Re: dlr issue
hi that's what i got in debug mode and receiver (B#) switched off. any option to get the more detail result? br budi On Mon, Aug 30, 2010 at 12:51 PM, sangprabv sangpr...@gmail.com wrote: I don't see any DLR there :) sangprabv sangpr...@gmail.com http://www.petitiononline.com/froyo/ On Aug 30, 2010, at 12:21 PM, budi wibowo wrote: hi i attache bb log for reference 2010-08-30 11:43:31 [23161] [9] DEBUG: sequence_number: 2 = 0x0002 2010-08-30 11:43:31 [23161] [9] DEBUG: SMPP PDU dump ends. 2010-08-30 11:43:31 [23161] [9] DEBUG: SMPP[smsc4]: throughput (0.00,300.00) 2010-08-30 11:43:31 [23161] [8] DEBUG: SMPP[smsc3]: Got PDU: 2010-08-30 11:43:31 [23161] [8] DEBUG: SMPP PDU 0x9374668 dump: 2010-08-30 11:43:31 [23161] [8] DEBUG: type_name: enquire_link_resp 2010-08-30 11:43:31 [23161] [8] DEBUG: command_id: 2147483669 = 0x8015 2010-08-30 11:43:31 [23161] [8] DEBUG: command_status: 0 = 0x 2010-08-30 11:43:31 [23161] [8] DEBUG: sequence_number: 2 = 0x0002 2010-08-30 11:43:31 [23161] [8] DEBUG: SMPP PDU dump ends. 2010-08-30 11:43:31 [23161] [7] DEBUG: SMPP[smsc2]: Got PDU: 2010-08-30 11:43:31 [23161] [7] DEBUG: SMPP PDU 0x9374668 dump: 2010-08-30 11:43:31 [23161] [7] DEBUG: type_name: enquire_link_resp 2010-08-30 11:43:31 [23161] [7] DEBUG: command_id: 2147483669 = 0x8015 2010-08-30 11:43:31 [23161] [7] DEBUG: command_status: 0 = 0x 2010-08-30 11:43:31 [23161] [7] DEBUG: sequence_number: 2 = 0x0002 2010-08-30 11:43:31 [23161] [7] DEBUG: SMPP PDU dump ends. 2010-08-30 11:43:31 [23161] [7] DEBUG: SMPP[smsc2]: throughput (0.00,300.00) 2010-08-30 11:43:31 [23161] [9] DEBUG: SMPP[smsc4]: throughput (0.00,300.00) 2010-08-30 11:43:31 [23161] [9] DEBUG: SMPP[smsc4]: Got PDU: 2010-08-30 11:43:31 [23161] [9] DEBUG: SMPP PDU 0x9374668 dump: 2010-08-30 11:43:31 [23161] [9] DEBUG: type_name: enquire_link_resp 2010-08-30 11:43:31 [23161] [9] DEBUG: command_id: 2147483669 = 0x8015 2010-08-30 11:43:31 [23161] [9] DEBUG: command_status: 0 = 0x 2010-08-30 11:43:31 [23161] [9] DEBUG: sequence_number: 2 = 0x0002 2010-08-30 11:43:31 [23161] [9] DEBUG: SMPP PDU dump ends. 2010-08-30 11:43:31 [23161] [9] DEBUG: SMPP[smsc4]: throughput (0.00,300.00) 2010-08-30 11:43:41 [23161] [6] DEBUG: SMPP[smsc1]: Got PDU: 2010-08-30 11:43:41 [23161] [6] DEBUG: SMPP PDU 0x9374668 dump: 2010-08-30 11:43:41 [23161] [6] DEBUG: type_name: enquire_link 2010-08-30 11:43:41 [23161] [6] DEBUG: command_id: 21 = 0x0015 2010-08-30 11:43:41 [23161] [6] DEBUG: command_status: 0 = 0x 2010-08-30 11:43:41 [23161] [6] DEBUG: sequence_number: 2 = 0x0002 2010-08-30 11:43:41 [23161] [6] DEBUG: SMPP PDU dump ends. 2010-08-30 11:43:41 [23161] [6] DEBUG: SMPP[smsc1]: Sending PDU: 2010-08-30 11:43:41 [23161] [6] DEBUG: SMPP PDU 0x9374748 dump: 2010-08-30 11:43:41 [23161] [6] DEBUG: type_name: enquire_link_resp 2010-08-30 11:43:41 [23161] [6] DEBUG: command_id: 2147483669 = 0x8015 2010-08-30 11:43:41 [23161] [6] DEBUG: command_status: 0 = 0x 2010-08-30 11:43:41 [23161] [6] DEBUG: sequence_number: 2 = 0x0002 2010-08-30 11:43:41 [23161] [6] DEBUG: SMPP PDU dump ends. 2010-08-30 11:43:41 [23161] [8] DEBUG: SMPP[smsc3]: Got PDU: 2010-08-30 11:43:41 [23161] [8] DEBUG: SMPP PDU 0x9374668 dump: 2010-08-30 11:43:41 [23161] [8] DEBUG: type_name: enquire_link 2010-08-30 11:43:41 [23161] [8] DEBUG: command_id: 21 = 0x0015 2010-08-30 11:43:41 [23161] [8] DEBUG: command_status: 0 = 0x 2010-08-30 11:43:41 [23161] [8] DEBUG: sequence_number: 2 = 0x0002 2010-08-30 11:43:41 [23161] [8] DEBUG: SMPP PDU dump ends. 2010-08-30 11:43:41 [23161] [8] DEBUG: SMPP[smsc3]: Sending PDU: 2010-08-30 11:43:41 [23161] [8] DEBUG: SMPP PDU 0x9374748 dump: 2010-08-30 11:43:41 [23161] [8] DEBUG: type_name: enquire_link_resp 2010-08-30 11:43:41 [23161] [8] DEBUG: command_id: 2147483669 = 0x8015 2010-08-30 11:43:41 [23161] [8] DEBUG: command_status: 0 = 0x 2010-08-30 11:43:41 [23161] [8] DEBUG: sequence_number: 2 = 0x0002 2010-08-30 11:43:41 [23161] [8] DEBUG: SMPP PDU dump ends. 2010-08-30 11:43:41 [23161] [9] DEBUG: SMPP[smsc4]: throughput (0.00,300.00) 2010-08-30 11:43:41 [23161] [9] DEBUG: SMPP[smsc4]: Got PDU: 2010-08-30 11:43:41 [23161] [9] DEBUG: SMPP PDU 0x9374668 dump: 2010-08-30 11:43:41 [23161] [9] DEBUG: type_name: enquire_link 2010-08-30 11:43:41 [23161] [9] DEBUG: command_id: 21 = 0x0015 2010-08-30 11:43:41 [23161] [9] DEBUG: command_status: 0 = 0x 2010-08-30 11:43:41 [23161] [9] DEBUG: sequence_number: 2 = 0x0002 2010-08-30 11:43:41 [23161] [9] DEBUG: SMPP PDU dump ends. 2010-08-30 11:43:41 [23161] [9] DEBUG: SMPP[smsc4]: Sending PDU: 2010-08-30 11:43:41 [23161] [9] DEBUG: SMPP PDU 0x9374748 dump: 2010-08-30 11:43:41 [23161] [9] DEBUG: type_name: enquire_link_resp 2010-08-30 11:43:41 [23161] [9] DEBUG:
Re: Kannel with vb6
VB 6 is no longer supported and is definitely not VB.net. In any event, if you want to use Kannel on Windows the recommendation is that you use something like Cygwin. Another option is to use Mono to run .Net applications on a Linux box. Not sure if the Mono project compiles VB.Net but I am sure you could find out pretty easily. I am assuming that it does. Third and final option is that you can have a windows application posting to Kannel on a Linux machine. As for examples. There are plenty PHP examples that I have come across. The idea is pretty basic. What ever language you are using, you need to post to a URL that Kannel is listening to. The contents of that URL can be found in the UG. On Fri, Aug 27, 2010 at 4:56 AM, Niko nick_p_z...@yahoo.com wrote: marcelo.olivas at up-mobile.com writes: Hi Denis, I am not sure what you mean by work. If you want to use kannel and then build your app to sent and receive sms, then yes. Kannel does the conversion of smpp to http awesome, so in reality you can use wathever framework/language you want as long as it can use the http stack. Hope that helps. Hi Marcelo, can u please give me a tutor of how to use kannel and then build my app to send sms, like u said before? Using http stack or whatever it is. I cant find how to do this on the web (not yet, maybe), so if u know about that, please kindly give me some example. I want to use kannel in windows and then build my app in VB.net 2008. My app will do something like sms broadcasting, using several GSM modem (as I have read that kannel supports multiple virtual SMSC). Thanks in advance. *Replies from any others of you who know how to do this is highly expected too. Niko.
Re: dlr issue
You said all MT are DLVRD. Where did you get the statuses? Kannel uses dlr-mask = 1 to flag each DLVRD MT. Your log only said that the dlr-mask was set to 31, which mean it should capture all statuses (please refer to the user guide). And from last part of your log, it said the MT got ACK. None said the MT is DLVRD. sangprabv sangpr...@gmail.com http://www.petitiononline.com/froyo/ On Aug 30, 2010, at 3:14 PM, budi wibowo wrote: hi that's what i got in debug mode and receiver (B#) switched off. any option to get the more detail result? br budi On Mon, Aug 30, 2010 at 12:51 PM, sangprabv sangpr...@gmail.com wrote: I don't see any DLR there :) sangprabv sangpr...@gmail.com http://www.petitiononline.com/froyo/ On Aug 30, 2010, at 12:21 PM, budi wibowo wrote: hi i attache bb log for reference 2010-08-30 11:43:31 [23161] [9] DEBUG: sequence_number: 2 = 0x0002 2010-08-30 11:43:31 [23161] [9] DEBUG: SMPP PDU dump ends. 2010-08-30 11:43:31 [23161] [9] DEBUG: SMPP[smsc4]: throughput (0.00,300.00) 2010-08-30 11:43:31 [23161] [8] DEBUG: SMPP[smsc3]: Got PDU: 2010-08-30 11:43:31 [23161] [8] DEBUG: SMPP PDU 0x9374668 dump: 2010-08-30 11:43:31 [23161] [8] DEBUG: type_name: enquire_link_resp 2010-08-30 11:43:31 [23161] [8] DEBUG: command_id: 2147483669 = 0x8015 2010-08-30 11:43:31 [23161] [8] DEBUG: command_status: 0 = 0x 2010-08-30 11:43:31 [23161] [8] DEBUG: sequence_number: 2 = 0x0002 2010-08-30 11:43:31 [23161] [8] DEBUG: SMPP PDU dump ends. 2010-08-30 11:43:31 [23161] [7] DEBUG: SMPP[smsc2]: Got PDU: 2010-08-30 11:43:31 [23161] [7] DEBUG: SMPP PDU 0x9374668 dump: 2010-08-30 11:43:31 [23161] [7] DEBUG: type_name: enquire_link_resp 2010-08-30 11:43:31 [23161] [7] DEBUG: command_id: 2147483669 = 0x8015 2010-08-30 11:43:31 [23161] [7] DEBUG: command_status: 0 = 0x 2010-08-30 11:43:31 [23161] [7] DEBUG: sequence_number: 2 = 0x0002 2010-08-30 11:43:31 [23161] [7] DEBUG: SMPP PDU dump ends. 2010-08-30 11:43:31 [23161] [7] DEBUG: SMPP[smsc2]: throughput (0.00,300.00) 2010-08-30 11:43:31 [23161] [9] DEBUG: SMPP[smsc4]: throughput (0.00,300.00) 2010-08-30 11:43:31 [23161] [9] DEBUG: SMPP[smsc4]: Got PDU: 2010-08-30 11:43:31 [23161] [9] DEBUG: SMPP PDU 0x9374668 dump: 2010-08-30 11:43:31 [23161] [9] DEBUG: type_name: enquire_link_resp 2010-08-30 11:43:31 [23161] [9] DEBUG: command_id: 2147483669 = 0x8015 2010-08-30 11:43:31 [23161] [9] DEBUG: command_status: 0 = 0x 2010-08-30 11:43:31 [23161] [9] DEBUG: sequence_number: 2 = 0x0002 2010-08-30 11:43:31 [23161] [9] DEBUG: SMPP PDU dump ends. 2010-08-30 11:43:31 [23161] [9] DEBUG: SMPP[smsc4]: throughput (0.00,300.00) 2010-08-30 11:43:41 [23161] [6] DEBUG: SMPP[smsc1]: Got PDU: 2010-08-30 11:43:41 [23161] [6] DEBUG: SMPP PDU 0x9374668 dump: 2010-08-30 11:43:41 [23161] [6] DEBUG: type_name: enquire_link 2010-08-30 11:43:41 [23161] [6] DEBUG: command_id: 21 = 0x0015 2010-08-30 11:43:41 [23161] [6] DEBUG: command_status: 0 = 0x 2010-08-30 11:43:41 [23161] [6] DEBUG: sequence_number: 2 = 0x0002 2010-08-30 11:43:41 [23161] [6] DEBUG: SMPP PDU dump ends. 2010-08-30 11:43:41 [23161] [6] DEBUG: SMPP[smsc1]: Sending PDU: 2010-08-30 11:43:41 [23161] [6] DEBUG: SMPP PDU 0x9374748 dump: 2010-08-30 11:43:41 [23161] [6] DEBUG: type_name: enquire_link_resp 2010-08-30 11:43:41 [23161] [6] DEBUG: command_id: 2147483669 = 0x8015 2010-08-30 11:43:41 [23161] [6] DEBUG: command_status: 0 = 0x 2010-08-30 11:43:41 [23161] [6] DEBUG: sequence_number: 2 = 0x0002 2010-08-30 11:43:41 [23161] [6] DEBUG: SMPP PDU dump ends. 2010-08-30 11:43:41 [23161] [8] DEBUG: SMPP[smsc3]: Got PDU: 2010-08-30 11:43:41 [23161] [8] DEBUG: SMPP PDU 0x9374668 dump: 2010-08-30 11:43:41 [23161] [8] DEBUG: type_name: enquire_link 2010-08-30 11:43:41 [23161] [8] DEBUG: command_id: 21 = 0x0015 2010-08-30 11:43:41 [23161] [8] DEBUG: command_status: 0 = 0x 2010-08-30 11:43:41 [23161] [8] DEBUG: sequence_number: 2 = 0x0002 2010-08-30 11:43:41 [23161] [8] DEBUG: SMPP PDU dump ends. 2010-08-30 11:43:41 [23161] [8] DEBUG: SMPP[smsc3]: Sending PDU: 2010-08-30 11:43:41 [23161] [8] DEBUG: SMPP PDU 0x9374748 dump: 2010-08-30 11:43:41 [23161] [8] DEBUG: type_name: enquire_link_resp 2010-08-30 11:43:41 [23161] [8] DEBUG: command_id: 2147483669 = 0x8015 2010-08-30 11:43:41 [23161] [8] DEBUG: command_status: 0 = 0x 2010-08-30 11:43:41 [23161] [8] DEBUG: sequence_number: 2 = 0x0002 2010-08-30 11:43:41 [23161] [8] DEBUG: SMPP PDU dump ends. 2010-08-30 11:43:41 [23161] [9] DEBUG: SMPP[smsc4]: throughput (0.00,300.00) 2010-08-30 11:43:41 [23161] [9] DEBUG: SMPP[smsc4]: Got PDU: 2010-08-30 11:43:41 [23161] [9] DEBUG: SMPP PDU 0x9374668 dump: 2010-08-30 11:43:41 [23161] [9] DEBUG: type_name: enquire_link 2010-08-30 11:43:41 [23161] [9] DEBUG: command_id: 21 = 0x0015
Re: Nokia N73
