Re: [Paraview] Paraview 5.4.1 error message & freeze
Cory, The Glyph works just fine with my data.vtk and is very useful tool! It was a good advice. As to not-responding and freezing of ParaView: let me accumulate statistics and then I will let you know. I appreciate your help, Sonya Davydycheva On Wed, Oct 4, 2017 at 6:27 PM, Cory Quammen <cory.quam...@kitware.com> wrote: > [cc'ing to the paraview mailing list so others may contribute to and > benefit from the discussion] > > On Tue, Oct 3, 2017 at 3:44 PM, Sonya Davydycheva <sda...@gmail.com> > wrote: > >> Thank you Cory, >> >> For your prompt response. Good to know that the message is harmless. >> >> My Paraview 5.4.1 just stops responding sometimes. >> > > If it stops responding consistently after a specific event or sequence of > events, please let us know. It shouldn't do that :-) > > >> But, well, I installed on another (older) laptop an older version, 4.0.1 >> (5.4.1 did not work there), and it does not freeze. So far, I think it is >> ok for my learning purpose. >> > > Very good. > > >> Both versions (on both computers) allow me to visualize my sample >> model.vtk file: in RenderView I can do Threshold, Slice and Clip and see >> some 3D pictures. But something is wrong with my other sample data.vtk file >> (or, with my approach?). It contains data points (3 coordinates) and the >> resistivity values assigned to them. When I open it, I can see only the >> resistivity colorbar, and I can add axes, but the image stays empty. >> Threshold does not work at all (and even the colorbar disappears when I >> apply it). >> Slice somewhat works, but it stays gray/empty and does not change as I >> move it along the box. >> And when I am in "Slice" mode, pressing "Apply" removes the colorbar as >> well, and does not show anything meaningful. >> >> Any idea how can I activate Threshold or Slice for my resistivity >> data.vtk? >> >> I am beginner and suspect I just miss something simple... >> Reading ParaViewGettingStarted-5.4.0.pdf and ParaViewTutorial54.pdf, >> does not help, so far. >> > > I suspect that you do not have any cells in your 3-point data.vtk file. > Without cells, there is nothing for ParaView to visualize. This is a common > stumbling block for people trying to visualize point data.I suggest after > loading your data applying a Glyph filter. It should show you three spheres > colored according to your resistivity array. Now you should be able to > apply the Threshold and Slice filters as you would expect. > > Thanks, > Cory > > >> Many thanks in advance, >> >> Best regards, >> >> Sonya Davydycheva >> >> >> On Tue, Oct 3, 2017 at 4:12 PM, Cory Quammen <cory.quam...@kitware.com> >> wrote: >> >>> On Tue, Oct 3, 2017 at 3:31 PM, Sonya Davydycheva <sda...@gmail.com> >>> wrote: >>> > Hello, >>> > >>> > Does anybody know what this Output message mean? (appears when I press >>> > "Example Visuatizations"... thougth, some examples emerge), >>> > - >>> > QWindowsWindow::setGeometry: Unable to set geometry 996x403+228+226 on >>> > QWidgetWindow/'pqExampleVisualizationsDialogWindow'. Resulting >>> geometry: >>> > 996x412+228+226 (frame: 9, 36, 9, 9, custom margin: 0, 0, 0, 0, minimum >>> > size: 956x403, maximum size: 16777215x16777215).QWindowsWin >>> dow::setGeometry: >>> > Unable to set geometry 996x403+228+226 on >>> > QWidgetWindow/'pqExampleVisualizationsDialogWindow'. Resulting >>> geometry: >>> > 996x412+228+226 (frame: 9, 36, 9, 9, custom margin: 0, 0, 0, 0, minimum >>> > size: 956x403, maximum size: 16777215x16777215). >>> > -- >>> >>> The message is a warning from the Qt side. Aside from being annoying, >>> it should be harmless. Sorry, but we haven't figured out why this >>> appears on some systems and not others. >>> >>> > Also, my Paraview 5.4.1 (installed under 64-bit Windows 7, ) often >>> freezes. >>> > I wonder if this can be related to the issue above. >>> >>> Does it stop responding or does it crash? It's probably not related to >>> the warning message above. >>> >>> Cory >>> >>> > Thanks, >>> > >>> > Sonya Davydycheva >>> > >>> > >>> > >>> > ___ >>> > Powered by www.kitware.com >>> > >>> > Visit
[Paraview] Paraview 5.4.1 error message & freeze
