Re: Dumb down a Netgear Smart Switch
Em Ter, 2013-03-19 às 17:09 -1000, Al Plant escreveu: Aloha, Anybody on our list who can tell me how to set a Netgear GS108T 8 Port Smart Switch (Gigabit) to pass thru to a modem under FreeBSD. I have 2 other (non Smart) ones working with FreeBSD just fine in my rack and need to have the new one connect with a DSL modem on a static address. The instructions they sent me along with the switch that was a replacement for a non smart one at no charge is the type for using a DHCP service on Microsoft. (I cant complain about the up grade but its over kill for my purpose. Any help would be appreciated. Hello, My experience with smart switches is at minimum not good they sometimes block, they need programming, I had an experience with a dell smart switch that blocks the entire network of servers when a set of diskless stations boots, the only solution is to make it dumber. finally we changed that one for about 3 cisco gigabit 48 ports dumb switches and never ever heard about network problems again... Sergio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: Dumb down a Netgear Smart Switch
On Wed, 20 Mar 2013, Sergio de Almeida Lenzi wrote: Em Ter, 2013-03-19 às 17:09 -1000, Al Plant escreveu: Aloha, Anybody on our list who can tell me how to set a Netgear GS108T 8 Port Smart Switch (Gigabit) to pass thru to a modem under FreeBSD. I have 2 other (non Smart) ones working with FreeBSD just fine in my rack and need to have the new one connect with a DSL modem on a static address. I have one of that model, and if you reset to factory defaults it should act as a dumb switch. There are some options that could be set that would interfere with operation (flow control, port negotiation, etc) but I am confident that none are set in the factory default configuration. (Stick a pin in the hole while power cycling). daniel feenberg ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Dumb down a Netgear Smart Switch
Aloha, Anybody on our list who can tell me how to set a Netgear GS108T 8 Port Smart Switch (Gigabit) to pass thru to a modem under FreeBSD. I have 2 other (non Smart) ones working with FreeBSD just fine in my rack and need to have the new one connect with a DSL modem on a static address. The instructions they sent me along with the switch that was a replacement for a non smart one at no charge is the type for using a DHCP service on Microsoft. (I cant complain about the up grade but its over kill for my purpose. Any help would be appreciated. ~Al Plant - Honolulu, Hawaii - Phone: 808-284-2740 + http://hawaiidakine.com + http://freebsdinfo.org + + http://aloha50.net - Supporting - FreeBSD 7.2 - 8.0 - 9* + email: n...@hdk5.net All that's really worth doing is what we do for others.- Lewis Carrol ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org