Hi All, Anyone at all who used a Nokia N93 or N95 or N97 that can share their config with me? If the phones work on minicom and vwdial, am I correct to assume they should work with kannel as well? but need the correct init string? thanks, Zak -Original Message- From: Gjergji Guri gjergji.g...@facilization.com To: Zak xi...@netscape.net Cc: nbalka...@gmail.com; users@kannel.org Sent: Sun, Aug 29, 2010 10:24 am Subject: Re: Nokia N73 Hi Zak, Have you checked the init string? you can use wvdialconf from the command prompt to find out the inits string of your modem. Are you able to send SMS using the AT commands. You can use minicom program. Cheers, Gjergji On Sun, Aug 29, 2010 at 10:32 AM, Zak xi...@netscape.net wrote: Here's more log from kannel: 2010-08-28 21:28:41 [4145] [0] INFO: Debug_lvl = 1, log_file = none, log_lvl = 0 2010-08-28 21:28:41 [4145] [0] WARNING: DLR: using default 'internal' for storage type. 2010-08-28 21:28:41 [4145] [0] INFO: DLR using storage type: internal 2010-08-28 21:28:41 [4145] [0] INFO: Added logfile `/usr/local/kannel/logs/kannel.log' with level `0'. 2010-08-28 21:28:41 [4145] [0] INFO: Started access logfile `/usr/local/kannel/logs/core_access.log'. 2010-08-28 21:28:41 [4145] [0] INFO: HTTP: Opening server at port 13000. 2010-08-28 21:28:41 [4145] [0] INFO: BOXC: 'smsbox-max-pending' not set, using default (100). 2010-08-28 21:28:41 [4145] [0] INFO: Set SMS resend frequency to 60 seconds. 2010-08-28 21:28:41 [4145] [0] INFO: SMS resend retry set to unlimited. 2010-08-28 21:28:41 [4145] [0] INFO: DLR rerouting for smsc id modem disabled. 2010-08-28 21:28:41 [4145] [0] INFO: Added logfile `/usr/local/kannel/logs/modem.log' with level `1'. 2010-08-28 21:28:41 [4145] [0] INFO: AT2[modem]: configuration shows modemtype Nokia 2010-08-28 21:28:41 [4145] [0] INFO: AT2[modem]: read modem definition for Nokia 2010-08-28 21:28:41 [4145] [0] INFO: 2010-08-28 21:28:41 [4145] [0] INFO: Kannel bearerbox II version 1.4.3 starting 2010-08-28 21:28:41 [4145] [0] INFO: MAIN: Start-up done, entering mainloop 2010-08-28 21:28:41 [4145] [6] INFO: Logging thread `6' to logfile `/usr/local/kannel/logs/modem.log' with level `1'. 2010-08-28 21:28:51 [4145] [0] WARNING: Killing signal or HTTP admin command received, shutting down... 2010-08-28 21:28:54 [4145] [0] INFO: All flow threads have died, killing core 2010-08-28 21:28:54 [4145] [0] INFO: Total WDP messages: received 0, sent 0 2010-08-28 21:28:54 [4145] [0] INFO: Total SMS messages: received 0, sent 0 -Original Message- From: Nikos Balkanas nbalka...@gmail.com To: users@kannel.org; Zak xi...@netscape.net Sent: Sun, Aug 29, 2010 1:24 am Subject: Re: Nokia N73 Please repost same logs at maximum detail. BR, Nikos - Original Message - From: Zak To: users@kannel.org Sent: Saturday, August 28, 2010 11:43 PM Subject: Nokia N73 Hi All, I have a Nokia N73 that I could use to send SMS with minicom and also managed to get the init string using wvdial. But not been able to use kannel to get it send or receive SMS. The log from kannel is below and it just keeps on openning and closing device. 2010-08-28 21:28:41 [4145] [6] INFO: AT2[modem]: opening device 2010-08-28 21:28:42 [4145] [6] INFO: AT2[modem]: Logging in 2010-08-28 21:28:42 [4145] [6] INFO: AT2[modem]: init device 2010-08-28 21:28:42 [4145] [6] INFO: AT2[modem]: speed set to 460800 2010-08-28 21:28:43 [4145] [6] INFO: AT2[modem]: AT SMSC successfully opened. 2010-08-28 21:28:45 [4145] [6] INFO: AT2[modem]: Closing device 2010-08-28 21:28:45 [4145] [6] ERROR: AT2[modem]: Couldn't connect (retrying in 10 seconds). My modem config is: group = modems id = Nokia name = Nokia detect-string = Nokia Mobile Phones detect-string2 = N93 need-sleep = true init-string=ATZ enable-mms = true and SMSC group = smsc smsc = at smsc-id = modem modemtype = Nokia device = /dev/ttyACM0 speed = 460800 sim-buffering = true keepalive = 180 idle-timeout = 160 denied-prefix = 633;213;286;200;633;8001;277 log-file = /usr/local/kannel/logs/modem.log log-level=1 My wvdialconf file generated: [Dialer Defaults] Modem = /dev/ttyACM0 Baud = 460800 Init1 = ATZ Init2 = ATQ0 V1 E1 S0=0 C1 D2 +FCLASS=0 ISDN = 0 Modem Type = USB Modem ; Phone = Target Phone Number ; Username = Your Login Name ; Password = Your Password Any help appreciated. Thanks, Zak
Re: Nokia N73
Hello Zak, What's report 'AT+CNMI' command when using your mobile with minicom ? My Nokia gives the following output (Nokia 6230) *AT+CNMI=? +CNMI: (0-2),(0-3),(0,2,3),(0-2),(0,1) OK* If your gives ERROR then I think you won't be able to use it with Kannel BR, Emmanuel 2010/8/30 Zak xi...@netscape.net Hi All, Anyone at all who used a Nokia N93 or N95 or N97 that can share their config with me? If the phones work on minicom and vwdial, am I correct to assume they should work with kannel as well? but need the correct init string? thanks, Zak -Original Message- From: Gjergji Guri gjergji.g...@facilization.com To: Zak xi...@netscape.net Cc: nbalka...@gmail.com; users@kannel.org Sent: Sun, Aug 29, 2010 10:24 am Subject: Re: Nokia N73 Hi Zak, Have you checked the init string? you can use wvdialconf from the command prompt to find out the inits string of your modem. Are you able to send SMS using the AT commands. You can use minicom program. Cheers, Gjergji On Sun, Aug 29, 2010 at 10:32 AM, Zak xi...@netscape.net wrote: Here's more log from kannel: 2010-08-28 21:28:41 [4145] [0] INFO: Debug_lvl = 1, log_file = none, log_lvl = 0 2010-08-28 21:28:41 [4145] [0] WARNING: DLR: using default 'internal' for storage type. 2010-08-28 21:28:41 [4145] [0] INFO: DLR using storage type: internal 2010-08-28 21:28:41 [4145] [0] INFO: Added logfile `/usr/local/kannel/logs/kannel.log' with level `0'. 2010-08-28 21:28:41 [4145] [0] INFO: Started access logfile `/usr/local/kannel/logs/core_access.log'. 2010-08-28 21:28:41 [4145] [0] INFO: HTTP: Opening server at port 13000. 2010-08-28 21:28:41 [4145] [0] INFO: BOXC: 'smsbox-max-pending' not set, using default (100). 2010-08-28 21:28:41 [4145] [0] INFO: Set SMS resend frequency to 60 seconds. 2010-08-28 21:28:41 [4145] [0] INFO: SMS resend retry set to unlimited. 2010-08-28 21:28:41 [4145] [0] INFO: DLR rerouting for smsc id modem disabled. 2010-08-28 21:28:41 [4145] [0] INFO: Added logfile `/usr/local/kannel/logs/modem.log' with level `1'. 2010-08-28 21:28:41 [4145] [0] INFO: AT2[modem]: configuration shows modemtype Nokia 2010-08-28 21:28:41 [4145] [0] INFO: AT2[modem]: read modem definition for Nokia 2010-08-28 21:28:41 [4145] [0] INFO: 2010-08-28 21:28:41 [4145] [0] INFO: Kannel bearerbox II version 1.4.3 starting 2010-08-28 21:28:41 [4145] [0] INFO: MAIN: Start-up done, entering mainloop 2010-08-28 21:28:41 [4145] [6] INFO: Logging thread `6' to logfile `/usr/local/kannel/logs/modem.log' with level `1'. 2010-08-28 21:28:51 [4145] [0] WARNING: Killing signal or HTTP admin command received, shutting down... 2010-08-28 21:28:54 [4145] [0] INFO: All flow threads have died, killing core 2010-08-28 21:28:54 [4145] [0] INFO: Total WDP messages: received 0, sent 0 2010-08-28 21:28:54 [4145] [0] INFO: Total SMS messages: received 0, sent 0 -Original Message- From: Nikos Balkanas nbalka...@gmail.com To: users@kannel.org; Zak xi...@netscape.net Sent: Sun, Aug 29, 2010 1:24 am Subject: Re: Nokia N73 Please repost same logs at maximum detail. BR, Nikos - Original Message - From: Zak To: users@kannel.org Sent: Saturday, August 28, 2010 11:43 PM Subject: Nokia N73 Hi All, I have a Nokia N73 that I could use to send SMS with minicom and also managed to get the init string using wvdial. But not been able to use kannel to get it send or receive SMS. The log from kannel is below and it just keeps on openning and closing device. 2010-08-28 21:28:41 [4145] [6] INFO: AT2[modem]: opening device 2010-08-28 21:28:42 [4145] [6] INFO: AT2[modem]: Logging in 2010-08-28 21:28:42 [4145] [6] INFO: AT2[modem]: init device 2010-08-28 21:28:42 [4145] [6] INFO: AT2[modem]: speed set to 460800 2010-08-28 21:28:43 [4145] [6] INFO: AT2[modem]: AT SMSC successfully opened. 2010-08-28 21:28:45 [4145] [6] INFO: AT2[modem]: Closing device 2010-08-28 21:28:45 [4145] [6] ERROR: AT2[modem]: Couldn't connect (retrying in 10 seconds). My modem config is: group = modems id = Nokia name = Nokia detect-string = Nokia Mobile Phones detect-string2 = N93 need-sleep = true init-string=ATZ enable-mms = true and SMSC group = smsc smsc = at smsc-id = modem modemtype = Nokia device = /dev/ttyACM0 speed = 460800 sim-buffering = true keepalive = 180 idle-timeout = 160 denied-prefix = 633;213;286;200;633;8001;277 log-file = /usr/local/kannel/logs/modem.log log-level=1 My wvdialconf file generated: [Dialer Defaults] Modem = /dev/ttyACM0 Baud = 460800 Init1 = ATZ Init2 = ATQ0 V1 E1 S0=0 C1 D2 +FCLASS=0 ISDN = 0 Modem Type = USB Modem ; Phone = Target Phone Number ; Username = Your Login Name ; Password = Your Password Any help appreciated. Thanks, Zak
Re: Nokia N73
Hi Emmanuel, Mine gives Error when I do AT+CNMI. Is your Nokia 6230 working fine for both sending/receiving SMS? -Original Message- From: Emmanuel CHANSON emmanuelchan...@gmail.com To: Zak xi...@netscape.net Cc: gjergji.g...@facilization.com; users@kannel.org Sent: Mon, Aug 30, 2010 11:19 am Subject: Re: Nokia N73 Hello Zak, What's report 'AT+CNMI' command when using your mobile with minicom ? My Nokia gives the following output (Nokia 6230) AT+CNMI=? +CNMI: (0-2),(0-3),(0,2,3),(0-2),(0,1) OK If your gives ERROR then I think you won't be able to use it with Kannel BR, Emmanuel 2010/8/30 Zak xi...@netscape.net Hi All, Anyone at all who used a Nokia N93 or N95 or N97 that can share their config with me? If the phones work on minicom and vwdial, am I correct to assume they should work with kannel as well? but need the correct init string? thanks, Zak -Original Message- From: Gjergji Guri gjergji.g...@facilization.com To: Zak xi...@netscape.net Cc: nbalka...@gmail.com; users@kannel.org Sent: Sun, Aug 29, 2010 10:24 am Subject: Re: Nokia N73 Hi Zak, Have you checked the init string? you can use wvdialconf from the command prompt to find out the inits string of your modem. Are you able to send SMS using the AT commands. You can use minicom program. Cheers, Gjergji On Sun, Aug 29, 2010 at 10:32 AM, Zak xi...@netscape.net wrote: Here's more log from kannel: 2010-08-28 21:28:41 [4145] [0] INFO: Debug_lvl = 1, log_file = none, log_lvl = 0 2010-08-28 21:28:41 [4145] [0] WARNING: DLR: using default 'internal' for storage type. 2010-08-28 21:28:41 [4145] [0] INFO: DLR using storage type: internal 2010-08-28 21:28:41 [4145] [0] INFO: Added logfile `/usr/local/kannel/logs/kannel.log' with level `0'. 2010-08-28 21:28:41 [4145] [0] INFO: Started access logfile `/usr/local/kannel/logs/core_access.log'. 2010-08-28 21:28:41 [4145] [0] INFO: HTTP: Opening server at port 13000. 2010-08-28 21:28:41 [4145] [0] INFO: BOXC: 'smsbox-max-pending' not set, using default (100). 2010-08-28 21:28:41 [4145] [0] INFO: Set SMS resend frequency to 60 seconds. 2010-08-28 21:28:41 [4145] [0] INFO: SMS resend retry set to unlimited. 2010-08-28 21:28:41 [4145] [0] INFO: DLR rerouting for smsc id modem disabled. 2010-08-28 21:28:41 [4145] [0] INFO: Added logfile `/usr/local/kannel/logs/modem.log' with level `1'. 2010-08-28 21:28:41 [4145] [0] INFO: AT2[modem]: configuration shows modemtype Nokia 2010-08-28 21:28:41 [4145] [0] INFO: AT2[modem]: read modem definition for Nokia 2010-08-28 21:28:41 [4145] [0] INFO: 2010-08-28 21:28:41 [4145] [0] INFO: Kannel bearerbox II version 1.4.3 starting 2010-08-28 21:28:41 [4145] [0] INFO: MAIN: Start-up done, entering mainloop 2010-08-28 21:28:41 [4145] [6] INFO: Logging thread `6' to logfile `/usr/local/kannel/logs/modem.log' with level `1'. 2010-08-28 21:28:51 [4145] [0] WARNING: Killing signal or HTTP admin command received, shutting down... 2010-08-28 21:28:54 [4145] [0] INFO: All flow threads have died, killing core 2010-08-28 21:28:54 [4145] [0] INFO: Total WDP messages: received 0, sent 0 2010-08-28 21:28:54 [4145] [0] INFO: Total SMS messages: received 0, sent 0 -Original Message- From: Nikos Balkanas nbalka...@gmail.com To: users@kannel.org; Zak xi...@netscape.net Sent: Sun, Aug 29, 2010 1:24 am Subject: Re: Nokia N73 Please repost same logs at maximum detail. BR, Nikos - Original Message - From: Zak To: users@kannel.org Sent: Saturday, August 28, 2010 11:43 PM Subject: Nokia N73 Hi All, I have a Nokia N73 that I could use to send SMS with minicom and also managed to get the init string using wvdial. But not been able to use kannel to get it send or receive SMS. The log from kannel is below and it just keeps on openning and closing device. 2010-08-28 21:28:41 [4145] [6] INFO: AT2[modem]: opening device 2010-08-28 21:28:42 [4145] [6] INFO: AT2[modem]: Logging in 2010-08-28 21:28:42 [4145] [6] INFO: AT2[modem]: init device 2010-08-28 21:28:42 [4145] [6] INFO: AT2[modem]: speed set to 460800 2010-08-28 21:28:43 [4145] [6] INFO: AT2[modem]: AT SMSC successfully opened. 2010-08-28 21:28:45 [4145] [6] INFO: AT2[modem]: Closing device 2010-08-28 21:28:45 [4145] [6] ERROR: AT2[modem]: Couldn't connect (retrying in 10 seconds). My modem config is: group = modems id = Nokia name = Nokia detect-string = Nokia Mobile Phones detect-string2 = N93 need-sleep = true init-string=ATZ enable-mms = true and SMSC group = smsc smsc = at smsc-id = modem modemtype = Nokia device = /dev/ttyACM0 speed = 460800 sim-buffering = true keepalive = 180 idle-timeout = 160 denied-prefix = 633;213;286;200;633;8001;277 log-file = /usr/local/kannel/logs/modem.log log-level=1 My wvdialconf file generated: [Dialer Defaults] Modem = /dev/ttyACM0 Baud = 460800 Init1 = ATZ Init2 = ATQ0 V1 E1 S0=0 C1 D2
Re: Nokia N73
Yes it works perfectly with Kannel for incoming and outgoing SMS. For yours as I said in a previous post for a N70: *For newer models of Nokia phones, e.g., N70, N80, the +CNMI is not supported, and you have no way of detecting incoming SMS. *from this urlhttp://webcache.googleusercontent.com/search?q=cache:ILAJeyI50cAJ:www.codeproject.com/KB/vb/phonesmsrecv.aspx+nokia+Nseries+at%2Bcnmicd=4hl=frct=clnkgl=fr * *I noticed that many nSeries phones does not support AT+CNMI command ie can not forward SMS to Kannel. Maybe someone can confirm this ? Regards, Emmanuel 2010/8/30 Zak xi...@netscape.net Hi Emmanuel, Mine gives Error when I do AT+CNMI. Is your Nokia 6230 working fine for both sending/receiving SMS? -Original Message- From: Emmanuel CHANSON emmanuelchan...@gmail.com To: Zak xi...@netscape.net Cc: gjergji.g...@facilization.com; users@kannel.org Sent: Mon, Aug 30, 2010 11:19 am Subject: Re: Nokia N73 Hello Zak, What's report 'AT+CNMI' command when using your mobile with minicom ? My Nokia gives the following output (Nokia 6230) *AT+CNMI=? +CNMI: (0-2),(0-3),(0,2,3),(0-2),(0,1) OK* If your gives ERROR then I think you won't be able to use it with Kannel BR, Emmanuel 2010/8/30 Zak xi...@netscape.net Hi All, Anyone at all who used a Nokia N93 or N95 or N97 that can share their config with me? If the phones work on minicom and vwdial, am I correct to assume they should work with kannel as well? but need the correct init string? thanks, Zak -Original Message- From: Gjergji Guri gjergji.g...@facilization.com To: Zak xi...@netscape.net Cc: nbalka...@gmail.com; users@kannel.org Sent: Sun, Aug 29, 2010 10:24 am Subject: Re: Nokia N73 Hi Zak, Have you checked the init string? you can use wvdialconf from the command prompt to find out the inits string of your modem. Are you able to send SMS using the AT commands. You can use minicom program. Cheers, Gjergji On Sun, Aug 29, 2010 at 10:32 AM, Zak xi...@netscape.net wrote: Here's more log from kannel: 2010-08-28 21:28:41 [4145] [0] INFO: Debug_lvl = 1, log_file = none, log_lvl = 0 2010-08-28 21:28:41 [4145] [0] WARNING: DLR: using default 'internal' for storage type. 2010-08-28 21:28:41 [4145] [0] INFO: DLR using storage type: internal 2010-08-28 21:28:41 [4145] [0] INFO: Added logfile `/usr/local/kannel/logs/kannel.log' with level `0'. 2010-08-28 21:28:41 [4145] [0] INFO: Started access logfile `/usr/local/kannel/logs/core_access.log'. 2010-08-28 21:28:41 [4145] [0] INFO: HTTP: Opening server at port 13000. 2010-08-28 21:28:41 [4145] [0] INFO: BOXC: 'smsbox-max-pending' not set, using default (100). 2010-08-28 21:28:41 [4145] [0] INFO: Set SMS resend frequency to 60 seconds. 2010-08-28 21:28:41 [4145] [0] INFO: SMS resend retry set to unlimited. 2010-08-28 21:28:41 [4145] [0] INFO: DLR rerouting for smsc id modem disabled. 2010-08-28 21:28:41 [4145] [0] INFO: Added logfile `/usr/local/kannel/logs/modem.log' with level `1'. 2010-08-28 21:28:41 [4145] [0] INFO: AT2[modem]: configuration shows modemtype Nokia 2010-08-28 21:28:41 [4145] [0] INFO: AT2[modem]: read modem definition for Nokia 2010-08-28 21:28:41 [4145] [0] INFO: 2010-08-28 21:28:41 [4145] [0] INFO: Kannel bearerbox II version 1.4.3 starting 2010-08-28 21:28:41 [4145] [0] INFO: MAIN: Start-up done, entering mainloop 2010-08-28 21:28:41 [4145] [6] INFO: Logging thread `6' to logfile `/usr/local/kannel/logs/modem.log' with level `1'. 2010-08-28 21:28:51 [4145] [0] WARNING: Killing signal or HTTP admin command received, shutting down... 2010-08-28 21:28:54 [4145] [0] INFO: All flow threads have died, killing core 2010-08-28 21:28:54 [4145] [0] INFO: Total WDP messages: received 0, sent 0 2010-08-28 21:28:54 [4145] [0] INFO: Total SMS messages: received 0, sent 0 -Original Message- From: Nikos Balkanas nbalka...@gmail.com To: users@kannel.org; Zak xi...@netscape.net Sent: Sun, Aug 29, 2010 1:24 am Subject: Re: Nokia N73 Please repost same logs at maximum detail. BR, Nikos - Original Message - From: Zak To: users@kannel.org Sent: Saturday, August 28, 2010 11:43 PM Subject: Nokia N73 Hi All, I have a Nokia N73 that I could use to send SMS with minicom and also managed to get the init string using wvdial. But not been able to use kannel to get it send or receive SMS. The log from kannel is below and it just keeps on openning and closing device. 2010-08-28 21:28:41 [4145] [6] INFO: AT2[modem]: opening device 2010-08-28 21:28:42 [4145] [6] INFO: AT2[modem]: Logging in 2010-08-28 21:28:42 [4145] [6] INFO: AT2[modem]: init device 2010-08-28 21:28:42 [4145] [6] INFO: AT2[modem]: speed set to 460800 2010-08-28 21:28:43 [4145] [6] INFO: AT2[modem]: AT SMSC successfully opened. 2010-08-28 21:28:45 [4145] [6] INFO: AT2[modem]: Closing device 2010-08-28 21:28:45 [4145] [6] ERROR:
Deliver_sm
Hi List, i habe bit confusion in my case.I see submit_sm and submit_sm_resp in the log but not deliver_sm. Can it be a problem with my configuration or carrier has not enabled it.How ever my message is successfully delivered to the destination mobile.i m using HTTP post to send message and dlr type default(internal) Br daf -- View this message in context: http://old.nabble.com/Deliver_sm-tp29571489p29571489.html Sent from the Kannel - User mailing list archive at Nabble.com.
Using kannel
and also managed to get the init string using wvdial. But not been able to use kannel to get it send or receive SMS. The log from kannel is below and it just keeps on openning and closing device. 2010-08-28 21:28:41 [4145] [6] INFO: AT2[modem]: opening device 2010-08-28 21:28:42 [4145] [6] INFO: AT2[modem]: Logging in 2010-08-28 21:28:42 [4145] [6] INFO: AT2[modem]: init device 2010-08-28 21:28:42 [4145] [6] INFO: AT2[modem]: speed set to 460800 2010-08-28 21:28:43 [4145] [6] INFO: AT2[modem]: AT SMSC successfully opened. 2010-08-28 21:28:45 [4145] [6] INFO: AT2[modem]: Closing device 2010-08-28 21:28:45 [4145] [6] ERROR: AT2[modem]: Couldn't connect (retrying in 10 seconds). My modem config is: group = modems id = Nokia name = Nokia detect-string = Nokia Mobile Phones detect-string2 = N93 need-sleep = true init-string=ATZ enable-mms = true and SMSC group = smsc smsc = at smsc-id = modem modemtype = Nokia device = /dev/ttyACM0 speed = 460800 sim-buffering = true keepalive = 180 idle-timeout = 160 denied-prefix = 633;213;286;200;633;8001;277 log-file = /usr/local/kannel/logs/modem.log log-level=1 My wvdialconf file generated: [Dialer Defaults] Modem = /dev/ttyACM0 Baud = 460800 Init1 = ATZ Init2 = ATQ0 V1 E1 S0=0 C1 D2 +FCLASS=0 ISDN = 0 Modem Type = USB Modem ; Phone = Target Phone Number ; Username = Your Login Name ; Password = Your Password Any help appreciated. Thanks, Zak -- next part -- An HTML attachment was scrubbed... URL: http://www.kannel.org/pipermail/users/attachments/20100830/dc3001c2/attachment-0001.html -- Message: 2 Date: Mon, 30 Aug 2010 22:07:54 +1100 From: Emmanuel CHANSON emmanuelchan...@gmail.com To: Zak xi...@netscape.net Cc: users@kannel.org Subject: Re: Nokia N73 Message-ID: aanlktimfu73u4myv3h9xazay3ysykyutpc=nfpt42...@mail.gmail.com Content-Type: text/plain; charset=iso-8859-1 Yes it works perfectly with Kannel for incoming and outgoing SMS. For yours as I said in a previous post for a N70: *For newer models of Nokia phones, e.g., N70, N80, the +CNMI is not supported, and you have no way of detecting incoming SMS. *from this url http://webcache.googleusercontent.com/search?q=cache:ILAJeyI50cAJ:www.codeproject.com/KB/vb/phonesmsrecv.aspx+nokia+Nseries+at%2Bcnmicd=4hl=frct=clnkgl=fr * *I noticed that many nSeries phones does not support AT+CNMI command ie can not forward SMS to Kannel. Maybe someone can confirm this ? Regards, Emmanuel 2010/8/30 Zak xi...@netscape.net Hi Emmanuel, Mine gives Error when I do AT+CNMI. Is your Nokia 6230 working fine for both sending/receiving SMS? -Original Message- From: Emmanuel CHANSON emmanuelchan...@gmail.com To: Zak xi...@netscape.net Cc: gjergji.g...@facilization.com; users@kannel.org Sent: Mon, Aug 30, 2010 11:19 am Subject: Re: Nokia N73 Hello Zak, What's report 'AT+CNMI' command when using your mobile with minicom ? My Nokia gives the following output (Nokia 6230) *AT+CNMI=? +CNMI: (0-2),(0-3),(0,2,3),(0-2),(0,1) OK* If your gives ERROR then I think you won't be able to use it with Kannel BR, Emmanuel 2010/8/30 Zak xi...@netscape.net Hi All, Anyone at all who used a Nokia N93 or N95 or N97 that can share their config with me? If the phones work on minicom and vwdial, am I correct to assume they should work with kannel as well? but need the correct init string? thanks, Zak -Original Message- From: Gjergji Guri gjergji.g...@facilization.com To: Zak xi...@netscape.net Cc: nbalka...@gmail.com; users@kannel.org Sent: Sun, Aug 29, 2010 10:24 am Subject: Re: Nokia N73 Hi Zak, Have you checked the init string? you can use wvdialconf from the command prompt to find out the inits string of your modem. Are you able to send SMS using the AT commands. You can use minicom program. Cheers, Gjergji On Sun, Aug 29, 2010 at 10:32 AM, Zak xi...@netscape.net wrote: Here's more log from kannel: 2010-08-28 21:28:41 [4145] [0] INFO: Debug_lvl = 1, log_file = none, log_lvl = 0 2010-08-28 21:28:41 [4145] [0] WARNING: DLR: using default 'internal' for storage type. 2010-08-28 21:28:41 [4145] [0] INFO: DLR using storage type: internal 2010-08-28 21:28:41 [4145] [0] INFO: Added logfile `/usr/local/kannel/logs/kannel.log' with level `0'. 2010-08-28 21:28:41 [4145] [0] INFO: Started access logfile `/usr/local/kannel/logs/core_access.log'. 2010-08-28 21:28:41 [4145] [0] INFO: HTTP: Opening server at port 13000. 2010-08-28 21:28:41 [4145] [0] INFO: BOXC: 'smsbox-max-pending' not set, using default (100). 2010-08-28 21:28:41 [4145] [0] INFO: Set SMS resend frequency to 60 seconds. 2010-08-28 21:28:41 [4145] [0] INFO: SMS resend retry set to unlimited. 2010-08-28 21:28:41 [4145] [0] INFO
Re: Nokia N73
Thanks a lot. I think it's better for me to just get an old Nokia 6230 and work with that. Do you use a USB data cable for the Nokia 6230? And also could you share your modem and smsc config for it? Zak. -Original Message- From: Emmanuel CHANSON emmanuelchan...@gmail.com To: Zak xi...@netscape.net Cc: gjergji.g...@facilization.com; users@kannel.org Sent: Mon, Aug 30, 2010 12:07 pm Subject: Re: Nokia N73 Yes it works perfectly with Kannel for incoming and outgoing SMS. For yours as I said in a previous post for a N70: For newer models of Nokia phones, e.g., N70, N80, the +CNMI is not supported, and you have no way of detecting incoming SMS. from this url I noticed that many nSeries phones does not support AT+CNMI command ie can not forward SMS to Kannel. Maybe someone can confirm this ? Regards, Emmanuel 2010/8/30 Zak xi...@netscape.net Hi Emmanuel, Mine gives Error when I do AT+CNMI. Is your Nokia 6230 working fine for both sending/receiving SMS? -Original Message- From: Emmanuel CHANSON emmanuelchan...@gmail.com To: Zak xi...@netscape.net Cc: gjergji.g...@facilization.com; users@kannel.org Sent: Mon, Aug 30, 2010 11:19 am Subject: Re: Nokia N73 Hello Zak, What's report 'AT+CNMI' command when using your mobile with minicom ? My Nokia gives the following output (Nokia 6230) AT+CNMI=? +CNMI: (0-2),(0-3),(0,2,3),(0-2),(0,1) OK If your gives ERROR then I think you won't be able to use it with Kannel BR, Emmanuel 2010/8/30 Zak xi...@netscape.net Hi All, Anyone at all who used a Nokia N93 or N95 or N97 that can share their config with me? If the phones work on minicom and vwdial, am I correct to assume they should work with kannel as well? but need the correct init string? thanks, Zak -Original Message- From: Gjergji Guri gjergji.g...@facilization.com To: Zak xi...@netscape.net Cc: nbalka...@gmail.com; users@kannel.org Sent: Sun, Aug 29, 2010 10:24 am Subject: Re: Nokia N73 Hi Zak, Have you checked the init string? you can use wvdialconf from the command prompt to find out the inits string of your modem. Are you able to send SMS using the AT commands. You can use minicom program. Cheers, Gjergji On Sun, Aug 29, 2010 at 10:32 AM, Zak xi...@netscape.net wrote: Here's more log from kannel: 2010-08-28 21:28:41 [4145] [0] INFO: Debug_lvl = 1, log_file = none, log_lvl = 0 2010-08-28 21:28:41 [4145] [0] WARNING: DLR: using default 'internal' for storage type. 2010-08-28 21:28:41 [4145] [0] INFO: DLR using storage type: internal 2010-08-28 21:28:41 [4145] [0] INFO: Added logfile `/usr/local/kannel/logs/kannel.log' with level `0'. 2010-08-28 21:28:41 [4145] [0] INFO: Started access logfile `/usr/local/kannel/logs/core_access.log'. 2010-08-28 21:28:41 [4145] [0] INFO: HTTP: Opening server at port 13000. 2010-08-28 21:28:41 [4145] [0] INFO: BOXC: 'smsbox-max-pending' not set, using default (100). 2010-08-28 21:28:41 [4145] [0] INFO: Set SMS resend frequency to 60 seconds. 2010-08-28 21:28:41 [4145] [0] INFO: SMS resend retry set to unlimited. 2010-08-28 21:28:41 [4145] [0] INFO: DLR rerouting for smsc id modem disabled. 2010-08-28 21:28:41 [4145] [0] INFO: Added logfile `/usr/local/kannel/logs/modem.log' with level `1'. 2010-08-28 21:28:41 [4145] [0] INFO: AT2[modem]: configuration shows modemtype Nokia 2010-08-28 21:28:41 [4145] [0] INFO: AT2[modem]: read modem definition for Nokia 2010-08-28 21:28:41 [4145] [0] INFO: 2010-08-28 21:28:41 [4145] [0] INFO: Kannel bearerbox II version 1.4.3 starting 2010-08-28 21:28:41 [4145] [0] INFO: MAIN: Start-up done, entering mainloop 2010-08-28 21:28:41 [4145] [6] INFO: Logging thread `6' to logfile `/usr/local/kannel/logs/modem.log' with level `1'. 2010-08-28 21:28:51 [4145] [0] WARNING: Killing signal or HTTP admin command received, shutting down... 2010-08-28 21:28:54 [4145] [0] INFO: All flow threads have died, killing core 2010-08-28 21:28:54 [4145] [0] INFO: Total WDP messages: received 0, sent 0 2010-08-28 21:28:54 [4145] [0] INFO: Total SMS messages: received 0, sent 0 -Original Message- From: Nikos Balkanas nbalka...@gmail.com To: users@kannel.org; Zak xi...@netscape.net Sent: Sun, Aug 29, 2010 1:24 am Subject: Re: Nokia N73 Please repost same logs at maximum detail. BR, Nikos - Original Message - From: Zak To: users@kannel.org Sent: Saturday, August 28, 2010 11:43 PM Subject: Nokia N73 Hi All, I have a Nokia N73 that I could use to send SMS with minicom and also managed to get the init string using wvdial. But not been able to use kannel to get it send or receive SMS. The log from kannel is below and it just keeps on openning and closing device. 2010-08-28 21:28:41 [4145] [6] INFO: AT2[modem]: opening device 2010-08-28 21:28:42 [4145] [6] INFO: AT2[modem]: Logging in 2010-08-28 21:28:42 [4145] [6] INFO: AT2[modem]: init device 2010-08-28
