Sorry, might not be 100% Sunray user specific, but I'd like to know if
anyone has used this product in a Sunray setup or at all, even just a
Solaris Workstation? I've got users of both setups to think of, but
mostly Sunray users.
I just saw it on The Register. Company called Transitive and
Hello,
I'm trying to lock down the preferences in the firefox that comes
installed with Solaris 10 08/07
In the past firefox wasn't preinstalled and you either download a
version the Sun Beijing team release on the Mozilla site or you used the
Blastwave version. I've always prefered the one
Ok at first I thought I applied some patches that messed up Flash. But
now I think it somehow related to the Sunray software.
I have two sunray servers. On both of them if I go to youtube or any
other sites that use flash to stream videos the browser freezes. It
seems like it is downloading
you tried viewing these Flash animations from the console?
-Bob
Aaron Wilson wrote:
Ok at first I thought I applied some patches that messed up Flash.
But now I think it somehow related to the Sunray software.
I have two sunray servers. On both of them if I go to youtube or any
other sites
.
There are other, more efficient approaches, but
this is very simple and falls out from the way
replication works.
-Bob
Aaron Wilson wrote:
I've recently run into an problem where any X login fails. It doesn't
matter if it's at the box itself, from a sunray, or an Xnest
session. Ssh'ing into the server
I've recently run into an problem where any X login fails. It doesn't
matter if it's at the box itself, from a sunray, or an Xnest
session. Ssh'ing into the server works fine just fine.
Sun doesn't seem to have any more ideas than i do. Logs aren't very
helpful either.
Anyway I'm
On both of my Leopard 10.5.2 prefixed machines after a fresh sync I get:
$ emerge portage
These are the packages that would be merged, in reverse order:
Calculating dependencies /
!!! All ebuilds that could satisfy sys-apps/portage have been masked.
!!! One of the following masked packages is
, Fabian Groffen wrote:
Hi Aaron,
On 05-02-2008 13:30:46 -0700, Aaron Wilson wrote:
I'm attempting to compile openssh with kerberos support on a system
running
OS X 10.5.1. app-crypt/mit-krb5 depends on sys-libs/ss which is
failing at
the install stage of the emerge. The output is below
Please
should be something like
mkfontdir)
Regards: Romeo Ninov
http://www.geocities.com/romeo_ninov/
Freedom, Sancho.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Aaron Wilson
Sent: Tuesday, January 29, 2008 10
I'm having some login issues. I can't login using, CDE, JDS or Failsafe
from the console. Also doesn't work from a Sunray session or Xnest session.
I enter username and password and the screen goes black, I get an hour
glass, and then it kicks me back out to the Login prompt. I can however
. They appear to be the same
though, fonts.dir files and all.
Aaron Wilson wrote:
No I haven't. I wasn't aware of that command.
Not sure about how to go about using it either.
The error is kind of vague and doesn't tell me where I should run that
command.
Directory missing fonts.dir Which one
P.S.M. Swamiji wrote:
Aaron Wilson wrote:
No version of Skype for Solaris. Skype 1.4 is available for Linux.
The Linux version supports Video now too. I imagine you couldn't do
video from a Sunray though unless you could somehow use an IP Camera.
I think Skype on Linux uses ALSA so there may
No version of Skype for Solaris. Skype 1.4 is available for Linux. The
Linux version supports Video now too. I imagine you couldn't do video
from a Sunray though unless you could somehow use an IP Camera. I think
Skype on Linux uses ALSA so there may be sound problems if you ran the
Linux
If you go that route you might checkout blastwave. They have squid and
squidguard packages. The two together work great for content filtering.
Aaron
Brad Lackey - US-SW Desktop Product Lead wrote:
Why not use an HTTP proxy or SOCKS server which requires
authentication? THen it's
We just installed OpenOffice 2.3 so we can start supporting ODF files
How can I change the file associations so SXC, SXW, XLS, DOC, etc
default to OpenOffice instead of StarOffice for all users?
Aaron
___
Solaris-Users mailing list
Bacula?
You can get bacula off blastwave. It should do what you want. I've got
it setup in my case to do full backups on different tapes each day. It
should do sequential backups too though.
Ing. Marcos René A. Moreno wrote:
Hello
That it forms can I carry out backups in tape, sequential,
I agree and I apologize for the Run something else answer I previously
gave. I've been down this exact road before. I asked this question on
the OpenSolaris mailing list once. I basically asked, Solaris is
continually gaining market share in the x86 world, has anyone heard if
Adobe plans to
I've read the warning on the Bootstram Process page:
Bootstrapping on OS X 10.5 Leopard unfortunately is NOT working at
the moment. Please bear with us while we wait for Apple to finally
release their sources.
