Re: [GNC] House renovation Expense or Asset?
Thank you for your responses. At this stage there are no taxation issues, such as capital gains, to take into account as I'm living in S.E. Asia. I am just looking at a simplified way of recording all expenses incurred in connection with the renovation. I have an asset parent account set up as "House" and a sub-account to that as "Renovation". I also have an expense account as "Home Repair". My thoughts are that anything spent on Renovation adds to the asset and is technically not an expense to be recorded as Home Repair? Am I correct on this? Cheers On Sat, May 12, 2018 at 4:35 AM, Mike or Penny Novack < stepbystepf...@dialup4less.com> wrote: > On 5/11/2018 1:21 PM, Tony Vanson wrote: > > I assume that when all the construction is finished, the total cost could >> be assumed to be treated as an asset increase to the value of the house? >> In this instance, would all additional expenses occurring during >> construction be treated as a debit on my bank account but a credit as an >> asset increase? >> I would really appreciate some advice from any of the many knowledgeable >> users on this forum. >> >> Correct, with the caveat that while we are competent to tell you HOW to > do things using gnucash, and while many of us KNOW the the correct answer, > we do not hold the qualifications to give accounting/tax advice of this > sort. At least I do not. > > Michael D Novack > > PS -- Do you understand WHY this is a tax issue? Again speaking as an > "amateur", living expenses are not deductible, maintenance expenses are not > deductible, but capital improvement expenses eventually ARE (in effect) > deductible from the capital gain which may result when you sell the house. > Raising the basis reduces the gain. > > -- > There is no possibility of social justice on a dead planet except the > equality of the grave. > > > ___ > gnucash-user mailing list > gnucash-user@gnucash.org > To update your subscription preferences or to unsubscribe: > https://lists.gnucash.org/mailman/listinfo/gnucash-user > If you are using Nabble or Gmane, please see > https://wiki.gnucash.org/wiki/Mailing_Lists for more information. > - > Please remember to CC this list on all your replies. > You can do this by using Reply-To-List or Reply-All. > -- *Tony Vanson* *The older I get,* *the better I was* ___ gnucash-user mailing list gnucash-user@gnucash.org To update your subscription preferences or to unsubscribe: https://lists.gnucash.org/mailman/listinfo/gnucash-user If you are using Nabble or Gmane, please see https://wiki.gnucash.org/wiki/Mailing_Lists for more information. - Please remember to CC this list on all your replies. You can do this by using Reply-To-List or Reply-All.
Re: [GNC] Up grade from 2.6.xx to 3.1
Yes, I ran the autoremove I then tried the rm commands and it seems the directories are already gone after the autoremove. wheris gnucash returned emtpy. Thanks, Dennis On Fri, May 11, 2018 at 5:34 PM, Adrien Monteleone < adrien.montele...@lusfiber.net> wrote: > Nope. > > Just: > > sudo apt autoremove > > will do. > > Then run the rm commands. After that, there should be nothing left of > gnucash’s prior installation. > > Regards, > Adrien > > > On May 11, 2018, at 4:32 PM, Dennis Powlesswrote: > > > > Ok > > Do I have to include anymore information or just type > > sudo apt autoremove > > > > Yes, those directories contain files. > > > > D > > > > On Fri, May 11, 2018 at 5:07 PM, Adrien Monteleone < > adrien.montele...@lusfiber.net> wrote: > > You can run the dpkg command. I don’t suspect it will remove anything > extra. If not, then you can proceed with the rm commands. You might want to > take a look at those directories. It’s possible they are now empty, but the > directories were not removed. (It seems /etc/gnucash is gone now however) > > > > Before you get to rm though, I’d also run the autoremove command that > apt suggested to clean up all of those no-longer needed packages. (some of > which were part of the original gnucash installation as it noted.) > > > > Regards, > > Adrien > > > > > On May 11, 2018, at 4:01 PM, Dennis Powless > wrote: > > > > > > This was the output. > > > > > > dennis@dennis-XPS-8500:~$ sudo apt list --installed | grep gnucash > > > [sudo] password for dennis: > > > > > > WARNING: apt does not have a stable CLI interface. Use with caution in > scripts. > > > > > > gnucash-common/xenial-getdeb,xenial-getdeb,now 1:2.6.17-1~getdeb1 all > [installed,auto-removable] > > > gnucash-docs/xenial,xenial,now 2.6.12-1 all [installed,auto-removable] > > > dennis@dennis-XPS-8500:~$ sudo apt-get remove --purge gnucash > > > Reading package lists... Done > > > Building dependency tree > > > Reading state information... Done > > > The following packages were automatically installed and are no longer > required: > > > cabextract gnucash-common gnucash-docs guile-2.0 libaqbanking-data > libaqbanking35 libaqbanking35-plugins libaqebics0 libaqhbci22 > libaqofxconnect7 > > > libclass-singleton-perl libcommon-sense-perl libdate-manip-perl > libdatetime-locale-perl libdatetime-perl libdatetime-timezone-perl libdbi1 > libfinance-quote-perl > > > libglade2-0 libgnomecanvas2-0 libgnomecanvas2-common > libgoffice-0.8-8 libgoffice-0.8-8-common libgsf-1-114 libgsf-1-common > libgwengui-gtk2-0 libgwenhywfar-data > > > libgwenhywfar60 libhtml-tableextract-perl libjavascriptcoregtk-1.0-0 > libjson-perl libjson-xs-perl libktoblzcheck1v5 libllvm3.8 > libmodule-implementation-perl > > > libmodule-runtime-perl libmspack0 libofx6 libosp5 > libparams-classify-perl libparams-validate-perl libqmi-glib1 > libtry-tiny-perl libtypes-serialiser-perl > > > libwebkitgtk-1.0-0 libwebkitgtk-1.0-common libxmlsec1 > linux-headers-4.4.0-101 linux-headers-4.4.0-101-generic > linux-headers-4.4.0-103 > > > linux-headers-4.4.0-103-generic linux-headers-4.4.0-104 > linux-headers-4.4.0-104-generic linux-headers-4.4.0-108 > linux-headers-4.4.0-108-generic > > > linux-headers-4.4.0-109 linux-headers-4.4.0-109-generic > linux-headers-4.4.0-112 linux-headers-4.4.0-112-generic > linux-headers-4.4.0-116 > > > linux-headers-4.4.0-116-generic linux-headers-4.4.0-119 > linux-headers-4.4.0-119-generic linux-headers-4.4.0-121 > linux-headers-4.4.0-121-generic > > > linux-headers-4.4.0-65 linux-headers-4.4.0-65-generic > linux-headers-4.4.0-66 linux-headers-4.4.0-66-generic > linux-headers-4.4.0-70 linux-headers-4.4.0-70-generic > > > linux-headers-4.4.0-71 linux-headers-4.4.0-71-generic > linux-headers-4.4.0-72 linux-headers-4.4.0-72-generic > linux-headers-4.4.0-75 linux-headers-4.4.0-75-generic > > > linux-headers-4.4.0-78 linux-headers-4.4.0-78-generic > linux-headers-4.4.0-79 linux-headers-4.4.0-79-generic > linux-headers-4.4.0-81 linux-headers-4.4.0-81-generic > > > linux-headers-4.4.0-83 linux-headers-4.4.0-83-generic > linux-headers-4.4.0-87 linux-headers-4.4.0-87-generic > linux-headers-4.4.0-89 linux-headers-4.4.0-89-generic > > > linux-headers-4.4.0-91 linux-headers-4.4.0-91-generic > linux-headers-4.4.0-92 linux-headers-4.4.0-92-generic > linux-headers-4.4.0-93 linux-headers-4.4.0-93-generic > > > linux-headers-4.4.0-96 linux-headers-4.4.0-96-generic > linux-headers-4.4.0-97 linux-headers-4.4.0-97-generic > linux-headers-4.4.0-98 linux-headers-4.4.0-98-generic > > > linux-image-4.4.0-101-generic linux-image-4.4.0-103-generic > linux-image-4.4.0-104-generic linux-image-4.4.0-108-generic > linux-image-4.4.0-109-generic > > > linux-image-4.4.0-112-generic linux-image-4.4.0-116-generic > linux-image-4.4.0-119-generic linux-image-4.4.0-121-generic > linux-image-4.4.0-65-generic > > > linux-image-4.4.0-66-generic linux-image-4.4.0-70-generic
Re: [GNC] Up grade from 2.6.xx to 3.1
Nope. Just: sudo apt autoremove will do. Then run the rm commands. After that, there should be nothing left of gnucash’s prior installation. Regards, Adrien > On May 11, 2018, at 4:32 PM, Dennis Powlesswrote: > > Ok > Do I have to include anymore information or just type > sudo apt autoremove > > Yes, those directories contain files. > > D > > On Fri, May 11, 2018 at 5:07 PM, Adrien Monteleone > wrote: > You can run the dpkg command. I don’t suspect it will remove anything extra. > If not, then you can proceed with the rm commands. You might want to take a > look at those directories. It’s possible they are now empty, but the > directories were not removed. (It seems /etc/gnucash is gone now however) > > Before you get to rm though, I’d also run the autoremove command that apt > suggested to clean up all of those no-longer needed packages. (some of which > were part of the original gnucash installation as it noted.) > > Regards, > Adrien > > > On May 11, 2018, at 4:01 PM, Dennis Powless wrote: > > > > This was the output. > > > > dennis@dennis-XPS-8500:~$ sudo apt list --installed | grep gnucash > > [sudo] password for dennis: > > > > WARNING: apt does not have a stable CLI interface. Use with caution in > > scripts. > > > > gnucash-common/xenial-getdeb,xenial-getdeb,now 1:2.6.17-1~getdeb1 all > > [installed,auto-removable] > > gnucash-docs/xenial,xenial,now 2.6.12-1 all [installed,auto-removable] > > dennis@dennis-XPS-8500:~$ sudo apt-get remove --purge gnucash > > Reading package lists... Done > > Building dependency tree > > Reading state information... Done > > The following packages were automatically installed and are no longer > > required: > > cabextract gnucash-common gnucash-docs guile-2.0 libaqbanking-data > > libaqbanking35 libaqbanking35-plugins libaqebics0 libaqhbci22 > > libaqofxconnect7 > > libclass-singleton-perl libcommon-sense-perl libdate-manip-perl > > libdatetime-locale-perl libdatetime-perl libdatetime-timezone-perl libdbi1 > > libfinance-quote-perl > > libglade2-0 libgnomecanvas2-0 libgnomecanvas2-common libgoffice-0.8-8 > > libgoffice-0.8-8-common libgsf-1-114 libgsf-1-common libgwengui-gtk2-0 > > libgwenhywfar-data > > libgwenhywfar60 libhtml-tableextract-perl libjavascriptcoregtk-1.0-0 > > libjson-perl libjson-xs-perl libktoblzcheck1v5 libllvm3.8 > > libmodule-implementation-perl > > libmodule-runtime-perl libmspack0 libofx6 libosp5 libparams-classify-perl > > libparams-validate-perl libqmi-glib1 libtry-tiny-perl > > libtypes-serialiser-perl > > libwebkitgtk-1.0-0 libwebkitgtk-1.0-common libxmlsec1 > > linux-headers-4.4.0-101 linux-headers-4.4.0-101-generic > > linux-headers-4.4.0-103 > > linux-headers-4.4.0-103-generic linux-headers-4.4.0-104 > > linux-headers-4.4.0-104-generic linux-headers-4.4.0-108 > > linux-headers-4.4.0-108-generic > > linux-headers-4.4.0-109 linux-headers-4.4.0-109-generic > > linux-headers-4.4.0-112 linux-headers-4.4.0-112-generic > > linux-headers-4.4.0-116 > > linux-headers-4.4.0-116-generic linux-headers-4.4.0-119 > > linux-headers-4.4.0-119-generic linux-headers-4.4.0-121 > > linux-headers-4.4.0-121-generic > > linux-headers-4.4.0-65 linux-headers-4.4.0-65-generic > > linux-headers-4.4.0-66 linux-headers-4.4.0-66-generic > > linux-headers-4.4.0-70 linux-headers-4.4.0-70-generic > > linux-headers-4.4.0-71 linux-headers-4.4.0-71-generic > > linux-headers-4.4.0-72 linux-headers-4.4.0-72-generic > > linux-headers-4.4.0-75 linux-headers-4.4.0-75-generic > > linux-headers-4.4.0-78 linux-headers-4.4.0-78-generic > > linux-headers-4.4.0-79 linux-headers-4.4.0-79-generic > > linux-headers-4.4.0-81 linux-headers-4.4.0-81-generic > > linux-headers-4.4.0-83 linux-headers-4.4.0-83-generic > > linux-headers-4.4.0-87 linux-headers-4.4.0-87-generic > > linux-headers-4.4.0-89 linux-headers-4.4.0-89-generic > > linux-headers-4.4.0-91 linux-headers-4.4.0-91-generic > > linux-headers-4.4.0-92 linux-headers-4.4.0-92-generic > > linux-headers-4.4.0-93 linux-headers-4.4.0-93-generic > > linux-headers-4.4.0-96 linux-headers-4.4.0-96-generic > > linux-headers-4.4.0-97 linux-headers-4.4.0-97-generic > > linux-headers-4.4.0-98 linux-headers-4.4.0-98-generic > > linux-image-4.4.0-101-generic linux-image-4.4.0-103-generic > > linux-image-4.4.0-104-generic linux-image-4.4.0-108-generic > > linux-image-4.4.0-109-generic > > linux-image-4.4.0-112-generic linux-image-4.4.0-116-generic > > linux-image-4.4.0-119-generic linux-image-4.4.0-121-generic > > linux-image-4.4.0-65-generic > > linux-image-4.4.0-66-generic linux-image-4.4.0-70-generic > > linux-image-4.4.0-71-generic linux-image-4.4.0-72-generic > > linux-image-4.4.0-75-generic > > linux-image-4.4.0-78-generic linux-image-4.4.0-79-generic > > linux-image-4.4.0-81-generic linux-image-4.4.0-83-generic > > linux-image-4.4.0-87-generic > >
Re: [GNC] Up grade from 2.6.xx to 3.1
