weird restarts when compiling
Hi to all the list, i 've been using FreeBSD for almost a month ,and i
have this weird problem. Sometimes when i try to compile a program the
computer will hard-reset itself, like someone pulled of the plug...
For example yesterday i was trying to install jdk1.6 + eclipse, and
while i was compiling eclipse {more precisely -if i remember
correctly- the diablo-jdk needed for eclipse} the computer rebooted
itself.
The load of the computer was: 2-3xterms, 1 Konversation irc client
,several opera9.51 windows, 1-2 konqueror windows, and 1-2 Firefox
widows. I have a dual core box with 2GB of memory and i use freebsd7
32bit. The computer was online for 8hours with almost the same load
{minus the compilation-procedure}.
* Has anyone had problems like this?
* What can i do to investigate a bit more what was the situation
before the restart?
* Is there anyway to solve this problem.
thanks for your help,
nikos
PS: i could blame the power company but the above problem has happened
before{several times} when i tried to compile big programs like
firefox or do a pkgdb -Fu, so i don't think it is this.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: weird restarts when compiling
Aggelidis Nikos wrote:
Hi to all the list, i 've been using FreeBSD for almost a month ,and i
have this weird problem. Sometimes when i try to compile a program the
computer will hard-reset itself, like someone pulled of the plug...
For example yesterday i was trying to install jdk1.6 + eclipse, and
while i was compiling eclipse {more precisely -if i remember
correctly- the diablo-jdk needed for eclipse} the computer rebooted
itself.
The load of the computer was: 2-3xterms, 1 Konversation irc client
,several opera9.51 windows, 1-2 konqueror windows, and 1-2 Firefox
widows. I have a dual core box with 2GB of memory and i use freebsd7
32bit. The computer was online for 8hours with almost the same load
{minus the compilation-procedure}.
* Has anyone had problems like this?
* What can i do to investigate a bit more what was the situation
before the restart?
* Is there anyway to solve this problem.
thanks for your help,
nikos
PS: i could blame the power company but the above problem has happened
before{several times} when i tried to compile big programs like
firefox or do a pkgdb -Fu, so i don't think it is this.
Hi Nikos,
This sounds like a hardware problem to me. It is not easy to find out
the exact cause, except perhaps by swapping components:
- Could be bad RAM, but I doubt it is you would probably get at least a
kernel panic and not a hard reboot
- Could be that your power supply can not handle the increased current
required by the CPU / disk when compiling, voltages fall out of spec,
and the motherboard resets itself. I've seen this happening quite a few
times - systems exhibit a variety of weird symptoms like this, commonly
failing when running CPU intensive apps.
- Your CPU / system may get overheated and hits a thermal cutoff.
- You could have some other faulty component, or some of your BIOS
settings are too 'high'
Things to try:
- Take the cover off and see whether there is heat build up when
compiling and also whether the fans work adequately.
- Swap out the power supply
- Change some BIOS settings, or maybe underclock the CPU a bit so it
requires less power and see if it works then.
Most of the people here are used to run long compilation / portupgrade
cycles (sometimes in excess of 24 hours) and when a system fails
unexpectedly like this it is normal to suspect hardware problems.
Manolis
P.S. I removed the -hackers list from the reply - this question is
better suited for -questions only.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: PACKAGESITE
At 2008-07-12T21:59:09-07:00, [EMAIL PROTECTED] wrote: Can someone provide a correct example of setting PACKAGESITE so that pkg_add will find the 7-stable packages for i386? I have tried ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/packages-7-stable/Latest/ You could use the `-r' option of pkg_add(1) to enable remote fetching. % setenv PACKAGESITE 'ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/packages-7-stable/Latest/' % pkg_add -rv expat scheme: [ftp] user: [] password: [] host: [ftp.freebsd.org] port: [0] document: [/pub/FreeBSD/ports/i386/packages-7-stable/Latest/expat.tbz] --- ftp.freebsd.org:21 looking up ftp.freebsd.org connecting to ftp.freebsd.org:21 220 Welcome to freebsd.isc.org. USER anonymous 331 Please specify the password. PASS [EMAIL PROTECTED] 230 Login successful. PWD 257 / CWD pub/FreeBSD/ports/i386/packages-7-stable/Latest 250 Directory successfully changed. MODE S 200 Mode set to S. TYPE I 200 Switching to Binary mode. setting passive mode PASV 227 Entering Passive Mode (204,152,184,73,88,54) opening data connection initiating transfer RETR expat.tbz 150 Opening BINARY mode data connection for expat.tbz (148302 bytes). Fetching ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/packages-7-stable/Latest/expat.tbz... Raghavendra. -- N. Raghavendra [EMAIL PROTECTED] | http://www.retrotexts.net/ Harish-Chandra Research Institute | http://www.mri.ernet.in/ See message headers for contact and OpenPGP information. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: PACKAGESITE
[EMAIL PROTECTED] [EMAIL PROTECTED] wrote: Can someone provide a correct example of setting PACKAGESITE so that pkg_add will find the 7-stable packages for i386? I have tried ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/packages-7-stable/Latest/ as shown in the handbook, and also: ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/packages-7-stable/All/ ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/packages-7-stable/ ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/packages-7-stable and all have failed. I get messages like pkg_add: could not find package expat-2.0.1 ! pkg_add: could not find package png-1.2.28 ! pkg_add: could not find package pkg-config-0.23_1 ! etc. Even specifying -v does not cause pkg_add to show exactly [...] Did you specify the -r flag? Without that, the PACKAGESITE environment variable is note used. From the ENVIRONMENT section of pkg_add(1): The environment variable PACKAGESITE specifies an alternate location for pkg_add to fetch from. This variable subverts the automatic directory logic that pkg_add uses when the -r option is invoked. Thus it should be a complete URL to the remote package file(s). -- Sahil Tandon [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: weird restarts when compiling
On Sun, 13 Jul 2008 09:09:09 +0300
Aggelidis Nikos [EMAIL PROTECTED] wrote:
Hi to all the list, i 've been using FreeBSD for almost a month ,and i
have this weird problem. Sometimes when i try to compile a program the
computer will hard-reset itself, like someone pulled of the plug...
For example yesterday i was trying to install jdk1.6 + eclipse, and
while i was compiling eclipse {more precisely -if i remember
correctly- the diablo-jdk needed for eclipse} the computer rebooted
itself.
The load of the computer was: 2-3xterms, 1 Konversation irc client
,several opera9.51 windows, 1-2 konqueror windows, and 1-2 Firefox
widows. I have a dual core box with 2GB of memory and i use freebsd7
32bit. The computer was online for 8hours with almost the same load
{minus the compilation-procedure}.
* Has anyone had problems like this?
Yes. It's always turned out to be flaky hardware for me.
* What can i do to investigate a bit more what was the situation
before the restart?
Look through /var/log/messages.
* Is there anyway to solve this problem.
Well, you really can't solve it, so much as troubleshoot it. Make up
a list of possible causes, and then start checking each possible
cause. You haven't given any real information about the system or the
problem, so we can't eliminate anything. My top suspects would be the
PSU (old or inadequate) and CPU (overheating or overclocked). Memory
and the I/O subsystem would be next, but they tend to cause
random process failure rather than system shutdowns when they go
flaky, so I'd try them last.
mike
--
Mike Meyer [EMAIL PROTECTED] http://www.mired.org/consulting.html
Independent Network/Unix/Perforce consultant, email for more information.