Re: Nokia N73
On Mon, 2010-08-30 at 22:07, Emmanuel CHANSON wrote: Yes it works perfectly with Kannel for incoming and outgoing SMS. For yours as I said in a previous post for a N70: *For newer models of Nokia phones, e.g., N70, N80, the +CNMI is not supported, and you have no way of detecting incoming SMS. *from this urlhttp://webcache.googleusercontent.com/search?q=cache:ILAJeyI50cAJ:www.codeproject.com/KB/vb/phonesmsrecv.aspx+nokia+Nseries+at%2Bcnmicd=4hl=frct=clnkgl=fr * *I noticed that many nSeries phones does not support AT+CNMI command ie can not forward SMS to Kannel. Maybe someone can confirm this ? I just tested N900 with minicom and looks like it doesn't support +CNMI -- Kind regards, Milan -- Arvanta, IT Securityhttp://www.arvanta.net Please do not send me e-mail containing HTML code.
Re: Nokia N73
Yes USB cable, bluetooth should also work. Nokia 6230 config with Kannel: modem.conf: --- ... group = modems id = nokiaphone name = Nokia Phone detect-string = Nokia Mobile Phone init-string = AT+CNMI=1,2,0,2,0;+CMEE=1 need-sleep = true speed = 460800 keepalive-cmd = AT+CBC;+CSQ enable-mms = true message-storage = SM kannel.conf: -- ... # SMSC GSM group = smsc smsc = at #SMSC: NOKIA 6230 device = /dev/ttyACM0 smsc-id = nokiaphone modemtype = nokiaphone allowed-smsc-id = nokiaphone sms-center = +x #mynumber = x pin = validityperiod = 167 sim-buffering = true log-file = /var/log/kannel/smsc.log log-level = 0 include = /etc/kannel/modems.conf ... BR, Emmanuel 2010/8/30 Zak xi...@netscape.net Thanks a lot. I think it's better for me to just get an old Nokia 6230 and work with that. Do you use a USB data cable for the Nokia 6230? And also could you share your modem and smsc config for it? Zak. -Original Message- From: Emmanuel CHANSON emmanuelchan...@gmail.com To: Zak xi...@netscape.net Cc: gjergji.g...@facilization.com; users@kannel.org Sent: Mon, Aug 30, 2010 12:07 pm Subject: Re: Nokia N73 Yes it works perfectly with Kannel for incoming and outgoing SMS. For yours as I said in a previous post for a N70: *For newer models of Nokia phones, e.g., N70, N80, the +CNMI is not supported, and you have no way of detecting incoming SMS. *from this urlhttp://webcache.googleusercontent.com/search?q=cache:ILAJeyI50cAJ:www.codeproject.com/KB/vb/phonesmsrecv.aspx+nokia+Nseries+at%2Bcnmicd=4hl=frct=clnkgl=fr * *I noticed that many nSeries phones does not support AT+CNMI command ie can not forward SMS to Kannel. Maybe someone can confirm this ? Regards, Emmanuel 2010/8/30 Zak xi...@netscape.net Hi Emmanuel, Mine gives Error when I do AT+CNMI. Is your Nokia 6230 working fine for both sending/receiving SMS? -Original Message- From: Emmanuel CHANSON emmanuelchan...@gmail.com To: Zak xi...@netscape.net Cc: gjergji.g...@facilization.com; users@kannel.org Sent: Mon, Aug 30, 2010 11:19 am Subject: Re: Nokia N73 Hello Zak, What's report 'AT+CNMI' command when using your mobile with minicom ? My Nokia gives the following output (Nokia 6230) *AT+CNMI=? +CNMI: (0-2),(0-3),(0,2,3),(0-2),(0,1) OK* If your gives ERROR then I think you won't be able to use it with Kannel BR, Emmanuel 2010/8/30 Zak xi...@netscape.net Hi All, Anyone at all who used a Nokia N93 or N95 or N97 that can share their config with me? If the phones work on minicom and vwdial, am I correct to assume they should work with kannel as well? but need the correct init string? thanks, Zak -Original Message- From: Gjergji Guri gjergji.g...@facilization.com To: Zak xi...@netscape.net Cc: nbalka...@gmail.com; users@kannel.org Sent: Sun, Aug 29, 2010 10:24 am Subject: Re: Nokia N73 Hi Zak, Have you checked the init string? you can use wvdialconf from the command prompt to find out the inits string of your modem. Are you able to send SMS using the AT commands. You can use minicom program. Cheers, Gjergji On Sun, Aug 29, 2010 at 10:32 AM, Zak xi...@netscape.net wrote: Here's more log from kannel: 2010-08-28 21:28:41 [4145] [0] INFO: Debug_lvl = 1, log_file = none, log_lvl = 0 2010-08-28 21:28:41 [4145] [0] WARNING: DLR: using default 'internal' for storage type. 2010-08-28 21:28:41 [4145] [0] INFO: DLR using storage type: internal 2010-08-28 21:28:41 [4145] [0] INFO: Added logfile `/usr/local/kannel/logs/kannel.log' with level `0'. 2010-08-28 21:28:41 [4145] [0] INFO: Started access logfile `/usr/local/kannel/logs/core_access.log'. 2010-08-28 21:28:41 [4145] [0] INFO: HTTP: Opening server at port 13000. 2010-08-28 21:28:41 [4145] [0] INFO: BOXC: 'smsbox-max-pending' not set, using default (100). 2010-08-28 21:28:41 [4145] [0] INFO: Set SMS resend frequency to 60 seconds. 2010-08-28 21:28:41 [4145] [0] INFO: SMS resend retry set to unlimited. 2010-08-28 21:28:41 [4145] [0] INFO: DLR rerouting for smsc id modem disabled. 2010-08-28 21:28:41 [4145] [0] INFO: Added logfile `/usr/local/kannel/logs/modem.log' with level `1'. 2010-08-28 21:28:41 [4145] [0] INFO: AT2[modem]: configuration shows modemtype Nokia 2010-08-28 21:28:41 [4145] [0] INFO: AT2[modem]: read modem definition for Nokia 2010-08-28 21:28:41 [4145] [0] INFO: 2010-08-28 21:28:41 [4145] [0] INFO: Kannel bearerbox II version 1.4.3 starting 2010-08-28 21:28:41 [4145] [0] INFO: MAIN: Start-up done, entering mainloop 2010-08-28 21:28:41 [4145] [6] INFO: Logging thread `6' to logfile `/usr/local/kannel/logs/modem.log' with level `1'. 2010-08-28 21:28:51 [4145] [0] WARNING: Killing signal or HTTP admin command received, shutting down... 2010-08-28 21:28:54 [4145] [0] INFO: All flow threads have died, killing core 2010-08-28 21:28:54
Re: Nokia N73
Thanks again Emmanuel. -Original Message- From: Emmanuel CHANSON emmanuelchan...@gmail.com To: Zak xi...@netscape.net Cc: gjergji.g...@facilization.com; users@kannel.org Sent: Mon, Aug 30, 2010 12:25 pm Subject: Re: Nokia N73 Yes USB cable, bluetooth should also work. Nokia 6230 config with Kannel: modem.conf: --- ... group = modems id = nokiaphone name = Nokia Phone detect-string = Nokia Mobile Phone init-string = AT+CNMI=1,2,0,2,0;+CMEE=1 need-sleep = true speed = 460800 keepalive-cmd = AT+CBC;+CSQ enable-mms = true message-storage = SM kannel.conf: -- ... # SMSC GSM group = smsc smsc = at #SMSC: NOKIA 6230 device = /dev/ttyACM0 smsc-id = nokiaphone modemtype = nokiaphone allowed-smsc-id = nokiaphone sms-center = +x #mynumber = x pin = validityperiod = 167 sim-buffering = true log-file = /var/log/kannel/smsc.log log-level = 0 include = /etc/kannel/modems.conf ... BR, Emmanuel 2010/8/30 Zak xi...@netscape.net Thanks a lot. I think it's better for me to just get an old Nokia 6230 and work with that. Do you use a USB data cable for the Nokia 6230? And also could you share your modem and smsc config for it? Zak. -Original Message- From: Emmanuel CHANSON emmanuelchan...@gmail.com To: Zak xi...@netscape.net Cc: gjergji.g...@facilization.com; users@kannel.org Sent: Mon, Aug 30, 2010 12:07 pm Subject: Re: Nokia N73 Yes it works perfectly with Kannel for incoming and outgoing SMS. For yours as I said in a previous post for a N70: For newer models of Nokia phones, e.g., N70, N80, the +CNMI is not supported, and you have no way of detecting incoming SMS. from this url I noticed that many nSeries phones does not support AT+CNMI command ie can not forward SMS to Kannel. Maybe someone can confirm this ? Regards, Emmanuel 2010/8/30 Zak xi...@netscape.net Hi Emmanuel, Mine gives Error when I do AT+CNMI. Is your Nokia 6230 working fine for both sending/receiving SMS? -Original Message- From: Emmanuel CHANSON emmanuelchan...@gmail.com To: Zak xi...@netscape.net Cc: gjergji.g...@facilization.com; users@kannel.org Sent: Mon, Aug 30, 2010 11:19 am Subject: Re: Nokia N73 Hello Zak, What's report 'AT+CNMI' command when using your mobile with minicom ? My Nokia gives the following output (Nokia 6230) AT+CNMI=? +CNMI: (0-2),(0-3),(0,2,3),(0-2),(0,1) OK If your gives ERROR then I think you won't be able to use it with Kannel BR, Emmanuel 2010/8/30 Zak xi...@netscape.net Hi All, Anyone at all who used a Nokia N93 or N95 or N97 that can share their config with me? If the phones work on minicom and vwdial, am I correct to assume they should work with kannel as well? but need the correct init string? thanks, Zak -Original Message- From: Gjergji Guri gjergji.g...@facilization.com To: Zak xi...@netscape.net Cc: nbalka...@gmail.com; users@kannel.org Sent: Sun, Aug 29, 2010 10:24 am Subject: Re: Nokia N73 Hi Zak, Have you checked the init string? you can use wvdialconf from the command prompt to find out the inits string of your modem. Are you able to send SMS using the AT commands. You can use minicom program. Cheers, Gjergji On Sun, Aug 29, 2010 at 10:32 AM, Zak xi...@netscape.net wrote: Here's more log from kannel: 2010-08-28 21:28:41 [4145] [0] INFO: Debug_lvl = 1, log_file = none, log_lvl = 0 2010-08-28 21:28:41 [4145] [0] WARNING: DLR: using default 'internal' for storage type. 2010-08-28 21:28:41 [4145] [0] INFO: DLR using storage type: internal 2010-08-28 21:28:41 [4145] [0] INFO: Added logfile `/usr/local/kannel/logs/kannel.log' with level `0'. 2010-08-28 21:28:41 [4145] [0] INFO: Started access logfile `/usr/local/kannel/logs/core_access.log'. 2010-08-28 21:28:41 [4145] [0] INFO: HTTP: Opening server at port 13000. 2010-08-28 21:28:41 [4145] [0] INFO: BOXC: 'smsbox-max-pending' not set, using default (100). 2010-08-28 21:28:41 [4145] [0] INFO: Set SMS resend frequency to 60 seconds. 2010-08-28 21:28:41 [4145] [0] INFO: SMS resend retry set to unlimited. 2010-08-28 21:28:41 [4145] [0] INFO: DLR rerouting for smsc id modem disabled. 2010-08-28 21:28:41 [4145] [0] INFO: Added logfile `/usr/local/kannel/logs/modem.log' with level `1'. 2010-08-28 21:28:41 [4145] [0] INFO: AT2[modem]: configuration shows modemtype Nokia 2010-08-28 21:28:41 [4145] [0] INFO: AT2[modem]: read modem definition for Nokia 2010-08-28 21:28:41 [4145] [0] INFO: 2010-08-28 21:28:41 [4145] [0] INFO: Kannel bearerbox II version 1.4.3 starting 2010-08-28 21:28:41 [4145] [0] INFO: MAIN: Start-up done, entering mainloop 2010-08-28 21:28:41 [4145] [6] INFO: Logging thread `6' to logfile `/usr/local/kannel/logs/modem.log' with level `1'. 2010-08-28 21:28:51 [4145] [0] WARNING: Killing signal or HTTP admin command received, shutting down... 2010-08-28 21:28:54 [4145] [0] INFO: All flow threads
Re: Deliver_sm
You will see deliver_sm PDU-s whenever you send back from your mobile toward application. On Mon, Aug 30, 2010 at 1:14 PM, dafodil neo.tu...@yahoo.com wrote: Hi List, i habe bit confusion in my case.I see submit_sm and submit_sm_resp in the log but not deliver_sm. Can it be a problem with my configuration or carrier has not enabled it.How ever my message is successfully delivered to the destination mobile.i m using HTTP post to send message and dlr type default(internal) Br daf -- View this message in context: http://old.nabble.com/Deliver_sm-tp29571489p29571489.html Sent from the Kannel - User mailing list archive at Nabble.com.