Ok Do I have to include anymore information or just type sudo apt autoremove Yes, those directories contain files. D On Fri, May 11, 2018 at 5:07 PM, Adrien Monteleone < adrien.montele...@lusfiber.net> wrote: > You can run the dpkg command. I don’t suspect it will remove anything > extra. If not, then you can proceed with the rm commands. You might want to > take a look at those directories. It’s possible they are now empty, but the > directories were not removed. (It seems /etc/gnucash is gone now however) > > Before you get to rm though, I’d also run the autoremove command that apt > suggested to clean up all of those no-longer needed packages. (some of > which were part of the original gnucash installation as it noted.) > > Regards, > Adrien > > > On May 11, 2018, at 4:01 PM, Dennis Powlesswrote: > > > > This was the output. > > > > dennis@dennis-XPS-8500:~$ sudo apt list --installed | grep gnucash > > [sudo] password for dennis: > > > > WARNING: apt does not have a stable CLI interface. Use with caution in > scripts. > > > > gnucash-common/xenial-getdeb,xenial-getdeb,now 1:2.6.17-1~getdeb1 all > [installed,auto-removable] > > gnucash-docs/xenial,xenial,now 2.6.12-1 all [installed,auto-removable] > > dennis@dennis-XPS-8500:~$ sudo apt-get remove --purge gnucash > > Reading package lists... Done > > Building dependency tree > > Reading state information... Done > > The following packages were automatically installed and are no longer > required: > > cabextract gnucash-common gnucash-docs guile-2.0 libaqbanking-data > libaqbanking35 libaqbanking35-plugins libaqebics0 libaqhbci22 > libaqofxconnect7 > > libclass-singleton-perl libcommon-sense-perl libdate-manip-perl > libdatetime-locale-perl libdatetime-perl libdatetime-timezone-perl libdbi1 > libfinance-quote-perl > > libglade2-0 libgnomecanvas2-0 libgnomecanvas2-common libgoffice-0.8-8 > libgoffice-0.8-8-common libgsf-1-114 libgsf-1-common libgwengui-gtk2-0 > libgwenhywfar-data > > libgwenhywfar60 libhtml-tableextract-perl libjavascriptcoregtk-1.0-0 > libjson-perl libjson-xs-perl libktoblzcheck1v5 libllvm3.8 > libmodule-implementation-perl > > libmodule-runtime-perl libmspack0 libofx6 libosp5 > libparams-classify-perl libparams-validate-perl libqmi-glib1 > libtry-tiny-perl libtypes-serialiser-perl > > libwebkitgtk-1.0-0 libwebkitgtk-1.0-common libxmlsec1 > linux-headers-4.4.0-101 linux-headers-4.4.0-101-generic > linux-headers-4.4.0-103 > > linux-headers-4.4.0-103-generic linux-headers-4.4.0-104 > linux-headers-4.4.0-104-generic linux-headers-4.4.0-108 > linux-headers-4.4.0-108-generic > > linux-headers-4.4.0-109 linux-headers-4.4.0-109-generic > linux-headers-4.4.0-112 linux-headers-4.4.0-112-generic > linux-headers-4.4.0-116 > > linux-headers-4.4.0-116-generic linux-headers-4.4.0-119 > linux-headers-4.4.0-119-generic linux-headers-4.4.0-121 > linux-headers-4.4.0-121-generic > > linux-headers-4.4.0-65 linux-headers-4.4.0-65-generic > linux-headers-4.4.0-66 linux-headers-4.4.0-66-generic > linux-headers-4.4.0-70 linux-headers-4.4.0-70-generic > > linux-headers-4.4.0-71 linux-headers-4.4.0-71-generic > linux-headers-4.4.0-72 linux-headers-4.4.0-72-generic > linux-headers-4.4.0-75 linux-headers-4.4.0-75-generic > > linux-headers-4.4.0-78 linux-headers-4.4.0-78-generic > linux-headers-4.4.0-79 linux-headers-4.4.0-79-generic > linux-headers-4.4.0-81 linux-headers-4.4.0-81-generic > > linux-headers-4.4.0-83 linux-headers-4.4.0-83-generic > linux-headers-4.4.0-87 linux-headers-4.4.0-87-generic > linux-headers-4.4.0-89 linux-headers-4.4.0-89-generic > > linux-headers-4.4.0-91 linux-headers-4.4.0-91-generic > linux-headers-4.4.0-92 linux-headers-4.4.0-92-generic > linux-headers-4.4.0-93 linux-headers-4.4.0-93-generic > > linux-headers-4.4.0-96 linux-headers-4.4.0-96-generic > linux-headers-4.4.0-97 linux-headers-4.4.0-97-generic > linux-headers-4.4.0-98 linux-headers-4.4.0-98-generic > > linux-image-4.4.0-101-generic linux-image-4.4.0-103-generic > linux-image-4.4.0-104-generic linux-image-4.4.0-108-generic > linux-image-4.4.0-109-generic > > linux-image-4.4.0-112-generic linux-image-4.4.0-116-generic > linux-image-4.4.0-119-generic linux-image-4.4.0-121-generic > linux-image-4.4.0-65-generic > > linux-image-4.4.0-66-generic linux-image-4.4.0-70-generic > linux-image-4.4.0-71-generic linux-image-4.4.0-72-generic > linux-image-4.4.0-75-generic > > linux-image-4.4.0-78-generic linux-image-4.4.0-79-generic > linux-image-4.4.0-81-generic linux-image-4.4.0-83-generic > linux-image-4.4.0-87-generic > > linux-image-4.4.0-89-generic linux-image-4.4.0-91-generic > linux-image-4.4.0-92-generic linux-image-4.4.0-93-generic > linux-image-4.4.0-96-generic > > linux-image-4.4.0-97-generic linux-image-4.4.0-98-generic > linux-image-extra-4.4.0-101-generic linux-image-extra-4.4.0-103-generic > > linux-image-extra-4.4.0-104-generic linux-image-extra-4.4.0-108-generic > linux-image-extra-4.4.0-109-generic
Re: [GNC] import map editor
I appreciate Stefan raising this issue. I have the opposite issue; not an empty editor, but an editor full of "Map Account NOT found" and "Unspecified" lines. Geert Janssens suggested that my import maps have been corrupted as the most recent comment in my bug filed at https://bugzilla.gnome.org/show_bug.cgi?id=794690 and, having just installed 3.1.3, I'd like to make a go of fixing them. A few questions. * is there documentation somewhere that explains the format of the "Match String" and what it's matched against? * is there any reason not to delete the dozens of lines whose "Mapped to Account Name" is "Map Account NOT found"? * is there any reason not to delete the dozens of lines whose "Mapped to Account Name" is "Unspecified"? * is there any way to edit, as opposed to delete, a line or am I expecting too much of the "Import Map Editor"? Thanks, Eric On Mon, Apr 9, 2018 at 12:53 AM Stefan Muellerwrote: > Hallo all, > can anyone explain the purpose of the "import map editor" shown in the > tools menu? > All what I can find related to mapping imports is this: > https://wiki.gnucash.org/wiki/Bayes > http://gnucash.1415818.n4.nabble.com/Fixing-confused-bayesian > -matching-data-td4685819.html > but there is nothing about the editor. > > Can anyone explain how to use it is still empty after several csv imports. > > Thank you > > Stefan > ___ > gnucash-user mailing list > gnucash-user@gnucash.org > To update your subscription preferences or to unsubscribe: > https://lists.gnucash.org/mailman/listinfo/gnucash-user > If you are using Nabble or Gmane, please see > https://wiki.gnucash.org/wiki/Mailing_Lists for more information. > - > Please remember to CC this list on all your replies. > You can do this by using Reply-To-List or Reply-All. > ___ gnucash-user mailing list gnucash-user@gnucash.org To update your subscription preferences or to unsubscribe: https://lists.gnucash.org/mailman/listinfo/gnucash-user If you are using Nabble or Gmane, please see https://wiki.gnucash.org/wiki/Mailing_Lists for more information. - Please remember to CC this list on all your replies. You can do this by using Reply-To-List or Reply-All.
Re: [GNC] Up grade from 2.6.xx to 3.1
You can run the dpkg command. I don’t suspect it will remove anything extra. If not, then you can proceed with the rm commands. You might want to take a look at those directories. It’s possible they are now empty, but the directories were not removed. (It seems /etc/gnucash is gone now however) Before you get to rm though, I’d also run the autoremove command that apt suggested to clean up all of those no-longer needed packages. (some of which were part of the original gnucash installation as it noted.) Regards, Adrien > On May 11, 2018, at 4:01 PM, Dennis Powlesswrote: > > This was the output. > > dennis@dennis-XPS-8500:~$ sudo apt list --installed | grep gnucash > [sudo] password for dennis: > > WARNING: apt does not have a stable CLI interface. Use with caution in > scripts. > > gnucash-common/xenial-getdeb,xenial-getdeb,now 1:2.6.17-1~getdeb1 all > [installed,auto-removable] > gnucash-docs/xenial,xenial,now 2.6.12-1 all [installed,auto-removable] > dennis@dennis-XPS-8500:~$ sudo apt-get remove --purge gnucash > Reading package lists... Done > Building dependency tree > Reading state information... Done > The following packages were automatically installed and are no longer > required: > cabextract gnucash-common gnucash-docs guile-2.0 libaqbanking-data > libaqbanking35 libaqbanking35-plugins libaqebics0 libaqhbci22 libaqofxconnect7 > libclass-singleton-perl libcommon-sense-perl libdate-manip-perl > libdatetime-locale-perl libdatetime-perl libdatetime-timezone-perl libdbi1 > libfinance-quote-perl > libglade2-0 libgnomecanvas2-0 libgnomecanvas2-common libgoffice-0.8-8 > libgoffice-0.8-8-common libgsf-1-114 libgsf-1-common libgwengui-gtk2-0 > libgwenhywfar-data > libgwenhywfar60 libhtml-tableextract-perl libjavascriptcoregtk-1.0-0 > libjson-perl libjson-xs-perl libktoblzcheck1v5 libllvm3.8 > libmodule-implementation-perl > libmodule-runtime-perl libmspack0 libofx6 libosp5 libparams-classify-perl > libparams-validate-perl libqmi-glib1 libtry-tiny-perl libtypes-serialiser-perl > libwebkitgtk-1.0-0 libwebkitgtk-1.0-common libxmlsec1 > linux-headers-4.4.0-101 linux-headers-4.4.0-101-generic > linux-headers-4.4.0-103 > linux-headers-4.4.0-103-generic linux-headers-4.4.0-104 > linux-headers-4.4.0-104-generic linux-headers-4.4.0-108 > linux-headers-4.4.0-108-generic > linux-headers-4.4.0-109 linux-headers-4.4.0-109-generic > linux-headers-4.4.0-112 linux-headers-4.4.0-112-generic > linux-headers-4.4.0-116 > linux-headers-4.4.0-116-generic linux-headers-4.4.0-119 > linux-headers-4.4.0-119-generic linux-headers-4.4.0-121 > linux-headers-4.4.0-121-generic > linux-headers-4.4.0-65 linux-headers-4.4.0-65-generic > linux-headers-4.4.0-66 linux-headers-4.4.0-66-generic linux-headers-4.4.0-70 > linux-headers-4.4.0-70-generic > linux-headers-4.4.0-71 linux-headers-4.4.0-71-generic > linux-headers-4.4.0-72 linux-headers-4.4.0-72-generic linux-headers-4.4.0-75 > linux-headers-4.4.0-75-generic > linux-headers-4.4.0-78 linux-headers-4.4.0-78-generic > linux-headers-4.4.0-79 linux-headers-4.4.0-79-generic linux-headers-4.4.0-81 > linux-headers-4.4.0-81-generic > linux-headers-4.4.0-83 linux-headers-4.4.0-83-generic > linux-headers-4.4.0-87 linux-headers-4.4.0-87-generic linux-headers-4.4.0-89 > linux-headers-4.4.0-89-generic > linux-headers-4.4.0-91 linux-headers-4.4.0-91-generic > linux-headers-4.4.0-92 linux-headers-4.4.0-92-generic linux-headers-4.4.0-93 > linux-headers-4.4.0-93-generic > linux-headers-4.4.0-96 linux-headers-4.4.0-96-generic > linux-headers-4.4.0-97 linux-headers-4.4.0-97-generic linux-headers-4.4.0-98 > linux-headers-4.4.0-98-generic > linux-image-4.4.0-101-generic linux-image-4.4.0-103-generic > linux-image-4.4.0-104-generic linux-image-4.4.0-108-generic > linux-image-4.4.0-109-generic > linux-image-4.4.0-112-generic linux-image-4.4.0-116-generic > linux-image-4.4.0-119-generic linux-image-4.4.0-121-generic > linux-image-4.4.0-65-generic > linux-image-4.4.0-66-generic linux-image-4.4.0-70-generic > linux-image-4.4.0-71-generic linux-image-4.4.0-72-generic > linux-image-4.4.0-75-generic > linux-image-4.4.0-78-generic linux-image-4.4.0-79-generic > linux-image-4.4.0-81-generic linux-image-4.4.0-83-generic > linux-image-4.4.0-87-generic > linux-image-4.4.0-89-generic linux-image-4.4.0-91-generic > linux-image-4.4.0-92-generic linux-image-4.4.0-93-generic > linux-image-4.4.0-96-generic > linux-image-4.4.0-97-generic linux-image-4.4.0-98-generic > linux-image-extra-4.4.0-101-generic linux-image-extra-4.4.0-103-generic > linux-image-extra-4.4.0-104-generic linux-image-extra-4.4.0-108-generic > linux-image-extra-4.4.0-109-generic linux-image-extra-4.4.0-112-generic > linux-image-extra-4.4.0-116-generic linux-image-extra-4.4.0-119-generic > linux-image-extra-4.4.0-121-generic linux-image-extra-4.4.0-65-generic > linux-image-extra-4.4.0-66-generic
Re: [GNC] Up grade from 2.6.xx to 3.1