O ascii ribbon campaign - stop html mail - www.asciiribbon.org
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: weird restarts when compiling
Thanks for your answers Manolis and Mike. In the beginning i didn't suspect hardware because it happened only at compilation procedures. Now i realize that every other task i do isn't really demanding. Look through /var/log/messages. i get this: Jul 13 09:00:00 apollo newsyslog[1018]: logfile turned over due to size100K * CPU overheating - Is there anyway to check for cpu temperatures within freebsd? - I 've used the pc for like 8 hours in a really hot day but it didn't restart...if this can be considered as an indication. *Memory - i used memtest ,from an ubuntu live cd, to check the memory and everything works fine according to it. *PSU I have a 400Watt PSU... maybe this is inadequate. I will try to swap it for something stronger to see how it goes. In general where are there any stress tests i can do, to test the PSU and some major subsystems of the computer? thanks in advance, nikos PS: this was a ready-made pc that had it's p4 processor upgraded to a dual core. It also got a new motherboard and 2G of ddr2. It has an old nvidia GeForce fx 5200, and a 400watt nameless PSU. I only have freebsd,which i installed a month ago, on it. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
IPv6 Host Names
I am using the getnameinfo function to convert an IPv6 IP address to its name. This works properly if the host info is in DNS. However, if its in the /etc/hosts file and not DNS then all getnameinfo returns is the IP address. If i call it with an IPv4 IP address then it looks up the host name in /etc/hosts. I have tried various host entries: fe80::216:cbff:febd:a4e5mbook6 fe80::216:cbff:febd:a4e5%rl0mbook6 fe80::216:cbff:febd:a4e5%rl0mbook6.local Is there a way to get getname info to obtain host names from the /etc/ hosts file. The nsswitch.conf file has files dns ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: weird restarts when compiling
Aggelidis Nikos wrote: PS: this was a ready-made pc that had it's p4 processor upgraded to a dual core. It also got a new motherboard and 2G of ddr2. It has an old nvidia GeForce fx 5200, and a 400watt nameless PSU. I only have freebsd,which i installed a month ago, on it. ___ The nameless PSU is probably the cause then. It would work ok with the older CPU but can not keep up with 2cores... I would focus on that, since you already tested memory and the rest of the components seem standard. In ports you will find a few programs for stress testing, e.g.: math/mprime (in torture mode) sysutils/cpuburn (specifically for CPU stress testing) ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: PACKAGESITE
At 2008-07-12T21:59:09-07:00, [EMAIL PROTECTED] wrote: Can someone provide a correct example of setting PACKAGESITE so that pkg_add will find the 7-stable packages for i386? I have tried ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/packages-7-stable/Latest/ If you are running 7-STABLE, setting `PACKAGESITE' to the above value is unnecessary [Handbook, 4.4.1, Note]: pkg_add(1) will download the latest version of your application if you are using FreeBSD-CURRENT or FreeBSD-STABLE. In that case, just the `-r' option to pkg_add(1) will do. % uname -r 7.0-STABLE % unsetenv PACKAGESITE % echo $PACKAGESITE PACKAGESITE: Undefined variable. % pkg_add -rv expat scheme: [ftp] user: [] password: [] host: [ftp.freebsd.org] port: [0] document: [/pub/FreeBSD/ports/i386/packages-7-stable/Latest/expat.tbz] --- ftp.freebsd.org:21 looking up ftp.freebsd.org connecting to ftp.freebsd.org:21 220 Welcome to freebsd.isc.org. USER anonymous 331 Please specify the password. PASS [EMAIL PROTECTED] 230 Login successful. PWD 257 / CWD pub/FreeBSD/ports/i386/packages-7-stable/Latest 250 Directory successfully changed. MODE S 200 Mode set to S. TYPE I 200 Switching to Binary mode. setting passive mode PASV 227 Entering Passive Mode (204,152,184,73,68,212) opening data connection initiating transfer RETR expat.tbz 150 Opening BINARY mode data connection for expat.tbz (148302 bytes). Fetching ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/packages-7-stable/Latest/expat.tbz... Raghavendra. -- N. Raghavendra [EMAIL PROTECTED] | http://www.retrotexts.net/ Harish-Chandra Research Institute | http://www.mri.ernet.in/ See message headers for contact and OpenPGP information. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Firefox/epiphany/galeon all crash
Kurt Buff wrote: On Tue, Jul 8, 2008 at 4:58 PM, Kurt Buff [EMAIL PROTECTED] wrote: As soon as I log into my gmail account, and several other sites. Running 7-STABLE, amd64 - FF is 2.0.0.14, gecko is 20080628. I'm writing this on my really old Windows laptop Below are the last few lines from a representative set of output from session launched from the commandline. Is it flash, or something else, and is there anything I can do to fix this? Oddly enough, it's not crashing on the OWA (Outlook Web Access) from my company's Exchange server - but that's just a lot of javascript, AFAICT. CSS Error (https://mail.google.com/mail/?ui=2view=bspver=1qygpcgurkovy :0.16): Error in parsing value for property 'width'. Declaration dropped. ###!!! ASSERTION: bad width: 'metrics.width=0', file nsLineLayout.cpp, line 1068 Break: at file nsLineLayout.cpp, line 1068 ++DOMWINDOW == 17 WARNING: Moving XPConnect wrappedNative to new scope, but can't fixup __proto__, file xpcwrappednative.cpp, line 1108 For application/x-shockwave-flash found plugin /usr/local/lib/browser_plugins/libnpflash.so LoadPlugin() /usr/local/lib/browser_plugins/libnpflash.so returned 29e4d60 NP_Initialize New nsPluginNativeWindowGtk2: NPPVpluginNeedsXEmbed=0 nsPluginNativeWindowGtk2: call SetWindow with xid=0x2001584 About to create new ws_info... About to create new xtbin of 100 X 100 from 0x192ccc0... About to show xtbin(0x7b2e90)... completed gtk_widget_show(0x7b2e90) SetWindow nsPluginNativeWindowGtk2: NPPVpluginNeedsXEmbed=0 nsPluginNativeWindowGtk2: call SetWindow with xid=0x2001584 SetWindow nsPluginNativeWindowGtk2: NPPVpluginNeedsXEmbed=0 nsPluginNativeWindowGtk2: call SetWindow with xid=0x2001584 SetWindow NewStream WriteReady Write decoding... The program 'gecko' received an X Window System error. This probably reflects a bug in the program. The error was 'BadImplementation (server does not implement operation)'. (Details: serial 36 error_code 17 request_code 146 minor_code 5) (Note to programmers: normally, X errors are reported asynchronously; that is, you will receive the error a while after causing it. To debug your program, run it with the --sync command line option to change this behavior. You can then get a meaningful backtrace from your debugger if you break on the gdk_x_error() function.) nsStringStats = mAllocCount: 47580 = mReallocCount: 7348 = mFreeCount: 40084 -- LEAKED 7496 !!! = mShareCount: 29791 = mAdoptCount: 4257 = mAdoptFreeCount: 4072 -- LEAKED 185 !!! Haven't heard from anyone on this, so I thought I'd update it. This happens in both gnome and xfce4. What further troubleshooting should I do, or to whom should I report this, to advance the issue? Kurt Install the flashblock plugin and be selective about where you allow flash. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: weird restarts when compiling
-On [20080713 10:04], Aggelidis Nikos ([EMAIL PROTECTED]) wrote: Look through /var/log/messages. i get this: Jul 13 09:00:00 apollo newsyslog[1018]: logfile turned over due to size100K Then look at /var/log/messages.0.bz2 Also, check `last`. -- Jeroen Ruigrok van der Werven asmodai(-at-)in-nomine.org / asmodai イェルーン ラウフロック ヴァン デル ウェルヴェン http://www.in-nomine.org/ | http://www.rangaku.org/ | GPG: 2EAC625B There is time in life for everything... ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: PACKAGESITE