I've noticed that the Darwin 9.0 sources are up (
:
On 08-11-2007 11:50:40 -0700, Aaron Wilson wrote:
I've read the warning on the Bootstram Process page:
Bootstrapping on OS X 10.5 Leopard unfortunately is NOT working at
the
moment. Please bear with us while we wait for Apple to finally
release
their sources.
I've noticed that the Darwin 9.0
That should work, but it only prevents a user from getting a session on
that server if they insert their card. What I've noticed is my users
will log out, but not pull their card from the sunray, so they won't be
switched over to the available server. I usually run
`/opt/SUNWut/sbin/utadm -f'
Anyone know if there is anyway to download the latest Solaris release
with wget?
The sun download page only lets me download from my browser or with the
Sun Download Manager.
I want to throttle the download speed and not affect our employees too
much with a slow Internet connection. It
Answered my own question
I used wget with a --limit-rate flag and a -O to rename the file
Aaron Wilson wrote:
Anyone know if there is anyway to download the latest Solaris release
with wget?
The sun download page only lets me download from my browser or with
the Sun Download Manager.
I
Any new word on this now that IBM is selling Intel based servers with Solaris
installed? I manage with Evince, gpdf, xpdf, etc. It would be nice for our
Engineers to be able to use Adobe Reader 8 so they can view 3d PDFs.
This message posted from opensolaris.org
series of Adobe Reader if it would
keep the griping down. Heaven forbid a PDF doesn't render right in
Evince and they have to try to open it in xpdf.
James Carlson wrote:
Aaron Wilson writes:
Any new word on this now that IBM is selling Intel based servers with Solaris
word on Reader for
Solaris x86. That I can understand.
Now back to important stuff.
Aaron
James Carlson wrote:
Aaron Wilson writes:
Intel based IBM servers + Solaris 10 x86 = greater Solaris x86 market
share = greater demand for Adobe Reader on Solaris x86br
br
So is there any
I'm trying to compile some C code that uses OpenMP. I've compiled
gcc-4.2.0 with the openmp USE flag
in OS X 10.4.10. I've selected it with gcc-config (and re-sourced ~/
Library/Gentoo/etc/profile)
$ gcc-config -l
[1] i686-apple-darwin8-4.0.1
[2] i686-apple-darwin8-4.2.0 *
But when I try
I'm not actually sure that this is specific to use of gomp. Could
this be a problem with my gcc install in general?
On Jul 19, 2007, at 2:03 AM, Fabian Groffen wrote:
Right, I think gcc-config doesn't copy that lib to the place gcc is
looking for it. I'm affraid the lib is installed in
So what can I do to help resolve this problem? Is this something that
needs to be changed in the configure options for gcc? or would this
reside in some of the patches for prefixed gcc?
Thanks,
Aaron
On Jul 19, 2007, at 3:49 AM, Fabian Groffen wrote:
On 19-07-2007 11:45:55 +0200, Duft
kill it
2007/7/17, Aaron Wilson [EMAIL PROTECTED]:
This should be a no brainer. I'm not using sendmail.
-bash-3.00# svcs -a | grep sendmail
disabled Jun_29 svc:/network/smtp:sendmail
-bash-3.00#
But I still get these errors.
Jul 16 13:31:01 slosunray1 sendmail[14355]: [ID 702911
I have a couple build 55 installs.
Each of these has issues with file transfer speeds. Specifically FTP and NFS.
It's been awhile since I've messed with the NFS transfers cause my test
environment doesn't really need it. That's at work but I also run this at home.
If I'm browsing the web I can
Mitel/Sun will have a booth demonstrating this more at VoiceCon in San
Francisco in case anyone is interested.
http://www.voicecon.com/sanfrancisco/
Ivar Janmaat wrote:
I like the phone integration with Sun Rays a lot!
This will change the Sun Ray proposition in a positive way.
I noticed,
I found a bit of a kludge that seems to temporarily fix the problem
without modifying the standard OS X environment. I added the
following to my ~/.bashrc
# if we are in the prefixed gentoo
if `echo $SHELL|grep Gentoo 1/dev/null 21` ; then
# source prefixed profile
source
I've just bootstraped a fresh install of OS X 10.4.10 according to
the documentation. I tried using the startprefix script that is
mentioned but the prefixed bash doesn't source the prefixed profile
and my PATH is not set.