This was the output. dennis@dennis-XPS-8500:~$ sudo apt list --installed | grep gnucash [sudo] password for dennis: WARNING: apt does not have a stable CLI interface. Use with caution in scripts. gnucash-common/xenial-getdeb,xenial-getdeb,now 1:2.6.17-1~getdeb1 all [installed,auto-removable] gnucash-docs/xenial,xenial,now 2.6.12-1 all [installed,auto-removable] dennis@dennis-XPS-8500:~$ sudo apt-get remove --purge gnucash Reading package lists... Done Building dependency tree Reading state information... Done The following packages were automatically installed and are no longer required: cabextract gnucash-common gnucash-docs guile-2.0 libaqbanking-data libaqbanking35 libaqbanking35-plugins libaqebics0 libaqhbci22 libaqofxconnect7 libclass-singleton-perl libcommon-sense-perl libdate-manip-perl libdatetime-locale-perl libdatetime-perl libdatetime-timezone-perl libdbi1 libfinance-quote-perl libglade2-0 libgnomecanvas2-0 libgnomecanvas2-common libgoffice-0.8-8 libgoffice-0.8-8-common libgsf-1-114 libgsf-1-common libgwengui-gtk2-0 libgwenhywfar-data libgwenhywfar60 libhtml-tableextract-perl libjavascriptcoregtk-1.0-0 libjson-perl libjson-xs-perl libktoblzcheck1v5 libllvm3.8 libmodule-implementation-perl libmodule-runtime-perl libmspack0 libofx6 libosp5 libparams-classify-perl libparams-validate-perl libqmi-glib1 libtry-tiny-perl libtypes-serialiser-perl libwebkitgtk-1.0-0 libwebkitgtk-1.0-common libxmlsec1 linux-headers-4.4.0-101 linux-headers-4.4.0-101-generic linux-headers-4.4.0-103 linux-headers-4.4.0-103-generic linux-headers-4.4.0-104 linux-headers-4.4.0-104-generic linux-headers-4.4.0-108 linux-headers-4.4.0-108-generic linux-headers-4.4.0-109 linux-headers-4.4.0-109-generic linux-headers-4.4.0-112 linux-headers-4.4.0-112-generic linux-headers-4.4.0-116 linux-headers-4.4.0-116-generic linux-headers-4.4.0-119 linux-headers-4.4.0-119-generic linux-headers-4.4.0-121 linux-headers-4.4.0-121-generic linux-headers-4.4.0-65 linux-headers-4.4.0-65-generic linux-headers-4.4.0-66 linux-headers-4.4.0-66-generic linux-headers-4.4.0-70 linux-headers-4.4.0-70-generic linux-headers-4.4.0-71 linux-headers-4.4.0-71-generic linux-headers-4.4.0-72 linux-headers-4.4.0-72-generic linux-headers-4.4.0-75 linux-headers-4.4.0-75-generic linux-headers-4.4.0-78 linux-headers-4.4.0-78-generic linux-headers-4.4.0-79 linux-headers-4.4.0-79-generic linux-headers-4.4.0-81 linux-headers-4.4.0-81-generic linux-headers-4.4.0-83 linux-headers-4.4.0-83-generic linux-headers-4.4.0-87 linux-headers-4.4.0-87-generic linux-headers-4.4.0-89 linux-headers-4.4.0-89-generic linux-headers-4.4.0-91 linux-headers-4.4.0-91-generic linux-headers-4.4.0-92 linux-headers-4.4.0-92-generic linux-headers-4.4.0-93 linux-headers-4.4.0-93-generic linux-headers-4.4.0-96 linux-headers-4.4.0-96-generic linux-headers-4.4.0-97 linux-headers-4.4.0-97-generic linux-headers-4.4.0-98 linux-headers-4.4.0-98-generic linux-image-4.4.0-101-generic linux-image-4.4.0-103-generic linux-image-4.4.0-104-generic linux-image-4.4.0-108-generic linux-image-4.4.0-109-generic linux-image-4.4.0-112-generic linux-image-4.4.0-116-generic linux-image-4.4.0-119-generic linux-image-4.4.0-121-generic linux-image-4.4.0-65-generic linux-image-4.4.0-66-generic linux-image-4.4.0-70-generic linux-image-4.4.0-71-generic linux-image-4.4.0-72-generic linux-image-4.4.0-75-generic linux-image-4.4.0-78-generic linux-image-4.4.0-79-generic linux-image-4.4.0-81-generic linux-image-4.4.0-83-generic linux-image-4.4.0-87-generic linux-image-4.4.0-89-generic linux-image-4.4.0-91-generic linux-image-4.4.0-92-generic linux-image-4.4.0-93-generic linux-image-4.4.0-96-generic linux-image-4.4.0-97-generic linux-image-4.4.0-98-generic linux-image-extra-4.4.0-101-generic linux-image-extra-4.4.0-103-generic linux-image-extra-4.4.0-104-generic linux-image-extra-4.4.0-108-generic linux-image-extra-4.4.0-109-generic linux-image-extra-4.4.0-112-generic linux-image-extra-4.4.0-116-generic linux-image-extra-4.4.0-119-generic linux-image-extra-4.4.0-121-generic linux-image-extra-4.4.0-65-generic linux-image-extra-4.4.0-66-generic linux-image-extra-4.4.0-70-generic linux-image-extra-4.4.0-71-generic linux-image-extra-4.4.0-72-generic linux-image-extra-4.4.0-75-generic linux-image-extra-4.4.0-78-generic linux-image-extra-4.4.0-79-generic linux-image-extra-4.4.0-81-generic linux-image-extra-4.4.0-83-generic linux-image-extra-4.4.0-87-generic linux-image-extra-4.4.0-89-generic linux-image-extra-4.4.0-91-generic linux-image-extra-4.4.0-92-generic linux-image-extra-4.4.0-93-generic linux-image-extra-4.4.0-96-generic linux-image-extra-4.4.0-97-generic linux-image-extra-4.4.0-98-generic snap-confine Use 'sudo apt autoremove' to remove them. The following packages will be REMOVED: gnucash* 0 upgraded, 0 newly installed, 1 to remove and 8 not upgraded. After this operation, 0 B of additional disk space will be used. Do you want to continue? [Y/n] (Reading database ...
Re: [GNC] House renovation Expense or Asset?
On 5/11/2018 1:21 PM, Tony Vanson wrote: I assume that when all the construction is finished, the total cost could be assumed to be treated as an asset increase to the value of the house? In this instance, would all additional expenses occurring during construction be treated as a debit on my bank account but a credit as an asset increase? I would really appreciate some advice from any of the many knowledgeable users on this forum. Correct, with the caveat that while we are competent to tell you HOW to do things using gnucash, and while many of us KNOW the the correct answer, we do not hold the qualifications to give accounting/tax advice of this sort. At least I do not. Michael D Novack PS -- Do you understand WHY this is a tax issue? Again speaking as an "amateur", living expenses are not deductible, maintenance expenses are not deductible, but capital improvement expenses eventually ARE (in effect) deductible from the capital gain which may result when you sell the house. Raising the basis reduces the gain. -- There is no possibility of social justice on a dead planet except the equality of the grave. ___ gnucash-user mailing list gnucash-user@gnucash.org To update your subscription preferences or to unsubscribe: https://lists.gnucash.org/mailman/listinfo/gnucash-user If you are using Nabble or Gmane, please see https://wiki.gnucash.org/wiki/Mailing_Lists for more information. - Please remember to CC this list on all your replies. You can do this by using Reply-To-List or Reply-All.
Re: [GNC] House renovation Expense or Asset?