Did you specify the -r flag? Without that, the PACKAGESITE environment variable is note used ... No, I didn't, because -- unless I am misunderstanding the description of the -r flag -- that will cause pkg_add to look *only* on the FTP site. I want it to use packages that have already been downloaded, and use the FTP site only when a needed package is not available locally. I'm trying to install an already-downloaded 10MB package which has quite a few dependencies, several of which were already fetched during a previous attempt. IOW I want the equivalent of specifying the current directory, followed by the FTP site, in PKG_PATH; but the colon in the URL messes that up by looking like a pathname separator. If I tried something like setenv PKG_PATH .:ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/packages-7-stable/All/ it would look first in the current directory, then in a subdirectory named ftp, and finally in a directory named //ftp.freebsd.org/... ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: PACKAGESITE
[EMAIL PROTECTED] wrote: Did you specify the -r flag? Without that, the PACKAGESITE environment variable is note used ... No, I didn't, because -- unless I am misunderstanding the description of the -r flag -- that will cause pkg_add to look *only* on the FTP site. I want it to use packages that have already been downloaded, and use the FTP site only when a needed package is not available locally. I'm trying to install an already-downloaded 10MB package which has quite a few dependencies, several of which were already fetched during a previous attempt. IOW I want the equivalent of specifying the current directory, followed by the FTP site, in PKG_PATH; but the colon in the URL messes that up by looking like a pathname separator. If I tried something like setenv PKG_PATH .:ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/packages-7-stable/All/ it would look first in the current directory, then in a subdirectory named ftp, and finally in a directory named //ftp.freebsd.org/... ___ PKG_PATH is for directories only, it will not do FTP. from man pkg_add: The value of the PKG_PATH is used if a given package cannot be found. The environment variable should be a series of entries separated by colons. Each entry consists of a directory name. If I understand well, what you are asking is for pkg_add to: - Search all local paths (in PKG_PATH) for a dependency - If not found, use PACKAGESITE to download from a site. As far as I know, pkg_add will only fetch dependencies recursively from the Internet when used with -r but it will then ignore PKG_PATH. Seems what you are asking cannot be done this way, but I might be wrong. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: PACKAGESITE
On Sunday 13 July 2008, Manolis Kiagias wrote: As far as I know, pkg_add will only fetch dependencies recursively from the Internet when used with -r but it will then ignore PKG_PATH. Seems what you are asking cannot be done this way, but I might be wrong. I wonder if portinstall -P (or even -PP) might do what the OP wants? -- Mike Clarke ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: PACKAGESITE
At 2008-07-13T01:33:18-07:00, [EMAIL PROTECTED] wrote: IOW I want the equivalent of specifying the current directory, followed by the FTP site, in PKG_PATH; AFAIK, in FreeBSD, the entries in PKG_PATH must be directories, not URLs. (NetBSD and OpenBSD seem to allow URLs in that variable: http://netbsd.gw.com/cgi-bin/man-cgi?pkg_add http://www.openbsd.org/cgi-bin/man.cgi?query=pkg_add ) Raghavendra. -- N. Raghavendra [EMAIL PROTECTED] | http://www.retrotexts.net/ Harish-Chandra Research Institute | http://www.mri.ernet.in/ See message headers for contact and OpenPGP information. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: PACKAGESITE
Mike Clarke wrote: On Sunday 13 July 2008, Manolis Kiagias wrote: As far as I know, pkg_add will only fetch dependencies recursively from the Internet when used with -r but it will then ignore PKG_PATH. Seems what you are asking cannot be done this way, but I might be wrong. I wonder if portinstall -P (or even -PP) might do what the OP wants? I am using portupgrade for upgrading from source myself, but have never used portinstall with packages. You are correct, according to the man page, portinstall -PP would be his best bet. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: weird restarts when compiling
Since i can't buy a new PSU today... I kept testing: i tried compile and i got a reboot again: this time i checked /var/log/messages and i have this: ... Jul 13 13:41:20 apollo syslogd: kernel boot file is /boot/kernel/kernel Jul 13 13:41:20 apollo kernel: panic: vm_fault: fault on nofault entry, addr: c3a16000 Jul 13 13:41:20 apollo kernel: cpuid = 0 Jul 13 13:41:20 apollo kernel: Uptime: 4h50m11s Jul 13 13:41:20 apollo kernel: Physical memory: 2035 MB Jul 13 13:41:20 apollo kernel: Dumping 218 MB: 203 187 171 155 139 123 107 91 75 59 43 27 11Copyrigh t (c) 1992-2008 The FreeBSD Project. ... i also installed xmbmon to measure temperatures... i haven't seen anything above 60C so i guess it isn't the BIOS rebooting the computer due to cpu temperature.. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
FreeBSD 7.X/8.0: Firewall performance with pf, ipfw or ipf? Any benchmarks available?
Hello, since FreeBSD 5.0 I was using 'pf' as the packet filter on FreeBSD due to some performance advantages over ipfw in the time when FreeBSD was introduced. Now I'm al littel bit detached from development and status quo. I read about problems in FreeBSD 7 when using 'pf' in a bridged environment, CPU load increaeses and packet drops are the result (on an IBM Server with Intel em0/1 NICs). Well, I'm pleased that FreeBSD comes with at least three packet filters (ipfw, ipf, pf), but at the end, the choice is up to me and in question of the better support and performance this leaves me alone in the dark. So, does any of the network experts do have benchmarked any of the packet filters? what is the preferred selection if someone would like to have a 'simple' packetfilter (no usage of special features of one of the mentioned packetfilters except of bridging and LAGG)? Talking about FreeBSD 8's virtualiziation capabilities on network stack: will this have implications on what filter will work or not (if ever, I do not know how abstract this virtualization is indeed from the packet filtering layer). So, sorry for the little confuses, Oliver ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: weird restarts when compiling
On Sun, Jul 13, 2008 at 11:04:31AM +0300, Aggelidis Nikos wrote: * CPU overheating - Is there anyway to check for cpu temperatures within freebsd? - I 've used the pc for like 8 hours in a really hot day but it didn't restart...if this can be considered as an indication. Not easily. If coretemp(4) is loaded, you should have some sysctls named dev.cpu.X.temperature which contain the temperature of the core in Celcius. Otherwise, you can try utilities like mbmon and healthd, but those were written for old (circa 90s) hardware. Also, are you running powerd(8) on this machine? *Memory - i used memtest ,from an ubuntu live cd, to check the memory and everything works fine according to it. That's a good start; your memory is probably not the issue then. *PSU I have a 400Watt PSU... maybe this is inadequate. I will try to swap it for something stronger to see how it goes. Wattage is not the only thing that matters with a PSU. Voltages are significantly more important, if you ask me. I'd make a list of what your voltages are (go into the BIOS and see) and provide them here. There may be one which is significantly off, indicating a bad PSU. In general where are there any stress tests i can do, to test the PSU and some major subsystems of the computer? Windows offers many free utilities that do this; I'm not sure about FreeBSD. -- | Jeremy Chadwickjdc at parodius.com | | Parodius Networking http://www.parodius.com/ | | UNIX Systems Administrator Mountain View, CA, USA | | Making life hard for others since 1977. PGP: 4BD6C0CB | ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: weird restarts when compiling
Aggelidis Nikos wrote: * CPU overheating - Is there anyway to check for cpu temperatures within freebsd? - I 've used the pc for like 8 hours in a really hot day but it didn't restart...if this can be considered as an indication. You could try sysutils/mbmon or sysutils/xmbmon - shows cpu temperature, inside case temperature and vcore voltage. Supported chipsets are listed in mbmon/pkg-descr. Chris ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: weird restarts when compiling
