This link shows the formula for the drive addresses when the Queued Unloads
(Boption is set to OFF.
(B
(Bhttp://www-1.ibm.com/support/entdocview.wss?rs=663uid=swg21066478
(B
(BYou can also use lbtest to find out the address of the drives - lbtest -d
(Blibname. Select 6 to open and 8 for
Matthew,
Have you had any interesting records in /var/adm/messages that you can
match up to when one or more of the tapes was mounted? (ANR8468I volume
x dismounted is a good search key).
We have only seen this on san-attached devices, and then only when a RSCN
has occurred on the fabric.
Hi *SMers,
anyone knows a documentation where we can find the changes about the
messages in the actlog ?
ie with 5.1.7.0 the ANE4987E message changed.
The space between folder and file name has been removed.
maybee a CHANGE file ?
Best regards
--
David Rigaudiere -+- Administration TSM -+-
Hi all,my logvol have total space only 300MB and my log mode is rollforward,and my
hard disk have no more sapce.About 1 month later ,the space will be fulled,how can I
solve this?
[EMAIL PROTECTED]
2003-06-24
Hello.
Some time ago we had a problem with 'no drives available'.
It was in 5.1.5.x and 5.1.6.x times.
Few weekes ago we did upgrade to 5.1.7.0 and yesterday problem occured again
:(
The symptoms are:
1. In actlog:
24-06-2003 06:20:03 ANR8447E No drives are currently available in library ROBOCOP.
are all drives online?
does another application use the drives?
how is the mount retention parameter of the dev-class set?
do you have other information from the 3494 interface?
regards
joachim
-Ursprngliche Nachricht-
Von: Przemyslaw Maciuszko [mailto:[EMAIL PROTECTED]
Gesendet:
On Tue, Jun 24, 2003 at 12:14:29PM +0200, Schaub Joachim Paul ABX-SECE-ZH wrote:
are all drives online?
Yes.
does another application use the drives?
No. Drives with mounts in 'idle' status, are not being used by any processes
or sessions.
how is the mount retention parameter of the
How about q path? Are they all showing online?
Curt Magura
Lockheed Martin EIS
Orlando Fla.
321-235-1203
-Original Message-
From: Przemyslaw Maciuszko [mailto:[EMAIL PROTECTED]
Sent: Tuesday, June 24, 2003 6:50 AM
To: [EMAIL PROTECTED]
Subject: Re: AW: TSM on AIX and 3494 library
On Tue, Jun 24, 2003 at 07:03:54AM -0400, Magura, Curtis wrote:
How about q path? Are they all showing online?
Oh. That's it. 2 drives are in offline state...
--
Przemysaw Maciuszko
Agora SA
Mustafa Baytar,
Yes!!! you can retrieve expired data by restoring old database.
All the best
C.R.Chandrasekhar.
Systems Executive.
Tivoli Certified Consultant (TSM).
TIMKEN Engineering Research - INDIA (P) Ltd., Bangalore.
Phone No: 91-80-5536113 Ext:3032.
Email:[EMAIL PROTECTED]
Enable a dbbackuptrigger.
- Original Message -
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Tuesday, June 24, 2003 6:41 AM
Subject: help:recovery log mode
Hi all,my logvol have total space only 300MB and my log mode is
rollforward,and my hard disk have no more sapce.About 1
Update the device class mount retention option for 1 minute.
- Original Message -
From: Przemysaw Maciuszko [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Tuesday, June 24, 2003 7:14 AM
Subject: TSM on AIX and 3494 library problem...
Hello.
Some time ago we had a problem with 'no drives
Hi all,my logvol have total space only 300MB and my log mode is
rollforward,and my hard disk have no more sapce.About 1 month
later ,the space will be fulled,how can I solve this?
As per the Admin Guide manual, doing BAckup DB will clear your
Recovery Log, giving you space to continue processing.
Is the order of the volumes an important consideration
when performing a loadformat command. For example is
there a difference between:
dsmserv loadformat 1 /dev/rdsk/c1t4d0s 12
/dev/rdsk/c1t8d0s0 /dev/rdsk/c1t8d0s1
/dev/rdsk/c1t8d0s3 /dev/rdsk/c1t8d0s4
/dev/rdsk/c1t9d0s0 /dev/rdsk/c1t9d0s1
anyone knows a documentation where we can find the changes about the
messages in the actlog ?
ie with 5.1.7.0 the ANE4987E message changed.
The space between folder and file name has been removed.
David - The front matter of the manuals carry a Summary Of Changes, and the
Technical Guide
Nope!
- Original Message -
From: Douglas Currell [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Tuesday, June 24, 2003 9:10 AM
Subject: Loadformat volume order
Is the order of the volumes an important consideration
when performing a loadformat command. For example is
there a
Same situation here. We have a 3584 with 12 drives that have been in use
for about a year. We pump about a Terabyte of data through them everyday,
and our cleaning tape has been used twice in the past year. We have had
numerous tapes get stuck in drives, and had to have IBM come out and take
I'm a little bit confuse between database in AIX client and database in TSM in term of
data expiry. I have done a necessary setting at management class in TSM web but the
data does not expired when the time come. Please advise
Interesting. I have had an IBM 3584 library with (8) LTO1 drives, FC attached
for over a year with no problem. Cleaning tape was installed initially and
autoclean turned on on the library. Tape has not been used yet!. I backup
nearly 700GB of data a day and make offsite copies. Don't do a lot
If TSM handles cleaning,it would be great to have CLEANFREQuency=ASNEEDED
or a value. None wont help you much in that case. Use None if your library
handles cleaning..