All improvements to the house are collected and added to the purchase price when selling the house to reduce the capital gains on the sale. Gary -Original Message- From: gnucash-user [mailto:gnucash-user-bounces+diamondhranchqh=earthlink@gnucash.org] On Behalf Of Tony Vanson Sent: Friday, May 11, 2018 1:21 PM To: David T. via gnucash-user Subject: [GNC] House renovation Expense or Asset? Hopefully I've posted this query in the right area - if not, please accept my apologies. My quandary is that, my recently purchased house, has an uncompleted extension. I have now contracted to have this extension finished. I am unsure how to record the expenses incurred in GNUcash. I assume that when all the construction is finished, the total cost could be assumed to be treated as an asset increase to the value of the house? In this instance, would all additional expenses occurring during construction be treated as a debit on my bank account but a credit as an asset increase? I would really appreciate some advice from any of the many knowledgeable users on this forum. Cheers -- *Tony Vanson* *The older I get,* *the better I was* ___ gnucash-user mailing list gnucash-user@gnucash.org To update your subscription preferences or to unsubscribe: https://lists.gnucash.org/mailman/listinfo/gnucash-user If you are using Nabble or Gmane, please see https://wiki.gnucash.org/wiki/Mailing_Lists for more information. - Please remember to CC this list on all your replies. You can do this by using Reply-To-List or Reply-All. ___ gnucash-user mailing list gnucash-user@gnucash.org To update your subscription preferences or to unsubscribe: https://lists.gnucash.org/mailman/listinfo/gnucash-user If you are using Nabble or Gmane, please see https://wiki.gnucash.org/wiki/Mailing_Lists for more information. - Please remember to CC this list on all your replies. You can do this by using Reply-To-List or Reply-All.
Re: [GNC] House renovation Expense or Asset?
> On May 11, 2018, at 10:21 AM, Tony Vansonwrote: > > Hopefully I've posted this query in the right area - if not, please accept > my apologies. > > My quandary is that, my recently purchased house, has an uncompleted > extension. I have now contracted to have this extension finished. I am > unsure how to record the expenses incurred in GNUcash. > I assume that when all the construction is finished, the total cost could > be assumed to be treated as an asset increase to the value of the house? > In this instance, would all additional expenses occurring during > construction be treated as a debit on my bank account but a credit as an > asset increase? > I would really appreciate some advice from any of the many knowledgeable > users on this forum. > Cheers The following is free advice from a non-professional and you get what you pay for. If the value is large then it's worth the cost to get professional advice. As a general rule improvements like an addition are treated as an increase in asset value ("capitalized"), while maintenance like repainting or replacing a fixture with a like one is expensed. While in general the distinction doesn't matter for personal property, if this house is or will be your primary residence and it's in the US you get a tax benefit in reduced capital gains tax when you sell if you add the improvement cost to your basis. On the other hand if the house is to be a rental then it's a business situation and you want to expense as much as possible for an immediate deduction (and naturally the tax folks have rules to stop you from doing that) rather than to adjust the basis and depreciate it. Regards, John Ralls ___ gnucash-user mailing list gnucash-user@gnucash.org To update your subscription preferences or to unsubscribe: https://lists.gnucash.org/mailman/listinfo/gnucash-user If you are using Nabble or Gmane, please see https://wiki.gnucash.org/wiki/Mailing_Lists for more information. - Please remember to CC this list on all your replies. You can do this by using Reply-To-List or Reply-All.
Re: [GNC] Automated Reporting
Thanks, I'll check it out. On Fri, May 11, 2018 at 1:45 AM Mike Evanswrote: > I have some code > https://github.com/EvansMike/pycash/tree/master/goods_invoice > that I was experimenting with to print invoices. It uses the python > bindings through GnuCash so should work with any backend, at least for > invoices. It doesn't work (as is) anymore as MtGox no longer exists and the > QR code part is just for BitCoin, but that basics of how to get information > out of GnuCash and use a template to produce out may be be of use. Only > tested in Linux. > > Mike E > > > > > On Tue, 24 Apr 2018 04:56:47 + > Justin Phelps wrote: > > > On Mon, Apr 23, 2018 at 9:15 PM Sébastien de Menten > > > wrote: > > > > > With some python skills, you could use piecash ( > > > http://piecash.readthedocs.io/en/master/) to build you own reports and > > > export them in the best format for your needs. > > > We are working to support gnucash 3.0, the current version support > gnucash > > > 2.6. > > > > > > On Mon, Apr 23, 2018, 23:26 Justin Phelps wrote: > > > > > >> I'm hoping there's a command line method for generating reports from a > > >> gnucash file. I want to script a series of daily, weekly, and monthly > > >> reports that are automatically emailed to certain people. I can > achieve > > >> the > > >> scheduling and emailing from my server, but having some way to get > this > > >> data out from gnucash without clicking through the interface would be > > >> really useful. > > >> > > >> How would you approach this challenge? > > >> > > > ___ > > >> gnucash-user mailing list > > >> gnucash-user@gnucash.org > > >> To update your subscription preferences or to unsubscribe: > > >> https://lists.gnucash.org/mailman/listinfo/gnucash-user > > >> If you are using Nabble or Gmane, please see > > >> https://wiki.gnucash.org/wiki/Mailing_Lists for more information. > > >> - > > >> Please remember to CC this list on all your replies. > > >> You can do this by using Reply-To-List or Reply-All. > > >> > > > > > I certainly know more Python than Scheme at this point, so the piecash > > tools seems promising. Does it support the XML style file, or just the > SQL > > based solutions? > > ___ > > gnucash-user mailing list > > gnucash-user@gnucash.org > > To update your subscription preferences or to unsubscribe: > > https://lists.gnucash.org/mailman/listinfo/gnucash-user > > If you are using Nabble or Gmane, please see > https://wiki.gnucash.org/wiki/Mailing_Lists for more information. > > - > > Please remember to CC this list on all your replies. > > You can do this by using Reply-To-List or Reply-All. > ___ gnucash-user mailing list gnucash-user@gnucash.org To update your subscription preferences or to unsubscribe: https://lists.gnucash.org/mailman/listinfo/gnucash-user If you are using Nabble or Gmane, please see https://wiki.gnucash.org/wiki/Mailing_Lists for more information. - Please remember to CC this list on all your replies. You can do this by using Reply-To-List or Reply-All.
[GNC] House renovation Expense or Asset?
Hopefully I've posted this query in the right area - if not, please accept my apologies. My quandary is that, my recently purchased house, has an uncompleted extension. I have now contracted to have this extension finished. I am unsure how to record the expenses incurred in GNUcash. I assume that when all the construction is finished, the total cost could be assumed to be treated as an asset increase to the value of the house? In this instance, would all additional expenses occurring during construction be treated as a debit on my bank account but a credit as an asset increase? I would really appreciate some advice from any of the many knowledgeable users on this forum. Cheers -- *Tony Vanson* *The older I get,* *the better I was* ___ gnucash-user mailing list gnucash-user@gnucash.org To update your subscription preferences or to unsubscribe: https://lists.gnucash.org/mailman/listinfo/gnucash-user If you are using Nabble or Gmane, please see https://wiki.gnucash.org/wiki/Mailing_Lists for more information. - Please remember to CC this list on all your replies. You can do this by using Reply-To-List or Reply-All.
