[Bug 2062386] Re: Maxlinear Ethernet GPY115B report gpy_config_aneg failed: -110 and Link UP is not visible
Hi, I integrated locally this patches: # tsn 0001-taprio-Add-support-for-frame-preemption-offload.tsn 0002-mqprio-Add-support-for-frame-preemption-offload.tsn 0003-taprio-Replace-tc_map_to_queue_mask.tsn 0004-core-Introduce-netdev_tc_map_to_queue_mask.tsn 0005-net-pcs-xpcs-enable-xpcs-reset-skipping.tsn 0006-net-stmmac-Bugfix-on-stmmac_interrupt-for-WOL.tsn 0007-net-stmmac-add-FPE-preempt-setting-for-TxQ-preemptible.tsn 0008-net-stmmac-support-recalculating-of-CBS-idle-slope-und.tsn 0009-net-stmmac-Add-module-param-to-del-keep-est-hw-conf.tsn 0010-net-phy-increase-gpy-loopback-test-delay.tsn 0011-net-stmmac-Resolve-poor-line-rate-after-switching-from.tsn 0012-net-phy-dp83867-perform-restart-AN-after-modifying-AN-.tsn 0013-stmmac-intel-Separate-ADL-N-and-RPL-P-device-ID-from-T.tsn 0014-net-stmmac-Adjust-mac_capabilities-for-Intel-mGbE-2.5G.tsn 0015-stmmac-intel-skip-xpcs-reset-for-2.5Gbps-on-Intel-Alde.tsn 0016-net-stmmac-add-check-for-2.5G-mode-to-prevent-MAC-capa.tsn 0017-stmmac-intel-Enable-PHY-WoL-in-ADL-N.tsn 0018-net-phy-reconfigure-PHY-WoL-when-WoL-option-is-enabled.tsn 0019-net-stmmac-fix-MAC-and-phylink-mismatch-issue-after-re.tsn 0020-xsk-add-txtime-field-in-xdp_desc-struct.tsn 0021-net-stmmac-restructure-Rx-Tx-hardware-timestamping-fun.tsn 0022-net-stmmac-Add-per-packet-time-based-scheduling-for-XD.tsn 0023-net-stmmac-introduce-AF_XDP-ZC-RX-HW-timestamps.tsn 0024-net-stmmac-add-fsleep-in-HW-Rx-timestamp-checking-loop.tsn 0025-net-stmmac-provide-allow_switch_interface-flag.tsn 0026-net-stmmac-select-PCS-negotiation-mode-according-to-th.tsn 0027-net-pcs-xpcs-re-initiate-clause-37-Auto-negotiation.tsn 0028-arch-x86-Add-IPC-mailbox-accessor-function-and-add-SoC.tsn 0029-net-stmmac-configure-SerDes-according-to-the-interface.tsn 0030-stmmac-intel-interface-switching-support-for-intel-pla.tsn 0031-net-stmmac-Set-mac_managed_pm-flag-from-stmmac-to-reso.tsn 0032-net-phylink-Add-module_exit.tsn And now 1Gbps is working. Link for series file (multiple patches): https://github.com/intel/linux-intel-quilt/blob/mainline-tracking/linux/v6.9-rc3/patches/series Port is available now and ip address exist on first interface. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/2062386 Title: Maxlinear Ethernet GPY115B report gpy_config_aneg failed: -110 and Link UP is not visible To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2062386/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 2062386] Re: Maxlinear Ethernet GPY115B report gpy_config_aneg failed: -110 and Link UP is not visible
** Changed in: linux (Ubuntu) Assignee: (unassigned) => Kleber Sacilotto de Souza (kleber-souza) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/2062386 Title: Maxlinear Ethernet GPY115B report gpy_config_aneg failed: -110 and Link UP is not visible To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2062386/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 2062386] Re: Maxlinear Ethernet GPY115B report gpy_config_aneg failed: -110 and Link UP is not visible
** Description changed: Hello Ubuntu Team, I notice issue today with Maxlinear Ethernet GPY115B controller. This controller report issue in dmesg and port not have link up. My target is: OnLogic HX310 with two Ethernet Ports. > Official page: https://www.onlogic.com/computers/industrial/fanless/helix-300/ + Error: Maxlinear Ethernet GPY115B stmmac-3:01: gpy_config_aneg failed: + -110 - Error: Maxlinear Ethernet GPY115B stmmac-3:01: gpy_config_aneg failed: -110 + + https://billauer.co.il/blog/2014/01/networkmanager-carrier-detect/ + (stmmaceth: NetworkManager fails to bring up a wired Ethernet NIC) OS: Ubuntu 24.04 LTS Kernel: 6.8.0-22.22-generic 6.8.1 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/2062386 Title: Maxlinear Ethernet GPY115B report gpy_config_aneg failed: -110 and Link UP is not visible To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2062386/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 2062386] Re: Maxlinear Ethernet GPY115B report gpy_config_aneg failed: -110 and Link UP is not visible
** Attachment added: "inxi - 6.8.0 - generic" https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2062386/+attachment/5767539/+files/inxi-6.8.0-22-generic.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/2062386 Title: Maxlinear Ethernet GPY115B report gpy_config_aneg failed: -110 and Link UP is not visible To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2062386/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 2062386] Re: Maxlinear Ethernet GPY115B report gpy_config_aneg failed: -110 and Link UP is not visible
** Attachment added: "lspci - 6.8.0 - generic" https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2062386/+attachment/5767538/+files/lspci-6.8.0-22-generic.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/2062386 Title: Maxlinear Ethernet GPY115B report gpy_config_aneg failed: -110 and Link UP is not visible To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2062386/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 2062386] Re: Maxlinear Ethernet GPY115B report gpy_config_aneg failed: -110 and Link UP is not visible
** Attachment added: "lshw - 6.8.0 - generic" https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2062386/+attachment/5767537/+files/lshw-6.8.0-22-generic.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/2062386 Title: Maxlinear Ethernet GPY115B report gpy_config_aneg failed: -110 and Link UP is not visible To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2062386/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 2062386] Re: Maxlinear Ethernet GPY115B report gpy_config_aneg failed: -110 and Link UP is not visible
** Attachment added: "dmesg - 6.8.0 - generic" https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2062386/+attachment/5767536/+files/dmesg-6.8.0-22-generic.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/2062386 Title: Maxlinear Ethernet GPY115B report gpy_config_aneg failed: -110 and Link UP is not visible To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2062386/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
