Re: [leaf-user] Problems booting Bering-uClibc on APU2B4

[kp kirchdoerfer]

Am Donnerstag, 28. Januar 2016, 20:43:30 schrieb Sven Kirmess:
> I've created a fresh USB key from
> Bering-uClibc_5.2.4-rc1_x86_64_syslinux_serial115200.tar.gz and it boots
> without problem on my APU2B4.
> 
> Thanks!

Thanks for testing and feedback!

kp 


--
Site24x7 APM Insight: Get Deep Visibility into Application Performance
APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month
Monitor end-to-end web transactions and take corrective actions now
Troubleshoot faster and improve end-user experience. Signup Now!
http://pubads.g.doubleclick.net/gampad/clk?id=267308311=/4140

leaf-user mailing list: leaf-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/leaf-user
Support Request -- http://leaf-project.org/

Re: [leaf-user] Problems booting Bering-uClibc on APU2B4

[Sven Kirmess]

I've created a fresh USB key from
Bering-uClibc_5.2.4-rc1_x86_64_syslinux_serial115200.tar.gz and it boots
without problem on my APU2B4.

Thanks!

On Tue, Jan 19, 2016 at 8:44 AM, Sven Kirmess  wrote:

> I didn't check if all 4 are really needed. That are just the 4 I've added
> for the first test and that was enough to bring the system up.
>
> On Mon, Jan 18, 2016 at 8:29 PM, kp kirchdoerfer <
> kap...@users.sourceforge.net> wrote:
>
>> Hi Sven;
>>
>> Am Sonntag, 17. Januar 2016, 20:50:04 schrieb Sven Kirmess:
>> > That worked. Thanks for your help. :-)
>>
>> > I've added the following 4 modules to initmod.lrp:
>> > ehci-platform.ko.gz
>> > ohci-pci.ko.gz
>> > xhci-hcd.ko.gz
>> > xhci-pci.ko.gz
>>
>> Thx for your help.
>> The modules will be added into initmod.lrp for further releases.
>>
>> kp
>>
>> > And replaced the configdb.lrp with the one from
>> > Bering-uClibc_5.2.3_i686_syslinux_serial115200.tar.gz
>> >
>> >
>> >
>> > firewall# lsmod
>> > Tainted: G
>> > nf_log_ipv4 4149 1 - Live 0xa0665000
>> > nf_log_common 2954 1 nf_log_ipv4, Live 0xa0661000
>> > xt_LOG 1359 1 - Live 0xa065d000
>> > ipt_MASQUERADE 1085 1 - Live 0xa0659000
>> > nf_nat_masquerade_ipv4 1897 1 ipt_MASQUERADE, Live 0xa0655000
>> > xt_recent 8134 1 - Live 0xa064f000
>> > xt_comment 939 26 - Live 0xa064b000
>> > iptable_nat 1831 1 - Live 0xa0647000
>> > nf_nat_ipv4 4923 1 iptable_nat, Live 0xa0642000
>> > nf_nat 12330 2 nf_nat_masquerade_ipv4,nf_nat_ipv4, Live
>> 0xa0639000
>> > ipt_REJECT 1425 4 - Live 0xa0635000
>> > nf_reject_ipv4 2451 1 ipt_REJECT, Live 0xa0631000
>> > xt_addrtype 2765 4 - Live 0xa062d000
>> > xt_NFLOG 1134 6 - Live 0xa0629000
>> > xt_mark 1189 1 - Live 0xa0625000
>> > iptable_mangle 1528 1 - Live 0xa0621000
>> > nf_conntrack_irc 3755 2 - Live 0xa061d000
>> > nf_conntrack_sip 21125 2 - Live 0xa0613000
>> > nf_conntrack_h323 41970 4 - Live 0xa0601000
>> > nf_conntrack_tftp 3953 2 - Live 0xa05fd000
>> > nf_conntrack_sane 4220 2 - Live 0xa05f8000
>> > ts_kmp 1815 5 - Live 0xa05f4000
>> > nf_conntrack_amanda 2293 2 - Live 0xa05f
>> > nf_conntrack_ftp 6847 2 - Live 0xa05eb000
>> > nf_conntrack_netbios_ns 1053 2 - Live 0xa05e7000
>> > nf_conntrack_snmp 1187 2 - Live 0xa05e3000
>> > nf_conntrack_broadcast 1197 2 nf_conntrack_netbios_ns,nf_conntrack_snmp,
>> > Live 0xa05df000
>> > nf_conntrack_pptp 4274 2 - Live 0xa05da000
>> > nf_conntrack_proto_gre 4224 1 nf_conntrack_pptp, Live 0xa05d5000
>> > xt_tcpudp 2415 49 - Live 0xa05d1000
>> > xt_CT 4042 22 - Live 0xa05cd000
>> > iptable_raw 1356 1 - Live 0xa05c9000
>> > xt_multiport 1798 4 - Live 0xa05c5000
>> > nf_conntrack_ipv4 12920 35 - Live 0xa05bd000
>> > nf_defrag_ipv4 1507 1 nf_conntrack_ipv4, Live 0xa05b9000
>> > xt_conntrack 3081 12 - Live 0xa05b5000
>> > nf_conntrack 74514 18
>> >
>> nf_nat_masquerade_ipv4,nf_nat_ipv4,nf_nat,nf_conntrack_irc,nf_conntrack_sip,
>> >
>> nf_conntrack_h323,nf_conntrack_tftp,nf_conntrack_sane,nf_conntrack_amanda,nf
>> >
>> _conntrack_ftp,nf_conntrack_netbios_ns,nf_conntrack_snmp,nf_conntrack_broadc
>> >
>> ast,nf_conntrack_pptp,nf_conntrack_proto_gre,xt_CT,nf_conntrack_ipv4,xt_conn
>> > track, Live 0xa0595000
>> > iptable_filter 1464 1 - Live 0xa0591000
>> > ip_tables 16195 4 iptable_nat,iptable_mangle,iptable_raw,iptable_filter,
>> > Live 0xa0589000
>> > x_tables 15952 16
>> >
>> xt_LOG,ipt_MASQUERADE,xt_recent,xt_comment,ipt_REJECT,xt_addrtype,xt_NFLOG,x
>> >
>> t_mark,iptable_mangle,xt_tcpudp,xt_CT,iptable_raw,xt_multiport,xt_conntrack,
>> > iptable_filter,ip_tables, Live 0xa057f000
>> > nfnetlink_log 8113 3 xt_NFLOG, Live 0xa0579000
>> > nfnetlink 5616 3 nfnetlink_log, Live 0xa0573000
>> > ipv6 344164 24 [permanent], Live 0xa0506000
>> > sch_sfq 10357 0 - Live 0xa04e4000
>> > sch_htb 14936 0 - Live 0xa04dc000
>> > cls_u32 8229 0 - Live 0xa04d6000
>> > sch_ingress 1997 0 - Live 0xa04d2000
>> > sch_prio 4588 0 - Live 0xa04cd000
>> > sch_tbf 5907 0 - Live 0xa04c8000
>> > cls_flow 7131 0 - Live 0xa04c3000
>> > cls_fw 4315 0 - Live 0xa04be000
>> > act_police 3741 0 - Live 0xa04ba000
>> > ifb 3773 0 - Live 0xa04b6000
>> > 8021q 20186 0 - Live 0xa04ac000
>> > mrp 7550 1 8021q, Live 0xa04a6000
>> > garp 5757 1 8021q, Live 0xa04a
>> > stp 1597 1 garp, Live 0xa049c000
>> > llc 3633 2 garp,stp, Live 0xa0497000
>> > softdog 2365 1 - Live 0xa0493000
>> > acpi_cpufreq 6946 0 - Live 0xa03c3000
>> > processor 22864 1 acpi_cpufreq, Live 0xa039d000
>> > thermal_sys 25341 1 processor, Live 0xa0383000
>> > igb 168593 0 - Live 

Re: [leaf-user] Problems booting Bering-uClibc on APU2B4

[kp kirchdoerfer]

Hi Sven;

Am Sonntag, 17. Januar 2016, 20:50:04 schrieb Sven Kirmess:
> That worked. Thanks for your help. :-)

> I've added the following 4 modules to initmod.lrp:
> ehci-platform.ko.gz
> ohci-pci.ko.gz
> xhci-hcd.ko.gz
> xhci-pci.ko.gz

Thx for your help. 
The modules will be added into initmod.lrp for further releases.

