacked behind. At some point in time, we have had up to 13K devices connect to our network. Thanks, Sean --- Sean M. Sheil, GSEC-Gold Sr. Systems Administrator Northwest Missouri State University 660.541.3021 --- To unsubscribe from enterasys, send email to lists...@unc.edu with the body: unsubscribe enterasys william.ol...@hnehealth.nsw.gov.au --- To unsubscribe from enterasys, send email to lists...@unc.edu with the body: unsubscribe enterasys s...@nwmissouri.edu --- To unsubscribe from enterasys, send email to lists...@unc.edu with the body: unsubscribe enterasys hve...@ubi.pt . UBI amiga do ambiente: Antes de imprimir este e-mail pense bem se tem mesmo que o fazer. As árvores são um bem imprescindível. --- To unsubscribe from enterasys, send email to lists...@unc.edu with the body: unsubscribe enterasys arch...@mail-archive.com
[enterasys] Netsight topology maps
Hi, I'm changing the server where I have Netsight tools and splashed into a problem: How can I export the topology maps? If not where is the file(s) so I can copy them from one machine to the other? Best regards, Hugo Veiga UBI amiga do ambiente: Antes de imprimir este e-mail pense bem se tem mesmo que o fazer. As árvores são um bem imprescindível. --- To unsubscribe from enterasys, send email to lists...@unc.edu with the body: unsubscribe enterasys arch...@mail-archive.com
[enterasys] Strange routing behavior
Hi, On a C3 I got this: SASUBI_Sede(su)-set ip address 10.254.150.1 mask 255.255.0.0 gateway 10.254.254.254 SASUBI_Sede(su)-show ip route INET route table Destination Gateway FlagsUse If Metric 0.0.0.0/0 10.10.254.73 UG 1026 rt1 5 10.10.254.72/29 10.10.254.74 UC 347 rt1 5 10.10.254.74 10.10.254.74 UH 0 lo0 5 10.254.0.0/16 10.10.254.74 UC 4 host 5 10.254.150.1 10.10.254.74 UH 0 lo0 5 127.0.0.1 127.0.0.1 UH 0 lo0 5 192.168.150.0/24 10.10.254.74 UC 116 rt3 5 192.168.150.254 10.10.254.74 UH 0 lo0 5 192.168.151.0/24 10.10.254.74 UC 0 rt2 5 192.168.151.254 10.10.254.74 UH 0 lo0 5 I really cant understand the bold lines. If I said in the previous command that the routing interface for the host was 10.254.254.254 why isn't this doing so!!! Regards, Hugo Veiga UBI amiga do ambiente: Antes de imprimir este e-mail pense bem se tem mesmo que o fazer. As árvores são um bem imprescindível. --- To unsubscribe from enterasys, send email to lists...@unc.edu with the body: unsubscribe enterasys arch...@mail-archive.com
Re: [enterasys] Vlan configuration issue.
Set vlan egress ge.1.49 tagged The tagged option is the 801.Q trunk that you need. Regards, Hugo Veiga Hello, We have recently bought 10-12 Enterasys switches out of which 2-3 are SecureStack C3 and rest are SecureStack B3. We have planned to use B3 switches as L2 and C3 as L3. L2 switches will have vlan configured in it. The L3 switches will be used for Vlan routing. The links between L3 and L2 switches will be trunks. So how will I define a port as trunk port??? Need immediate help. Best Regards, Abhijit Pal SIEMENS Information systems Limited. GO/ GTAS(Global Technology Application Services) 13th Floor, Tower-2,Millenium City Bldg, DN-62,Sector-5,SaltLake, Kolkata-700091. DID: 91 33 2339 9396 Board:91 33 2339 9000 Fax: 91 33 2339 9001 Important notice: This e-mail and any attachment there to contains corporate proprietary information. If you have received it by mistake, please notify us immediately by reply e-mail and delete this e-mail and its attachments from your system. Thank You. --To unsubscribe from enterasys, send email to lists...@unc.edu with the body: unsubscribe enterasys hve...@ubi.pt UBI amiga do ambiente: Antes de imprimir este e-mail pense bem se tem mesmo que o fazer. As árvores são um bem imprescindível. --To unsubscribe from enterasys, send email to lists...@unc.edu with the body: unsubscribe enterasys arch...@mail-archive.com
Re: [enterasys] Vlan configuration issue.