Hello, Does anybody know what this Output message mean? (appears when I press "Example Visuatizations"... thougth, some examples emerge), - QWindowsWindow::setGeometry: Unable to set geometry 996x403+228+226 on QWidgetWindow/'pqExampleVisualizationsDialogWindow'. Resulting geometry: 996x412+228+226 (frame: 9, 36, 9, 9, custom margin: 0, 0, 0, 0, minimum size: 956x403, maximum size: 16777215x16777215).QWindowsWindow::setGeometry: Unable to set geometry 996x403+228+226 on QWidgetWindow/'pqExampleVisualizationsDialogWindow'. Resulting geometry: 996x412+228+226 (frame: 9, 36, 9, 9, custom margin: 0, 0, 0, 0, minimum size: 956x403, maximum size: 16777215x16777215). -- Also, my Paraview 5.4.1 (installed under 64-bit Windows 7, ) often freezes. I wonder if this can be related to the issue above. Thanks, Sonya Davydycheva <http://3demholding.com> ___ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Search the list archives at: http://markmail.org/search/?q=ParaView Follow this link to subscribe/unsubscribe: http://public.kitware.com/mailman/listinfo/paraview
Re: [Paraview] Paraview 5.4.1 error message & freeze
Hello Cory & Paraview team, I am just giving below a SUMMARY on the errors I encountered while working with ParaView. Version 4.0.1 installed on my old (2013) 64-bit Toshiba laptop under Windows 7: works fine, shows images for model.vtk & glyph for data.vtk; does not freeze. Version 5.4.1 just DOES NOT install on my old (2013) Toshiba laptop. Version 4.0.1 installed on a new (2016) Dell laptop under Windows 7: shows images for model.vtk & glyph for data.vtk, but freezes while attempting to do full screen or just to drug the screen edge in order to increase screen with the following diagnostics: Output messages QWidget:: repaint: Recursive repaint detected. - Version 5.4.1 installed on a 2016 Dell laptop under Windows 7: shows images for model.vtk, BUT glyph for data.vtk STAYS EMPTY, and the application ALSO freezes while attempting to do full screen or just to drug the screen edge in order to increase screen, with no diagnostics. - - - - - - - So, for now I have to continue working with version 4.0.1, and it is fine, so far, for the learning purpose. To prevent freezing, I simply avoid to increase screen / full screen. The version 4.0.1 was my random choice, just the first version I saw available for 64-bit system. Would you recommend for me to try any newer version? Many thanks for your help, Sonya Davydycheva <http://3demholding.com> On Wed, Oct 4, 2017 at 7:29 PM, Sonya Davydycheva <sda...@gmail.com> wrote: > Cory, > > The Glyph works just fine with my data.vtk and is very useful tool! It was > a good advice. > > As to not-responding and freezing of ParaView: let me accumulate > statistics and then I will let you know. > > I appreciate your help, > > Sonya Davydycheva > > > On Wed, Oct 4, 2017 at 6:27 PM, Cory Quammen <cory.quam...@kitware.com> > wrote: > >> [cc'ing to the paraview mailing list so others may contribute to and >> benefit from the discussion] >> >> On Tue, Oct 3, 2017 at 3:44 PM, Sonya Davydycheva <sda...@gmail.com> >> wrote: >> >>> Thank you Cory, >>> >>> For your prompt response. Good to know that the message is harmless. >>> >>> My Paraview 5.4.1 just stops responding sometimes. >>> >> >> If it stops responding consistently after a specific event or sequence of >> events, please let us know. It shouldn't do that :-) >> >> >>> But, well, I installed on another (older) laptop an older version, 4.0.1 >>> (5.4.1 did not work there), and it does not freeze. So far, I think it is >>> ok for my learning purpose. >>> >> >> Very good. >> >> >>> Both versions (on both computers) allow me to visualize my sample >>> model.vtk file: in RenderView I can do Threshold, Slice and Clip and see >>> some 3D pictures. But something is wrong with my other sample data.vtk file >>> (or, with my approach?). It contains data points (3 coordinates) and the >>> resistivity values assigned to them. When I open it, I can see only the >>> resistivity colorbar, and I can add axes, but the image stays empty. >>> Threshold does not work at all (and even the colorbar disappears when I >>> apply it). >>> Slice somewhat works, but it stays gray/empty and does not change as I >>> move it along the box. >>> And when I am in "Slice" mode, pressing "Apply" removes