kp

> And replaced the configdb.lrp with the one from
> Bering-uClibc_5.2.3_i686_syslinux_serial115200.tar.gz
> 
> 
> 
> firewall# lsmod
> Tainted: G
> nf_log_ipv4 4149 1 - Live 0xa0665000
> nf_log_common 2954 1 nf_log_ipv4, Live 0xa0661000
> xt_LOG 1359 1 - Live 0xa065d000
> ipt_MASQUERADE 1085 1 - Live 0xa0659000
> nf_nat_masquerade_ipv4 1897 1 ipt_MASQUERADE, Live 0xa0655000
> xt_recent 8134 1 - Live 0xa064f000
> xt_comment 939 26 - Live 0xa064b000
> iptable_nat 1831 1 - Live 0xa0647000
> nf_nat_ipv4 4923 1 iptable_nat, Live 0xa0642000
> nf_nat 12330 2 nf_nat_masquerade_ipv4,nf_nat_ipv4, Live 0xa0639000
> ipt_REJECT 1425 4 - Live 0xa0635000
> nf_reject_ipv4 2451 1 ipt_REJECT, Live 0xa0631000
> xt_addrtype 2765 4 - Live 0xa062d000
> xt_NFLOG 1134 6 - Live 0xa0629000
> xt_mark 1189 1 - Live 0xa0625000
> iptable_mangle 1528 1 - Live 0xa0621000
> nf_conntrack_irc 3755 2 - Live 0xa061d000
> nf_conntrack_sip 21125 2 - Live 0xa0613000
> nf_conntrack_h323 41970 4 - Live 0xa0601000
> nf_conntrack_tftp 3953 2 - Live 0xa05fd000
> nf_conntrack_sane 4220 2 - Live 0xa05f8000
> ts_kmp 1815 5 - Live 0xa05f4000
> nf_conntrack_amanda 2293 2 - Live 0xa05f
> nf_conntrack_ftp 6847 2 - Live 0xa05eb000
> nf_conntrack_netbios_ns 1053 2 - Live 0xa05e7000
> nf_conntrack_snmp 1187 2 - Live 0xa05e3000
> nf_conntrack_broadcast 1197 2 nf_conntrack_netbios_ns,nf_conntrack_snmp,
> Live 0xa05df000
> nf_conntrack_pptp 4274 2 - Live 0xa05da000
> nf_conntrack_proto_gre 4224 1 nf_conntrack_pptp, Live 0xa05d5000
> xt_tcpudp 2415 49 - Live 0xa05d1000
> xt_CT 4042 22 - Live 0xa05cd000
> iptable_raw 1356 1 - Live 0xa05c9000
> xt_multiport 1798 4 - Live 0xa05c5000
> nf_conntrack_ipv4 12920 35 - Live 0xa05bd000
> nf_defrag_ipv4 1507 1 nf_conntrack_ipv4, Live 0xa05b9000
> xt_conntrack 3081 12 - Live 0xa05b5000
> nf_conntrack 74514 18
> nf_nat_masquerade_ipv4,nf_nat_ipv4,nf_nat,nf_conntrack_irc,nf_conntrack_sip,
> nf_conntrack_h323,nf_conntrack_tftp,nf_conntrack_sane,nf_conntrack_amanda,nf
> _conntrack_ftp,nf_conntrack_netbios_ns,nf_conntrack_snmp,nf_conntrack_broadc
> ast,nf_conntrack_pptp,nf_conntrack_proto_gre,xt_CT,nf_conntrack_ipv4,xt_conn
> track, Live 0xa0595000
> iptable_filter 1464 1 - Live 0xa0591000
> ip_tables 16195 4 iptable_nat,iptable_mangle,iptable_raw,iptable_filter,
> Live 0xa0589000
> x_tables 15952 16
> xt_LOG,ipt_MASQUERADE,xt_recent,xt_comment,ipt_REJECT,xt_addrtype,xt_NFLOG,x
> t_mark,iptable_mangle,xt_tcpudp,xt_CT,iptable_raw,xt_multiport,xt_conntrack,
> iptable_filter,ip_tables, Live 0xa057f000
> nfnetlink_log 8113 3 xt_NFLOG, Live 0xa0579000
> nfnetlink 5616 3 nfnetlink_log, Live 0xa0573000
> ipv6 344164 24 [permanent], Live 0xa0506000
> sch_sfq 10357 0 - Live 0xa04e4000
> sch_htb 14936 0 - Live 0xa04dc000
> cls_u32 8229 0 - Live 0xa04d6000
> sch_ingress 1997 0 - Live 0xa04d2000
> sch_prio 4588 0 - Live 0xa04cd000
> sch_tbf 5907 0 - Live 0xa04c8000
> cls_flow 7131 0 - Live 0xa04c3000
> cls_fw 4315 0 - Live 0xa04be000
> act_police 3741 0 - Live 0xa04ba000
> ifb 3773 0 - Live 0xa04b6000
> 8021q 20186 0 - Live 0xa04ac000
> mrp 7550 1 8021q, Live 0xa04a6000
> garp 5757 1 8021q, Live 0xa04a
> stp 1597 1 garp, Live 0xa049c000
> llc 3633 2 garp,stp, Live 0xa0497000
> softdog 2365 1 - Live 0xa0493000
> acpi_cpufreq 6946 0 - Live 0xa03c3000
> processor 22864 1 acpi_cpufreq, Live 0xa039d000
> thermal_sys 25341 1 processor, Live 0xa0383000
> igb 168593 0 - Live 0xa02ed000 (O)
> fam15h_power 2606 0 - Live 0xa02e9000
> k10temp 2900 0 - Live 0xa02e5000
> i2c_piix4 8736 0 - Live 0xa02d5000
> hwmon 3122 4 thermal_sys,igb,fam15h_power,k10temp, Live 0xa02c6000
> i2c_core 36487 1 i2c_piix4, Live 0xa02b4000
> dca 5056 1 igb, Live 0xa02a2000
> ptp 10524 1 igb, Live 0xa0287000
> pps_core 6721 1 ptp, Live 0xa027b000
> sd_mod 31037 0 - Live 0xa0265000
> usb_storage 48532 0 - Live 0xa024f000
> pcspkr 1939 0 - Live 0xa024b000
> ahci 24883 0 - Live 0xa023d000
> libahci 21719 1 ahci, Live 0xa0231000
> libata 189900 2 ahci,libahci, Live 0xa01ea000
> xhci_pci 3747 0 - Live 0xa01e6000
> xhci_hcd 106902 1 

Re: [leaf-user] Problems booting Bering-uClibc on APU2B4

[Sven Kirmess]

I didn't check if all 4 are really needed. That are just the 4 I've added
for the first test and that was enough to bring the system up.

On Mon, Jan 18, 2016 at 8:29 PM, kp kirchdoerfer <
kap...@users.sourceforge.net> wrote:

> Hi Sven;
>
> Am Sonntag, 17. Januar 2016, 20:50:04 schrieb Sven Kirmess:
> > That worked. Thanks for your help. :-)
>
> > I've added the following 4 modules to initmod.lrp:
> > ehci-platform.ko.gz
> > ohci-pci.ko.gz
> > xhci-hcd.ko.gz
> > xhci-pci.ko.gz
>
> Thx for your help.
> The modules will be added into initmod.lrp for further releases.
>
> kp
>
> > And replaced the configdb.lrp with the one from
> > Bering-uClibc_5.2.3_i686_syslinux_serial115200.tar.gz
> >
> >
> >
> > firewall# lsmod
> > Tainted: G
> > nf_log_ipv4 4149 1 - Live 0xa0665000
> > nf_log_common 2954 1 nf_log_ipv4, Live 0xa0661000
> > xt_LOG 1359 1 - Live 0xa065d000
> > ipt_MASQUERADE 1085 1 - Live 0xa0659000
> > nf_nat_masquerade_ipv4 1897 1 ipt_MASQUERADE, Live 0xa0655000
> > xt_recent 8134 1 - Live 0xa064f000
> > xt_comment 939 26 - Live 0xa064b000
> > iptable_nat 1831 1 - Live 0xa0647000
> > nf_nat_ipv4 4923 1 iptable_nat, Live 0xa0642000
> > nf_nat 12330 2 nf_nat_masquerade_ipv4,nf_nat_ipv4, Live
> 0xa0639000
> > ipt_REJECT 1425 4 - Live 0xa0635000
> > nf_reject_ipv4 2451 1 ipt_REJECT, Live 0xa0631000
> > xt_addrtype 2765 4 - Live 0xa062d000
> > xt_NFLOG 1134 6 - Live 0xa0629000
> > xt_mark 1189 1 - Live 0xa0625000
> > iptable_mangle 1528 1 - Live 0xa0621000
> > nf_conntrack_irc 3755 2 - Live 0xa061d000
> > nf_conntrack_sip 21125 2 - Live 0xa0613000
> > nf_conntrack_h323 41970 4 - Live 0xa0601000
> > nf_conntrack_tftp 3953 2 - Live 0xa05fd000
> > nf_conntrack_sane 4220 2 - Live 0xa05f8000
> > ts_kmp 1815 5 - Live 0xa05f4000
> > nf_conntrack_amanda 2293 2 - Live 0xa05f
> > nf_conntrack_ftp 6847 2 - Live 0xa05eb000
> > nf_conntrack_netbios_ns 1053 2 - Live 0xa05e7000
> > nf_conntrack_snmp 1187 2 - Live 0xa05e3000
> > nf_conntrack_broadcast 1197 2 nf_conntrack_netbios_ns,nf_conntrack_snmp,
> > Live 0xa05df000
> > nf_conntrack_pptp 4274 2 - Live 0xa05da000
> > nf_conntrack_proto_gre 4224 1 nf_conntrack_pptp, Live 0xa05d5000
> > xt_tcpudp 2415 49 - Live 0xa05d1000
> > xt_CT 4042 22 - Live 0xa05cd000
> > iptable_raw 1356 1 - Live 0xa05c9000
> > xt_multiport 1798 4 - Live 0xa05c5000
> > nf_conntrack_ipv4 12920 35 - Live 0xa05bd000
> > nf_defrag_ipv4 1507 1 nf_conntrack_ipv4, Live 0xa05b9000
> > xt_conntrack 3081 12 - Live 0xa05b5000
> > nf_conntrack 74514 18
> >
> nf_nat_masquerade_ipv4,nf_nat_ipv4,nf_nat,nf_conntrack_irc,nf_conntrack_sip,
> >
> nf_conntrack_h323,nf_conntrack_tftp,nf_conntrack_sane,nf_conntrack_amanda,nf
> >
> _conntrack_ftp,nf_conntrack_netbios_ns,nf_conntrack_snmp,nf_conntrack_broadc
> >
> ast,nf_conntrack_pptp,nf_conntrack_proto_gre,xt_CT,nf_conntrack_ipv4,xt_conn
> > track, Live 0xa0595000
> > iptable_filter 1464 1 - Live 0xa0591000
> > ip_tables 16195 4 iptable_nat,iptable_mangle,iptable_raw,iptable_filter,
> > Live 0xa0589000
> > x_tables 15952 16
> >
> xt_LOG,ipt_MASQUERADE,xt_recent,xt_comment,ipt_REJECT,xt_addrtype,xt_NFLOG,x
> >
> t_mark,iptable_mangle,xt_tcpudp,xt_CT,iptable_raw,xt_multiport,xt_conntrack,
> > iptable_filter,ip_tables, Live 0xa057f000
> > nfnetlink_log 8113 3 xt_NFLOG, Live 0xa0579000
> > nfnetlink 5616 3 nfnetlink_log, Live 0xa0573000
> > ipv6 344164 24 [permanent], Live 0xa0506000
> > sch_sfq 10357 0 - Live 0xa04e4000
> > sch_htb 14936 0 - Live 0xa04dc000
> > cls_u32 8229 0 - Live 0xa04d6000
> > sch_ingress 1997 0 - Live 0xa04d2000
> > sch_prio 4588 0 - Live 0xa04cd000
> > sch_tbf 5907 0 - Live 0xa04c8000
> > cls_flow 7131 0 - Live 0xa04c3000
> > cls_fw 4315 0 - Live 0xa04be000
> > act_police 3741 0 - Live 0xa04ba000
> > ifb 3773 0 - Live 0xa04b6000
> > 8021q 20186 0 - Live 0xa04ac000
> > mrp 7550 1 8021q, Live 0xa04a6000
> > garp 5757 1 8021q, Live 0xa04a
> > stp 1597 1 garp, Live 0xa049c000
> > llc 3633 2 garp,stp, Live 0xa0497000
> > softdog 2365 1 - Live 0xa0493000
> > acpi_cpufreq 6946 0 - Live 0xa03c3000
> > processor 22864 1 acpi_cpufreq, Live 0xa039d000
> > thermal_sys 25341 1 processor, Live 0xa0383000
> > igb 168593 0 - Live 0xa02ed000 (O)
> > fam15h_power 2606 0 - Live 0xa02e9000
> > k10temp 2900 0 - Live 0xa02e5000
> > i2c_piix4 8736 0 - Live 0xa02d5000
> > hwmon 3122 4 thermal_sys,igb,fam15h_power,k10temp, Live
> 0xa02c6000
> > i2c_core 36487 1 i2c_piix4, Live 0xa02b4000
> > dca 5056 1 igb, Live 

Re: [leaf-user] Problems booting Bering-uClibc on APU2B4

[Sven Kirmess]

That worked. Thanks for your help. :-)

I've added the following 4 modules to initmod.lrp:
ehci-platform.ko.gz
ohci-pci.ko.gz
xhci-hcd.ko.gz
xhci-pci.ko.gz

And replaced the configdb.lrp with the one from
Bering-uClibc_5.2.3_i686_syslinux_serial115200.tar.gz



firewall# lsmod
Tainted: G
nf_log_ipv4 4149 1 - Live 0xa0665000
nf_log_common 2954 1 nf_log_ipv4, Live 0xa0661000
xt_LOG 1359 1 - Live 0xa065d000
ipt_MASQUERADE 1085 1 - Live 0xa0659000
nf_nat_masquerade_ipv4 1897 1 ipt_MASQUERADE, Live 0xa0655000
xt_recent 8134 1 - Live 0xa064f000
xt_comment 939 26 - Live 0xa064b000
iptable_nat 1831 1 - Live 0xa0647000
nf_nat_ipv4 4923 1 iptable_nat, Live 0xa0642000
nf_nat 12330 2 nf_nat_masquerade_ipv4,nf_nat_ipv4, Live 0xa0639000
ipt_REJECT 1425 4 - Live 0xa0635000
nf_reject_ipv4 2451 1 ipt_REJECT, Live 0xa0631000
xt_addrtype 2765 4 - Live 0xa062d000
xt_NFLOG 1134 6 - Live 0xa0629000
xt_mark 1189 1 - Live 0xa0625000
iptable_mangle 1528 1 - Live 0xa0621000
nf_conntrack_irc 3755 2 - Live 0xa061d000
nf_conntrack_sip 21125 2 - Live 0xa0613000
nf_conntrack_h323 41970 4 - Live 0xa0601000
nf_conntrack_tftp 3953 2 - Live 0xa05fd000
nf_conntrack_sane 4220 2 - Live 0xa05f8000
ts_kmp 1815 5 - Live 0xa05f4000
nf_conntrack_amanda 2293 2 - Live 0xa05f
nf_conntrack_ftp 6847 2 - Live 0xa05eb000
nf_conntrack_netbios_ns 1053 2 - Live 0xa05e7000
nf_conntrack_snmp 1187 2 - Live 0xa05e3000
nf_conntrack_broadcast 1197 2 nf_conntrack_netbios_ns,nf_conntrack_snmp,
Live 0xa05df000
nf_conntrack_pptp 4274 2 - Live 0xa05da000
nf_conntrack_proto_gre 4224 1 nf_conntrack_pptp, Live 0xa05d5000
xt_tcpudp 2415 49 - Live 0xa05d1000
xt_CT 4042 22 - Live 0xa05cd000
iptable_raw 1356 1 - Live 0xa05c9000
xt_multiport 1798 4 - Live 0xa05c5000
nf_conntrack_ipv4 12920 35 - Live 0xa05bd000
nf_defrag_ipv4 1507 1 nf_conntrack_ipv4, Live 0xa05b9000
xt_conntrack 3081 12 - Live 0xa05b5000
nf_conntrack 74514 18
nf_nat_masquerade_ipv4,nf_nat_ipv4,nf_nat,nf_conntrack_irc,nf_conntrack_sip,nf_conntrack_h323,nf_conntrack_tftp,nf_conntrack_sane,nf_conntrack_amanda,nf_conntrack_ftp,nf_conntrack_netbios_ns,nf_conntrack_snmp,nf_conntrack_broadcast,nf_conntrack_pptp,nf_conntrack_proto_gre,xt_CT,nf_conntrack_ipv4,xt_conntrack,
Live 0xa0595000
iptable_filter 1464 1 - Live 0xa0591000
ip_tables 16195 4 iptable_nat,iptable_mangle,iptable_raw,iptable_filter,
Live 0xa0589000
x_tables 15952 16
xt_LOG,ipt_MASQUERADE,xt_recent,xt_comment,ipt_REJECT,xt_addrtype,xt_NFLOG,xt_mark,iptable_mangle,xt_tcpudp,xt_CT,iptable_raw,xt_multiport,xt_conntrack,iptable_filter,ip_tables,
Live 0xa057f000
nfnetlink_log 8113 3 xt_NFLOG, Live 0xa0579000
nfnetlink 5616 3 nfnetlink_log, Live 0xa0573000
ipv6 344164 24 [permanent], Live 0xa0506000
sch_sfq 10357 0 - Live 0xa04e4000
sch_htb 14936 0 - Live 0xa04dc000
cls_u32 8229 0 - Live 0xa04d6000
sch_ingress 1997 0 - Live 0xa04d2000
sch_prio 4588 0 - Live 0xa04cd000
sch_tbf 5907 0 - Live 0xa04c8000
cls_flow 7131 0 - Live 0xa04c3000
cls_fw 4315 0 - Live 0xa04be000
act_police 3741 0 - Live 0xa04ba000
ifb 3773 0 - Live 0xa04b6000
8021q 20186 0 - Live 0xa04ac000
mrp 7550 1 8021q, Live 0xa04a6000
garp 5757 1 8021q, Live 0xa04a
stp 1597 1 garp, Live 0xa049c000
llc 3633 2 garp,stp, Live 0xa0497000
softdog 2365 1 - Live 0xa0493000
acpi_cpufreq 6946 0 - Live 0xa03c3000
processor 22864 1 acpi_cpufreq, Live 0xa039d000
thermal_sys 25341 1 processor, Live 0xa0383000
igb 168593 0 - Live 0xa02ed000 (O)
fam15h_power 2606 0 - Live 0xa02e9000
k10temp 2900 0 - Live 0xa02e5000
i2c_piix4 8736 0 - Live 0xa02d5000
hwmon 3122 4 thermal_sys,igb,fam15h_power,k10temp, Live 0xa02c6000
i2c_core 36487 1 i2c_piix4, Live 0xa02b4000
dca 5056 1 igb, Live 0xa02a2000
ptp 10524 1 igb, Live 0xa0287000
pps_core 6721 1 ptp, Live 0xa027b000
sd_mod 31037 0 - Live 0xa0265000
usb_storage 48532 0 - Live 0xa024f000
pcspkr 1939 0 - Live 0xa024b000
ahci 24883 0 - Live 0xa023d000
libahci 21719 1 ahci, Live 0xa0231000
libata 189900 2 ahci,libahci, Live 0xa01ea000
xhci_pci 3747 0 - Live 0xa01e6000
xhci_hcd 106902 1 xhci_pci, Live 0xa01c3000
ehci_pci 3839 0 - Live 0xa01bf000
ehci_hcd 43239 1 ehci_pci, Live 0xa01af000
usbcore 165765 5 usb_storage,xhci_pci,xhci_hcd,ehci_pci,ehci_hcd, Live
0xa0137000
scsi_mod 183845 3 sd_mod,usb_storage,libata, Live 0xa00f6000
usb_common 1624 1 usbcore, Live 0xa00ee000
ext4 502100 0 - Live 