Re: Deliver_sm
i should be also able to get delivery report when i m sending from HTTP/kannel. elthox wrote: You will see deliver_sm PDU-s whenever you send back from your mobile toward application. On Mon, Aug 30, 2010 at 1:14 PM, dafodil neo.tu...@yahoo.com wrote: Hi List, i habe bit confusion in my case.I see submit_sm and submit_sm_resp in the log but not deliver_sm. Can it be a problem with my configuration or carrier has not enabled it.How ever my message is successfully delivered to the destination mobile.i m using HTTP post to send message and dlr type default(internal) Br daf -- View this message in context: http://old.nabble.com/Deliver_sm-tp29571489p29571489.html Sent from the Kannel - User mailing list archive at Nabble.com. -- View this message in context: http://old.nabble.com/Deliver_sm-tp29571489p29571933.html Sent from the Kannel - User mailing list archive at Nabble.com.
Throughput setting not honored in smpp 34?
Hi, I am experiencing problems with SMPP 34 and throttling. My set up is the following; I am using ubuntu and dkpg -s kannel reveals: Architecture: amd64 Version: 1.4.3-0ubuntu2 I am connected to 3 different smsc's, all SMPP and all at version 3.4, SMSC A has unlimited messages/s SMSC B has 10 messages/s ( Throughput set to 6 after getting throttling errors at 10, but I am still getting errors ) SMSC C has 10 messages/s ( Throughput set to 6 after getting throttling errors at 10, but I am still getting errors ) I access these three from three different sendsms-user (a,b,c), they have forced-smsc set to A,B and C respectively. One of the three is seldom used(B), the other two are used depending on destination phone_nr. I am getting throttling errors in the logs, and if I check the frequency of sending_pdu this is what I get. 2010-08-30 14:03:08 [32738] [8] DEBUG: SMPP[C]: Sending PDU: 2010-08-30 14:03:08 [32738] [6] DEBUG: SMPP[A]: Sending PDU: 2010-08-30 14:03:08 [32738] [6] DEBUG: SMPP[A]: Sending PDU: 2010-08-30 14:03:08 [32738] [8] DEBUG: SMPP[C]: Sending PDU: 2010-08-30 14:03:08 [32738] [8] DEBUG: SMPP[C]: Sending PDU: 2010-08-30 14:03:08 [32738] [8] DEBUG: SMPP[C]: Sending PDU: 2010-08-30 14:03:08 [32738] [8] DEBUG: SMPP[C]: Sending PDU: 2010-08-30 14:03:08 [32738] [8] DEBUG: SMPP[C]: Sending PDU: 2010-08-30 14:03:08 [32738] [8] DEBUG: SMPP[C]: Sending PDU: 2010-08-30 14:03:08 [32738] [8] DEBUG: SMPP[C]: Sending PDU: 2010-08-30 14:03:08 [32738] [8] DEBUG: SMPP[C]: Sending PDU: 2010-08-30 14:03:08 [32738] [8] DEBUG: SMPP[C]: Sending PDU: 2010-08-30 14:03:08 [32738] [8] DEBUG: SMPP[C]: Sending PDU: 2010-08-30 14:03:08 [32738] [8] DEBUG: SMPP[C]: Sending PDU: 2010-08-30 14:03:08 [32738] [6] DEBUG: SMPP[A]: Sending PDU: 2010-08-30 14:03:08 [32738] [6] DEBUG: SMPP[A]: Sending PDU: 2010-08-30 14:03:08 [32738] [8] DEBUG: SMPP[C]: Sending PDU: 2010-08-30 14:03:08 [32738] [6] DEBUG: SMPP[A]: Sending PDU: 2010-08-30 14:03:08 [32738] [6] DEBUG: SMPP[A]: Sending PDU: 2010-08-30 14:03:08 [32738] [8] DEBUG: SMPP[C]: Sending PDU: during this second there are 6 sms sent to A ( which is ok, no throughput-limit is set ) and 14 sms sent to C which directly goes against througput which is set to 6( seen in the following row that it has accepted my throughput setting ) 2010-08-27 03:35:36 [15936] [0] INFO: Set throughput to 6.000 for smsc id C The setting for B ( and C ) is as following: group=smsc smsc=smpp smsc-id=B allowed-smsc-id=B throughput=6 interface-version=34 host=x.y.z.w port=xy system-id=asdasd smsc-password=asdasd system-type=client01 transceiver-mode=1 The setting for b( and c) is as following: group = sendsms-user username= password= user-deny-ip = *.*.*.* user-allow-ip = x.y.u.z max-messages = 10 concatenation = true forced-smsc = B Is there something I have missed? Please advice. // Totte
Re: Deliver_sm
Check and read about dlr-mask option. On Mon, Aug 30, 2010 at 1:14 PM, dafodil neo.tu...@yahoo.com wrote: Hi List, i habe bit confusion in my case.I see submit_sm and submit_sm_resp in the log but not deliver_sm. Can it be a problem with my configuration or carrier has not enabled it.How ever my message is successfully delivered to the destination mobile.i m using HTTP post to send message and dlr type default(internal) Br daf -- View this message in context: http://old.nabble.com/Deliver_sm-tp29571489p29571489.html Sent from the Kannel - User mailing list archive at Nabble.com.
Re: Re: Deliver_sm
Yes. They also come in the form of deliver_sm, but you must include dlr-mask and dlr-url in your request to sendsms. /eiler On 30/08/2010 14:17 dafodil neo.tu...@yahoo.com wrote: i should be also able to get delivery report when i m sending from HTTP/kannel. elthox wrote: You will see deliver_sm PDU-s whenever you send back from your mobile toward application. On Mon, Aug 30, 2010 at 1:14 PM, dafodil neo.tu...@yahoo.com wrote: Hi List, i habe bit confusion in my case.I see submit_sm and submit_sm_resp in the log but not deliver_sm. Can it be a problem with my configuration or carrier has not enabled it.How ever my message is successfully delivered to the destination mobile.i m using HTTP post to send message and dlr type default(internal) Br daf -- View this message in context: http://old.nabble.com/Deliver_sm-tp29571489p29571489.html Sent from the Kannel - User mailing list archive at Nabble.com.
help on huawei e160 gsm modem
Hey folks am happy with the help you have accorded me this far but then you told me to post my configuration file as well as the error from the log file and i have done exactly that and i hope you will help me remedy the problem of error of CMS:321 as shown in the log file below and if possible post me the necessary fix to my problem. Finally i have read the user guide time and again on the part of the mysql database in that i want to link kannel which i have installed on my fedora 13 with the MYSQL server within fedora.But considering that i installed kannel from an rpm package,how possible is it that i will easily link it with the database. If am way wide provide me with the neccessary remedy that will enable me to send the messages i receive directly into the database tables of the mysql server.If anything you can post the neccesssary sites that i can visit inorder to succesfully configure kannel with mysql support considering that i have already installed kannel from an rpm package. #CAMCOM MOBILE CONFIGURATION FILE group = core admin-port = 13000 admin-password = mac status-password = henry admin-deny-ip = *.*.*.* admin-allow-ip = 127.0.0.1 smsbox-port = 13001 box-deny-ip = *.*.*.* box-allow-ip = 127.0.0.1 wdp-interface-name = * log-file = /home/mac/bearerbox.log log-level = 1 access-log = /home/mac/kannel.access dlr-storage = internal group = smsc smsc = at port = 1 modemtype = auto device = /dev/ttyUSB0 my-number = 0888959802 log-level = 0 connect-allow-ip = 127.0.0.1 sim-buffering = true group = modems id = huawei_e160 name = huawei_e160 detect-string = huawei init-string = ATZ init-string = ATQ0 V1 E1 S0=0 C1 D2 +FCLASS=0 init-string = AT+CNMI= 2,0,0,2,0 #init-string = AT+CPMS=ME #init-string = AT+CMGL=ALL message-storage = sm speed = 9600 group = smsbox bearerbox-host = localhost sendsms-port = 13013 sendsms-chars = 0123456789 global-sender = 0888959802 access-log = /home/mac/kannel.access log-file = /home/mac/smsbox.log log-level = 0 group = sendsms-user username = 123 password = 123 max-messages = 1 concatenation = true group = sms-service keyword = hi text = singly configured for the world of poly! #default service group = sms-service keyword = default text = INSTANT REPLY FROM KANNEL WITH COURTESY OF MAC!!!THE KANNEL IS A BEAUTIFUL TECHNOLOGY..WE WILL SOON GET THERE #group = smsc #smsc = fake #smsc-id = FAKE #host = localhost #port = 1 [r...@localhost ~]# /usr/sbin/bearerbox -v 1 /etc/kannel.conf [1] 5335 [r...@localhost ~]# 2010-08-30 11:06:04 [5335] [0] INFO: Debug_lvl = 1, log_file = none, log_lvl = 0 2010-08-30 11:06:04 [5335] [0] INFO: DLR using storage type: internal 2010-08-30 11:06:04 [5335] [0] INFO: Added logfile `/home/mac/bearerbox.log' with level `1'. 2010-08-30 11:06:04 [5335] [0] INFO: Started access logfile `/home/mac/kannel.access'. 2010-08-30 11:06:04 [5335] [0] INFO: HTTP: Opening server at port 13000. 2010-08-30 11:06:04 [5335] [0] INFO: BOXC: 'smsbox-max-pending' not set, using default (100). 2010-08-30 11:06:04 [5335] [0] INFO: Set SMS resend frequency to 60 seconds. 2010-08-30 11:06:04 [5335] [0] INFO: SMS resend retry set to unlimited. 2010-08-30 11:06:04 [5335] [0] INFO: DLR rerouting for smsc id (null) disabled. 2010-08-30 11:06:04 [5335] [0] INFO: AT2[/dev/ttyUSB0]: configuration doesn't show modemtype. will autodetect 2010-08-30 11:06:04 [5335] [0] INFO: Adding interface * 2010-08-30 11:06:04 [5335] [0] ERROR: Missing wapbox-port variable, cannot start WAP 2010-08-30 11:06:04 [5335] [0] INFO: 2010-08-30 11:06:04 [5335] [0] INFO: Kannel bearerbox II version 1.4.3 starting 2010-08-30 11:06:04 [5335] [0] INFO: MAIN: Start-up done, entering mainloop 2010-08-30 11:06:04 [5335] [6] INFO: AT2[/dev/ttyUSB0]: opening device 2010-08-30 11:06:05 [5335] [6] INFO: AT2[/dev/ttyUSB0]: speed set to 115200 2010-08-30 11:06:07 [5335] [6] INFO: AT2[/dev/ttyUSB0]: Closing device 2010-08-30 11:06:07 [5335] [6] INFO: AT2[/dev/ttyUSB0]: detect speed is 115200 2010-08-30 11:06:07 [5335] [6] INFO: AT2[/dev/ttyUSB0]: opening device 2010-08-30 11:06:08 [5335] [6] INFO: AT2[/dev/ttyUSB0]: speed set to 115200 2010-08-30 11:06:10 [5335] [6] INFO: AT2[/dev/ttyUSB0]: Closing device 2010-08-30 11:06:10 [5335] [6] INFO: AT2[/dev/ttyUSB0]: opening device 2010-08-30 11:06:10 [5335] [6] INFO: AT2[/dev/ttyUSB0]: Logging in 2010-08-30 11:06:11 [5335] [6] INFO: AT2[/dev/ttyUSB0]: init device 2010-08-30 11:06:11 [5335] [6] INFO: AT2[/dev/ttyUSB0]: speed set to 115200 2010-08-30 11:06:12 [5335] [6] INFO: AT2[/dev/ttyUSB0]: AT SMSC successfully opened. 2010-08-30 11:06:17 [5335] [6] ERROR: AT2[/dev/ttyUSB0]: CMS ERROR: +CMS ERROR: 321 2010-08-30 11:06:17 [5335] [6] ERROR: AT2[/dev/ttyUSB0]: CMS ERROR: Invalid memory index - don't worry, just memory fragmentation. (321) /usr/sbin/smsbox -v 1 /etc/kannel.conf [2] 5356
have some questions
Dear Sir I want ask you some question I want to be provider for sms that I can link my APP with another provider by SMPP and HTTP API and let my customer link their APP with my APP by SMPP and HTTP API so I want APP have below features Can create user account and setup prices for every user and every network Can link with other sms provider by SMPP and HTTP API let my customer link with my APP by SMPP and HTTP API does KANNEL have these features and how can I setup it on my hosting server , cause I have space in JustHost.com and want to setup Kannel on it , and I heard that I can link Playsms with Kannel in the same host space does that will usefull for me ? and how can do that Thanks in advance Best Regards Dr. Ayman Khalaf AHTeam Co Ltd Managing Director Mobile +963 988 539344 E-mail ay...@iboon.net Website www.iBoon.net
Meta data parameters in kannel 1.4.3 on RedHat release 5.5
Greetings, I was hoping to get some help from someone who experienced this same issue about the meta-data parameters in kannel version 1.4.3. Our SMS gateway is requiring us to pass a new parameter called program-id to them. From the Kannel documentation, it seems like I need to add a new parameter in the meta-data. So I add that to the kannel.conf file, which then looks like this: (I removed the sensitive info from it). # MT test bind group = smsc smsc = smpp smsc-id = test_outbound allowed-smsc-id = test_outbound preferred-smsc-id = test_outbound host = 123.123.123.123 port = 12557 transceiver-mode = off interface-version = 34 smsc-username = theusername smsc-password = thepassword system-type = address-range = source-addr-ton = 1 source-addr-npi = 1 group = smpp-tlv name = tlv_test tag = 0x2157 length = 6 smsc-id = test_outbound type = octetstring Then I start kannel in debug mode and I obtain this: sudo /usr/local/sbin/bearerbox -v 0 /etc/kannel/kannel.conf 2010-08-30 15:36:00 [19574] [0] INFO: Debug_lvl = 0, log_file = none, log_lvl = 0 2010-08-30 15:36:00 [19574] [0] ERROR: Group 'smpp-tlv' is no valid group identifier. 2010-08-30 15:36:00 [19574] [0] ERROR: Error found on line 219 of file `/etc/kannel/kannel.conf'. 2010-08-30 15:36:00 [19574] [0] PANIC: Couldn't read configuration from `/etc/kannel/kannel.conf'. 2010-08-30 15:36:01 [19574] [0] PANIC: /usr/local/sbin/bearerbox(gw_panic+0x15b) [0x4770db] 2010-08-30 15:36:01 [19574] [0] PANIC: /usr/local/sbin/bearerbox(main+0xa47) [0x40d027] 2010-08-30 15:36:01 [19574] [0] PANIC: /lib64/libc.so.6(__libc_start_main+0xf4) [0x3f30e1d994] 2010-08-30 15:36:01 [19574] [0] PANIC: /usr/local/sbin/bearerbox [0x40bab9] It seems strange that the error refers to the group smpp-tlv not being valid, since the documentation says it should be (http://www.kannel.org/download/kannel-userguide-snapshot/userguide.html#META-DATA) For more info, I am running kannel 1.4.3, (gateway-1.4.3) compiled from source. Operating system is Red Hat Enterprise Linux Server release 5.5 (Tikanga) (x86_64) And when I run the yum command to find out about the libxml version, this is what I obtain. libxml2.x86_64 2.6.26-2.1.2.8 libxml2-devel.x86_64 2.6.26-2.1.2.8 installed libxml2-python.x86_64 2.6.26-2.1.2.8 Any help will be highly appreciated. Thanks in advance, Jonathan This e-mail message, including any attachments, from Verrus Mobile Technologies Inc. or Verrus UK Limited (collectively, Verrus) is confidential and for the personal use of the recipient(s) identified above. This message may also be legally privileged. If it is not intended for you, do not disclose, copy or distribute the message but delete it immediately and notify the sender by e-mail or telephone +1 866 783 7787 or +44 1453 76 (UK). Any views or opinions expressed in this message are those of the author and not necessarily those of Verrus. The message shall not form part of any legally binding contract or obligation. Verrus electronic communication systems are monitored without user consent to: investigate or to detect unauthorized use; prevent or detect crime; establish the existence of facts relevant to Verrus; or ascertain compliance with regulatory practices relevant to the business of Verrus. This e-mail has been scanned for viruses by a third party e-mail management provider. Verrus cannot accept liability for any damage which you may suffer as a result of virus infection. We recommend that you carry out your own virus checks before opening any attachment.
Re: have some questions
Hi, Kannel provides for HTTP/SMPP connectivity to other SMScs. It even provides text-based configuration of sendsms-user for administrator to manage accounts. It doesn't provide billing or front-end graphical app for creating an managing sendsms-user accounts. This will require hiring a consultant to make them for you. BR, Nikos - Original Message - From: Ayman Khalaf To: users@kannel.org ; commerc...@kannel.org Sent: Monday, August 30, 2010 9:57 PM Subject: have some questions Dear Sir I want ask you some question I want to be provider for sms that I can link my APP with another provider by SMPP and HTTP API and let my customer link their APP with my APP by SMPP and HTTP API so I want APP have below features Can create user account and setup prices for every user and every network Can link with other sms provider by SMPP and HTTP API let my customer link with my APP by SMPP and HTTP API does KANNEL have these features and how can I setup it on my hosting server , cause I have space in JustHost.com and want to setup Kannel on it , and I heard that I can link Playsms with Kannel in the same host space does that will usefull for me ? and how can do that Thanks in advance Best Regards Dr. Ayman Khalaf AHTeam Co Ltd Managing Director Mobile+963 988 539344 e-mailay...@iboon.net Websitewww.iBoon.net Kannel: Open Source WAP and SMS gateway commercial mailing list commerc...@kannel.org NONE OF THE INCLUDED COMMERCIAL OFFERINGS WIHTIN THIS TRANSMITTED INFORMATION IS RELATED TO THE KANNEL GROUP OR THE KANNEL SOFTWARE FOUNDATION. THE SENDER IS RESPONSIBLE FOR THE OFFERING STATEMENTS WITHIN. The information transmitted may be intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. The Kannel Group nor The Kannel Software Foundation are responsible in any way or form if this information is transmitted to any non inteded recipient. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient may be unintentional and the sender is fully reponsible for this. If you receive this in error, please contact the sender. Any views or opinions presented are solely those of the authors and do not necessarily represent those of The Kannel Group nor The Kannel Software Foundation.
Re: help on huawei e160 gsm modem
Hi, 1) Never truncate emails in list. Original problem and replies are lost. 2) I am pretty sure we asked for detailed bb logs (log-level = 0). These are not it. BR, Nikos - Original Message - From: mac...@fastermail.com To: users@kannel.org Sent: Monday, August 30, 2010 9:16 PM Subject: help on huawei e160 gsm modem Hey folks am happy with the help you have accorded me this far but then you told me to post my configuration file as well as the error from the log file and i have done exactly that and i hope you will help me remedy the problem of error of CMS:321 as shown in the log file below and if possible post me the necessary fix to my problem. Finally i have read the user guide time and again on the part of the mysql database in that i want to link kannel which i have installed on my fedora 13 with the MYSQL server within fedora.But considering that i installed kannel from an rpm package,how possible is it that i will easily link it with the database. If am way wide provide me with the neccessary remedy that will enable me to send the messages i receive directly into the database tables of the mysql server.If anything you can post the neccesssary sites that i can visit inorder to succesfully configure kannel with mysql support considering that i have already installed kannel from an rpm package. #CAMCOM MOBILE CONFIGURATION FILE group = core admin-port = 13000 admin-password = mac status-password = henry admin-deny-ip = *.*.*.* admin-allow-ip = 127.0.0.1 smsbox-port = 13001 box-deny-ip = *.*.*.* box-allow-ip = 127.0.0.1 wdp-interface-name = * log-file = /home/mac/bearerbox.log log-level = 1 access-log = /home/mac/kannel.access dlr-storage = internal group = smsc smsc = at port = 1 modemtype = auto device = /dev/ttyUSB0 my-number = 0888959802 log-level = 0 connect-allow-ip = 127.0.0.1 sim-buffering = true group = modems id = huawei_e160 name = huawei_e160 detect-string = huawei init-string = ATZ init-string = ATQ0 V1 E1 S0=0 C1 D2 +FCLASS=0 init-string = AT+CNMI= 2,0,0,2,0 #init-string = AT+CPMS=ME #init-string = AT+CMGL=ALL message-storage = sm speed = 9600 group = smsbox bearerbox-host = localhost sendsms-port = 13013 sendsms-chars = 0123456789 global-sender = 0888959802 access-log = /home/mac/kannel.access log-file = /home/mac/smsbox.log log-level = 0 group = sendsms-user username = 123 password = 123 max-messages = 1 concatenation = true group = sms-service keyword = hi text = singly configured for the world of poly! #default service group = sms-service keyword = default text = INSTANT REPLY FROM KANNEL WITH COURTESY OF MAC!!!THE KANNEL IS A BEAUTIFUL TECHNOLOGY..WE WILL SOON GET THERE #group = smsc #smsc = fake #smsc-id = FAKE #host = localhost #port = 1 [r...@localhost ~]# /usr/sbin/bearerbox -v 1 /etc/kannel.conf [1] 5335 [r...@localhost ~]# 2010-08-30 11:06:04 [5335] [0] INFO: Debug_lvl = 1, log_file = none, log_lvl = 0 2010-08-30 11:06:04 [5335] [0] INFO: DLR using storage type: internal 2010-08-30 11:06:04 [5335] [0] INFO: Added logfile `/home/mac/bearerbox.log' with level `1'. 2010-08-30 11:06:04 [5335] [0] INFO: Started access logfile `/home/mac/kannel.access'. 2010-08-30 11:06:04 [5335] [0] INFO: HTTP: Opening server at port 13000. 2010-08-30 11:06:04 [5335] [0] INFO: BOXC: 'smsbox-max-pending' not set, using default (100). 2010-08-30 11:06:04 [5335] [0] INFO: Set SMS resend frequency to 60 seconds. 2010-08-30 11:06:04 [5335] [0] INFO: SMS resend retry set to unlimited. 2010-08-30 11:06:04 [5335] [0] INFO: DLR rerouting for smsc id (null) disabled. 2010-08-30 11:06:04 [5335] [0] INFO: AT2[/dev/ttyUSB0]: configuration doesn't show modemtype. will autodetect 2010-08-30 11:06:04 [5335] [0] INFO: Adding interface * 2010-08-30 11:06:04 [5335] [0] ERROR: Missing wapbox-port variable, cannot start WAP 2010-08-30 11:06:04 [5335] [0] INFO: 2010-08-30 11:06:04 [5335] [0] INFO: Kannel bearerbox II version 1.4.3 starting 2010-08-30 11:06:04 [5335] [0] INFO: MAIN: Start-up done, entering mainloop 2010-08-30 11:06:04 [5335] [6] INFO: AT2[/dev/ttyUSB0]: opening device 2010-08-30 11:06:05 [5335] [6] INFO: AT2[/dev/ttyUSB0]: speed set to 115200 2010-08-30 11:06:07 [5335] [6] INFO: AT2[/dev/ttyUSB0]: Closing device 2010-08-30 11:06:07 [5335] [6] INFO: AT2[/dev/ttyUSB0]: detect speed is 115200 2010-08-30 11:06:07 [5335] [6] INFO: AT2[/dev/ttyUSB0]: opening device 2010-08-30 11:06:08 [5335] [6] INFO: AT2[/dev/ttyUSB0]: speed set to 115200 2010-08-30 11:06:10 [5335] [6] INFO: AT2[/dev/ttyUSB0]: Closing device 2010-08-30 11:06:10 [5335] [6] INFO: AT2[/dev/ttyUSB0]: opening device 2010-08-30 11:06:10 [5335] [6] INFO: AT2[/dev/ttyUSB0]: Logging in 2010-08-30 11:06:11 [5335] [6] INFO: AT2[/dev/ttyUSB0]: init device 2010-08-30 11:06:11 [5335] [6] INFO: AT2[/dev/ttyUSB0]: speed set to 115200 2010-08-30 11:06:12 [5335] [6] INFO: AT2[/dev/ttyUSB0]: AT SMSC successfully opened. 2010-08-30 11:06:17 [5335]
Re: Throughput setting not honored in smpp 34?
You probably are not using latest svn. Please download and test latest svn. BR, Nikos - Original Message - From: Tord Karlsson to...@30cm.org To: users@kannel.org Sent: Monday, August 30, 2010 3:22 PM Subject: Throughput setting not honored in smpp 34? Hi, I am experiencing problems with SMPP 34 and throttling. My set up is the following; I am using ubuntu and dkpg -s kannel reveals: Architecture: amd64 Version: 1.4.3-0ubuntu2 I am connected to 3 different smsc's, all SMPP and all at version 3.4, SMSC A has unlimited messages/s SMSC B has 10 messages/s ( Throughput set to 6 after getting throttling errors at 10, but I am still getting errors ) SMSC C has 10 messages/s ( Throughput set to 6 after getting throttling errors at 10, but I am still getting errors ) I access these three from three different sendsms-user (a,b,c), they have forced-smsc set to A,B and C respectively. One of the three is seldom used(B), the other two are used depending on destination phone_nr. I am getting throttling errors in the logs, and if I check the frequency of sending_pdu this is what I get. 2010-08-30 14:03:08 [32738] [8] DEBUG: SMPP[C]: Sending PDU: 2010-08-30 14:03:08 [32738] [6] DEBUG: SMPP[A]: Sending PDU: 2010-08-30 14:03:08 [32738] [6] DEBUG: SMPP[A]: Sending PDU: 2010-08-30 14:03:08 [32738] [8] DEBUG: SMPP[C]: Sending PDU: 2010-08-30 14:03:08 [32738] [8] DEBUG: SMPP[C]: Sending PDU: 2010-08-30 14:03:08 [32738] [8] DEBUG: SMPP[C]: Sending PDU: 2010-08-30 14:03:08 [32738] [8] DEBUG: SMPP[C]: Sending PDU: 2010-08-30 14:03:08 [32738] [8] DEBUG: SMPP[C]: Sending PDU: 2010-08-30 14:03:08 [32738] [8] DEBUG: SMPP[C]: Sending PDU: 2010-08-30 14:03:08 [32738] [8] DEBUG: SMPP[C]: Sending PDU: 2010-08-30 14:03:08 [32738] [8] DEBUG: SMPP[C]: Sending PDU: 2010-08-30 14:03:08 [32738] [8] DEBUG: SMPP[C]: Sending PDU: 2010-08-30 14:03:08 [32738] [8] DEBUG: SMPP[C]: Sending PDU: 2010-08-30 14:03:08 [32738] [8] DEBUG: SMPP[C]: Sending PDU: 2010-08-30 14:03:08 [32738] [6] DEBUG: SMPP[A]: Sending PDU: 2010-08-30 14:03:08 [32738] [6] DEBUG: SMPP[A]: Sending PDU: 2010-08-30 14:03:08 [32738] [8] DEBUG: SMPP[C]: Sending PDU: 2010-08-30 14:03:08 [32738] [6] DEBUG: SMPP[A]: Sending PDU: 2010-08-30 14:03:08 [32738] [6] DEBUG: SMPP[A]: Sending PDU: 2010-08-30 14:03:08 [32738] [8] DEBUG: SMPP[C]: Sending PDU: during this second there are 6 sms sent to A ( which is ok, no throughput-limit is set ) and 14 sms sent to C which directly goes against througput which is set to 6( seen in the following row that it has accepted my throughput setting ) 2010-08-27 03:35:36 [15936] [0] INFO: Set throughput to 6.000 for smsc id C The setting for B ( and C ) is as following: group=smsc smsc=smpp smsc-id=B allowed-smsc-id=B throughput=6 interface-version=34 host=x.y.z.w port=xy system-id=asdasd smsc-password=asdasd system-type=client01 transceiver-mode=1 The setting for b( and c) is as following: group = sendsms-user username= password= user-deny-ip = *.*.*.* user-allow-ip = x.y.u.z max-messages = 10 concatenation = true forced-smsc = B Is there something I have missed? Please advice. // Totte
Re: Getting DLR reports for AT SMSC
Hi, I am surprised you are getting *any* DLRs to smsbox at all. You should configure in smsbox-route. As far as your modem goes, everything looks good from your side. Sometimes a DLR might take a few days to come in, depending on mobile availability. If you are sure that the SMS has been delivered, you should contact your SIM provider for your Huawei, and ask them about it. It seems they are not sending you DLRs. Nothing kannel can do about it. BR, Nikos - Original Message - From: Gjergji Guri To: Nikos Balkanas Cc: users@kannel.org Sent: Monday, August 30, 2010 11:26 AM Subject: Re: Getting DLR reports for AT SMSC Hi Nikos, Please, find attached the configuration and a test of sending a message that uses the modem. The web server for the callback URL was not up at the time of this test, so discard that part. The delivery URL is identical with the one that I use to test Clickatell and it works The log files generated are attached. Do you need additional information or do you see any flow in the configuration? Kind Regards, Gjergji 2010/8/28 Nikos Balkanas nbalka...@gmail.com Nothing different from your http smsc connection. Do you see any DLRs in access log from GSM modem? Please post your configuration and detailed bb logs of a deliver_sm pdu from your GSM modem, with context. BR, Nikos - Original Message - From: Gjergji Guri To: Nikos Balkanas Cc: users@kannel.org Sent: Saturday, August 28, 2010 3:30 PM Subject: Re: Getting DLR reports for AT SMSC Many thanks Nikos and good to hear that it works. I've configured DLR callback with Clickatell (system-type = clickatell) having the smsc variable set to http. This is configured as a separate SMSC and I have no problem with processing DLR. I've configure a HUAWEI E618 Mobile Connect - 3G Modem and can send SMS messages using HTTP Push service. In my current configuration I do not see the dlr-url to be called, when I use the GSM modem, which works when message is routed via clickatell. Do I need to make any specific configuration for the GSM modem smsc in order for the delivery status reports to be processed? Kind Regards, Gjergji 2010/8/28 Nikos Balkanas nbalka...@gmail.com Yes, and it works. Note that using a GSM modem is more reliable than a phone. Some providers do not send DLRs to a phone. But what do you mean by http SMSc? A GSM modem is different than an HTTP smsc. BR, Nikos - Original Message - From: Gjergji Guri To: users@kannel.org Sent: Saturday, August 28, 2010 10:39 AM Subject: Getting DLR reports for AT SMSC Hi, I have no problem to get DLR report for http SMSC by setting the correct dlr-mask and dlr-url. Nevertheless, though my modem driver and network support receiving delivery reports the bearerbox do not process any delivery reports. At page 64 of the User Guide (Feature checklist) or Table 6-2. SMSC driver features I can see that for AT driver the “Can Use DLR” is set to N. Nevertheless, N is set even for http request where the delivery is working fine in my configuration. Do I need to setup some specific processing for the incoming SMS delivery reports retrieved by the AT modem? Has anyone configured delivery reports with Kannel using a modem (AT SMSC driver)? Any hint, guidance? Cheers, Gjergji
Re: Meta data parameters in kannel 1.4.3 on RedHat release 5.5
Hi, Please download latest svn. It should work. BR, Nikos - Original Message - From: Jonathan Zylberberg To: users@kannel.org Sent: Tuesday, August 31, 2010 1:48 AM Subject: Meta data parameters in kannel 1.4.3 on RedHat release 5.5 Greetings, I was hoping to get some help from someone who experienced this same issue about the meta-data parameters in kannel version 1.4.3. Our SMS gateway is requiring us to pass a new parameter called program-id to them. From the Kannel documentation, it seems like I need to add a new parameter in the meta-data. So I add that to the kannel.conf file, which then looks like this: (I removed the sensitive info from it). # MT test bind group = smsc smsc = smpp smsc-id = test_outbound allowed-smsc-id = test_outbound preferred-smsc-id = test_outbound host = 123.123.123.123 port = 12557 transceiver-mode = off interface-version = 34 smsc-username = theusername smsc-password = thepassword system-type = address-range = source-addr-ton = 1 source-addr-npi = 1 group = smpp-tlv name = tlv_test tag = 0x2157 length = 6 smsc-id = test_outbound type = octetstring Then I start kannel in debug mode and I obtain this: sudo /usr/local/sbin/bearerbox -v 0 /etc/kannel/kannel.conf 2010-08-30 15:36:00 [19574] [0] INFO: Debug_lvl = 0, log_file = none, log_lvl = 0 2010-08-30 15:36:00 [19574] [0] ERROR: Group 'smpp-tlv' is no valid group identifier. 2010-08-30 15:36:00 [19574] [0] ERROR: Error found on line 219 of file `/etc/kannel/kannel.conf'. 2010-08-30 15:36:00 [19574] [0] PANIC: Couldn't read configuration from `/etc/kannel/kannel.conf'. 2010-08-30 15:36:01 [19574] [0] PANIC: /usr/local/sbin/bearerbox(gw_panic+0x15b) [0x4770db] 2010-08-30 15:36:01 [19574] [0] PANIC: /usr/local/sbin/bearerbox(main+0xa47) [0x40d027] 2010-08-30 15:36:01 [19574] [0] PANIC: /lib64/libc.so.6(__libc_start_main+0xf4) [0x3f30e1d994] 2010-08-30 15:36:01 [19574] [0] PANIC: /usr/local/sbin/bearerbox [0x40bab9] It seems strange that the error refers to the group smpp-tlv not being valid, since the documentation says it should be (http://www.kannel.org/download/kannel-userguide-snapshot/userguide.html#META-DATA) For more info, I am running kannel 1.4.3, (gateway-1.4.3) compiled from source. Operating system is Red Hat Enterprise Linux Server release 5.5 (Tikanga) (x86_64) And when I run the yum command to find out about the libxml version, this is what I obtain. libxml2.x86_64 2.6.26-2.1.2.8 libxml2-devel.x86_64 2.6.26-2.1.2.8 installed libxml2-python.x86_64 2.6.26-2.1.2.8 Any help will be highly appreciated. Thanks in advance, Jonathan This e-mail message, including any attachments, from Verrus Mobile Technologies Inc. or Verrus UK Limited (collectively, Verrus) is confidential and for the personal use of the recipient(s) identified above. This message may also be legally privileged. If it is not intended for you, do not disclose, copy or distribute the message but delete it immediately and notify the sender by e-mail or telephone +1 866 783 7787 or +44 1453 76 (UK). Any views or opinions expressed in this message are those of the author and not necessarily those of Verrus. The message shall not form part of any legally binding contract or obligation. Verrus electronic communication systems are monitored without user consent to: investigate or to detect unauthorized use; prevent or detect crime; establish the existence of facts relevant to Verrus; or ascertain compliance with regulatory practices relevant to the business of Verrus. This e-mail has been scanned for viruses by a third party e-mail management provider. Verrus cannot accept liability for any damage which you may suffer as a result of virus infection. We recommend that you carry out your own virus checks before opening any attachment.
Re: have some questions
Hi Thanks for your reply I hope that I can get your helping to find how I can put Billing and fornt-end graphical system to become sms provider , is playsms use full for me in this case Thanks and waiting On Aug 31, 2010, at 2:38 AM, Nikos Balkanas wrote: Hi, Kannel provides for HTTP/SMPP connectivity to other SMScs. It even provides text-based configuration of sendsms-user for administrator to manage accounts. It doesn't provide billing or front-end graphical app for creating an managing sendsms-user accounts. This will require hiring a consultant to make them for you. BR, Nikos - Original Message - From: Ayman Khalaf To: users@kannel.org ; commerc...@kannel.org Sent: Monday, August 30, 2010 9:57 PM Subject: have some questions Dear Sir I want ask you some question I want to be provider for sms that I can link my APP with another provider by SMPP and HTTP API and let my customer link their APP with my APP by SMPP and HTTP API so I want APP have below features Can create user account and setup prices for every user and every network Can link with other sms provider by SMPP and HTTP API let my customer link with my APP by SMPP and HTTP API does KANNEL have these features and how can I setup it on my hosting server , cause I have space in JustHost.com and want to setup Kannel on it , and I heard that I can link Playsms with Kannel in the same host space does that will usefull for me ? and how can do that Thanks in advance Best Regards Dr. Ayman Khalaf AHTeam Co Ltd Managing Director Mobile+963 988 539344 e-mailay...@iboon.net Websitewww.iBoon.net Kannel: Open Source WAP and SMS gateway commercial mailing list commerc...@kannel.org NONE OF THE INCLUDED COMMERCIAL OFFERINGS WIHTIN THIS TRANSMITTED INFORMATION IS RELATED TO THE KANNEL GROUP OR THE KANNEL SOFTWARE FOUNDATION. THE SENDER IS RESPONSIBLE FOR THE OFFERING STATEMENTS WITHIN. The information transmitted may be intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. The Kannel Group nor The Kannel Software Foundation are responsible in any way or form if this information is transmitted to any non inteded recipient. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient may be unintentional and the sender is fully reponsible for this. If you receive this in error, please contact the sender. Any views or opinions presented are solely those of the authors and do not necessarily represent those of The Kannel Group nor The Kannel Software Foundation. Dr. Ayman Khalaf AHTeam Co Ltd Managing Director Mobile +963 988 539344 E-mail ay...@iboon.net Website www.iBoon.net
Re: have some questions
Depending what you are looking for, PlaySMS 0.9.5-svn : A Credit SMS Rate option is present Current Features - Multiple database engine supported (using PHP PEAR DB) - Send SMS to single mobile phone (web2mobile) - Send SMS broadcasted to a group of mobile phones (web2mobiles) - Support sending flash and unicode message - Receive private SMS to Inbox (mobile2web) - Forward single SMS from mobile to a group of mobile phones (mobile2mobiles) - SMS autoreply, for easy autoreplying formatted incoming SMS - SMS board, forward received SMS to email,html and/or xml page - SMS command, execute server side shell script using SMS - SMS custom, forward incoming SMS to custom SMS application - SMS poll, manage polling system using SMS - SMS quiz, serve quizzes on SMS - SMS subscribe, manage user subscribes to a service using SMS - SMS autosend, automatically send SMS once or repeated - Create your own features, themes and gateway modules as a plugin - Support Gnokii, Kannel, SMS Server Tools or Clickatell - Simple webservices for sending SMS and retrieving delivery reports (input.php) - Long SMS support, length of text configurable on config file - Rate SMS by detination prefix - SMS credit system per user - Web-based interface More dedicated to Kannel ( Mbuni), I have a PlaySMS version where the difference with main project is the following (we are going to merge them for some features, MMS capabilities and others will be addons): Feature added: - Scheduled SMS (use SQLbox) - Mailling SMS (use SQbox instead of SMSbox) - Statistics page - Translation (fr,en) of the GUI - Themes template config from admin panel - Contacts import in CSV now handles UTF-8 characters. - PHP syntaxes fixed (a lot of variable $var['field'] miss simple quote). - Timestamp configuration for Incoming MO from Kannel (geturl.php). - Option to share a subscription service list to a Contact user for Bulk SMS. - Enabling Public visibility for an Admin Contacts group created. - Option to configure a max number of SMS to send in a Bulk SMS. - Statistics page added for users. - Global statistics page for admins. - User guide page added. - Kannel SMS status code displayed in ‘GW Status’ in all_incoming/outgoing_sms (admin) - New theme. - Option to forward message by SMS also in BOARD service (SMS-Mail+SMS). - SMS-C selection on Kannel config (list in MySQL table). This version is not prepared to be distributed but at least it exists, so that you all know the features available and what can be done using PlaySMS, Kannel and Mbuni. Regards, Emmanuel 2010/8/31 Ayman Khalaf ay...@iboon.net Hi Thanks for your reply I hope that I can get your helping to find how I can put Billing and fornt-end graphical system to become sms provider , is playsms use full for me in this case Thanks and waiting On Aug 31, 2010, at 2:38 AM, Nikos Balkanas wrote: Hi, Kannel provides for HTTP/SMPP connectivity to other SMScs. It even provides text-based configuration of sendsms-user for administrator to manage accounts. It doesn't provide billing or front-end graphical app for creating an managing sendsms-user accounts. This will require hiring a consultant to make them for you. BR, Nikos - Original Message - From: Ayman Khalaf To: users@kannel.org ; commerc...@kannel.org Sent: Monday, August 30, 2010 9:57 PM Subject: have some questions Dear Sir I want ask you some question I want to be provider for sms that I can link my APP with another provider by SMPP and HTTP API and let my customer link their APP with my APP by SMPP and HTTP API so I want APP have below features Can create user account and setup prices for every user and every network Can link with other sms provider by SMPP and HTTP API let my customer link with my APP by SMPP and HTTP API does KANNEL have these features and how can I setup it on my hosting server , cause I have space in JustHost.com and want to setup Kannel on it , and I heard that I can link Playsms with Kannel in the same host space does that will usefull for me ? and how can do that Thanks in advance Best Regards Dr. Ayman Khalaf AHTeam Co Ltd Managing Director Mobile+963 988 539344 e-mailay...@iboon.net Websitewww.iBoon.net Kannel: Open Source WAP and SMS gateway commercial mailing list commerc...@kannel.org NONE OF THE INCLUDED COMMERCIAL OFFERINGS WIHTIN THIS TRANSMITTED INFORMATION IS RELATED TO THE KANNEL GROUP OR THE KANNEL SOFTWARE FOUNDATION. THE SENDER IS RESPONSIBLE FOR THE OFFERING STATEMENTS WITHIN. The information transmitted may be intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. The Kannel Group nor The Kannel Software Foundation are responsible in any way or form if this information is transmitted to any non inteded recipient. Any review, retransmission, dissemination or other use
FW: Meta data parameters in kannel 1.4.3 on RedHat release 5.5
Hi, Thanks for your email. Should I get all the latest code from the tree? Or just a single file? Is there a .tar file that I can download? Or what tree branch should I get the source from? Thanks again -Original Message- From: Nikos Balkanas [mailto:nbalka...@gmail.com] Sent: Monday, August 30, 2010 4:55 PM To: Jonathan Zylberberg; users@kannel.org Subject: Re: Meta data parameters in kannel 1.4.3 on RedHat release 5.5 Hi, Please download latest svn. It should work. BR, Nikos - Original Message - From: Jonathan Zylberberg To: users@kannel.org Sent: Tuesday, August 31, 2010 1:48 AM Subject: Meta data parameters in kannel 1.4.3 on RedHat release 5.5 Greetings, I was hoping to get some help from someone who experienced this same issue about the meta-data parameters in kannel version 1.4.3. Our SMS gateway is requiring us to pass a new parameter called program-id to them. From the Kannel documentation, it seems like I need to add a new parameter in the meta-data. So I add that to the kannel.conf file, which then looks like this: (I removed the sensitive info from it). # MT test bind group = smsc smsc = smpp smsc-id = test_outbound allowed-smsc-id = test_outbound preferred-smsc-id = test_outbound host = 123.123.123.123 port = 12557 transceiver-mode = off interface-version = 34 smsc-username = theusername smsc-password = thepassword system-type = address-range = source-addr-ton = 1 source-addr-npi = 1 group = smpp-tlv name = tlv_test tag = 0x2157 length = 6 smsc-id = test_outbound type = octetstring Then I start kannel in debug mode and I obtain this: sudo /usr/local/sbin/bearerbox -v 0 /etc/kannel/kannel.conf 2010-08-30 15:36:00 [19574] [0] INFO: Debug_lvl = 0, log_file = none, log_lvl = 0 2010-08-30 15:36:00 [19574] [0] ERROR: Group 'smpp-tlv' is no valid group identifier. 2010-08-30 15:36:00 [19574] [0] ERROR: Error found on line 219 of file `/etc/kannel/kannel.conf'. 2010-08-30 15:36:00 [19574] [0] PANIC: Couldn't read configuration from `/etc/kannel/kannel.conf'. 2010-08-30 15:36:01 [19574] [0] PANIC: /usr/local/sbin/bearerbox(gw_panic+0x15b) [0x4770db] 2010-08-30 15:36:01 [19574] [0] PANIC: /usr/local/sbin/bearerbox(main+0xa47) [0x40d027] 2010-08-30 15:36:01 [19574] [0] PANIC: /lib64/libc.so.6(__libc_start_main+0xf4) [0x3f30e1d994] 2010-08-30 15:36:01 [19574] [0] PANIC: /usr/local/sbin/bearerbox [0x40bab9] It seems strange that the error refers to the group smpp-tlv not being valid, since the documentation says it should be (http://www.kannel.org/download/kannel-userguide-snapshot/userguide.html#META-DATA) For more info, I am running kannel 1.4.3, (gateway-1.4.3) compiled from source. Operating system is Red Hat Enterprise Linux Server release 5.5 (Tikanga) (x86_64) And when I run the yum command to find out about the libxml version, this is what I obtain. libxml2.x86_64 2.6.26-2.1.2.8 libxml2-devel.x86_64 2.6.26-2.1.2.8 installed libxml2-python.x86_64 2.6.26-2.1.2.8 Any help will be highly appreciated. Thanks in advance, Jonathan This e-mail message, including any attachments, from Verrus Mobile Technologies Inc. or Verrus UK Limited (collectively, Verrus) is confidential and for the personal use of the recipient(s) identified above. This message may also be legally privileged. If it is not intended for you, do not disclose, copy or distribute the message but delete it immediately and notify the sender by e-mail or telephone +1 866 783 7787 or +44 1453 76 (UK). Any views or opinions expressed in this message are those of the author and not necessarily those of Verrus. The message shall not form part of any legally binding contract or obligation. Verrus electronic communication systems are monitored without user consent to: investigate or to detect unauthorized use; prevent or detect crime; establish the existence of facts relevant to Verrus; or ascertain compliance with regulatory practices relevant to the business of Verrus. This e-mail has been scanned for viruses by a third party e-mail management provider. Verrus cannot accept liability for any damage which you may suffer as a result of virus infection. We recommend that you carry out your own virus checks before opening any attachment. This e-mail message, including any attachments, from Verrus Mobile Technologies Inc. or Verrus UK Limited (collectively, Verrus) is confidential and for the personal use of the recipient(s) identified above. This message may also be legally privileged. If it is not intended for you, do not disclose, copy or distribute the message but delete it immediately and notify the sender by e-mail or telephone +1 866 783 7787 or +44 1453 76 (UK). Any views or opinions expressed in this message are those of the author and not necessarily those of Verrus. The message shall not form part of any legally binding contract or obligation. Verrus electronic communication systems are monitored without user consent to: investigate or to
Re: Meta data parameters in kannel 1.4.3 on RedHat release 5.5
Hi, Go to the site-downloads and follow instructions to get latest svn. BR, Nikos - Original Message - From: Jonathan Zylberberg jzylberb...@verrus.com To: users@kannel.org Sent: Tuesday, August 31, 2010 3:48 AM Subject: FW: Meta data parameters in kannel 1.4.3 on RedHat release 5.5 Hi, Thanks for your email. Should I get all the latest code from the tree? Or just a single file? Is there a .tar file that I can download? Or what tree branch should I get the source from? Thanks again -Original Message- From: Nikos Balkanas [mailto:nbalka...@gmail.com] Sent: Monday, August 30, 2010 4:55 PM To: Jonathan Zylberberg; users@kannel.org Subject: Re: Meta data parameters in kannel 1.4.3 on RedHat release 5.5 Hi, Please download latest svn. It should work. BR, Nikos - Original Message - From: Jonathan Zylberberg To: users@kannel.org Sent: Tuesday, August 31, 2010 1:48 AM Subject: Meta data parameters in kannel 1.4.3 on RedHat release 5.5 Greetings, I was hoping to get some help from someone who experienced this same issue about the meta-data parameters in kannel version 1.4.3. Our SMS gateway is requiring us to pass a new parameter called program-id to them. From the Kannel documentation, it seems like I need to add a new parameter in the meta-data. So I add that to the kannel.conf file, which then looks like this: (I removed the sensitive info from it). # MT test bind group = smsc smsc = smpp smsc-id = test_outbound allowed-smsc-id = test_outbound preferred-smsc-id = test_outbound host = 123.123.123.123 port = 12557 transceiver-mode = off interface-version = 34 smsc-username = theusername smsc-password = thepassword system-type = address-range = source-addr-ton = 1 source-addr-npi = 1 group = smpp-tlv name = tlv_test tag = 0x2157 length = 6 smsc-id = test_outbound type = octetstring Then I start kannel in debug mode and I obtain this: sudo /usr/local/sbin/bearerbox -v 0 /etc/kannel/kannel.conf 2010-08-30 15:36:00 [19574] [0] INFO: Debug_lvl = 0, log_file = none, log_lvl = 0 2010-08-30 15:36:00 [19574] [0] ERROR: Group 'smpp-tlv' is no valid group identifier. 2010-08-30 15:36:00 [19574] [0] ERROR: Error found on line 219 of file `/etc/kannel/kannel.conf'. 2010-08-30 15:36:00 [19574] [0] PANIC: Couldn't read configuration from `/etc/kannel/kannel.conf'. 2010-08-30 15:36:01 [19574] [0] PANIC: /usr/local/sbin/bearerbox(gw_panic+0x15b) [0x4770db] 2010-08-30 15:36:01 [19574] [0] PANIC: /usr/local/sbin/bearerbox(main+0xa47) [0x40d027] 2010-08-30 15:36:01 [19574] [0] PANIC: /lib64/libc.so.6(__libc_start_main+0xf4) [0x3f30e1d994] 2010-08-30 15:36:01 [19574] [0] PANIC: /usr/local/sbin/bearerbox [0x40bab9] It seems strange that the error refers to the group smpp-tlv not being valid, since the documentation says it should be (http://www.kannel.org/download/kannel-userguide-snapshot/userguide.html#META-DATA) For more info, I am running kannel 1.4.3, (gateway-1.4.3) compiled from source. Operating system is Red Hat Enterprise Linux Server release 5.5 (Tikanga) (x86_64) And when I run the yum command to find out about the libxml version, this is what I obtain. libxml2.x86_64 2.6.26-2.1.2.8 libxml2-devel.x86_64 2.6.26-2.1.2.8 installed libxml2-python.x86_64 2.6.26-2.1.2.8 Any help will be highly appreciated. Thanks in advance, Jonathan This e-mail message, including any attachments, from Verrus Mobile Technologies Inc. or Verrus UK Limited (collectively, Verrus) is confidential and for the personal use of the recipient(s) identified above. This message may also be legally privileged. If it is not intended for you, do not disclose, copy or distribute the message but delete it immediately and notify the sender by e-mail or telephone +1 866 783 7787 or +44 1453 76 (UK). Any views or opinions expressed in this message are those of the author and not necessarily those of Verrus. The message shall not form part of any legally binding contract or obligation. Verrus electronic communication systems are monitored without user consent to: investigate or to detect unauthorized use; prevent or detect crime; establish the existence of facts relevant to Verrus; or ascertain compliance with regulatory practices relevant to the business of Verrus. This e-mail has been scanned for viruses by a third party e-mail management provider. Verrus cannot accept liability for any damage which you may suffer as a result of virus infection. We recommend that you carry out your own virus checks before opening any attachment. This e-mail message, including any attachments, from Verrus Mobile Technologies Inc. or Verrus UK Limited (collectively, Verrus) is confidential and for the personal use of the recipient(s) identified above. This message may also be legally privileged. If it is not intended for you, do not disclose, copy or distribute the message but delete it immediately and notify the sender by e-mail or telephone +1 866 783 7787 or +44 1453
Re: FW: Meta data parameters in kannel 1.4.3 on RedHat release 5.5
Checking at the Kannel website is always a good idea ;) Download the latest daily snapshot: http://www.kannel.org/download/kannel-snapshot.tar.gz Regards, Juan On Mon, Aug 30, 2010 at 9:48 PM, Jonathan Zylberberg jzylberb...@verrus.com wrote: Hi, Thanks for your email. Should I get all the latest code from the tree? Or just a single file? Is there a .tar file that I can download? Or what tree branch should I get the source from? Thanks again -Original Message- From: Nikos Balkanas [mailto:nbalka...@gmail.com] Sent: Monday, August 30, 2010 4:55 PM To: Jonathan Zylberberg; users@kannel.org Subject: Re: Meta data parameters in kannel 1.4.3 on RedHat release 5.5 Hi, Please download latest svn. It should work. BR, Nikos - Original Message - From: Jonathan Zylberberg To: users@kannel.org Sent: Tuesday, August 31, 2010 1:48 AM Subject: Meta data parameters in kannel 1.4.3 on RedHat release 5.5 Greetings, I was hoping to get some help from someone who experienced this same issue about the meta-data parameters in kannel version 1.4.3. Our SMS gateway is requiring us to pass a new parameter called program-id to them. From the Kannel documentation, it seems like I need to add a new parameter in the meta-data. So I add that to the kannel.conf file, which then looks like this: (I removed the sensitive info from it). # MT test bind group = smsc smsc = smpp smsc-id = test_outbound allowed-smsc-id = test_outbound preferred-smsc-id = test_outbound host = 123.123.123.123 port = 12557 transceiver-mode = off interface-version = 34 smsc-username = theusername smsc-password = thepassword system-type = address-range = source-addr-ton = 1 source-addr-npi = 1 group = smpp-tlv name = tlv_test tag = 0x2157 length = 6 smsc-id = test_outbound type = octetstring Then I start kannel in debug mode and I obtain this: sudo /usr/local/sbin/bearerbox -v 0 /etc/kannel/kannel.conf 2010-08-30 15:36:00 [19574] [0] INFO: Debug_lvl = 0, log_file = none, log_lvl = 0 2010-08-30 15:36:00 [19574] [0] ERROR: Group 'smpp-tlv' is no valid group identifier. 2010-08-30 15:36:00 [19574] [0] ERROR: Error found on line 219 of file `/etc/kannel/kannel.conf'. 2010-08-30 15:36:00 [19574] [0] PANIC: Couldn't read configuration from `/etc/kannel/kannel.conf'. 2010-08-30 15:36:01 [19574] [0] PANIC: /usr/local/sbin/bearerbox(gw_panic+0x15b) [0x4770db] 2010-08-30 15:36:01 [19574] [0] PANIC: /usr/local/sbin/bearerbox(main+0xa47) [0x40d027] 2010-08-30 15:36:01 [19574] [0] PANIC: /lib64/libc.so.6(__libc_start_main+0xf4) [0x3f30e1d994] 2010-08-30 15:36:01 [19574] [0] PANIC: /usr/local/sbin/bearerbox [0x40bab9] It seems strange that the error refers to the group smpp-tlv not being valid, since the documentation says it should be (http://www.kannel.org/download/kannel-userguide-snapshot/userguide.html#META-DATA) For more info, I am running kannel 1.4.3, (gateway-1.4.3) compiled from source. Operating system is Red Hat Enterprise Linux Server release 5.5 (Tikanga) (x86_64) And when I run the yum command to find out about the libxml version, this is what I obtain. libxml2.x86_64 2.6.26-2.1.2.8 libxml2-devel.x86_64 2.6.26-2.1.2.8 installed libxml2-python.x86_64 2.6.26-2.1.2.8 Any help will be highly appreciated. Thanks in advance, Jonathan This e-mail message, including any attachments, from Verrus Mobile Technologies Inc. or Verrus UK Limited (collectively, Verrus) is confidential and for the personal use of the recipient(s) identified above. This message may also be legally privileged. If it is not intended for you, do not disclose, copy or distribute the message but delete it immediately and notify the sender by e-mail or telephone +1 866 783 7787 or +44 1453 76 (UK). Any views or opinions expressed in this message are those of the author and not necessarily those of Verrus. The message shall not form part of any legally binding contract or obligation. Verrus electronic communication systems are monitored without user consent to: investigate or to detect unauthorized use; prevent or detect crime; establish the existence of facts relevant to Verrus; or ascertain compliance with regulatory practices relevant to the business of Verrus. This e-mail has been scanned for viruses by a third party e-mail management provider. Verrus cannot accept liability for any damage which you may suffer as a result of virus infection. We recommend that you carry out your own virus checks before opening any attachment. This e-mail message, including any attachments, from Verrus Mobile Technologies Inc. or Verrus UK Limited (collectively, Verrus) is confidential and for the personal use of the recipient(s) identified above. This message may also be legally privileged. If it is not intended for you, do not disclose, copy or distribute the message but delete it immediately and notify the