Should executing the startprefix (essentially executing ~/Library/
On Jul 8, 2007, at 10:38 AM, Fabian Groffen wrote:
This is not enough, you need to start a login shell i.e. bash -l.
This is all that startprefix does, right?
Do you get a Gentoo prompt (providing
that you don't change your prompt in your own config files)?
Nope, no Gentoo prompt, no PATH.
that bash *did* work until a month ago
and then
broke for some reason.
To work around this, you can create a link from ${eprefix}/etc/
profile to ~/.profile
Kind regards,
Elias
On Jul 8, 2007, at 6:38 PM, Fabian Groffen wrote:
On 08-07-2007 10:29:18 -0600, Aaron Wilson wrote:
I've just
mtx is available from blastwave.
http://www.blastwave.org/packages.php/mtx
I too am testing bacula on Solaris using the blastwave packages. I don't
have an autochanger though, just a single tape dlt drive.
One thing I had to do is specify the tape backup device in the
bacula-sd.conf as
I want I want I want
Seriously though I want one, well actually probably two. One IP PBX for
each of our offices and about 80 of those Sunray/phone gizmos.
How much? :)
That is really cool. Your extension hotdesks with you.
Looking at the Mitel site. Doesn't look like they've recovered
Is there a simple way to adjust the MANPATH so it is permanent and
affects all users?
I know I can edit /etc/default/su and /etc/default/login to change the
default PATH for users. Putting MANPATH in that file doesn't seem to
work. I really don't want to mess with .profile or .bashrc files or
I don't know about Leigh, but my company has several USB Symbol LS2208
Barcode Scanners.
In fact I'm going to be ordering two more here shortly.
In our case we run Solaris 10 x64 w/ SRSS 3.1. Not sure if that will
matter for you. I just wanted to make it clear we do not use CAM,
Windows
I sent them an email as well and they provided the download url and a
temporary license for testing.
Dave Partington wrote:
Fitra,
Just go to the URL below and you can request a download of Win4solaris
Pro.
www.vbridges.com
Date: Tue, 8 May 2007 19:16:55 -0700
From:
with no valid links or
e-mail addresses that I could find.
-Bob
Aaron Wilson wrote:
I sent them an email as well and they provided the download url and a
temporary license for testing.
Dave Partington wrote:
Fitra,
Just go to the URL below and you can request a download of
Win4solaris Pro
A little off topic but this may be of help to some in this group.
Flash 9 beta works fine on Solaris 10 x86 with SRSS 3.1
http://labs.adobe.com/downloads/flashplayer9.html
Not sure about Sparc.
I remember the colors being swapped back in the day when my company ran
Sun's Linux JDS 2. Upgraded
Are you using CDE or JDS/Gnone? You mention CDE in the past tense so I
imagine you are using JDS now.
Which means you're probably using gnome-terminal. With that you just go
to:
Edit - Keyboard Shortcuts... Scroll down to the bottom and click on
Contents and hit Back Space.
Any other
My systems are fully patched for DST as of a week ago, however users are
noticing Alarms they have set in Evolution are showing up an hour late.
Anyone else noticing this?
___
Solaris-Users mailing list
Solaris-Users@filibeto.org
I get what you are trying to do and can't help with the way your doing
it. I just know from my experiences I've never been satisfied with the
performance of printers when connected to Sunrays. In our case it's
always been USB printers, but configured in Cups as serial printers.
We recently
Sorry I can't be any help but we run SunRays at my work with a similar
setup. /home is a nfs mount to our NAS. We've run SRSS on both the
Linux version of JDS2 and now Solaris 10. In either case gftp works
fine. On JDS2 I built gftp from source I believe, but on Solaris 10 we
are using the
I'm not sure about what exactly codabar or telepen means, but we have
two sunrays with handheld USB BarCode scanners. We use Symbol LS 2208s
and they work really well.
http://www.symbol.com/ls2208
Aaron
Leigh Porter wrote:
Hiya,
We have scanners that are USB HIDs so the SunRay should see
I'm currently looking to replace one of our Sunray 1G dual head groups
and put in a widescreen lcd. I would really like to do this with the
monitors native resolution. All the monitors I'm looking at now seem to
either be 1440x900 or 1680x1050.
Either of these works for me as long as the
to try, that would be cool.
--
Aaron Wilson
Ernie Ball, Inc.
I.T. Department
aaron at ernieball.com
NOTICE: This e-mail is for the sole use of the intended recipient(s).