Re: [leaf-user] Problems booting Bering-uClibc on APU2B4

[kp kirchdoerfer]

Am Sonntag, 17. Januar 2016, 18:44:08 schrieb Sven Kirmess:
> Where would I find the modules.tgz file with the additional modules? The
> documentation <
> http://bering-uclibc.zetam.org/wiki/Bering-uClibc_5.x_-_User_Guide_-_Advance
> d_Topics_-_Modifying_initrd.lrp> mentions
> 
> > modules.tgz (which can be found alongside initmod.lrp on any Bering-uClibc
> 
> 5.x  disk Image)
> 
> but I can't find a modules.tgz file, neither in the
> Bering-uClibc_5.2.3_x86_64_isolinux_vga.iso nor in the
> Bering-uClibc_5.2.3_x86_64_syslinux_vga.tar.gz distribution.

The modules tarball has been replaced with squashfs'd modules.

Look for modules(*).sqfs instead.

Mount with  

mount -t squashfs [path]modules-*.sqfs [tempdir]

The xhci drivers are in
[tmpdir]kernel/drivers/usb/host/


kp

> On Sun, Jan 17, 2016 at 6:28 PM, Andrew  wrote:
> > It seems like there's no USB 3.0 driver into initmod. Your board uses
> > usb 3.0 on front and also has usb 2.0 inside.
> > 
> > You may try to add XHCI driver to initmod (it's .cpio.gz package), or
> > try to connect flash to internal USB.
> > 
> > 17.01.2016 18:02, Sven Kirmess пишет:
> > > I've created a USB stick from
> > > Bering-uClibc_5.2.3_x86_64_syslinux_vga.tar.gz which boots fine on a
> > 
> > normal
> > 
> > > PC (after adding about 200 .c32 files :-). (Looks like I did create the
> > > sticks correctly.)
> > > 
> > > I then changed the syslinux.cfg to use the serial console on this stick
> > 
> > and
> > 
> > > booted it with my APU2B4. This time it does boot and I get the following
> > > error message:
> > > 
> > > modprobe: can't load module pata_legacy (pata_legacy.ko.gz): No such
> > 
> > device
> > 
> > > LINUXRC: PKGPATH is empty or unset. Can not install packages.
> > > LINUXRC: LRP= is empty or unset.  Can not install packages.
> > > Running stage2 depmod after loading: moddb
> > > LINUXRC: Running stage2 module loading
> > > LINUXRC: Loaded Packages
> > > can't run '/etc/init.d/rcS': No such file or directory
> > > 
> > > That looks very similar to e.g. this problem: <
> > 
> > http://sourceforge.net/p/leaf/mailman/leaf-user/thread/c69-54172880-51-36d
> > 68b00%405585321/#msg32833837> 
> > > There is no /dev/sda1 device after booting. The following modules are
> > > loaded:
> > > 
> > > / # lsmod
> > > 
> > >  Not tainted
> > > 
> > > ahci 24883 0 - Live 0xa01da000
> > > libahci 21719 1 ahci, Live 0xa01ce000
> > > pcspkr 1939 0 - Live 0xa01ca000
> > > ehci_pci 3839 0 - Live 0xa01c6000
> > > ehci_hcd 43239 1 ehci_pci, Live 0xa01b6000
> > > libata 189900 2 ahci,libahci, Live 0xa016f000
> > > scsi_mod 183845 1 libata, Live 0xa012e000
> > > usbcore 165765 2 ehci_pci,ehci_hcd, Live 0xa00f2000
> > > usb_common 1624 1 usbcore, Live 0xa00ee000
> > > ext4 502100 0 - Live 0xa004d000
> > > mbcache 7051 1 ext4, Live 0xa0047000
> > > jbd2 78193 1 ext4, Live 0xa0027000
> > > crc16 1335 1 ext4, Live 0xa0023000
> > > vfat 9967 0 - Live 0xa001d000
> > > fat 51912 1 vfat, Live 0xa000a000
> > > isofs 23779 0 - Live 0xa000
> > > / #


--
Site24x7 APM Insight: Get Deep Visibility into Application Performance
APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month
Monitor end-to-end web transactions and take corrective actions now
Troubleshoot faster and improve end-user experience. Signup Now!
http://pubads.g.doubleclick.net/gampad/clk?id=267308311=/4140

leaf-user mailing list: leaf-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/leaf-user
Support Request -- http://leaf-project.org/

Re: [leaf-user] Problems booting Bering-uClibc on APU2B4

[Andrew]

Now modules are in modules.sqfs. Just mount it somewhere, and copy xhci 
(+ it's deps) to your dir.