the colorbar as >>> well, and does not show anything meaningful. >>> >>> Any idea how can I activate Threshold or Slice for my resistivity >>> data.vtk? >>> >>> I am beginner and suspect I just miss something simple... >>> Reading ParaViewGettingStarted-5.4.0.pdf and ParaViewTutorial54.pdf, >>> does not help, so far. >>> >> >> I suspect that you do not have any cells in your 3-point data.vtk file. >> Without cells, there is nothing for ParaView to visualize. This is a common >> stumbling block for people trying to visualize point data.I suggest after >> loading your data applying a Glyph filter. It should show you three spheres >> colored according to your resistivity array. Now you should be able to >> apply the Threshold and Slice filters as you would expect. >> >> Thanks, >> Cory >> >> >>> Many thanks in advance, >>> >>> Best regards, >>> >>> Sonya Davydycheva >>> >>> >>> On Tue, Oct 3, 2017 at 4:12 PM, Cory Quammen <cory.quam...@kitware.com> >>> wrote: >>> >>>> On Tue, Oct 3, 2017 at 3:31 PM, Sonya Davydycheva <sda...@gmail.com> >>>> wrote: >>>&g
Re: [Paraview] Paraview 5.4.1 error message & freeze
Thank you Mathieu, Could you please clarify if your comment is related to the freezing of my Paraview window, or to the empty image? And what is the recipe to handle this? I appreciate your help, Sonya Davydycheva <http://3demholding.com> On Wed, Oct 4, 2017 at 2:29 AM, Mathieu Westphal < mathieu.westp...@kitware.com> wrote: > FYI it appears if I force the size of the remote rendering window on my > tiling window manager. > Irrelevant in microsoft windows context, but still. > > Mathieu Westphal > > On Tue, Oct 3, 2017 at 11:12 PM, Cory Quammen <cory.quam...@kitware.com> > wrote: > >> On Tue, Oct 3, 2017 at 3:31 PM, Sonya Davydycheva <sda...@gmail.com> >> wrote: >> > Hello, >> > >> > Does anybody know what this Output message mean? (appears when I press >> > "Example Visuatizations"... thougth, some examples emerge), >> > - >> > QWindowsWindow::setGeometry: Unable to set geometry 996x403+228+226 on >> > QWidgetWindow/'pqExampleVisualizationsDialogWindow'. Resulting >> geometry: >> > 996x412+228+226 (frame: 9, 36, 9, 9, custom margin: 0, 0, 0, 0, minimum >> > size: 956x403, maximum size: 16777215x16777215).QWindowsWin >> dow::setGeometry: >> > Unable to set geometry 996x403+228+226 on >> > QWidgetWindow/'pqExampleVisualizationsDialogWindow'. Resulting >> geometry: >> > 996x412+228+226 (frame: 9, 36, 9, 9, custom margin: 0, 0, 0, 0, minimum >> > size: 956x403, maximum size: 16777215x16777215). >> > -- >> >> The message is a warning from the Qt side. Aside from being annoying, >> it should be harmless. Sorry, but we haven't figured out why this >> appears on some systems and not others. >> >> > Also, my Paraview 5.4.1 (installed under 64-bit Windows 7, ) often >> freezes. >> > I wonder if this can be related to the issue above. >> >> Does it stop responding or does it crash? It's probably not related to >> the warning message above. >> >> Cory >> >> > Thanks, >> > >> > Sonya Davydycheva >> > >> > >> > >> > ___ >> > Powered by www.kitware.com >> > >> > Visit other Kitware open-source projects at >> > http://www.kitware.com/opensource/opensource.html >> > >> > Please keep messages on-topic and check the ParaView Wiki at: >> > http://paraview.org/Wiki/ParaView >> > >> > Search the list archives at: http://markmail.org/search/?q=ParaView >> > >> > Follow this link to subscribe/unsubscribe: >> > http://public.kitware.com/mailman/listinfo/paraview >> > >> >> -- >> Cory Quammen >> Staff R Engineer >> Kitware, Inc. >> ___ >> Powered by www.kitware.com >> >> Visit other Kitware open-source projects at >> http://www.kitware.com/opensource/opensource.html >> >> Please keep messages on-topic and check the ParaView Wiki at: >> http://paraview.org/Wiki/ParaView >> >> Search the list archives at: http://markmail.org/search/?q=ParaView >> >> Follow this link to subscribe/unsubscribe: >> http://public.kitware.com/mailman/listinfo/paraview >> > > ___ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Search the list archives at: http://markmail.org/search/?q=ParaView Follow this link to subscribe/unsubscribe: http://public.kitware.com/mailman/listinfo/paraview
[Paraview] Rescale & axes grid tricks