running mprime-torture i get: Beginning a continuous self-test to check your computer. Please read stress.txt. Hit ^C to end this test. Test 1, 4000 Lucas-Lehmer iterations of M19922945 using 1024K FFT length. Test 2, 4000 Lucas-Lehmer iterations of M19922943 using 1024K FFT length. Test 3, 4000 Lucas-Lehmer iterations of M19374367 using 1024K FFT length. Test 4, 4000 Lucas-Lehmer iterations of M19174369 using 1024K FFT length. FATAL ERROR: Rounding was 0.5, expected less than 0.4 Hardware failure detected, consult stress.txt file. Torture Test ran 9 minutes - 1 errors, 0 warnings. so maybe it isn't even a psu problem but a cpu one? I'd make a list of what your voltages are (go into the BIOS and see) and provide them here. i will do that. thanks everyone for your assistance so far! -nikos ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: weird restarts when compiling
Aggelidis Nikos wrote: running mprime-torture i get: Beginning a continuous self-test to check your computer. Please read stress.txt. Hit ^C to end this test. Test 1, 4000 Lucas-Lehmer iterations of M19922945 using 1024K FFT length. Test 2, 4000 Lucas-Lehmer iterations of M19922943 using 1024K FFT length. Test 3, 4000 Lucas-Lehmer iterations of M19374367 using 1024K FFT length. Test 4, 4000 Lucas-Lehmer iterations of M19174369 using 1024K FFT length. FATAL ERROR: Rounding was 0.5, expected less than 0.4 Hardware failure detected, consult stress.txt file. Torture Test ran 9 minutes - 1 errors, 0 warnings. so maybe it isn't even a psu problem but a cpu one? Not really. All modern CPUs have BIST (built-in self tests) that run even before the BIOS starts, and it would be really rare to actually have a working system with a faulty CPU. Errors in mprime usually indicate some other problem, such as bad memory, bad BIOS settings, overheating or an incompatibility of CPU/motherboard etc. Going back to what you said previously, you got an Nvidia 5200 graphics card? Were these ever produced for PCI express or are you using a) a normal PCI one or b)You got one of these weird mobos that have both AGP and PCI express? As I understand there are no AGP-only motherboards for core2duo. Another thought: Sometimes the CPU cooler is not entirely seated, resulting in bad thermal contact of the heatsink/CPU assembly. This is not unusual in the 775 socket since the mechanism requires quite some pressure to lock and some people are afraid to apply it ;) ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: weird restarts when compiling
Not really. All modern CPUs have BIST (built-in self tests) that run even before the BIOS starts, and it would be really rare to actually have a working system with a faulty CPU. Errors in mprime usually indicate some other problem, such as bad memory, bad BIOS settings, overheating or an incompatibility of CPU/motherboard etc. Going back to what you said previously, you got an Nvidia 5200 graphics card? Were these ever produced for PCI express or are you using a) a normal PCI one or b)You got one of these weird mobos that have both AGP and PCI express? As I understand there are no AGP-only motherboards for core2duo. Yes i have a weird mobo that has both AGP and PCI. The nvidia is an AGP one. The mobo wasn't my choise :( but when the changed the false cpu with a dual core they didn't want to change the graphics card as well. Can this mobo create problems? Another thought: Sometimes the CPU cooler is not entirely seated, resulting in bad thermal contact of the heatsink/CPU assembly. This is not unusual in the 775 socket since the mechanism requires quite some pressure to lock and some people are afraid to apply it ;) I will check it... ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Windows Firefox in Wine: Ugly Fonts
Leslie Jensen a écrit : Hello, I installed Windows Firefox 2.0.0.12 in Wine 0.9.58 on a 7.0-RELEASE running KDE 3.5.8 as a solution to the Flash problem, which works just fine this way (this is 9.0 r124). However Firefox fonts look quite bad; jaggies, discontinuities and boxes in place of some characters. I installed the port x11-fonts/webfonts, but the problem persisted. Suggestions? I don't know if this is relevant, but I have Geko installed in Wine and I run a low resolution monitor, 800x600. Thanks! I took the fonts folder from a Win XP system and copied it to my .wine/windows directory. /Leslie Tried it, to no avail. :-/ //rk ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: rtorrent failure when running on FBSD-7.0 amd64
rtorrent.rc, or .rtorrent.rc ? this is not the same, and this is not a typo either. On Sat, Jul 12, 2008 at 5:06 PM, luizbcampos [EMAIL PROTECTED] wrote: After I had installled rtorrent on my system I get failure when I run it. The display shows - unable to read rtorrent.rc file. I have chmoded 0755 this file but the failure stays on ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Windows Firefox in Wine: Ugly Fonts
On Sat, Jul 12, 2008 at 11:58 PM, Razmig K [EMAIL PROTECTED] wrote: characters. I installed the port x11-fonts/webfonts, but the problem persisted. Suggestions? The x11/webfonts package will only help if you are running the native application. You have two options to resolve this issue: Copy the fonts folder over from a WinXP/Vista install to the relevant wine bottle.or Install the winetricks tool and let it install all the Windows fonts for you. Hope this helps. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Windows Firefox in Wine: Ugly Fonts
Razmig K (Sun 07/13/08 00:58): Hello, I installed Windows Firefox 2.0.0.12 in Wine 0.9.58 on a 7.0-RELEASE running KDE 3.5.8 as a solution to the Flash problem, which works just fine this way (this is 9.0 r124). However Firefox fonts look quite bad; jaggies, discontinuities and boxes in place of some characters. I installed the port x11-fonts/webfonts, but the problem persisted. Suggestions? I don't know if this is relevant, but I have Geko installed in Wine and I run a low resolution monitor, 800x600. Thanks! Have you tried installing the additional fonts through winetricks? http://wiki.winehq.org/winetricks Zach ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: weird restarts when compiling
Aggelidis Nikos wrote: Not really. All modern CPUs have BIST (built-in self tests) that run even before the BIOS starts, and it would be really rare to actually have a working system with a faulty CPU. Errors in mprime usually indicate some other problem, such as bad memory, bad BIOS settings, overheating or an incompatibility of CPU/motherboard etc. Going back to what you said previously, you got an Nvidia 5200 graphics card? Were these ever produced for PCI express or are you using a) a normal PCI one or b)You got one of these weird mobos that have both AGP and PCI express? As I understand there are no AGP-only motherboards for core2duo. Yes i have a weird mobo that has both AGP and PCI. The nvidia is an AGP one. The mobo wasn't my choise :( but when the changed the false cpu with a dual core they didn't want to change the graphics card as well. Can this mobo create problems? It is possible, having both an AGP and PCI express on the same board is a hack, and not even all AGP cards are compatible with these mobos. It would be better to test it with a PCI express graphics card, if you can grab one. I'd be happy to lend you one for testing, but I guess we are not in the same town ;) (Chania here...) ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: weird restarts when compiling
On Jul 13, 2008, at 4:38 AM, Aggelidis Nikos wrote: FATAL ERROR: Rounding was 0.5, expected less than 0.4 Hardware failure detected, consult stress.txt file. Torture Test ran 9 minutes - 1 errors, 0 warnings. so maybe it isn't even a psu problem but a cpu one? If it was strictly a problem with the CPU, you'd likely not be able to boot, or this test would fail within a few seconds. 9 minutes is possible but a bit on the early side to be a thermal issue; more likely would be the memory config and BIOS setup is marginal and that relaxing the timings would help. If you shut down for a while, and then do a cold restart with the case open, does that result in the stress test taking longer to fail? If so, check your cooling. On the other hand, if the length of time before failure doesn't change, or more precisely seems random-- 5-10 minutes one try, an hour the next, that generally indicates memory and motherboard BIOS setup. PSU problems tend to not show up with prime95, but when you have the disks busy and maybe graphics, also. -- -Chuck ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Windows Firefox in Wine: Ugly Fonts