17.01.2016 19:44, Sven Kirmess пишет:
> Where would I find the modules.tgz file with the additional modules? The
> documentation <
> http://bering-uclibc.zetam.org/wiki/Bering-uClibc_5.x_-_User_Guide_-_Advanced_Topics_-_Modifying_initrd.lrp>
> mentions
>
>> modules.tgz (which can be found alongside initmod.lrp on any Bering-uClibc
> 5.x  disk Image)
>
> but I can't find a modules.tgz file, neither in the
> Bering-uClibc_5.2.3_x86_64_isolinux_vga.iso nor in the
> Bering-uClibc_5.2.3_x86_64_syslinux_vga.tar.gz distribution.
>
> On Sun, Jan 17, 2016 at 6:28 PM, Andrew  wrote:
>
>> It seems like there's no USB 3.0 driver into initmod. Your board uses
>> usb 3.0 on front and also has usb 2.0 inside.
>>
>> You may try to add XHCI driver to initmod (it's .cpio.gz package), or
>> try to connect flash to internal USB.
>>
>> 17.01.2016 18:02, Sven Kirmess пишет:
>>> I've created a USB stick from
>>> Bering-uClibc_5.2.3_x86_64_syslinux_vga.tar.gz which boots fine on a
>> normal
>>> PC (after adding about 200 .c32 files :-). (Looks like I did create the
>>> sticks correctly.)
>>>
>>> I then changed the syslinux.cfg to use the serial console on this stick
>> and
>>> booted it with my APU2B4. This time it does boot and I get the following
>>> error message:
>>>
>>> modprobe: can't load module pata_legacy (pata_legacy.ko.gz): No such
>> device
>>> LINUXRC: PKGPATH is empty or unset. Can not install packages.
>>> LINUXRC: LRP= is empty or unset.  Can not install packages.
>>> Running stage2 depmod after loading: moddb
>>> LINUXRC: Running stage2 module loading
>>> LINUXRC: Loaded Packages
>>> can't run '/etc/init.d/rcS': No such file or directory
>>>
>>> That looks very similar to e.g. this problem: <
>>>
>> http://sourceforge.net/p/leaf/mailman/leaf-user/thread/c69-54172880-51-36d68b00%405585321/#msg32833837
>>> There is no /dev/sda1 device after booting. The following modules are
>>> loaded:
>>>
>>> / # lsmod
>>>   Not tainted
>>> ahci 24883 0 - Live 0xa01da000
>>> libahci 21719 1 ahci, Live 0xa01ce000
>>> pcspkr 1939 0 - Live 0xa01ca000
>>> ehci_pci 3839 0 - Live 0xa01c6000
>>> ehci_hcd 43239 1 ehci_pci, Live 0xa01b6000
>>> libata 189900 2 ahci,libahci, Live 0xa016f000
>>> scsi_mod 183845 1 libata, Live 0xa012e000
>>> usbcore 165765 2 ehci_pci,ehci_hcd, Live 0xa00f2000
>>> usb_common 1624 1 usbcore, Live 0xa00ee000
>>> ext4 502100 0 - Live 0xa004d000
>>> mbcache 7051 1 ext4, Live 0xa0047000
>>> jbd2 78193 1 ext4, Live 0xa0027000
>>> crc16 1335 1 ext4, Live 0xa0023000
>>> vfat 9967 0 - Live 0xa001d000
>>> fat 51912 1 vfat, Live 0xa000a000
>>> isofs 23779 0 - Live 0xa000
>>> / #
>>>
>>>
>>>
>> --
>>> Site24x7 APM Insight: Get Deep Visibility into Application Performance
>>> APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month
>>> Monitor end-to-end web transactions and take corrective actions now
>>> Troubleshoot faster and improve end-user experience. Signup Now!
>>> http://pubads.g.doubleclick.net/gampad/clk?id=267308311=/4140
>>>
>>>
>>> 
>>> leaf-user mailing list: leaf-user@lists.sourceforge.net
>>> https://lists.sourceforge.net/lists/listinfo/leaf-user
>>> Support Request -- http://leaf-project.org/
>>
>> --
>> Site24x7 APM Insight: Get Deep Visibility into Application Performance
>> APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month
>> Monitor end-to-end web transactions and take corrective actions now
>> Troubleshoot faster and improve end-user experience. Signup Now!
>> http://pubads.g.doubleclick.net/gampad/clk?id=267308311=/4140
>> 
>> leaf-user mailing list: leaf-user@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/leaf-user
>> Support Request -- http://leaf-project.org/
>>
> --
> Site24x7 APM Insight: Get Deep Visibility into Application Performance
> APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month
> Monitor end-to-end web transactions and take corrective actions now
> Troubleshoot faster and improve end-user experience. Signup Now!
> http://pubads.g.doubleclick.net/gampad/clk?id=267308311=/4140
> 
> leaf-user mailing list: leaf-user@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/leaf-user
> Support Request -- http://leaf-project.org/

Re: [leaf-user] Problems booting Bering-uClibc on APU2B4

[Sven Kirmess]

I've created a USB stick from
Bering-uClibc_5.2.3_x86_64_syslinux_vga.tar.gz which boots fine on a normal
PC (after adding about 200 .c32 files :-). (Looks like I did create the
sticks correctly.)

I then changed the syslinux.cfg to use the serial console on this stick and
booted it with my APU2B4. This time it does boot and I get the following
error message:

modprobe: can't load module pata_legacy (pata_legacy.ko.gz): No such device
LINUXRC: PKGPATH is empty or unset. Can not install packages.
LINUXRC: LRP= is empty or unset.  Can not install packages.
Running stage2 depmod after loading: moddb
LINUXRC: Running stage2 module loading
LINUXRC: Loaded Packages
can't run '/etc/init.d/rcS': No such file or directory

That looks very similar to e.g. this problem: <
http://sourceforge.net/p/leaf/mailman/leaf-user/thread/c69-54172880-51-36d68b00%405585321/#msg32833837
>

There is no /dev/sda1 device after booting. The following modules are
loaded:

/ # lsmod
Not tainted
ahci 24883 0 - Live 0xa01da000
libahci 21719 1 ahci, Live 0xa01ce000
pcspkr 1939 0 - Live 0xa01ca000
ehci_pci 3839 0 - Live 0xa01c6000
ehci_hcd 43239 1 ehci_pci, Live 0xa01b6000
libata 189900 2 ahci,libahci, Live 0xa016f000
scsi_mod 183845 1 libata, Live 0xa012e000
usbcore 165765 2 ehci_pci,ehci_hcd, Live 0xa00f2000
usb_common 1624 1 usbcore, Live 0xa00ee000
ext4 502100 0 - Live 0xa004d000
mbcache 7051 1 ext4, Live 0xa0047000
jbd2 78193 1 ext4, Live 0xa0027000
crc16 1335 1 ext4, Live 0xa0023000
vfat 9967 0 - Live 0xa001d000
fat 51912 1 vfat, Live 0xa000a000
isofs 23779 0 - Live 0xa000
/ #
--
Site24x7 APM Insight: Get Deep Visibility into Application Performance
APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month
Monitor end-to-end web transactions and take corrective actions now
Troubleshoot faster and improve end-user experience. Signup Now!
http://pubads.g.doubleclick.net/gampad/clk?id=267308311=/4140
leaf-user mailing list: leaf-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/leaf-user
Support Request -- http://leaf-project.org/

Re: [leaf-user] Problems booting Bering-uClibc on APU2B4

[kp kirchdoerfer]

Hi Sven;

I'll expect  an APU2 next week and will give it a try ASAP.

In the meantime I'll  take care to build a X86_64 serial image for upcoming 
versions.

The failure you see, looks like a missing module during boot...

hopefully I'll have more info once I'll have an APU2 myself

kp


Am Sonntag, 17. Januar 2016, 17:02:01 schrieb Sven Kirmess:
> I've created a USB stick from
> Bering-uClibc_5.2.3_x86_64_syslinux_vga.tar.gz which boots fine on a normal
> PC (after adding about 200 .c32 files :-). (Looks like I did create the
> sticks correctly.)
> 
> I then changed the syslinux.cfg to use the serial console on this stick and
> booted it with my APU2B4. This time it does boot and I get the following
> error message:
> 
> modprobe: can't load module pata_legacy (pata_legacy.ko.gz): No such device
> LINUXRC: PKGPATH is empty or unset. Can not install packages.
> LINUXRC: LRP= is empty or unset.  Can not install packages.
> Running stage2 depmod after loading: moddb
> LINUXRC: Running stage2 module loading
> LINUXRC: Loaded Packages
> can't run '/etc/init.d/rcS': No such file or directory
> 
> That looks very similar to e.g. this problem: <
> http://sourceforge.net/p/leaf/mailman/leaf-user/thread/c69-54172880-51-36d68
> b00%405585321/#msg32833837
> 
> 
> There is no /dev/sda1 device after booting. The following modules are
> loaded:
> 
> / # lsmod
> Not tainted
> ahci 24883 0 - Live 0xa01da000
> libahci 21719 1 ahci, Live 0xa01ce000
> pcspkr 1939 0 - Live 0xa01ca000
> ehci_pci 3839 0 - Live 0xa01c6000
> ehci_hcd 43239 1 ehci_pci, Live 0xa01b6000
> libata 189900 2 ahci,libahci, Live 0xa016f000
> scsi_mod 183845 1 libata, Live 0xa012e000
> usbcore 165765 2 ehci_pci,ehci_hcd, Live 0xa00f2000
> usb_common 1624 1 usbcore, Live 0xa00ee000
> ext4 502100 0 - Live 0xa004d000
> mbcache 7051 1 ext4, Live 0xa0047000
> jbd2 78193 1 ext4, Live 0xa0027000
> crc16 1335 1 ext4, Live 0xa0023000
> vfat 9967 0 - Live 0xa001d000
> fat 51912 1 vfat, Live 0xa000a000
> isofs 23779 0 - Live 0xa000
> / #


--
Site24x7 APM Insight: Get Deep Visibility into Application Performance
APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month
Monitor end-to-end web transactions and take corrective actions now
Troubleshoot faster and improve end-user experience. Signup Now!
http://pubads.g.doubleclick.net/gampad/clk?id=267308311=/4140

leaf-user mailing list: leaf-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/leaf-user
Support Request -- http://leaf-project.org/

Re: [leaf-user] Problems booting Bering-uClibc on APU2B4

[Andrew]

It seems like there's no USB 3.0 driver into initmod. Your board uses 
usb 3.0 on front and also has usb 2.0 inside.