Cory, Alan and all ParaView experts, I keep playing with two versions of Paraview following your kind advice, thanks (see below, on Paraview 5.4.1 error message & freeze). The earlier versions freeze sometimes as well, but I found a way to isolate and avoid the bug (I just avoid making full screen or draw the screen edges). The recommended Paraview 4.4.0 I like the most, since it has button "Rescale", which I find very useful: when you do threshold to remove extreme values from the view, the picture looses contrast, and you can rescale the color again. BUT in Paraview 5.2.0 I do not see "Rescale" button. So, after "Threshold" all looks grayish & hard to understand what is what. I then would stick to Paraview 4.4.0, but it has another drawback or a bug: when I try to make visible Axas Grid & units, it works with 3D data sets and 1D data sets (along one line), but does not work with 2D data sets. Namely, it first appears, when I load the file, but after I click Glyph or Threshold, the picture emerges, but the Axas Grid & units disapper! With 3D/1D data it does not, and you can enjoy seeing your full geometry. But not with 2D, and I now mostly work with 2D data. Paraview 5.2.0 has no such problem. SUMMARY: Paraview 5.2.0 allows seeing Axas Grid & units, but does not allow Rescale color. Paraview 4.4.0 does not allow seeing Axas Grid & units with 2D data, but allows Rescale. Is there a way to enjoy both? Thank you, Sonya Davydycheva <http://3demholding.com> (713)498-6139 On Mon, Oct 9, 2017 at 1:54 PM, Scott, W Alan <wasc...@sandia.gov> wrote: > Sonya, > > If nothing else works, use ParaView 4.4.0. That release is a workhorse, > and was the version before we updated OpenGL requirements. > > > > Alan > > > > > > *From:* ParaView [mailto:paraview-boun...@paraview.org] *On Behalf Of *Sonya > Davydycheva > *Sent:* Monday, October 9, 2017 9:53 AM > *To:* Quammen, Cory (External Contacts) <cory.quam...@kitware.com> > *Cc:* ParaView <paraview@paraview.org> > *Subject:* [EXTERNAL] Re: [Paraview] Paraview 5.4.1 error message & freeze > > > > Hello Cory & Paraview team, > > > > I am just giving below a SUMMARY on the errors I encountered while working > with ParaView. > > > > Version 4.0.1 installed on my old (2013) 64-bit Toshiba laptop under > Windows 7: works fine, shows images for model.vtk & glyph for data.vtk; > does not freeze. > > > > Version 5.4.1 just DOES NOT install on my old (2013) Toshiba laptop. > > > > Version 4.0.1 installed on a new (2016) Dell laptop under Windows 7: shows > images for model.vtk & glyph for data.vtk, but freezes while attempting to > do full screen or just to drug the screen edge in order to increase screen > with the following diagnostics: > > > > Output messages > > QWidget:: repaint: Recursive repaint detected. > > - > > > > Version 5.4.1 installed on a 2016 Dell laptop under Windows 7: shows > images for model.vtk, BUT glyph for data.vtk STAYS EMPTY, and the > application ALSO freezes while attempting to do full screen or just to drug > the screen edge in order to increase screen, with no diagnostics. > > > > - - - - - - - > > So, for now I have to continue working with version 4.0.1, and it is fine, > so far, for the learning purpose. To prevent freezing, I simply avoid to > increase screen / full screen. > > > > The version 4.0.1 was my random choice, just the first version I saw > available for 64-bit system. > > Would you recommend for me to try any newer version? > > > > Many thanks for your help, > > > > Sonya Davydycheva > > > > > > On Wed, Oct 4, 2017 at 7:29 PM, Sonya Davydycheva <sda...@gmail.com> > wrote: > > Cory, > > > > The Glyph works just fine with my data.vtk and is very useful tool! It was > a good advice. > > > > As to not-responding and freezing of ParaView: let me accumulate > statistics and then I will let you know. > > > > I appreciate your help, > > > Sonya Davydycheva > > > > > > On Wed, Oct 4, 2017 at 6:27 PM, Cory Quammen <cory.quam...@kitware.com> > wrote: > > [cc'ing to the paraview mailing list so others may contribute to and > benefit from the discussion] > > > > On Tue, Oct 3, 2017 at 3:44 PM, Sonya Davydycheva <sda...@gmail.com> > wrote: > > Thank you Cory, > > > > For your prompt response. Good to know that the message is harmless. > > > > My Paraview 5.4.1 just stops responding sometimes. > > > > If it stops responding consistently after a specific event or sequence of
