Manager
To: [EMAIL PROTECTED]
cc:
Subject:Re: Problems with TSM AIX server V5.1.5.4
AFAIK the values must be exact multiply of and not just over the values
stated. Especially the max_coalesce parameter might cause some grief.
Their description is in Appendix D
message
so I am open to your suggestions !!!
Dave Canan [EMAIL PROTECTED]
Sent by: ADSM: Dist Stor Manager [EMAIL PROTECTED]
01/15/2003 08:41 PM
Please respond to ADSM: Dist Stor Manager
To: [EMAIL PROTECTED]
cc:
Subject:Re: Problems with TSM AIX server V5.1.5.4
open to your suggestions !!!
Dave Canan [EMAIL PROTECTED]
Sent by: ADSM: Dist Stor Manager [EMAIL PROTECTED]
01/15/2003 08:41 PM
Please respond to ADSM: Dist Stor Manager
To: [EMAIL PROTECTED]
cc:
Subject:Re: Problems with TSM AIX server V5.1.5.4
Can you do
to your suggestions !!!
Dave Canan [EMAIL PROTECTED]
Sent by: ADSM: Dist Stor Manager [EMAIL PROTECTED]
01/15/2003 08:41 PM
Please respond to ADSM: Dist Stor Manager
To: [EMAIL PROTECTED]
cc:
Subject:Re: Problems with TSM AIX server V5.1.5.4
Can you do
Just tried formatting a new storage pool volume on the above system. First
time since upgrading to 5.1.5.x.
Seeing lots of errors: LVDD LVM_IO_FAIL is the message.
Nothing in ERRPT but these errors. Nothing to point to a specific hardware
failure. Physically checked the drives (SSA) and can see
Can you do the following and re-post with what you have set for the following?
smitty devices - SSA disks - SSA Logical Disks - Change/Show
Characteristics of an SSA Logical Disk - select hdiskxx (where xx is the
hdisk where you are defining the volume)
Look at the following fields:
1.