You may try to add XHCI driver to initmod (it's .cpio.gz package), or 
try to connect flash to internal USB.

17.01.2016 18:02, Sven Kirmess пишет:
> I've created a USB stick from
> Bering-uClibc_5.2.3_x86_64_syslinux_vga.tar.gz which boots fine on a normal
> PC (after adding about 200 .c32 files :-). (Looks like I did create the
> sticks correctly.)
>
> I then changed the syslinux.cfg to use the serial console on this stick and
> booted it with my APU2B4. This time it does boot and I get the following
> error message:
>
> modprobe: can't load module pata_legacy (pata_legacy.ko.gz): No such device
> LINUXRC: PKGPATH is empty or unset. Can not install packages.
> LINUXRC: LRP= is empty or unset.  Can not install packages.
> Running stage2 depmod after loading: moddb
> LINUXRC: Running stage2 module loading
> LINUXRC: Loaded Packages
> can't run '/etc/init.d/rcS': No such file or directory
>
> That looks very similar to e.g. this problem: <
> http://sourceforge.net/p/leaf/mailman/leaf-user/thread/c69-54172880-51-36d68b00%405585321/#msg32833837
> There is no /dev/sda1 device after booting. The following modules are
> loaded:
>
> / # lsmod
>  Not tainted
> ahci 24883 0 - Live 0xa01da000
> libahci 21719 1 ahci, Live 0xa01ce000
> pcspkr 1939 0 - Live 0xa01ca000
> ehci_pci 3839 0 - Live 0xa01c6000
> ehci_hcd 43239 1 ehci_pci, Live 0xa01b6000
> libata 189900 2 ahci,libahci, Live 0xa016f000
> scsi_mod 183845 1 libata, Live 0xa012e000
> usbcore 165765 2 ehci_pci,ehci_hcd, Live 0xa00f2000
> usb_common 1624 1 usbcore, Live 0xa00ee000
> ext4 502100 0 - Live 0xa004d000
> mbcache 7051 1 ext4, Live 0xa0047000
> jbd2 78193 1 ext4, Live 0xa0027000
> crc16 1335 1 ext4, Live 0xa0023000
> vfat 9967 0 - Live 0xa001d000
> fat 51912 1 vfat, Live 0xa000a000
> isofs 23779 0 - Live 0xa000
> / #
>
>
> --
> Site24x7 APM Insight: Get Deep Visibility into Application Performance
> APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month
> Monitor end-to-end web transactions and take corrective actions now
> Troubleshoot faster and improve end-user experience. Signup Now!
> http://pubads.g.doubleclick.net/gampad/clk?id=267308311=/4140
>
>
> 
> leaf-user mailing list: leaf-user@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/leaf-user
> Support Request -- http://leaf-project.org/

--
Site24x7 APM Insight: Get Deep Visibility into Application Performance
APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month
Monitor end-to-end web transactions and take corrective actions now
Troubleshoot faster and improve end-user experience. Signup Now!
http://pubads.g.doubleclick.net/gampad/clk?id=267308311=/4140

leaf-user mailing list: leaf-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/leaf-user
Support Request -- http://leaf-project.org/

Re: [leaf-user] Problems booting Bering-uClibc on APU2B4

[Sven Kirmess]

Where would I find the modules.tgz file with the additional modules? The
documentation <
http://bering-uclibc.zetam.org/wiki/Bering-uClibc_5.x_-_User_Guide_-_Advanced_Topics_-_Modifying_initrd.lrp>
mentions

> modules.tgz (which can be found alongside initmod.lrp on any Bering-uClibc
5.x  disk Image)

but I can't find a modules.tgz file, neither in the
Bering-uClibc_5.2.3_x86_64_isolinux_vga.iso nor in the
Bering-uClibc_5.2.3_x86_64_syslinux_vga.tar.gz distribution.

On Sun, Jan 17, 2016 at 6:28 PM, Andrew  wrote:

> It seems like there's no USB 3.0 driver into initmod. Your board uses
> usb 3.0 on front and also has usb 2.0 inside.
>
> You may try to add XHCI driver to initmod (it's .cpio.gz package), or
> try to connect flash to internal USB.
>
> 17.01.2016 18:02, Sven Kirmess пишет:
> > I've created a USB stick from
> > Bering-uClibc_5.2.3_x86_64_syslinux_vga.tar.gz which boots fine on a
> normal
> > PC (after adding about 200 .c32 files :-). (Looks like I did create the
> > sticks correctly.)
> >
> > I then changed the syslinux.cfg to use the serial console on this stick
> and
> > booted it with my APU2B4. This time it does boot and I get the following
> > error message:
> >
> > modprobe: can't load module pata_legacy (pata_legacy.ko.gz): No such
> device
> > LINUXRC: PKGPATH is empty or unset. Can not install packages.
> > LINUXRC: LRP= is empty or unset.  Can not install packages.
> > Running stage2 depmod after loading: moddb
> > LINUXRC: Running stage2 module loading
> > LINUXRC: Loaded Packages
> > can't run '/etc/init.d/rcS': No such file or directory
> >
> > That looks very similar to e.g. this problem: <
> >
> http://sourceforge.net/p/leaf/mailman/leaf-user/thread/c69-54172880-51-36d68b00%405585321/#msg32833837
> > There is no /dev/sda1 device after booting. The following modules are
> > loaded:
> >
> > / # lsmod
> >  Not tainted
> > ahci 24883 0 - Live 0xa01da000
> > libahci 21719 1 ahci, Live 0xa01ce000
> > pcspkr 1939 0 - Live 0xa01ca000
> > ehci_pci 3839 0 - Live 0xa01c6000
> > ehci_hcd 43239 1 ehci_pci, Live 0xa01b6000
> > libata 189900 2 ahci,libahci, Live 0xa016f000
> > scsi_mod 183845 1 libata, Live 0xa012e000
> > usbcore 165765 2 ehci_pci,ehci_hcd, Live 0xa00f2000
> > usb_common 1624 1 usbcore, Live 0xa00ee000
> > ext4 502100 0 - Live 0xa004d000
> > mbcache 7051 1 ext4, Live 0xa0047000
> > jbd2 78193 1 ext4, Live 0xa0027000
> > crc16 1335 1 ext4, Live 0xa0023000
> > vfat 9967 0 - Live 0xa001d000
> > fat 51912 1 vfat, Live 0xa000a000
> > isofs 23779 0 - Live 0xa000
> > / #
> >
> >
> >
> --
> > Site24x7 APM Insight: Get Deep Visibility into Application Performance
> > APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month
> > Monitor end-to-end web transactions and take corrective actions now
> > Troubleshoot faster and improve end-user experience. Signup Now!
> > http://pubads.g.doubleclick.net/gampad/clk?id=267308311=/4140
> >
> >
> > 
> > leaf-user mailing list: leaf-user@lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/leaf-user
> > Support Request -- http://leaf-project.org/
>
>
> --
> Site24x7 APM Insight: Get Deep Visibility into Application Performance
> APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month
> Monitor end-to-end web transactions and take corrective actions now
> Troubleshoot faster and improve end-user experience. Signup Now!
> http://pubads.g.doubleclick.net/gampad/clk?id=267308311=/4140
> 
> leaf-user mailing list: leaf-user@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/leaf-user
> Support Request -- http://leaf-project.org/
>
--
Site24x7 APM Insight: Get Deep Visibility into Application Performance
APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month
Monitor end-to-end web transactions and take corrective actions now
Troubleshoot faster and improve end-user experience. Signup Now!
http://pubads.g.doubleclick.net/gampad/clk?id=267308311=/4140

leaf-user mailing list: leaf-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/leaf-user
Support Request -- http://leaf-project.org/

Re: [leaf-user] Problems booting Bering-uClibc on APU2B4

[Sven Kirmess]

I didn't try the x86_64 first because there's no serial version of it. I've
created a stick from Bering-uClibc_5.2.3_x86_64_syslinux_vga.tar.gz and
replaced the /syslinux/syslinux.cfg file with the one from
Bering-uClibc_5.2.3_i686_syslinux_serial115200.tar.gz. And I removed the
quiet kernel option.

> SERIAL 0 115200
> DISPLAY syslinux.dpy
> TIMEOUT 0
> APPEND reboot=bios usb_wait=3 console=ttyS0,115200n8 VERBOSE=1
intel_idle.max_cstate=0 processor.max_cstate=1
> DEFAULT /syslinux/linux initrd=/initrd.lrp,/initmod.lrp rw root=/dev/ram0
LEAFCFG=/dev/sda1:vfat

That hangs too after the "Loading /initmod.lrp...Loading
/initmod.lrp...okok" line.