Re: [Paraview] Rescale & axes grid tricks
Cory, This is what I needed. It works. Many thanks, Sonya Davydycheva <http://3demholding.com> (713)498-6139 On Mon, Oct 23, 2017 at 7:47 AM, Cory Quammen <cory.quam...@kitware.com> wrote: > Sonya, > > ParaView 5.2.0 does have a "Rescale" color map feature. It is circled in > red here: > > [image: Inline image 1] > > Best regards, > Cory > > On Mon, Oct 23, 2017 at 8:09 AM, Sonya Davydycheva <sda...@gmail.com> > wrote: > >> Cory, Alan and all ParaView experts, >> >> I keep playing with two versions of Paraview following your kind advice, >> thanks (see below, on Paraview 5.4.1 error message & freeze). >> >> The earlier versions freeze sometimes as well, but I found a way to >> isolate and avoid the bug (I just avoid making full screen or draw the >> screen edges). >> >> The recommended Paraview 4.4.0 I like the most, since it has button >> "Rescale", which I find very useful: when you do threshold to remove >> extreme values from the view, the picture looses contrast, and you can >> rescale the color again. >> >> BUT in Paraview 5.2.0 I do not see "Rescale" button. So, after >> "Threshold" all looks grayish & hard to understand what is what. >> >> I then would stick to Paraview 4.4.0, but it has another drawback or a >> bug: >> when I try to make visible Axas Grid & units, it works with 3D data sets >> and 1D data sets (along one line), but does not work with 2D data sets. >> Namely, it first appears, when I load the file, but after I click Glyph or >> Threshold, the picture emerges, but the Axas Grid & units disapper! With >> 3D/1D data it does not, and you can enjoy seeing your full geometry. But >> not with 2D, and I now mostly work with 2D data. Paraview 5.2.0 has no >> such problem. >> >> SUMMARY: >> Paraview 5.2.0 allows seeing Axas Grid & units, but does not allow >> Rescale color. >> Paraview 4.4.0 does not allow seeing Axas Grid & units with 2D data, but >> allows Rescale. >> >> Is there a way to enjoy both? >> >> Thank you, >> >> Sonya Davydycheva <http://3demholding.com> >> (713)498-6139 >> >> >> On Mon, Oct 9, 2017 at 1:54 PM, Scott, W Alan <wasc...@sandia.gov> wrote: >> >>> Sonya, >>> >>> If nothing else works, use ParaView 4.4.0. That release is a workhorse, >>> and was the version before we updated OpenGL requirements. >>> >>> >>> >>> Alan >>> >>> >>> >>> >>> >>> *From:* ParaView [mailto:paraview-boun...@paraview.org] *On Behalf Of *Sonya >>> Davydycheva >>> *Sent:* Monday, October 9, 2017 9:53 AM >>> *To:* Quammen, Cory (External Contacts) <cory.quam...@kitware.com> >>> *Cc:* ParaView <paraview@paraview.org> >>> *Subject:* [EXTERNAL] Re: [Paraview] Paraview 5.4.1 error message & >>> freeze >>> >>> >>> >>> Hello Cory & Paraview team, >>> >>> >>> >>> I am just giving below a SUMMARY on the errors I encountered while >>> working with ParaView. >>> >>> >>> >>> Version 4.0.1 installed on my old (2013) 64-bit Toshiba laptop under >>> Windows 7: works fine, shows images for model.vtk & glyph for data.vtk; >>> does not freeze. >>> >>> >>> >>> Version 5.4.1 just DOES NOT install on my old (2013) Toshiba laptop. >>> >>> >>> >>> Version 4.0.1 installed on a new (2016) Dell laptop under Windows 7: >>> shows images for model.vtk & glyph for data.vtk, but freezes while >>> attempting to do full screen or just to drug the screen edge in order to >>> increase screen with the following diagnostics: >>> >>> >>> >>> Output messages >>> >>> QWidget:: repaint: Recursive repaint detected. >>> >>> - >>> >>> >>> >>> Version 5.4.1 installed on a 2016 Dell laptop under Windows 7: shows >>> images for model.vtk, BUT glyph for data.vtk STAYS EMPTY, and the >>> application ALSO freezes while attempting to do full screen or just to drug >>> the screen edge in order to increase screen, with no diagnostics. >>> >>> >>> >>> - - - - - - - >>> >>> So, for now I have to continue working with version 4.0.1, and it is >>> fine, so far, for the learning purpose. To pre
Re: [Paraview] GoCAD and Earth Vision grid files *.ts & *.evgd