Tell us exactly what you need. All the vlans, the ip address for all of them and also the uplink ports for the L3 and the L2. Also send witch vlans you need in the access ports of the L2. Me or someone else will send you a complete config. Regards, Hugo Veiga Hello, If I create vlan20 and vlan 30 on L3 switch then do I have to issue any other command on that switch for inter vlan routing? Best Regards, Abhijit Pal SIEMENS Information systems Limited. GO/ GTAS(Global Technology Application Services) 13th Floor, Tower-2,Millenium City Bldg, DN-62,Sector-5,SaltLake, Kolkata-700091. DID: 91 33 2339 9396 Board:91 33 2339 9000 Fax: 91 33 2339 9001 From: thomas.hofm...@elektrobit.com [mailto:thomas.hofm...@elektrobit.com] Sent: Wednesday, June 03, 2009 5:51 PM To: Enterasys Customer Mailing List Subject: RE: [enterasys] Vlan configuration issue. Hi, On the L2 you simply have to modify the egress list as stated below. If you create for example two VLANs on the L2, you just have to include the uplink port in the VLAN egress list. I will copy Christians example: # create first vlan with id 2 set vlan create 2 # create second vlan with id 3 set vlan create 3 # Now tell both VLANs to send their packets over the trunk port: # include the uplink port in the egress list of vlan id 2 set vlan egress 2 ge.1.1 tagged # include the uplink port in the egress list of vlan id 3 set vlan egress 3 ge.1.1 tagged That’s it! A 802.1q VLAN trunk port means only that you have multiple VLANs going over the same wire. In the default configuration, the L3 will accept all incoming VLAN tagged packets, coming over the trunk. Just don’t enable ingress filtering on the uplink port on the L3. Take care Tom From: Pal, Abhijit IN CCU SISL [mailto:abhijit@siemens.com] Sent: Wednesday, June 03, 2009 1:50 PM To: Enterasys Customer Mailing List Subject: RE: [enterasys] Vlan configuration issue. Hello, Appreciate your quick response. But still it’s not so clear. Cause Cisco concepts are not getting out of my mind. Oh God please help…J….. Suppose ge.1.1 is the L2 switch port which is connected to L3 switch. And I want all traffic from different vlan configured on that L2 switch will reach the L3 switch through the same ge.1.1 port and vlan routing will take place.. What should be the configuration in L2 and L3 switch Best Regards, Abhijit Pal SIEMENS Information systems Limited. GO/ GTAS(Global Technology Application Services) 13th Floor, Tower-2,Millenium City Bldg, DN-62,Sector-5,SaltLake, Kolkata-700091. DID: 91 33 2339 9396 Board:91 33 2339 9000 Fax: 91 33 2339 9001 From: Adell Querol, Christian [mailto:cadel...@tv3.cat] Sent: Wednesday, June 03, 2009 4:19 PM To: Enterasys Customer Mailing List Subject: RE: [enterasys] Vlan configuration issue. Hi, You don't need to define a port as trunk port, you only have to put the port in the egress table for thevlans you need. For example, set vlan create 2 set vlan create 3 set vlan egress 2 ge.1.1 set vlan egress 3 ge.1.1 With this configuration you are sending frames from vlans 2 and 3 through this port. You can check itusing show port egress ge.1.1 You can implement more options, but this is the basic configuration. Regards, Christian Adell Querol Servei Informàtic de Comunicacions de Producció c/ de la TV3 s/n · 08970 Sant Joan Despí (Baix Llobregat) Telèfon 93 552 80 88 www.tv3.cat De: Pal, Abhijit IN CCU SISL [mailto:abhijit@siemens.com] Enviat: miércoles, 03 de junio de 2009 12:43 Per a: Enterasys Customer Mailing List Tema: [enterasys] Vlan configuration issue. Hello, We have recently bought 10-12 Enterasys switches out of which 2-3 are SecureStack C3 and rest are SecureStack B3. We have planned to use B3 switches as L2 and C3 as L3. L2 switches will have vlan configured in it. The L3 switches will be used for Vlan routing. The links between L3 and L2 switches will be trunks. So how will I define a port as trunk port??? Need immediate help. Best Regards, Abhijit Pal SIEMENS Information systems Limited. GO/ GTAS(Global Technology Application Services) 13th Floor, Tower-2,Millenium City Bldg, DN-62,Sector-5,SaltLake, Kolkata-700091. DID: 91 33 2339 9396 Board:91 33 2339 9000 Fax: 91 33 2339 9001 Important notice: This e-mail and any attachment there to contains corporate proprietary information. If you have received it by mistake, please notify us immediately by reply e-mail and delete this e-mail and its attachments from your system. Thank You. --To unsubscribe from enterasys, send email to lists...@unc.edu with the body: unsubscribe enterasys cadel...@tv3.cat --To unsubscribe from enterasys, send email to lists...@unc.edu with the body: unsubscribe enterasys abhijit@siemens.com Important notice: This e-mail and any attachment there to contains corporate proprietary information. If you have received it by mistake, please notify us immediately by reply
Re: [enterasys] routing on G3
Hi, You can have has many secondary interfaces has you need. I defined the first host has the gateway for that network. Just do this: router enable config interface vlan 1 ip address 192.168.11.1 255.255.255.0 ip address 192.168.240.1 255.255.252.0 secondary ip address 192.168.12.1 255.255.255.0 secondary exit Hi, Thanks. I already did this and it looks like working, but what if I need to define one new subnet in LAN, for ex. 192.168.12.0/24? I should put it in VLAN 1, because it’s the same traffic as both others, but I can define there only two IP interfaces? In my situation I have eight subnets in LAN which traffic is not tagged (VLAN 1), does that means that I can route not tagged only two subnets? Kaspars From: Sylvain Conti [mailto:sco...@retis.fr] Sent: Thursday, April 09, 2009 9:05 PM To: Enterasys Customer Mailing List Subject: [enterasys] RE: [enterasys] routing on G3 Hi, As Jim said : router enable config interface vlan 1 ip address 192.168.11.0 255.255.255.0 ip address 192.168.240.0 255.255.252.0 secondary exit Interface vlan 10 ip address 192.168.15.0 255.255.255.0 exit exit Remark : Don't forbade to define the ip route default and any other needed for your network Cordialement, Sylvain CONTI - Rétis Communication Pilote Support Agence Ligne directe : 01.64.53.14.12 Portable : 06.78.78.07.47 http://www.retis.fr / blocked::mailto:sco...@retis.fr Agence Ile de France - Parc Gutenberg 11 voie La Cardon - 91120 Palaiseau Tél. : 01.64.53.14.14 - Fax : 01.69.32.14.02 De: Jim Huddle Date: jeu. 09/04/2009 13:14 À: Enterasys Customer Mailing List Objet : RE:[enterasys] routing on G3 If I correctly understand what you’ve said, can’t you 1.) Make 168.11 a primary and 168.240 a secondary on int vlan 1. Then just define 168.15 on int vlan 10. Since all three subnets will be on locally defined interfaces the G will know how to route between them. Jim From: Kaspars Bergs [mailto:kaspars.be...@kc.lv] Sent: Thursday, April 09, 2009 5:05 AM To: Enterasys Customer Mailing List Subject: [enterasys] routing on G3 Hello, Can anyone help with the routing on G3? Here is my situation: I have three subnets in LAN: 1) for data 192.168.11.0/24 and 192.168.240.0/22 with no tagged default vlan 1; 2) voice 192.168.15.0/24 tagged with vlan 10. I need to route them through G3. All of those subnets are coming in to G3 through uplinks or are directly connected to G3. I can't specify exact ports through which each subnet will reach G3, on uplink ports there are all subnets, on directly connected ports (ge) there can be voice or data. How to make routing between these subnets? The main problem is that I need “one armed” routing (routing between two subnets that reside on the same VLAN interface or physical port)) and there isn’t much in manuals about it. In my situation I need routing between three subnets (two not tagged VLAN 1 and one tagged VLAN 10) that resides on same physical port. Thanks in advance, Kaspars Bergs Riga, Latvia ? --To unsubscribe from enterasys, send email to lists...@unc.edu with the body: unsubscribe enterasys j...@osceola.org Please Note: Florida has a very broad Public Records Law. E-mails to this entity or its employees may be considered a public record. Your e-mail communication, including your email address may be disclosed to the public and media at any time. --To unsubscribe from enterasys, send email to lists...@unc.edu with the body: unsubscribe enterasys sco...@retis.fr --To unsubscribe from enterasys, send email to lists...@unc.edu with the body: unsubscribe enterasys kaspars.be...@kc.lv --To unsubscribe from enterasys, send email to lists...@unc.edu with the body: unsubscribe enterasys hve...@ubi.pt UBI amiga do ambiente: Antes de imprimir este e-mail pense bem se tem mesmo que o fazer. As árvores são um bem imprescindível. --To unsubscribe from enterasys, send email to lists...@unc.edu with the body: unsubscribe enterasys arch...@mail-archive.com