SeaBIOS (version rel-1.8.0-190-gc029eab-20151109_141843-wim-ws)
XHCI init on dev 00:10.0: regs @ 0xfeb22000, 4 ports, 32 slots, 32 byte
contexts
XHCIextcap 0x1 @ feb22500
XHCIprotocol USB  3.00, 2 ports (offset 1), def 0
XHCIprotocol USB  2.00, 2 ports (offset 3), def 10
XHCIextcap 0xa @ feb22540
Found 2 serial ports
ATA controller 1 at 4010/4020/0 (irq 0 dev 88)
EHCI init on dev 00:13.0 (regs=0xfeb25420)
ATA controller 2 at 4018/4024/0 (irq 0 dev 88)
Searching bootorder for: /pci@i0cf8/*@14,7
Searching bootorder for: /rom@img/memtest
Searching bootorder for: /rom@img/setup
XHCI port #4: 0x00200e03, powered, enabled, pls 0, speed 3 [High]
Searching bootorder for: /pci@i0cf8/usb@10/storage@4/*@0/*@0,0
Searching bootorder for: /pci@i0cf8/usb@10/usb-*@4
USB MSC vendor='' product='USB DISK 2.0' rev='PMAP' type=0 removable=1
Initialized USB HUB (0 ports used)
USB MSC blksize=512 sectors=30291264
All threads complete.
Scan for option roms
PCengines Press F10 key now for boot menu:
Searching bootorder for: HALT
drive 0x000f2dc0: PCHS=0/0/0 translation=lba LCHS=1024/255/63 s=30291264
Space available for UMB: c1000-ef000, f-f2dc0
Returned 258048 bytes of ZoneHigh
e820 map has 7 items:
  0:  - 0009f800 = 1 RAM
  1: 0009f800 - 000a = 2 RESERVED
  2: 000f - 0010 = 2 RESERVED
  3: 0010 - dffad000 = 1 RAM
  4: dffad000 - e000 = 2 RESERVED
  5: f800 - fc00 = 2 RESERVED
  6: 0001 - 00011f00 = 1 RAM
enter handle_19:
  NULL
Booting from Hard Disk...
Booting from :7c00

SYSLINUX 6.03 EDD 2014-10-06 Copyright (C) 1994-2014 H. Peter Anvin et al

SYSLINUX 6.03 2014-10-06 Copyright (C) 1994-2014 H. Peter Anvin et al

  - -#- -
  ###   Bering-uClibc Firewall
  #   # #   (5.2.3 - 2015-12-30)
  #   # #   (uClibc 0.9.33.2 Bering-uClibc team)
  #   # # Bering  ### This image brought to you by:
  #   # #
  #   # #   The LEAF project:
  # #   http://leaf.sourceforge.net
  ###
  #   # #   The Shorewall project:
      #   ##http://www.shorewall.net
      ##
###   #   #
 ##   # ##
      ##
 --#--
 -
Loading /syslinux/linux... Loading /syslinux/linux... okok

Loading /initrd.lrp...Loading /initrd.lrp...okok

Loading /initmod.lrp...Loading /initmod.lrp...okok























▒



On Sat, Jan 16, 2016 at 4:37 PM, Andrew  wrote:

> 16.01.2016 16:48, Sven Kirmess пишет:
> > I don't succeed booting Bering on my APU2B4. <
> http://pcengines.ch/apu2b4.htm
> > First I tried the Bering-uClibc_5.2.3_geode_syslinux_serial115200.tar.gz
> > image and got the following error message:
> >
> > This kernel requires the following features not present on the CPU:
> > 3dnow
> >
> > Is that expected? Isn't the geode image the correct one for this board?
> Yes, this board has non-Geode CPU. It has fresh 64bit Jaguar-cores AMD
> CPU. So you can use generic x86_64 or i686 - which has better throughput
> on this board (IMHO on IPv4 there'll be no significant difference or
> even i686 may be faster due to less RAM footprint; on IPv6 x86_64 will
> be better).
>
> >
> > With the Bering-uClibc_5.2.3_i686_syslinux_serial115200.tar.gz image it
> > hangs after "Loading /initmod.lrp...Loading /initmod.lrp...okok"
> Can you look for kernel parameters in syslinux? It seems like kernel
> doesn't use serial console (or hangs before console initialization).
>
>
>
> --
> Site24x7 APM Insight: Get Deep Visibility into Application Performance
> APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month
> Monitor end-to-end web transactions and take corrective actions now
> Troubleshoot faster and improve end-user experience. Signup Now!
> http://pubads.g.doubleclick.net/gampad/clk?id=267308311=/4140
> 

Re: [leaf-user] Problems booting Bering-uClibc on APU2B4

[Andrew]

16.01.2016 16:48, Sven Kirmess пишет:
> I don't succeed booting Bering on my APU2B4.  First I tried the Bering-uClibc_5.2.3_geode_syslinux_serial115200.tar.gz
> image and got the following error message:
>
> This kernel requires the following features not present on the CPU:
> 3dnow
>
> Is that expected? Isn't the geode image the correct one for this board?
Yes, this board has non-Geode CPU. It has fresh 64bit Jaguar-cores AMD 
CPU. So you can use generic x86_64 or i686 - which has better throughput 
on this board (IMHO on IPv4 there'll be no significant difference or 
even i686 may be faster due to less RAM footprint; on IPv6 x86_64 will 
be better).

>
> With the Bering-uClibc_5.2.3_i686_syslinux_serial115200.tar.gz image it
> hangs after "Loading /initmod.lrp...Loading /initmod.lrp...okok"
Can you look for kernel parameters in syslinux? It seems like kernel 
doesn't use serial console (or hangs before console initialization).


--
Site24x7 APM Insight: Get Deep Visibility into Application Performance
APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month
Monitor end-to-end web transactions and take corrective actions now
Troubleshoot faster and improve end-user experience. Signup Now!
http://pubads.g.doubleclick.net/gampad/clk?id=267308311=/4140

leaf-user mailing list: leaf-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/leaf-user
Support Request -- http://leaf-project.org/

Re: [leaf-user] Problems booting Bering-uClibc on APU2B4

[Andrew]

Difference of *-serial images - 1) 'console=ttyS0,115200n8' in kernel 
cmdline and 2) configdb.lrp with preconfigured shell on serial port.

Try to load x86_64 with console=ttyS0,115200n8 specified.