Ross Cameron a écrit : You have two options to resolve this issue: Copy the fonts folder over from a WinXP/Vista install to the relevant wine bottle.or Install the winetricks tool and let it install all the Windows fonts for you. Hope this helps. Unfortunately neither works; I copied the fonts directory in a Windows XP installation to .wine/drive_c/windows/ to no avail, removed it and used winetricks to install allfonts (corefonts, tahoma, liberation) with similar results. Further suggestions? //rk ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: saslauthd on AMD64
Hello Duane Do you have some inputs (config files etc.)? Regards, Am Sun, Jun 15, 2008 at 11:42:57PM + Duane Hill schrieb: I have an AMD64 install using saslauthd and is failing. An identical installation on i386 works fine. Both installations are running on FreeBSD 7.0-RELEASE with cyrus-sasl-2.1.22_1, and cyrus-sasl-saslauthd-2.1.22. A telnet session to the MTA yields the result: 535 5.7.8 Error: authentication failed: generic failure One of the saslauthd threads then exits: Jun 15 23:09:55 smtpgate kernel: pid 44573 (saslauthd), uid 0: exited on signal 11 (core dumped) I did not have this issue running on the AMD64 6.2-RELEASE. Any help would be appreciated. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] -- Martin Schweizer [EMAIL PROTECTED] PC-Service M. Schweizer GmbH; Bannholzstrasse 6; CH-8608 Bubikon Tel. +41 55 243 30 00; Fax: +41 55 243 33 22; http://www.pc-service.ch; public key : http://www.pc-service.ch/pgp/public_key.asc; fingerprint: EC21 CA4D 5C78 BC2D 73B7 10F9 C1AE 1691 D30F D239; ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Can't run WindowMaker. Fatal server error:
Well I think so. As I did: make buildkernel KERNCONF=THINKPAD600KERNEL and make installkernel KERNCONF=THINKPAD600KERNEL Here are my current installed Xorg versions: xorg-7.3_2 X.Org complete distribution metaport xorg-apps-7.3 X.org apps meta-port xorg-cf-files-1.0.2_2 X.org cf files for use with imake builds xorg-docs-1.4,1 X.org documentation files xorg-drivers-7.3_3 X.org drivers meta-port xorg-fonts-100dpi-7.3 X.Org 100dpi bitmap fonts xorg-fonts-7.3_1X.org fonts meta-port xorg-fonts-75dpi-7.3 X.Org 75dpi bitmap fonts xorg-fonts-cyrillic-7.3 X.Org Cyrillic bitmap fonts xorg-fonts-miscbitmaps-7.3 X.Org miscellaneous bitmap fonts xorg-fonts-truetype-7.3 X.Org TrueType fonts xorg-fonts-type1-7.3 X.Org Type1 fonts xorg-libraries-7.3_2 X.org libraries meta-port xorg-protos-7.3_2 X.org protos meta-port xorg-server-1.4.2,1 X.Org X server and related programs And My Xorg.0.log X.Org X Server 1.4.2 Release Date: 11 June 2008 X Protocol Version 11, Revision 0 Build Operating System: FreeBSD 7.0-RELEASE i386 Current Operating System: FreeBSD Thinkpad600.uclouvain.be 7.0-RELEASE FreeBSD 7.0-RELEASE #2: Mon Jul 7 18:58:32 CEST 2008 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/THINKPAD600KERNEL i386 Build Date: 11 July 2008 04:18:18PM Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/Xorg.0.log, Time: Sat Jul 12 18:40:12 2008 (==) Using config file: /etc/X11/xorg.conf (==) ServerLayout Simple Layout (**) |--Screen Screen 1 (0) (**) | |--Monitor My Monitor (**) | |--Device ** NeoMagic (generic) [neomagic] (**) |--Input Device Mouse1 (**) |--Input Device Keyboard1 (==) Automatically adding devices (==) Automatically enabling devices (==) Including the default font path /usr/local/lib/X11/fonts/misc/,/usr/local/lib/X11/fonts/TTF/,/usr/local/lib/X11/fonts/OTF,/usr/local/lib/X11/fonts/Type1/,/usr/local/lib/X11/fonts/100dpi/,/usr/local/lib/X11/fonts/75dpi/. (**) FontPath set to: /usr/local/lib/X11/fonts/misc/, /usr/local/lib/X11/fonts/TTF/, /usr/local/lib/X11/fonts/OTF, /usr/local/lib/X11/fonts/Type1/, /usr/local/lib/X11/fonts/100dpi/, /usr/local/lib/X11/fonts/75dpi/, /usr/local/lib/X11/fonts/local/, /usr/local/lib/X11/fonts/misc/, /usr/local/lib/X11/fonts/TTF/, /usr/local/lib/X11/fonts/OTF, /usr/local/lib/X11/fonts/Type1/, /usr/local/lib/X11/fonts/100dpi/, /usr/local/lib/X11/fonts/75dpi/ (==) RgbPath set to /usr/local/share/X11/rgb (==) ModulePath set to /usr/local/lib/xorg/modules (II) Loader magic: 0x81d0d80 (II) Module ABI versions: X.Org ANSI C Emulation: 0.3 X.Org Video Driver: 2.0 X.Org XInput driver : 2.0 X.Org Server Extension : 0.3 X.Org Font Renderer : 0.5 (II) Loader running on freebsd (II) LoadModule: pcidata (II) Loading /usr/local/lib/xorg/modules//libpcidata.so (II) Module pcidata: vendor=X.Org Foundation compiled for 1.4.2, module version = 1.0.0 ABI class: X.Org Video Driver, version 2.0 (--) Using syscons driver with X support (version 2.0) (--) using VT number 9 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x80003908, mode1Res1 = 0x8000 (WW) OS did not count PCI devices, guessing wildly (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,7192 card , rev 02 class 06,00,00 hdr 00 (II) PCI: 00:02:0: chip 104c,ac16 card 1000, rev 02 class 06,07,00 hdr 82 (II) PCI: 00:02:1: chip 104c,ac16 card fffc, rev 02 class 06,07,00 hdr 82 (II) PCI: 00:03:0: chip 10c8,0004 card 10c8,0004 rev 01 class 03,00,00 hdr 00 (II) PCI: 00:07:0: chip 8086,7110 card , rev 01 class 06,80,00 hdr 80 (II) PCI: 00:07:1: chip 8086,7111 card , rev 01 class 01,01,80 hdr 00 (II) PCI: 00:07:2: chip 8086,7112 card , rev 01 class 0c,03,00 hdr 00 (II) PCI: 00:07:3: chip 8086,7113 card , rev 01 class 06,80,00 hdr 00 (II) PCI: 01:00:0: chip 10ec,8139 card 14cb,0200 rev 10 class 02,00,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,4), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) PCI-to-CardBus bridge: (II) Bus 1: bridge is at (0:2:0), (0,1,3), BCTRL: 0x0400 (VGA_EN is cleared) (II) Bus 1 I/O range: [0] -1 0 0x1000 - 0x10ff (0x100) IX[B] (II)
Re: saslauthd on AMD64
On Sun, 13 Jul 2008, Martin Schweizer wrote: Hello Duane Do you have some inputs (config files etc.)? $ ls -l /usr/local/lib/sasl2/ -rw-r--r-- 1 root wheel 26 Jun 17 22:11 Sendmail.conf -rw-r--r-- 1 root wheel 22834 Jun 11 19:16 libcrammd5.a -rwxr-xr-x 1 root wheel815 Jun 11 19:16 libcrammd5.la lrwxr-xr-x 1 root wheel 15 Jun 11 19:16 libcrammd5.so - libcrammd5.so.2 -rwxr-xr-x 1 root wheel 24482 Jun 11 19:16 libcrammd5.so.2 -rw-r--r-- 1 root wheel 63976 Jun 11 19:16 libdigestmd5.a -rwxr-xr-x 1 root wheel838 Jun 11 19:16 libdigestmd5.la lrwxr-xr-x 1 root wheel 17 Jun 11 19:16 libdigestmd5.so - libdigestmd5.so.2 -rwxr-xr-x 1 root wheel 57212 Jun 11 19:16 libdigestmd5.so.2 -rw-r--r-- 1 root wheel 20046 Jun 11 19:16 liblogin.a -rwxr-xr-x 1 root wheel809 Jun 11 19:16 liblogin.la lrwxr-xr-x 1 root wheel 13 Jun 11 19:16 liblogin.so - liblogin.so.2 -rwxr-xr-x 1 root wheel 20895 Jun 11 19:16 liblogin.so.2 -rw-r--r-- 1 root wheel 19894 Jun 11 19:16 libplain.a -rwxr-xr-x 1 root wheel809 Jun 11 19:16 libplain.la lrwxr-xr-x 1 root wheel 13 Jun 11 19:16 libplain.so - libplain.so.2 -rwxr-xr-x 1 root wheel 20749 Jun 11 19:16 libplain.so.2 -rw-r--r-- 1 root wheel 68 Jun 17 15:17 smtpd.conf $ cat /usr/local/lib/sasl2/smtpd.conf pwcheck_method: saslauthd mechlist: LOGIN PLAIN CRAM-MD5 DIGEST-MD5 $ cat /usr/local/etc/saslauthd.conf ldap_servers: ldap://ldap.example.com ldap_bind_dn: [EMAIL PROTECTED] ldap_bind_pw: password ldap_search_base: cn=%d ldap_filter: mail=%u ldap_timeout: 60 ldap_time_limit: 60 Am Sun, Jun 15, 2008 at 11:42:57PM + Duane Hill schrieb: I have an AMD64 install using saslauthd and is failing. An identical installation on i386 works fine. Both installations are running on FreeBSD 7.0-RELEASE with cyrus-sasl-2.1.22_1, and cyrus-sasl-saslauthd-2.1.22. A telnet session to the MTA yields the result: 535 5.7.8 Error: authentication failed: generic failure One of the saslauthd threads then exits: Jun 15 23:09:55 smtpgate kernel: pid 44573 (saslauthd), uid 0: exited on signal 11 (core dumped) I did not have this issue running on the AMD64 6.2-RELEASE. Any help would be appreciated. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: aterm whacked?