//Henrik
According to a memo I received from IBM, the LTO
drives do NOT require periodic cleaning.
The only time ours got cleaned is when we noticed
that auto cleaning was not occuring, and before we
got the memo.
Now, we have had a few tapes stuck in drives for
various reasons, and many unexplained
Hello everyone!
I am still having issues with the lan-free verification. I cannot tell if
the data went lan-free or if it just went directly to tape due to the
management class that was specified. Below I have included the activity
log and output from the storage agent. It seems that the
According to a memo I received from IBM, the LTO
drives do NOT require periodic cleaning.
I would imagine, then, that the memo goes on to describe the
library cleaning tapes as decorative accessories? ;-)
Richard Sims, BU
Thomas Denier [EMAIL PROTECTED] wrote:
We have been having problems with a Solaris client since we 'upgraded' its
client code from 4.1.2.0 to 5.1.6.0. The 'query node' command reports the
Solaris level as 5.8. The server is at 5.1.6.2 and runs under OS/390.
The client error log is showing
Hi Joni,
Apparently my email never made it to you. Here is what I sent you last
week (hopefully this will show up on ADSM-L):
There was a problem with the LAN-free ending statistics that is fixed in
5.1.6.0. I just checked, and the APAR number is IC35148.
Issue: We unfortunately lost two disks on a RAID 5 array that contained
the database, recovery log, and primary diskpools. Compounding the
problem the volhist.bak and devconfig.bak files were stored on the same
disk array (we had a nightly script in place to copy to an AFS location
but it had
Goodmorning everyone,
Can anyone please let me know if they are using Netapp for DB volumes i.e.
Filer.
Is there any web documentation on Netapp . I can't get any quick reference
on netapp.com???
I am trying to search WAFL (Write anywhere file Layout ) utility explanation
on measure_layout...
There is an APAR for this, IC36511.
Regards,
Andy
Andy Raibeck
IBM Software Group
Tivoli Storage Manager Client Development
Internal Notes e-mail: Andrew Raibeck/Tucson/[EMAIL PROTECTED]
Internet e-mail: [EMAIL PROTECTED]
The only dumb question is the one that goes unasked.
The command line is
On Tue, 24 Jun 2003 12:49:49 +0200
Przemys³aw Maciuszko [EMAIL PROTECTED] wrote:
how is the mount retention parameter of the dev-class set?
I think standard (60 minutes)
60 minutes??? I hope you have only one storagepool in that library, on our
3494 we use 2 minutes mount retention,
Hello David,
Formally, it seems there is no 'change' of messages between versions
A message may be new or no more available (or not documented, explicitly in a chapter
of MCodes, or not explicity)
but not modified.
But yes, there are 'spaces-blanks variations' around variables (filenames,
Richard --
I seem to recall that one of the advantages of LTO was that the tapes
themselves were self-cleaning to an extent.
I have 4 cleaning tapes in the library; we've manually used one of them 11
times (more for checking out drive problems early on than for drive
cleaning). I've seen ONE
Richard,
The tape is a genuine IBM Cleaning cartridge that came with the library.
Per the Storwatch Specialist:
VOLID is CLNI81L1 and is in element address 1025 (3584-L32 library).
Remaining Cleanings is 50. (I think that's the number of cleanings on
these cartridges ?)
Storwatch shows this
All,
If I am upgrading my servers and clients to 5.2 for the added functionality,
don't I need the license package that comes with the CD? The TIVsmSlic which
is the license Package and it changes every version, needs to be
reinstalled, what it the purpose of having the software online? We have
I've had a few tapes stuck in drives. The two problems that have
caused that here are drive/library microcode and physical tape
problem. There have been about three tapes that had the leader
pin cocked and once in a drive, the drive couldn't eject it.
What I hear on this one is that IBM
I've had a few tape stuck in drives here. Problems have been
either drive/library microcode (now updated) or physical problem.
Three tapes have had leader pin cocked and once in drive, the drive
couldn't eject them.
IBM suspects tapes are being dropped. I can't disagree with that,
2 of the 3
yes it does...i can dig it up and send it to you if
you'd like. :)
-Original Message-
From: Richard Sims [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Date: Tue, 24 Jun 2003 09:06:50 -0400
Subject: Re: Interesting LTO fault's symptom
According to a memo I received from IBM, the LTO
drives do
Look in the accounting logs.
If it went LAN-free, there'll be a record for that session in the
dsmaccnt.log file on the CLIENT;
If it went over the LAN, there'll be a record for that session in the
dsmaccnt.log file on the SERVER.