Any unauthorized review, use, disclosure or distribution of this e-mail
or its contents is strictly prohibited. If you
I'm getting this error when trying to make ccrtp 1.5.0 on Solaris 10 on
Opteron processor
incqueue.cpp:692: error: `timersub' was not declared in this scope
incqueue.cpp:692: warning: unused variable 'timersub'
gmake[3]: *** [incqueue.lo] Error 1
gmake[3]: Leaving directory
Hi, this is my first submission to gentoo-alt (or any mailing list
for that matter) so please correct me if I've done something wrong.
I've just updated to the latest svn prefixed portage. I'm compiling
using gcc version 4.0.1 (Apple Computer, Inc. build 5341) built
from portage with Apple
probably mask the ones that I know
that don't work (fortran and gcj)
On 12-11-2006 11:17:52 -0700, Aaron Wilson wrote:
Hi, this is my first submission to gentoo-alt (or any mailing list
for that matter) so please correct me if I've done something wrong.
I've just updated to the latest svn prefixed
To fix (actually, its still compiling now) my gcc-apple issue, I
added sys-devel/gcc-apple -fortran to /Library/Gentoo/etc/portage/
package.use so that gcc-4.2 continues to compile with fortran support.
I need gcc-4.2 for it's gomp (OpenMP, http://en.wikipedia.org/wiki/
OpenMP) support. I
On Nov 12, 2006, at 12:10 PM, Fabian Groffen wrote:
For anyone else who might be interested (I know you already saw this,
grobian) the steps I took to install gcc-4.2 are listed 2/3 of the
way down on this forum page: http://forums.gentoo.org/viewtopic-
p-3713019.html with the fix for an
I'm trying to compile and install ccrtp on Solaris 10. The configure
seems to work fine but it errors almost immediately when trying to
perform make.
Here is the output of configure and make
-bash-3.00# ./configure
checking build system type... i386-pc-solaris2.10
checking host system type...
I did search the archive, but apparently I didn't pick the right query.
Thanks,
Aaron
On Sep 19, 2006, at 1:23 PM, Brian J. Tarricone wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 9/19/2006 11:21 AM, Aaron Wilson wrote:
Hello, first time submitting, hope I'm doing this right
I'm using The Gimp 2.0 that came with Solaris 10. The problems is there
is no Print option. I've replaced the default printing setup using the
CUPS pkgs of the companion CD as per the instructions on this page
http://www.lengers.com/?p=12
I've done this setup on 8 machines now and printing works
Has anyone been able to record sound from a SunRay? I know the Mic works
cause I am able to record using it on another machine.
The system is running the Linux version of JDS 2 with SRSS 3.0. When I
attempt to record with Sound Recorder it appears to record but the
application freezes when I hit
is powered on and functioning properly.
I had sent an email to the Sunray USB support people and basically all I
got back was
---
From:
frits vanderlinden
[EMAIL PROTECTED]
To:
Aaron Wilson
[EMAIL
Anyone had any luck with the Keyspan 19HS USB to Serial adapter? I've
got it plugged in and the green LED flashes slowly. According to the
Windows manual The Keyspan adapter software and hardware are working
properly. The Keyspan serial port is available for use.
Of course that would be fine and
I'm trying to project a virtual runway image on the HUD and I do not
fully understand the FlightGear coordinate system. I am using the
following code to get the four corners on the runway and seem to
correspond to the absolute_view_pos vector when located on the
corner of the runway. I am trying
Paul,
You may want to look into the gluUnProject(...) function.
Aaron
At 04:29 PM 11/4/2004, you wrote:
Thanks, that makes a lot more sense to me now.
I'll see what I can glean from the PPE code.
On Thursday, 4 November 2004 23:06, Norman Vine wrote:
RE: [Flightgear-devel] Screen to
Developers,
I am
planing on developing a HUD instrument to display a virtual outline of
the active runway on the HUD. Is there any developer(s) working on
this task? If not, can anyone tell me how I can get the aircraft's
velocity vector and runway vector in Cartesian coordinates.
Thanks,
Aaron
, you wrote:
Aaron Wilson wrote:
Developers,
I am planing on developing a HUD instrument to display a virtual
outline of the active runway on the HUD. Is there any developer(s)
working on this task? If not, can anyone tell me how I can get the
aircraft's velocity vector and runway
I just compiled the latest stable source 0.9.6 and the keyboard commands
were not working. The only way I could get them to fire the
binded command was to set the keys to repeatable (i.e.
repeatabletrue/repeatable). Has anyone else had
this problem?
Thanks,
Aaron I. Wilson
AST: Computer
I'll build new exim packages for this today,
Aaron
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
I'll build new exim packages for this today,
Aaron
101 - 167 of 167 matches
Mail list logo