On Sat, 12 Jul 2008, Neil Short wrote: I just mem-wiped my laptop and am in the process of installing everything after. I have several issues (linux-firefox with linux-flash plugin crashes on sites with flash), not the least of which is aterm doesn't seem to behave very well. When I run aterm I get: $ aterm aterm has encountered the following problem interacting with X Windows : Request: 64,Error: 8(BadMatch (invalid parameter attributes)) in resource: 0x14D aterm has encountered the following problem interacting with X Windows : Request: 64,Error: 8(BadMatch (invalid parameter attributes)) in resource: 0x14D aterm has encountered the following problem interacting with X Windows : Request: 64,Error: 8(BadMatch (invalid parameter attributes)) in resource: 0x14D etc. Transparency doesn't work right either - which I see is the greatest attraction to aterm. Any ideas? I had this problem with an old Sony Vaio about a year ago. Xorg detected that the correct video driver to use was neomagic. Whatever automatic configuration method I was using at the time decided that I should be running with 32-bit color depth in xorg.conf. It turns out that the neomagic driver doesn't support color depth greater than 24-bits... This misconfiguration worked well enough until something like aterm tried to use transparency, then it would complain about the BadMatch, referring to the color depth that the driver supported versus the color depth that X was configured for, presumably. I found two solutions. One was to edit the Screen section of xorg.conf to remove the entry with DefaultDepth 32. The other was to edit xorg.conf to use the vesa driver instead of the neomagic driver. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: weird restarts when compiling
It doesn't look like overheating, unless the thermal compound, heatsink and temperature monitor are not properly set. The only times I had reboots like that was due to a driver with an irq conflict, a driver accessing incorrect memory, or running out of space on a device (trying to write to non-existent address). ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
screen and curses(?) output
I have discovered the joys of screen to manage processes between/across logins, but I have one small problem. If I run portupgrade and a dialog is displayed, I can't choose any of the displayed options. A tab will move through them but a space bar or arrow key is the same as hitting OK with no changes. is there some setting or different termcap I should use? this is what stty -e displays: speed 9600 baud; 40 rows; 80 columns; lflags: icanon isig iexten echo echoe -echok echoke -echonl echoctl -echoprt -altwerase -noflsh -tostop -flusho pendin -nokerninfo -extproc iflags: -istrip icrnl -inlcr -igncr ixon -ixoff ixany imaxbel -ignbrk brkint -inpck -ignpar -parmrk oflags: opost onlcr -ocrnl -oxtabs -onocr -onlret cflags: cread cs8 -parenb -parodd hupcl -clocal -cstopb -crtscts -dsrflow -dtrflow -mdmbuf discard dsusp eof eol eol2erase erase2 intrkill ^O ^Y ^D undef undef ^? ^H ^C ^U lnext min quitreprint start status stopsusptime ^V 1 ^\ ^R ^Q ^T ^S ^Z 0 werase ^W -- Paul Beard / www.paulbeard.org/ paulbeard.org ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Firefox/epiphany/galeon all crash
On Sun, Jul 13, 2008 at 12:51 AM, Dominic Fandrey [EMAIL PROTECTED] wrote: Kurt Buff wrote: On Tue, Jul 8, 2008 at 4:58 PM, Kurt Buff [EMAIL PROTECTED] wrote: As soon as I log into my gmail account, and several other sites. Running 7-STABLE, amd64 - FF is 2.0.0.14, gecko is 20080628. I'm writing this on my really old Windows laptop snip Haven't heard from anyone on this, so I thought I'd update it. This happens in both gnome and xfce4. What further troubleshooting should I do, or to whom should I report this, to advance the issue? Kurt Install the flashblock plugin and be selective about where you allow flash. Installed Noscript, Adblock Plus and Filterset G, which should block flash also, and I still get the same problem. No joy. It's probably not flash, then. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Would ZFS and gmirror work well together in a two-node failover cluster?
I am looking to put together a two-node high-availability cluster where each node has identical data storage consisting of a set of internal data drives (separate from the boot drive). I want ZFS to manage the drives as a JDBOD in a RAIDZ2 configuration. Thus, if an individual drive misbehaves or fails, ZFS detects and handles the fault. But I'm also looking to mirror this entire setup in real time to a second identical server. Basically, my question is can this work well on FreeBSD while taking full advantage of ZFS? Specifically, my understanding is that the only way to handle the real time mirror is with gmirror and ggated, but it's not clear how gmirror would interact with ZFS. I am assuming that gmirror operates only on individual drives, so if I had a set of 24 drives on each server, there would be 24 mirrored drive pairs. One concern I have is that this setup could run into trouble with gmirror's potentially sabotaging ZFS's RAIDZ2. For example, when a drive starts failing, won't gmirror see it before ZFS does and take the unfavorable action of substituting the corresponding drive in the failover server in subsequent I/O, leaving ZFS's RAIDZ2 out of the loop? This is just one particular scenario, but in general, it's not entirely clear that it's possible to have fine-grained control of when, how much and in what direction gmirror manages synchronization among drive pairs. -Maurice -- Maurice Volaski, [EMAIL PROTECTED] Computing Support, Rose F. Kennedy Center Albert Einstein College of Medicine of Yeshiva University ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
desktop wireless card
Hello: Could anyone recommend a desktop wireless card for freebsd 6.2? Just moved in new place and only wireless in the house. Thanks in advance ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: PACKAGESITE
As far as I know, pkg_add will only fetch dependencies recursively from the Internet when used with -r but it will then ignore PKG_PATH. Seems what you are asking cannot be done this way ... I wonder if portinstall -P (or even -PP) might do what the OP wants? You are correct, according to the man page, portinstall -PP would be his best bet. Except that portinstall is part of portupgrade, which has its own boatload of dependencies. Is there any way to do this with, say, portmaster? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Firefox/epiphany/galeon all crash
On Sun, 13 Jul 2008, Kurt Buff wrote: On Sun, Jul 13, 2008 at 12:51 AM, Dominic Fandrey [EMAIL PROTECTED] wrote: Kurt Buff wrote: On Tue, Jul 8, 2008 at 4:58 PM, Kurt Buff [EMAIL PROTECTED] wrote: As soon as I log into my gmail account, and several other sites. Running 7-STABLE, amd64 - FF is 2.0.0.14, gecko is 20080628. I'm writing this on my really old Windows laptop snip Haven't heard from anyone on this, so I thought I'd update it. This happens in both gnome and xfce4. What further troubleshooting should I do, or to whom should I report this, to advance the issue? Kurt Install the flashblock plugin and be selective about where you allow flash. Installed Noscript, Adblock Plus and Filterset G, which should block flash also, and I still get the same problem. No joy. It's probably not flash, then. Filterset.G is not recommended with Adblock Plus: http://adblockplus.org/en/faq_project#filterset.g -Warren Block * Rapid City, South Dakota USA ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Alert :Safety Precaution
Security Precaution For your security, we have temporarily prevented access to your account. Wells Fargo safeguards your account when there is a possibility that someone other than you is signing on. You may be getting this message because you are signing on from a different location or device. If this is the case, you will need to restore your online banking access. To Restore, please click the link below: [1]Go To Wells Fargo Online References 1. http://www.sanmiguel87.com/galerias/system/ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: PACKAGESITE
[EMAIL PROTECTED] wrote: As far as I know, pkg_add will only fetch dependencies recursively from the Internet when used with -r but it will then ignore PKG_PATH. Seems what you are asking cannot be done this way ... I wonder if portinstall -P (or even -PP) might do what the OP wants? You are correct, according to the man page, portinstall -PP would be his best bet. Except that portinstall is part of portupgrade, which has its own boatload of dependencies. You must be used to sailing in very small boats. Kris ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Firefox 3 problems - SLOW...
Has anyone else had problems with Firefox 3 installed from the ports being massively slow? Unlike on Windows, where the load time for the application is much slower (takes roughly twice as long as FF2 did), but once the application is loaded, it seems to be about the same, on my BSD box, the application loads in a little under half the time, but each page load takes much, much longer (8 minutes for the google firefox start page, 16 minutes for the welcome to Firefox 3 page, 10 minutes for the mozillazine home page, 6 minutes for each mozallazine forum page). On top of this, once the page is loaded, it take 90-120 seconds before you can interact with a page, and even then, interaction is slow - 5 seconds between clicking in the scroll bar and the window moving, 15 seconds between clicking a link and the browser acknowledging the click... Is there maybe an issue with the port, or does the application just not work well on FreeBSD? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: PACKAGESITE
[EMAIL PROTECTED] wrote: As far as I know, pkg_add will only fetch dependencies recursively from the Internet when used with -r but it will then ignore PKG_PATH. Seems what you are asking cannot be done this way ... I wonder if portinstall -P (or even -PP) might do what the OP wants? You are correct, according to the man page, portinstall -PP would be his best bet. Except that portinstall is part of portupgrade, which has its own boatload of dependencies. Is there any way to do this with, say, portmaster? Not yet. :) Doug -- This .signature sanitized for your protection ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Firefox 3 problems - SLOW...
On Sun 2008-07-13 18:24:50 UTC-0600, Keith Seyffarth ([EMAIL PROTECTED]) wrote: Has anyone else had problems with Firefox 3 installed from the ports being massively slow? No. I installed it from Ports on a FreeBSD 7.0 and it seemed to run with no major dramas. Certainly no long delays between page views like you're experiencing. It sounds like you might be having some sort of networking (DNS?) issue. To rule that out, one experiment you can try is to browse some local files, eg. /usr/share/doc/handbook/index.html ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Firefox/epiphany/galeon all crash
On Sun, Jul 13, 2008 at 5:16 PM, Warren Block [EMAIL PROTECTED] wrote: On Sun, 13 Jul 2008, Kurt Buff wrote: On Sun, Jul 13, 2008 at 12:51 AM, Dominic Fandrey [EMAIL PROTECTED] wrote: Kurt Buff wrote: On Tue, Jul 8, 2008 at 4:58 PM, Kurt Buff [EMAIL PROTECTED] wrote: As soon as I log into my gmail account, and several other sites. Running 7-STABLE, amd64 - FF is 2.0.0.14, gecko is 20080628. I'm writing this on my really old Windows laptop snip Haven't heard from anyone on this, so I thought I'd update it. This happens in both gnome and xfce4. What further troubleshooting should I do, or to whom should I report this, to advance the issue? Kurt Install the flashblock plugin and be selective about where you allow flash. Installed Noscript, Adblock Plus and Filterset G, which should block flash also, and I still get the same problem. No joy. It's probably not flash, then. Filterset.G is not recommended with Adblock Plus: http://adblockplus.org/en/faq_project#filterset.g Nice to know - but I don't think removing it will help (I'm going to...), because I didn't have any extensions installed when I notice the issue, right after installing FF. Kurt ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Firefox 3 problems - SLOW...
On Sun, Jul 13, 2008 at 06:24:50PM -0600, Keith Seyffarth wrote: Has anyone else had problems with Firefox 3 installed from the ports being massively slow? Unlike on Windows, where the load time for the application is much slower (takes roughly twice as long as FF2 did), but once the application is loaded, it seems to be about the same, on my BSD box, the application loads in a little under half the time, but each page load takes much, much longer (8 minutes for the google firefox start page, 16 minutes for the welcome to Firefox 3 page, 10 minutes for the mozillazine home page, 6 minutes for each mozallazine forum page). On top of this, once the page is loaded, it take 90-120 seconds before you can interact with a page, and even then, interaction is slow - 5 seconds between clicking in the scroll bar and the window moving, 15 seconds between clicking a link and the browser acknowledging the click... I did experience this, and I had to tweak the following settings in about:config before the experience became usable: network.http.pipelining: true network.http.pipelining.maxrequests: 10 network.http.pipelining.ssl: true The image loading and display code seems to have changed significantly, and some unintended behaviour seems to have been introduced. (I also get ugly black boxes images if there is an resized image in the loaded page.) Hope this helps. -- Jonathan Chen [EMAIL PROTECTED] We laugh in the face of danger, we drop icecubes down the vest of fear - Edmond Blackadder III ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: PACKAGESITE
... portinstall is part of portupgrade, which has its own boatload of dependencies. You must be used to sailing in very small boats. From lurking on questions@ for a while, I have gotten the impression that ruby alone would pretty well fill up a Panamax :) ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: saslauthd on AMD64
On Sun, Jul 13, 2008 at 04:58:56PM +, Duane Hill wrote:
On Sun, 13 Jul 2008, Martin Schweizer wrote:
Hello Duane
Do you have some inputs (config files etc.)?
$ ls -l /usr/local/lib/sasl2/
-rw-r--r-- 1 root wheel 26 Jun 17 22:11 Sendmail.conf
-rw-r--r-- 1 root wheel 22834 Jun 11 19:16 libcrammd5.a
-rwxr-xr-x 1 root wheel815 Jun 11 19:16 libcrammd5.la
lrwxr-xr-x 1 root wheel 15 Jun 11 19:16 libcrammd5.so - libcrammd5.so.2
-rwxr-xr-x 1 root wheel 24482 Jun 11 19:16 libcrammd5.so.2
-rw-r--r-- 1 root wheel 63976 Jun 11 19:16 libdigestmd5.a
-rwxr-xr-x 1 root wheel838 Jun 11 19:16 libdigestmd5.la
lrwxr-xr-x 1 root wheel 17 Jun 11 19:16 libdigestmd5.so -
libdigestmd5.so.2
-rwxr-xr-x 1 root wheel 57212 Jun 11 19:16 libdigestmd5.so.2
-rw-r--r-- 1 root wheel 20046 Jun 11 19:16 liblogin.a
-rwxr-xr-x 1 root wheel809 Jun 11 19:16 liblogin.la
lrwxr-xr-x 1 root wheel 13 Jun 11 19:16 liblogin.so - liblogin.so.2
-rwxr-xr-x 1 root wheel 20895 Jun 11 19:16 liblogin.so.2
-rw-r--r-- 1 root wheel 19894 Jun 11 19:16 libplain.a
-rwxr-xr-x 1 root wheel809 Jun 11 19:16 libplain.la
lrwxr-xr-x 1 root wheel 13 Jun 11 19:16 libplain.so - libplain.so.2
-rwxr-xr-x 1 root wheel 20749 Jun 11 19:16 libplain.so.2
-rw-r--r-- 1 root wheel 68 Jun 17 15:17 smtpd.conf
$ cat /usr/local/lib/sasl2/smtpd.conf
pwcheck_method: saslauthd
mechlist: LOGIN PLAIN CRAM-MD5 DIGEST-MD5
$ cat /usr/local/etc/saslauthd.conf
ldap_servers: ldap://ldap.example.com
ldap_bind_dn: [EMAIL PROTECTED]
ldap_bind_pw: password
ldap_search_base: cn=%d
ldap_filter: mail=%u
ldap_timeout: 60
ldap_time_limit: 60
snip
Really just a guess as you are using LDAP. Try the attached patch and
rebuild cyrus-sasl2-saslauthd. If it doesn't help, try rebuilding sasl*
and openldap-client using WITH_DEBUG defined and post backtrace.