Re: [GNC] Up grade from 2.6.xx to 3.1
Dennis, sudo apt list --installed | grep gnucash will give you a list of any gnucash packages installed with the Ubuntu package manager. If you don’t see gnucash listed, you built it from source. (I still see gnucash-common-2.6.12 when I run that command because I had that version from the repos installed originally, but I don’t see the 2.6.19 that I built from source) Since Ubuntu users /usr and you said a whereis command gave you both /usr/share and /usr/include, I’d be inclined to say you installed it with the package manager, not built from source. *note, for this purpose the package manager doesn’t care which front-end you used, that is ‘aptitude’ ‘apt’ ‘apt-get’ are all the ’same.’ dpkg is a little different in that you can use it to install a .deb package downloaded directly, but as far as I know, there are no .deb packages of GnuCash anywhere so I’d say it’s safe to say you didn’t use that method. (I think the apt command above would still return such an install however as it gets registered with the package manager) Regards, Adrien > On May 10, 2018, at 10:35 PM, Dennis Powlesswrote: > > I read up on uninstalling programs and about the - -purge command but didn’t > know how to combine it with the dbkg command. > > To be honest, I don’t remember how I installed it gnucash on that machine. > > > > Sent from my iPhone > >> On May 10, 2018, at 8:30 PM, David Cousens wrote: >> >> Dennis, >> >> If you use the --purge switch with apt remove i.e. >> >> sudo apt-get remove gnucash >> >> it should remove those configuration files in /usr/etc and /usr/include and >> /usr/share files as well. A post on AskUbuntu indicates that the --purge >> switch does not remove configuration and data files in the user's home >> directory. The man page on apt-get purge indicates it removes configuration >> and data files but does not specify whether that is in the user's home >> directory or not. I think apt on Linux Mint is somewhat similar to aptitude >> on Ubuntu but at present I don't have Ubuntu running on a VM to test it out. >> The user preference files are in /home/dennis/.gnucash for v 2.6. ( In V 3.1 >> they are located in /home/dennis/.local/share/gnucash - conversion is >> automatic on the first run of v3.1). If you rename the >> /home/dennis/.gnucash directory to /home/dennis/.old-gnucash before using >> the "sudo apt remove --purge gnucash" command and then rename them back to >> the original after having done that, you can avoid any possibility of >> deleting the preference files. >> >> The Ubuntu 16.04 distro appears to put its distribution version in >> /usr as the prefix rather than /usr/local. >> >>> On Thu, 2018-05-10 at 16:02 -0400, Dennis Powless wrote: >>> I was able to use the remove feature in Ubuntu Software. however after >>> I ran that, I did the whereis gnucash and this is the output. >>> >>> dennis@dennis-XPS-8500:~$ whereis gnucash >>> gnucash: /etc/gnucash /usr/include/gnucash /usr/share/gnucash >>> >>> >>> I then did >>> sudo apt-get remove gnucash >>> >>> repeated whereis gnucash with same output. >>> >>> I don't have anything /gnucash in the lib directory >>> >>> Here is the output of the lib directory >>> >>> dennis@dennis-XPS-8500:/lib$ ls >>> apparmorklibc-k3La8MUnuzHQ0_kG8hokcGAC0PA.so recovery-mode >>> brltty ld-linux.so.2 resolvconf >>> cpp ld-lsb.so.1 systemd >>> crdald-lsb.so.2 sysvinit >>> firmwareld-lsb.so.3 terminfo >>> hdparm linux-sound-base udev >>> i386-linux-gnu lsb ufw >>> ifupdownmodprobe.dx86_64-linux-gnu >>> initmodules xtables >>> >>> >>> Output of the ls on i386-linux-gnu >>> >>> dennis@dennis-XPS-8500:/lib/i386-linux-gnu$ ls >>> ld-2.23.so libc-2.23.so libdl-2.23.so libnsl-2.23.so >>> libnss_files-2.23.solibnss_nisplus.so.2 libresolv.so.2 >>> libutil-2.23.so >>> ld-linux.so.2libcidn-2.23.so libdl.so.2 libnsl.so.1 >>> libnss_files.so.2 libnss_nis.so.2 librt-2.23.so >>> libutil.so.1 >>> libanl-2.23.so libcidn.so.1 libgcc_s.so.1 >>> libnss_compat-2.23.so libnss_hesiod-2.23.so libpcprofile.so >>> librt.so.1 libz.so.1 >>> libanl.so.1 libcrypt-2.23.so libm-2.23.so >>> libnss_compat.so.2 libnss_hesiod.so.2 libpthread-2.23.so >>> libSegFault.so libz.so.1.2.8 >>> libBrokenLocale-2.23.so libcrypt.so.1 libmemusage.so >>> libnss_dns-2.23.so libnss_nis-2.23.so libpthread.so.0 >>> libthread_db-1.0.so >>> libBrokenLocale.so.1 libc.so.6 libm.so.6 libnss_dns.so.2 >>>
Re: [GNC] Up grade from 2.6.xx to 3.1
Dennis, If you use the --purge switch with apt remove i.e. sudo apt-get remove --purge gnucash it should remove those configuration files in /usr/etc and /usr/include and /usr/share files as well. A post on AskUbuntu indicates that the --purge switch does not remove configuration and data files in the user's home directory. The man page on apt-get purge indicates it removes configuration and data files but does not specify whether that is in the user's home directory or not. I think apt on Linux Mint is somewhat similar to aptitude on Ubuntu but at present I don't have Ubuntu running on a VM to test it out. The user preference files are in /home/dennis/.gnucash for v 2.6. ( In V 3.1 they are located in /home/dennis/.local/share/gnucash - conversion is automatic on the first run of v3.1). If you rename the /home/dennis/.gnucash directory to /home/dennis/.old-gnucash before using the "sudo apt remove --purge gnucash" command and then rename them back to the original after having done that, you can avoid any possibility of deleting the preference files. The Ubuntu 16.04 distro appears to put its distribution version in /usr as the prefix rather than /usr/local. On Thu, 2018-05-10 at 16:02 -0400, Dennis Powless wrote: > I was able to use the remove feature in Ubuntu Software. however > after I ran that, I did the whereis gnucash and this is the output. > > dennis@dennis-XPS-8500:~$ whereis gnucash > gnucash: /etc/gnucash /usr/include/gnucash /usr/share/gnucash > > > I then did > sudo apt-get remove gnucash > > repeated whereis gnucash with same output. > > I don't have anything /gnucash in the lib directory > > Here is the output of the lib directory > > dennis@dennis-XPS-8500:/lib$ ls > apparmor klibc-k3La8MUnuzHQ0_kG8hokcGAC0PA.so recovery-mode > brltty ld-linux.so.2 resolvconf > cpp ld-lsb.so.1 systemd > crda ld-lsb.so.2 sysvinit > firmware ld-lsb.so.3 terminfo > hdparm linux-sound-base udev > i386-linux-gnu lsb ufw > ifupdown modprobe.d x86_64-linux- > gnu > init modules xtables > > > Output of the ls on i386-linux-gnu > > dennis@dennis-XPS-8500:/lib/i386-linux-gnu$ ls > ld-2.23.so libc-2.23.so libdl-2.23.so libnsl- > 2.23.so libnss_files-2.23.so libnss_nisplus.so.2 > libresolv.so.2 libutil-2.23.so > ld-linux.so.2 libcidn-2.23.so libdl.so.2 > libnsl.so.1 libnss_files.so.2 libnss_nis.so.2 > librt-2.23.so libutil.so.1 > libanl-2.23.so libcidn.so.1 libgcc_s.so.1 > libnss_compat-2.23.so libnss_hesiod-2.23.so