[attachments were > 100kB; trimmed] Begin forwarded message:
> From: "Jakub Scepka (private)" <jakub.sce...@gmail.com> > Subject: Re: [Nut-upsuser] nutdrv_atcl_usb > Date: March 13, 2015 at 4:30:08 PM EDT > To: "hyo...@gmail.com" <hyo...@gmail.com> > Cc: nut-upsuser <nut-upsuser@lists.alioth.debian.org> > > > Hello Im back with my findings: > > J: I was very complicated to find some device with higher consumption > (except of NAS server, which is not ideal for these tests), so I ended with > attached air purifier. > > > - terminal #3: > upsrw -s ups.delay.shutdown=30 -u admin -p pass ups > J: nothing visible happened > > upsrw -s ups.delay.start=0 -u admin -p pass ups > J: nothing visible happened > > upscmd -u admin -p pass ups shutdown.return > # Wait ~15 seconds, then: > J: nothing visible happened > > upscmd -u admin -p pass ups shutdown.stop > J: nothing visible happened > > # Does this stop the shutdown? If so, wait ~60 seconds then: > J: No it did not.... I'm waiting... nothing... nothing visible happened > > upscmd -u admin -p pass ups shutdown.return > J: I'm waiting a few seconds... and... yes, its gone.... > > # Then wait till the UPS shutdowns the load (does it happen?); wait > one minute or so and then give back power to the UPS. > J: Power cable reconnected, UPS remains totally death... > > # In a short time frame the UPS should now start again bringing back > power to the attached load: does this happen? > > J: No, it didn't started I had to start it with button. > It didn't started because circuit breaker did its job :D > I'm going back to "upscmd -u admin -p pass ups shutdown.return" stepm this > time with power cable attached. > Again I had to start it with button. > > # Now, just to confirm that the various 'SnRm' commands don't work, > cut again the power to the UPS and then: > upsrw -s ups.delay.shutdown=30 -u admin -p pass ups > J: nothing visible happened > > upsrw -s ups.delay.start=60 -u admin -p pass ups > J: nothing visible happened > > upscmd -u admin -p pass ups shutdown.return > # Wait ~60 seconds: does the UPS shutdown the load? > J: Waiting 1 minute or so.... nothing visible happened > > Log: log-friday_13.log.tar.gz > > J: Im going o try it again with power disconnected > J:the same results, but this time, when I connected power cable, the circuit > braker was fine, and UPS started fine (without touching the button). > > Log: log-friday_13-second_attept.log.tar.gz
_______________________________________________ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser