Hi David,
I've just reinstalled Fedora Core 3 on an Audio node and after I updated
the yum and ran (yum install AccessGrid) the installation begins but
stops to the error of:
Error: missing dependency: vnc is needed by package Access Grid
Error: missing dependency: wxPython is needed by
I've just reinstalled Fedora Core 3 on an Audio node and after I updated the
yum and ran (yum install AccessGrid) the installation begins but stops to the
error of:
Error: missing dependency: vnc is needed by package Access Grid
Error: missing dependency: wxPython is needed by package Access
Hi Jeremy,
On Fri, 25 Feb 2005, Eric Olson wrote:
If you haven't already, make sure fedora's firewall isn't preventing
rat from getting multicast.
I usually clear it with /sbin/iptables -F since we have an external
firewall. You could probably also disable the service /sbin/service
iptables
Hi Jeremy,
If you haven't already, make sure fedora's firewall isn't preventing
rat from getting multicast.
I usually clear it with /sbin/iptables -F since we have an external
firewall. You could probably also disable the service /sbin/service
iptables off. Make sure to turn it back on or poke
, really important! (Don't use the
CloneVSync or CloneHRefresh found in the URL example!)
Done.
Original Message
Subject:Re: [AG-TECH] Fedora Core 3 Display Troubles
List-Post: accessgrid-tech@lists.sourceforge.net
Date: Fri, 10 Dec 2004 14:04:13 -0600
From: Fred
it's been a while, but i thought i needed to edit xorg.conf directly in
order to get the multiple monitor settings correct.
i think, check the 'ServerLayout' section of xorg.conf for fine-tuning.
it probably discusses that in Andrew's link.
--fred
On Thu, Dec 09, 2004 at 09:52PM, Andrew Replogle
Todd,
Try this site for a more in depth setup of X11 dual-headed:
http://quark.humbug.org.au/publications/xfree86/xinerama.html
Let me know if you still run into issues.
Andrew
On Thu, 9 Dec 2004 15:52:36 -0600, Todd Reed tr...@astate.edu wrote:
I've installed Fedora Core 3 on our Display
I've installed Fedora Core 3 on our Display System and I'm having
trouble getting the displays to span across the screens. I have the
operators monitor plugged into a Matrox G200. There are also 3
Projectors plugged into a Matrox G450. The G200 works fine and the G450
is being recoginized by
All
Has anyone used FC3 with AGtk 2.3? We are upgrading our old 3
machine node and would like to know if anyone is running FC3 yet.
Thanks
Paul
--
Paul Mercer
Arctic Region Supercomputing Center
907 450 8649
9 matches
Mail list logo