Thank you Aashish, But the link you provided includes: - GoCad ASCII Files (*.gp, *.ts, *.pl, *.vs, *.vts, *.vo, *.sg) (see Bottom of Supported Readers). Does it mean GoCAD files are doable already? Or, something still needs to be added to Paraview, to read them? Sonya Davydycheva <http://3demholding.com> (713)498-6139 On Wed, Nov 15, 2017 at 11:51 AM, Aashish Chaudhary < aashish.chaudh...@kitware.com> wrote: > the actual code location is here: https://github.com/ > ObjectivitySRC/PVGPlugins/tree/master/Readers/GocadReader > > Let us know if you decide to bring in this code into VTK / ParaView as we > will be very interested in it as well. > > Thanks, > > > On Wed, Nov 15, 2017 at 12:46 PM Aashish Chaudhary < > aashish.chaudh...@kitware.com> wrote: > >> I do not think that GoCAR ASCII (ts) files are directly readable in >> ParaView. Although there is a reader in this repo http://paraviewgeo. >> objectivity.ca/documentation/user-manual/supported-formats that you >> could bring into ParaView / VTK. If that is the case, we would be happy to >> help bringing in the reader in VTK / ParaView. >> >> thanks >> >> >> On Wed, Nov 15, 2017 at 11:10 AM Sonya Davydycheva <sda...@gmail.com> >> wrote: >> >>> Hello, >>> >>> 1) Is it possible to read/import GoCAD file *.ts (triangulated surfaces) >>> using ParaView, with a possibility to further read its data in ascii >>> format, or convert to a 3D function of space point (x,y,z)? >>> >>> 2) The same question about Earth Vision grid and the respective files >>> *.evgd: can I read/import them and transfer to ascii or 3D function(x,y,z) >>> using ParaView? >>> >>> Thank you, >>> >>> Sonya Davydycheva <http://3demholding.com> >>> (713)498-6139 >>> >>> ___ >>> Powered by www.kitware.com >>> >>> Visit other Kitware open-source projects at http://www.kitware.com/ >>> opensource/opensource.html >>> >>> Please keep messages on-topic and check the ParaView Wiki at: >>> http://paraview.org/Wiki/ParaView >>> >>> Search the list archives at: http://markmail.org/search/?q=ParaView >>> >>> Follow this link to subscribe/unsubscribe: >>> http://public.kitware.com/mailman/listinfo/paraview >>> >> ___ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Search the list archives at: http://markmail.org/search/?q=ParaView Follow this link to subscribe/unsubscribe: http://public.kitware.com/mailman/listinfo/paraview
[Paraview] GoCAD and Earth Vision grid files *.ts & *.evgd
Hello, 1) Is it possible to read/import GoCAD file *.ts (triangulated surfaces) using ParaView, with a possibility to further read its data in ascii format, or convert to a 3D function of space point (x,y,z)? 2) The same question about Earth Vision grid and the respective files *.evgd: can I read/import them and transfer to ascii or 3D function(x,y,z) using ParaView? Thank you, Sonya Davydycheva <http://3demholding.com> (713)498-6139 ___ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Search the list archives at: http://markmail.org/search/?q=ParaView Follow this link to subscribe/unsubscribe: http://public.kitware.com/mailman/listinfo/paraview
[Paraview] Glyph type options
Hello, I wonder if there is any option to change SIZE of the glyphs (arrows or spheres)? They look enormously large and tend block each other on my scalar data set while using Glyph option. I will appreciate any tip. Sonya Davydycheva <http://3demholding.com> (713)498-6139 ___ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Search the list archives at: http://markmail.org/search/?q=ParaView Follow this link to subscribe/unsubscribe: https://paraview.org/mailman/listinfo/paraview
[Paraview] 3D visualization of vectors as vtk-files
Hello, Can anybody please send me a sample *.vtk file containing VECTOR fields? I need it to start study options how to 3D-visualize, say, electromagnetic field or currents. I can visualize separate components as scalars using "Glyph" and having each component as a separate vtk-file (coordinates & values). Now I try to convert them in a vector vtk-file, if possible, and see the whole field in 3D. Thanks in advance, Sonya Davydycheva <http://3demholding.com> (713)498-6139 ___ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Search the list archives at: http://markmail.org/search/?q=ParaView Follow this link to subscribe/unsubscribe: https://paraview.org/mailman/listinfo/paraview