HTH,
Yuri
Index: ports/security/cyrus-sasl2-saslauthd/Makefile
===
RCS file: /home/ncvs/ports/security/cyrus-sasl2-saslauthd/Makefile,v
retrieving revision 1.51
diff -u -r1.51 Makefile
--- ports/security/cyrus-sasl2-saslauthd/Makefile 7 Aug 2007 16:46:22
- 1.51
+++ ports/security/cyrus-sasl2-saslauthd/Makefile 14 Jul 2008 02:31:44
-
@@ -62,6 +62,9 @@
WANT_OPENLDAP_VER= ${WITH_OPENLDAP_VER}
.endif
USE_OPENLDAP= yes
+.if ${WANT_OPENLDAP_VER} = 23
+CFLAGS+=-DLDAP_DEPRECATED
+.endif
CONFIGURE_ARGS+=--with-ldap=${LOCALBASE}
.endif
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Firefox 3 problems - SLOW...
On 2008.07.14 14:08:03, Jonathan Chen wrote: On Sun, Jul 13, 2008 at 06:24:50PM -0600, Keith Seyffarth wrote: Has anyone else had problems with Firefox 3 installed from the ports being massively slow? Unlike on Windows, where the load time for the application is much slower (takes roughly twice as long as FF2 did), but once the application is loaded, it seems to be about the same, on my BSD box, the application loads in a little under half the time, but each page load takes much, much longer (8 minutes for the google firefox start page, 16 minutes for the welcome to Firefox 3 page, 10 minutes for the mozillazine home page, 6 minutes for each mozallazine forum page). On top of this, once the page is loaded, it take 90-120 seconds before you can interact with a page, and even then, interaction is slow - 5 seconds between clicking in the scroll bar and the window moving, 15 seconds between clicking a link and the browser acknowledging the click... I know it's not pleasant, but make sure all of your ports are updated (if they aren't already). There were some significant changes that had to happen to get FF3 running; namely, poppler and everything that depends on it. I did experience this, and I had to tweak the following settings in about:config before the experience became usable: network.http.pipelining: true network.http.pipelining.maxrequests: 10 network.http.pipelining.ssl: true The image loading and display code seems to have changed significantly, and some unintended behaviour seems to have been introduced. (I also get ugly black boxes images if there is an resized image in the loaded page.) I also get the annoying black boxes. I haven't tested it thoroughly yet, but it seems to happen most often with resized png images. That could just be a result of the pages I visit though; they seem to use pngs quite extensively. As for performance problems, I have noticed that FF3 is slower than FF2 at loading pages with many images, and I've had a lot of trouble with Flash (as usual). But the problems are not so significant that I've been forced to uninstall it. I wonder if your settings will help ... ~Jason ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Firefox 3 problems - SLOW...
I did experience this, and I had to tweak the following settings in about:config before the experience became usable: network.http.pipelining: true network.http.pipelining.maxrequests: 10 network.http.pipelining.ssl: true The image loading and display code seems to have changed significantly, and some unintended behaviour seems to have been introduced. (I also get ugly black boxes images if there is an resized image in the loaded page.) Hope this helps. Yes, I have the same problem (lagg and black boxes), not only on FreeBSD but also on Gentoo Linux. However I do not have that MUCH lag. I'll try with your settings. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Firefox 3 problems - SLOW...
On Sun, 13 Jul 2008, Jason W. Morgan wrote: I also get the annoying black boxes. I haven't tested it thoroughly yet, but it seems to happen most often with resized png images. That could just be a result of the pages I visit though; they seem to use pngs quite extensively. That's a known bug: https://bugzilla.mozilla.org/show_bug.cgi?id=414928 As for performance problems, I have noticed that FF3 is slower than FF2 at loading pages with many images, and I've had a lot of trouble with Flash (as usual). But the problems are not so significant that I've been forced to uninstall it. FF3 seems to be faster than 2.0.0.14 for me (on 7.0-STABLE). Flash 7 seems to be no worse than 2.0.0.14, which is to say that it works maybe half the places it's used, and does nothing on the others. Come to think of it, 2.0.0.14 would lock up on many of those, and FF3 does not. Adblock Plus and FlashBlock help, too. One other note: FF3 wanted to check my extensions for compatibility almost every time it started. A process for disabling that check is described here: http://kb.mozillazine.org/Updating_extensions It's just adding these two settings to about:config: extensions.checkCompatibility false extensions.checkUpdateSecurity false That didn't stop every check, though. Adding those two settings to the default profile (/usr/local/lib/firefox3/defaults/profile/prefs.js) in addition to the user settings seemed to stop all the checks. -Warren Block * Rapid City, South Dakota USA ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
How to delete mail letter
I use mail command to read mail and quit mail,like follows: $mail ?1 ?q Save 1 message in mbox Then I use mail command again $mail No mail for edward How to delete my letter in mbox which have read? Thanks -- Confidentiality Notice: The information contained in this e-mail and any accompanying attachment(s) is intended only for the use of the intended recipient and may be confidential and/or privileged of Neusoft Group Ltd., its subsidiaries and/or its affiliates. If any reader of this communication is not the intended recipient, unauthorized use, forwarding, printing, storing, disclosure or copying is strictly prohibited, and may be unlawful. If you have received this communication in error, please immediately notify the sender by return e-mail, and delete the original message and all copies from your system. Thank you. --- ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: How to delete mail letter
On Mon, 14 Jul 2008 11:26:46 +0800
EdwardKing [EMAIL PROTECTED] wrote:
I use mail command to read mail and quit mail,like follows:
$mail
?1
?q
Save 1 message in mbox
Then I use mail command again
$mail
No mail for edward
How to delete my letter in mbox which have read?
man mail
[...]
Disposing of Mail
After examining a message you can delete (d) the message or reply (r) to
it. Deletion causes the mail program to forget about the message. This
is not irreversible; the message can be undeleted (u) by giving its num-
ber, or the mail session can be aborted by giving the exit (x) command.
Deleted messages will, however, usually disappear never to be seen again.
[...]
_
{Beto|Norberto|Numard} Meijome
I used to hate weddings; all the Grandmas would poke me and
say, You're next sonny! They stopped doing that when i
started to do it to them at funerals.
I speak for myself, not my employer. Contents may be hot. Slippery when wet.
Reading disclaimers makes you go blind. Writing them is worse. You have been
Warned.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Firefox 3 problems - SLOW...
I did experience this, and I had to tweak the following settings in about:config before the experience became usable: network.http.pipelining: true network.http.pipelining.maxrequests: 10 network.http.pipelining.ssl: true The image loading and display code seems to have changed significantly, and some unintended behaviour seems to have been introduced. (I also get ugly black boxes images if there is an resized image in the loaded page.) Johnathan, thanks a ton, that seems to have corrected it. We're now back to nearly the performance of FF2. Though I haven't seen the black images issue yet. Thanks, Keith S ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: How to delete mail letter
On Mon, 14 Jul 2008 11:26:46 +0800, EdwardKing [EMAIL PROTECTED] wrote: How to delete my letter in mbox which have read? To run the mail program when no new mail is available: % mail -f Existing mails in your ~/mbox will be listed with numbers; to delete, use d 1 2 5 or d 1-10, just as you like. Further instructions can be seen in man mail. :-) -- Polytropon From Magdeburg, Germany Happy FreeBSD user since 4.0 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Firefox 3 problems - SLOW...
On Sun, 13 Jul 2008, Warren Block wrote: One other note: FF3 wanted to check my extensions for compatibility almost every time it started. A process for disabling that check is described here: http://kb.mozillazine.org/Updating_extensions It's just adding these two settings to about:config: extensions.checkCompatibility false extensions.checkUpdateSecurity false That didn't stop every check, though. Adding those two settings to the default profile (/usr/local/lib/firefox3/defaults/profile/prefs.js) in addition to the user settings seemed to stop all the checks. Update: no it didn't. -Warren Block * Rapid City, South Dakota USA ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Apache 2 in 6.0 jails: Connection refused: connect to listener on0.0.0.0:80
Philippe, Ha, I had the same problem in 7.0 jails. :) So, here is a response to your email from 2 years ago: I made this change in httpd.conf and the problem seems gone: -Listen 80 +Listen 208.69.40.119:80 Rudy Your message from 2 years ago: Hi, Every now and then, Apache 2.2.2 starts filling my httpd-error.log with thousands of lines like: [Sat Jul 08 20:57:32 2006] [warn] (61)Connection refused: connect to listener on 0.0.0.0:80 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