These files usually live in /usr/tivoli/tsm/server/bin or something
Hi Lindsay,
I appreciate your help in this forum. But this place should not be used to
sell any goods (servergraph for instance), it is a technical forum.
Regards,
René LAMBELET
NESTEC SA
GLOBE - Global Business Excellence
Central
My advice about using accounting logs to verify lan-free or not has nothing
to do with Servergraph. We're big fans of TSM - I hope that advice was
helpful to Joni.
The viewacct script is a free offering - it helps to see what's in the
activity log.
Yes, it's on our website - I'm too lazy to cut
Follow-up on an older issue:
In reviewing the TSM server documentation, I happened to note the
following in the online help, which suggests a solution:
tsm: STORMAN_SERVER1help
1 - Using Syntax Diagrams
...
11 - Using Continuation
Firstly, welcome to the list. I would recommend that you browse the
QuickFacts that wise Richard has put together at:
http://people.bu.edu/rbs/ADSM.funcdir whenever you have questions about
ITSM. Secondly, keep an eye out for monthly FAQ's put out by Mark
Stapleton (search ADSM.ORG for previous
I configured my dsm.opt files on each clustergroup, like this:
NODENAMECRITC
PASSWORDACCESS GENERATE
TCPSERVERADDRESS180.175.193.77
DOMAIN E:
TCPCLIENTADDRESS180.177.74.25
CLUSTERNODE YES
ERRORLOGNAMEE:\TSM\DSMERROR.LOG
1. maybe this one:
http://msgs.adsm.org/cgi-bin/get/adsm0211/930.html
-Original Message-
From: Martin Jeppesen [mailto:[EMAIL PROTECTED]
Sent: 23 June 2003 17:20
To: [EMAIL PROTECTED]
Subject: Navision backup and SQL error
Hi all
Just joined the list and have 2 questions waiting!
1.
We
Hi all SQL gurus!
I am going to a disaster recovery shortly and I have the users asking if
there is any select statement or method to find all active files, what
tapes these files are on and the order that they are on the tape for each
client for the offsite tape copies. Is this possible? And
I am going to a disaster recovery shortly and I have the users asking if
there is any select statement or method to find all active files, what
tapes these files are on and the order that they are on the tape for each
client for the offsite tape copies. Is this possible? And if so, how
intensive
We have just put the 5.1.7 PTF for the MVS/OS-390 TSM Server on the test
LPAR. Although it cannot be tested extensively, I try to do every possible
task that is possible. We upgraded to a Magstar 3494 (3590 12GB) last
year, which I use for all of TSM except the Archive's. Instead the
Archives
Below is a question from our Oracle DB...Any input please!
Will you contact IBM and find out if they have an API to interface
between Oracle's OEM and Tivoli?
Thanks, Mark Hayden
Informations Systems Analyst
E-Mail: [EMAIL PROTECTED]
If OEM uses RMAN yes it's called: Tivoli Data Protection (TDP) for
Oracle. thanks!
--Justin Richard Bleistein
Unix/TSM Systems Administrator (Sungard eSourcing)
Desk: (856) 566 - 3485
Cell:(856) 912 - 0861
Email: [EMAIL PROTECTED]
Mark Hayden
Below is a question from our Oracle DB...Any input please!
Sorry, I should have put more in my message. We are running TDP 2.2 for
Oracle, so we have installed both the cTSM client and the TDP. This
resides on a Unix box running Oracle 8.Both the client and the TDP
have a API to Install, and
In a message dated 6/24/2003 3:59:15 PM Eastern Standard Time,
[EMAIL PROTECTED] writes:
Below is a question from our Oracle DB...Any input please!
Will you contact IBM and find out if they have an API to interface
between Oracle's OEM and Tivoli?
Thanks, Mark Hayden
Informations Systems
Hi All, This is another question to one I already have out there. What
we want to be able to do in a short disc., is have TSM call our TDP
scripts from Oracle Enterprise Manager instead of creating multiple
scripts. So TSm would call OEM and run the correct TDP backupThis
may be asking too
I don't believe there is any such document.
In the case of ANS/ANE4987E, the change was made per APAR IC35141, which
called our attention to the blank space. The blank space was not
intentional, and thus was corrected; the object name is supposed to be
shown as a single entity with no
HI all,
I'm running TSM server 4.2.3.3 on aix 5.1. TSM 5.2 testing starts as soon as the
media arrives.
I currently have several tape pools and associated copy pools writing to a 3494, all
using the same device class. Copypool tapes are sent offsite daily.
I've acquired a second 3494 which is
Steve,
Just to be sure that I understand you, you have PRIMARY storage pool A
and COPY stgpool B both in library 1. You now have another library 2
and would create a new storage pool C - You would like to move all the
media from B to C?
OK, here is an option that I though of quickly (hopefully
I also though of this:
Again, swaping the roll of the libraries as I described in my previous
message - you could:
* Mark all your primaries as DESTROYED
* Update the stgpool so that MAXSCR=0
* Define a new STGPOOL for the new library, and have your backups go to
it,
* Restore STGPOOL to the new
55 matches
Mail list logo