16.01.2016 18:14, Sven Kirmess пишет:
> I didn't try the x86_64 first because there's no serial version of it. I've
> created a stick from Bering-uClibc_5.2.3_x86_64_syslinux_vga.tar.gz and
> replaced the /syslinux/syslinux.cfg file with the one from
> Bering-uClibc_5.2.3_i686_syslinux_serial115200.tar.gz. And I removed the
> quiet kernel option.
>
>> SERIAL 0 115200
>> DISPLAY syslinux.dpy
>> TIMEOUT 0
>> APPEND reboot=bios usb_wait=3 console=ttyS0,115200n8 VERBOSE=1
> intel_idle.max_cstate=0 processor.max_cstate=1
>> DEFAULT /syslinux/linux initrd=/initrd.lrp,/initmod.lrp rw root=/dev/ram0
> LEAFCFG=/dev/sda1:vfat
>
> That hangs too after the "Loading /initmod.lrp...Loading
> /initmod.lrp...okok" line.
>
>
> SeaBIOS (version rel-1.8.0-190-gc029eab-20151109_141843-wim-ws)
> XHCI init on dev 00:10.0: regs @ 0xfeb22000, 4 ports, 32 slots, 32 byte
> contexts
> XHCIextcap 0x1 @ feb22500
> XHCIprotocol USB  3.00, 2 ports (offset 1), def 0
> XHCIprotocol USB  2.00, 2 ports (offset 3), def 10
> XHCIextcap 0xa @ feb22540
> Found 2 serial ports
> ATA controller 1 at 4010/4020/0 (irq 0 dev 88)
> EHCI init on dev 00:13.0 (regs=0xfeb25420)
> ATA controller 2 at 4018/4024/0 (irq 0 dev 88)
> Searching bootorder for: /pci@i0cf8/*@14,7
> Searching bootorder for: /rom@img/memtest
> Searching bootorder for: /rom@img/setup
> XHCI port #4: 0x00200e03, powered, enabled, pls 0, speed 3 [High]
> Searching bootorder for: /pci@i0cf8/usb@10/storage@4/*@0/*@0,0
> Searching bootorder for: /pci@i0cf8/usb@10/usb-*@4
> USB MSC vendor='' product='USB DISK 2.0' rev='PMAP' type=0 removable=1
> Initialized USB HUB (0 ports used)
> USB MSC blksize=512 sectors=30291264
> All threads complete.
> Scan for option roms
> PCengines Press F10 key now for boot menu:
> Searching bootorder for: HALT
> drive 0x000f2dc0: PCHS=0/0/0 translation=lba LCHS=1024/255/63 s=30291264
> Space available for UMB: c1000-ef000, f-f2dc0
> Returned 258048 bytes of ZoneHigh
> e820 map has 7 items:
>0:  - 0009f800 = 1 RAM
>1: 0009f800 - 000a = 2 RESERVED
>2: 000f - 0010 = 2 RESERVED
>3: 0010 - dffad000 = 1 RAM
>4: dffad000 - e000 = 2 RESERVED
>5: f800 - fc00 = 2 RESERVED
>6: 0001 - 00011f00 = 1 RAM
> enter handle_19:
>NULL
> Booting from Hard Disk...
> Booting from :7c00
>
> SYSLINUX 6.03 EDD 2014-10-06 Copyright (C) 1994-2014 H. Peter Anvin et al
>
> SYSLINUX 6.03 2014-10-06 Copyright (C) 1994-2014 H. Peter Anvin et al
>
>- -#- -
>###   Bering-uClibc Firewall
>#   # #   (5.2.3 - 2015-12-30)
>#   # #   (uClibc 0.9.33.2 Bering-uClibc team)
>#   # # Bering  ### This image brought to you by:
>#   # #
>#   # #   The LEAF project:
># #   http://leaf.sourceforge.net
>###
>#   # #   The Shorewall project:
>    #   ##http://www.shorewall.net
>    ##
>  ###   #   #
>   ##   # ##
>    ##
>   --#--
>   -
> Loading /syslinux/linux... Loading /syslinux/linux... okok
>
> Loading /initrd.lrp...Loading /initrd.lrp...okok
>
> Loading /initmod.lrp...Loading /initmod.lrp...okok
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> ▒
>
>
>
> On Sat, Jan 16, 2016 at 4:37 PM, Andrew  wrote:
>
>> 16.01.2016 16:48, Sven Kirmess пишет:
>>> I don't succeed booting Bering on my APU2B4. <
>> http://pcengines.ch/apu2b4.htm
>>> First I tried the Bering-uClibc_5.2.3_geode_syslinux_serial115200.tar.gz
>>> image and got the following error message:
>>>
>>> This kernel requires the following features not present on the CPU:
>>> 3dnow
>>>
>>> Is that expected? Isn't the geode image the correct one for this board?
>> Yes, this board has non-Geode CPU. It has fresh 64bit Jaguar-cores AMD
>> CPU. So you can use generic x86_64 or i686 - which has better throughput
>> on this board (IMHO on IPv4 there'll be no significant difference or
>> even i686 may be faster due to less RAM footprint; on IPv6 x86_64 will
>> be better).
>>
>>> With the Bering-uClibc_5.2.3_i686_syslinux_serial115200.tar.gz image it
>>> hangs after "Loading /initmod.lrp...Loading /initmod.lrp...okok"
>> Can you look for kernel parameters in syslinux? It seems like kernel
>> doesn't use serial console (or hangs before console initialization).
>>
>>
>>
>> 

Re: [leaf-user] Problems booting Bering-uClibc on APU2B4

[Sven Kirmess]

On Sat, Jan 16, 2016 at 5:22 PM, Andrew  wrote:

> Difference of *-serial images - 1) 'console=ttyS0,115200n8' in kernel
> cmdline and 2) configdb.lrp with preconfigured shell on serial port.
>
> Try to load x86_64 with console=ttyS0,115200n8 specified.
>

That's what I tried. I used the following append line in syslinux.cfg:

APPEND reboot=bios usb_wait=3 console=ttyS0,115200n8 VERBOSE=1
intel_idle.max_cstate=0 processor.max_cstate=1

but I hangs too.


> 16.01.2016 18:14, Sven Kirmess пишет:
> > I didn't try the x86_64 first because there's no serial version of it.
> I've
> > created a stick from Bering-uClibc_5.2.3_x86_64_syslinux_vga.tar.gz and
> > replaced the /syslinux/syslinux.cfg file with the one from
> > Bering-uClibc_5.2.3_i686_syslinux_serial115200.tar.gz. And I removed the
> > quiet kernel option.
> >
> >> SERIAL 0 115200
> >> DISPLAY syslinux.dpy
> >> TIMEOUT 0
> >> APPEND reboot=bios usb_wait=3 console=ttyS0,115200n8 VERBOSE=1
> > intel_idle.max_cstate=0 processor.max_cstate=1
> >> DEFAULT /syslinux/linux initrd=/initrd.lrp,/initmod.lrp rw
> root=/dev/ram0
> > LEAFCFG=/dev/sda1:vfat
> >
> > That hangs too after the "Loading /initmod.lrp...Loading
> > /initmod.lrp...okok" line.
> >
> >
> > SeaBIOS (version rel-1.8.0-190-gc029eab-20151109_141843-wim-ws)
> > XHCI init on dev 00:10.0: regs @ 0xfeb22000, 4 ports, 32 slots, 32 byte
> > contexts
> > XHCIextcap 0x1 @ feb22500
> > XHCIprotocol USB  3.00, 2 ports (offset 1), def 0
> > XHCIprotocol USB  2.00, 2 ports (offset 3), def 10
> > XHCIextcap 0xa @ feb22540
> > Found 2 serial ports
> > ATA controller 1 at 4010/4020/0 (irq 0 dev 88)
> > EHCI init on dev 00:13.0 (regs=0xfeb25420)
> > ATA controller 2 at 4018/4024/0 (irq 0 dev 88)
> > Searching bootorder for: /pci@i0cf8/*@14,7
> > Searching bootorder for: /rom@img/memtest
> > Searching bootorder for: /rom@img/setup
> > XHCI port #4: 0x00200e03, powered, enabled, pls 0, speed 3 [High]
> > Searching bootorder for: /pci@i0cf8/usb@10/storage@4/*@0/*@0,0
> > Searching bootorder for: /pci@i0cf8/usb@10/usb-*@4
> > USB MSC vendor='' product='USB DISK 2.0' rev='PMAP' type=0 removable=1
> > Initialized USB HUB (0 ports used)
> > USB MSC blksize=512 sectors=30291264
> > All threads complete.
> > Scan for option roms
> > PCengines Press F10 key now for boot menu:
> > Searching bootorder for: HALT
> > drive 0x000f2dc0: PCHS=0/0/0 translation=lba LCHS=1024/255/63 s=30291264
> > Space available for UMB: c1000-ef000, f-f2dc0
> > Returned 258048 bytes of ZoneHigh
> > e820 map has 7 items:
> >0:  - 0009f800 = 1 RAM
> >1: 0009f800 - 000a = 2 RESERVED
> >2: 000f - 0010 = 2 RESERVED
> >3: 0010 - dffad000 = 1 RAM
> >4: dffad000 - e000 = 2 RESERVED
> >5: f800 - fc00 = 2 RESERVED
> >6: 0001 - 00011f00 = 1 RAM
> > enter handle_19:
> >NULL
> > Booting from Hard Disk...
> > Booting from :7c00
> >
> > SYSLINUX 6.03 EDD 2014-10-06 Copyright (C) 1994-2014 H. Peter Anvin et al
> >
> > SYSLINUX 6.03 2014-10-06 Copyright (C) 1994-2014 H. Peter Anvin et al
> >
> >- -#- -
> >###   Bering-uClibc Firewall
> >#   # #   (5.2.3 - 2015-12-30)
> >#   # #   (uClibc 0.9.33.2 Bering-uClibc
> team)
> >#   # # Bering  ### This image brought to you by:
> >#   # #
> >#   # #   The LEAF project:
> ># #   http://leaf.sourceforge.net
> >###
> >#   # #   The Shorewall project:
> >    #   ##http://www.shorewall.net
> >    ##
> >  ###   #   #
> >   ##   # ##
> >    ##
> >   --#--
> >   -
> > Loading /syslinux/linux... Loading /syslinux/linux... okok
> >
> > Loading /initrd.lrp...Loading /initrd.lrp...okok
> >
> > Loading /initmod.lrp...Loading /initmod.lrp...okok
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > ▒
> >
> >
> >
> > On Sat, Jan 16, 2016 at 4:37 PM, Andrew  wrote:
> >
> >> 16.01.2016 16:48, Sven Kirmess пишет:
> >>> I don't succeed booting Bering on my APU2B4. <
> >> http://pcengines.ch/apu2b4.htm
> >>> First I tried the
> Bering-uClibc_5.2.3_geode_syslinux_serial115200.tar.gz
> >>> image and got the following error message:
> >>>
> >>> This kernel requires the following features not present on the CPU:
> >>> 3dnow
> >>>
> >>> Is that expected? Isn't the geode image the correct one for this board?
> >> Yes, this board has non-Geode CPU. It has fresh 64bit Jaguar-cores AMD
> >> CPU. So you