libpcprofile.so > librt.so.1 libz.so.1 > libanl.so.1 libcrypt-2.23.so libm-2.23.so > libnss_compat.so.2 libnss_hesiod.so.2 libpthread-2.23.so > libSegFault.so libz.so.1.2.8 > libBrokenLocale-2.23.so libcrypt.so.1 libmemusage.so > libnss_dns-2.23.so libnss_nis-2.23.so libpthread.so.0 > libthread_db-1.0.so > libBrokenLocale.so.1 libc.so.6 libm.so.6 > libnss_dns.so.2 libnss_nisplus-2.23.so libresolv-2.23.so > libthread_db.so.1 > > > > I tried the dpkg optrion also > > dennis@dennis-XPS-8500:~$ sudo dpkg -r gnucash > dpkg: warning: ignoring request to remove gnucash, only the config > files of which are on the system; use --purge to remove them too > > > Thanks for the help. > > BTW, I can't find gnucash in unity. > > Dennis > > > > > > On Thu, May 10, 2018 at 10:56 AM, John Ralls> wrote: > > > > > > > On May 9, 2018, at 3:19 PM, DaveC49 > > wrote: > > > > > > Dennis > > > > > > It is probbaly a good idea to uninstall the previous build of > > 2.6.x before > > > upgrading. With the changes between 2.6 and 3.1 there may have > > been changes > > > in the libraries/library names such that some older libraries may > > not > > > necessarilybe overwritten. > > > > > > How to remove it will depend upon how you installed it and in > > which location > > > you installed it. If you built it from sources and you have > > retained the > > > source directory, try changing to the top level source directory > > or a build > > > directory if there is one in a terminal and then type > > > > > > make uninstall > > > > > > if it was installed under your home directory > > > > > > or sudo make uninstall > > > > > > if it was installed to a system directory like /usr/local or/opt. > > > > > > If you didn't retain the source directory and/or build directory > > then things > > > get a bit harder. One strategy would be to download the sources > > for that > > > version again. Follow the instructions for buidling that version > > apart from > > > the
Re: [GNC] Up grade from 2.6.xx to 3.1
Dennis, The instructions for v3.1 should work. The only problem I had when i compiled 2.6.21 after upgrading to 3.1 was that I had installed guile 2.2.3 and v 2.6.21 looks for guile-1.8 or guile-2.0. It is possible to have several versions of the guile libraries and headers installed as they install individually under a directory labelled with the version number in a directory labelled guile. I am having a problem running it however as I am getting an error related to being unable to override PYTHONPATH which I find a bit strange as I ran CMake with the -DWITH_PYTHON=OFF switch. I'll work that one out tomorrow. It is likely a library conflict as I am compiling it on the same machine I run 3.1 on. David - David Cousens -- Sent from: http://gnucash.1415818.n4.nabble.com/GnuCash-User-f1415819.html ___ gnucash-user mailing list gnucash-user@gnucash.org To update your subscription preferences or to unsubscribe: https://lists.gnucash.org/mailman/listinfo/gnucash-user If you are using Nabble or Gmane, please see https://wiki.gnucash.org/wiki/Mailing_Lists for more information. - Please remember to CC this list on all your replies. You can do this by using Reply-To-List or Reply-All.
Re: [GNC] Automated Reporting
I have some code https://github.com/EvansMike/pycash/tree/master/goods_invoice that I was experimenting with to print invoices. It uses the python bindings through GnuCash so should work with any backend, at least for invoices. It doesn't work (as is) anymore as MtGox no longer exists and the QR code part is just for BitCoin, but that basics of how to get information out of GnuCash and use a template to produce out may be be of use. Only tested in Linux. Mike E On Tue, 24 Apr 2018 04:56:47 + Justin Phelpswrote: > On Mon, Apr 23, 2018 at 9:15 PM Sébastien de Menten > wrote: > > > With some python skills, you could use piecash ( > > http://piecash.readthedocs.io/en/master/) to build you own reports and > > export them in the best format for your needs. > > We are working to support gnucash 3.0, the current version support gnucash > > 2.6. > > > > On Mon, Apr 23, 2018, 23:26 Justin Phelps wrote: > > > >> I'm hoping there's a command line method for generating reports from a > >> gnucash file. I want to script a series of daily, weekly, and monthly > >> reports that are automatically emailed to certain people. I can achieve > >> the > >> scheduling and emailing from my server, but having some way to get this > >> data out from gnucash without clicking through the interface would be > >> really useful. > >> > >> How would you approach this challenge? > >> > > ___ > >> gnucash-user mailing list > >> gnucash-user@gnucash.org > >> To update your subscription preferences or to unsubscribe: > >> https://lists.gnucash.org/mailman/listinfo/gnucash-user > >> If you are using Nabble or Gmane, please see > >> https://wiki.gnucash.org/wiki/Mailing_Lists for more information. > >> - > >> Please remember to CC this list on all your replies. > >> You can do this by using Reply-To-List or Reply-All. > >> > > > I certainly know more Python than Scheme at this point, so the piecash > tools seems promising. Does it support the XML style file, or just the SQL > based solutions? > ___ > gnucash-user mailing list > gnucash-user@gnucash.org > To update your subscription preferences or to unsubscribe: > https://lists.gnucash.org/mailman/listinfo/gnucash-user > If you are using Nabble or Gmane, please see > https://wiki.gnucash.org/wiki/Mailing_Lists for more information. > - > Please remember to CC this list on all your replies. > You can do this by using Reply-To-List or Reply-All. ___ gnucash-user mailing list gnucash-user@gnucash.org To update your subscription preferences or to unsubscribe: https://lists.gnucash.org/mailman/listinfo/gnucash-user If you are using Nabble or Gmane, please see https://wiki.gnucash.org/wiki/Mailing_Lists for more information. - Please remember to CC this list on all your replies. You can do this by using Reply-To-List or Reply-All.
Re: [GNC] Unable to select Drive to Save As
John Ralls-2 wrote >>> I'd go with a gdk-win32 bug. Window stacking ("z-order") models are >>> different for each windowing system. I've researched this further and it could well be a Windows issue. I am using Windows 10 Build version 17134. Released April 2018, mine upgraded this week. Was this happening before upgrade - I do not know. Keith - GnuCash 3.1 - Windows 10 -- Sent from: http://gnucash.1415818.n4.nabble.com/GnuCash-User-f1415819.html ___ gnucash-user mailing list gnucash-user@gnucash.org To update your subscription preferences or to unsubscribe: https://lists.gnucash.org/mailman/listinfo/gnucash-user If you are using Nabble or Gmane, please see https://wiki.gnucash.org/wiki/Mailing_Lists for more information. - Please remember to CC this list on all your replies. You can do this by using Reply-To-List or Reply-All.