Re: [sane-devel] Fujitsu Scansnap ix500 stops after 2 pages
If you stop using buffermode, does the problem also stop? allan On Tue, Oct 27, 2020 at 7:45 AM Jens Wulf wrote: > > I tried to scan 3 pages with: > scanimage -b --format=tiff --mode Color --resolution 300dpi --source "ADF > Duplex" --buffermode On > I get: > Scanning page 1 > Scanned page 1. (scanner status = 5) > Scanning page 2 > Scanned page 2. (scanner status = 5) > Scanning page 3 > scanimage: sane_read: Error during device I/O > Scanned page 3. (scanner status = 9) > > The scanner stops after 2nd page and blinks orange until power off. > > Does anyone have a hint for me? > > Jens > -- "well, I stand up next to a mountain- and I chop it down with the edge of my hand"
[sane-devel] Canon LiDE400
SANE website proclaims this model is supported by Pixma back end, isn't supported by Pixma alone, I get the scanner to work using Rolf Bensch ppa. When scanning any document, the captured area is not the complete platen area. Might be foo in the hardware, not certain. >From left to right, at the target corner, I lose about 1.5 to 2 mm from target side, havent explored opposite side limits. >From top to bottom, I lose about 1.5 to 2 mm from target top edge, I lose maybe 5 mm from bottom of platen (the end which is opposite top). Would love to try any config file edits, if any, to assist, name the file and path, and suggest lines to be edited.
[sane-devel] copier machine scanners not detected for A3 ADF auto document feeder
https://ubuntuforums.org/showthread.php?t=2451321=13989838#post13989838 http://forums.debian.net/viewtopic.php?f=7=147524 https://www.kubuntuforums.net/showthread.php/77367-copier-machine-scanners-not-detected-for-A3-ADF-auto-document-feeder?p=440905#post440905 https://forum.kde.org/viewtopic.php?f=15=168091 https://askubuntu.com/questions/1279245/copier-machine-scanners-not-detected-for-a3-adf-auto-document-feeder Hi i have an issue, I just throwed it into as many forums as possible, I'd be glad if you could help on the one you prefer, regards
[sane-devel] Fujitsu Scansnap ix500 stops after 2 pages
I tried to scan 3 pages with: scanimage -b --format=tiff --mode Color --resolution 300dpi --source "ADF Duplex" --buffermode On I get: Scanning page 1 Scanned page 1. (scanner status = 5) Scanning page 2 Scanned page 2. (scanner status = 5) Scanning page 3 scanimage: sane_read: Error during device I/O Scanned page 3. (scanner status = 9) The scanner stops after 2nd page and blinks orange until power off. Does anyone have a hint for me? Jens
