Re: [Elecraft] K3s Low sub receiver volume

CONFIG: L-MIX-R set to A b? CONFIG:SPKRS 2? Anything plugged into speaker jack? Mono plug or stereo? 73, Bob, N6TV On Feb 27, 2018 6:41 AM, "Thomas Doligalski" wrote: > Larry W0LRF wrote earlier this month: > > > There have been a few posts on this subject, but none had

Re: [Elecraft] K3/P3 RIT / XIT macro oddities (kinda long)

On Mon, Feb 12, 2018 at 3:52 PM, Ken K6MR wrote: > If you have a K3 without the Sub Rx, turning on XIT will change the > transmit frequency on whichever VFO is set to transmit: VFO A if Split is > off, VFO B is split is on. The receive frequency is not affected. XIT > affects VFO

Re: [Elecraft] Y-Adapter for K3S ACC - KPAK3AUX - KPA-1500

gt; wrote: What about if you have the earlier Y-Box and have a KPA500 on it already? How do you add the KPA1500? Tnx N2TK, Tony -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Bob Wilson, N6TV Sent: Monday, February 12, 2018 2:50

Re: [Elecraft] Y-Adapter for K3S ACC - KPAK3AUX - KPA-1500

On Mon, Feb 12, 2018 at 11:41 AM, j...@kk9a.com wrote: > Don't use VGA products. Elecraft sells a Y adapter that will work > perfectly and N6TV sells a Y-Box to connect up to four devices to the ACC. > > John KK9A > Correct, plus with the new version 2.1 Y-BOX, you don't have to

[Ubuntu-x-swat] [Bug 1748177] [NEW] Recurring crash during updates package libinput10:i386 1.6.3-1ubuntu1~16.04.1 failed to install/upgrade: package is in a very bad inconsistent state; you should re

Public bug reported: Recurring ProblemType: Package DistroRelease: Ubuntu 16.04 Package: libinput10:i386 1.6.3-1ubuntu1~16.04.1 ProcVersionSignature: Ubuntu 3.13.0-96.143-generic 3.13.11-ckt39 Uname: Linux 3.13.0-96-generic i686 ApportVersion: 2.20.1-0ubuntu2.15 Architecture: i386 Date: Thu Feb

[Bug 1748177] [NEW] Recurring crash during updates package libinput10:i386 1.6.3-1ubuntu1~16.04.1 failed to install/upgrade: package is in a very bad inconsistent state; you should reinstall it befor

Public bug reported: Recurring ProblemType: Package DistroRelease: Ubuntu 16.04 Package: libinput10:i386 1.6.3-1ubuntu1~16.04.1 ProcVersionSignature: Ubuntu 3.13.0-96.143-generic 3.13.11-ckt39 Uname: Linux 3.13.0-96-generic i686 ApportVersion: 2.20.1-0ubuntu2.15 Architecture: i386 Date: Thu Feb

Re: [Elecraft] Y-BOX v1.3 Closeout Pricing; New Y-BOX v2.1 Now In Stock

On Fri, Jan 26, 2018 at 5:53 AM, j...@kk9a.com wrote: > I have original versions of the Y-Box. > Both of mine work perfectly. Also Bob is very responsive and a great guy > do business with. > Thanks John. > I assume that the amplifier port has certain terminals not connected,

[Elecraft] Y-BOX v1.3 Closeout Pricing; New Y-BOX v2.1 Now In Stock

To review, the Y-BOX provides a reliable and convenient way to connect the K3 ACC port to multiple devices, including the KAT500, KPA500, KPA1500, band decoders, DigiKeyers, RemoteRig boxes, etc. The Y-BOX replaces any 15-pin Y-Cables you may already be using. While supplies last (I only have a

Re: [swift-dev] State of String: ABI & Performance

> On Jan 11, 2018, at 9:46 PM, Chris Lattner via swift-dev > wrote: > >>> >>> Finally, what tradeoffs do you see between a 1-word vs 2-word string? Are >>> we really destined to have 2-words? That’s still much better than the 3 >>> words we have now, but for some

[swift-dev] preliminary Swift 5 branch

Yesterday the LLVM project created its release branch for version 6.0, and we plan to align with this branch for Swift 5.0. The swift-llvm, swift-clang, and swift-compiler-rt repos on GitHub have been updated with new branches named "swift-5.0-branch" that track the LLVM 6.0 branches. On

[Elecraft] Final Reminder: Y-BOX Sale ends tonight at Midnight Pacific Time

and M/F extension cables with all 15 pins wired are also available for purchase with your order of a Y-BOX. Cables are not sold separately unless you previously purchased a Y-BOX from me. Happy New Year! 73, Bob, N6TV On Sat, Dec 30, 2017 at 4:59 PM, Bob Wilson, N6TV <n...@arrl.net>

[Elecraft] Y-BOX New Years Day Sale + Announcing New Version for KAT500 / KPA500 / KPA1500 / SteppIR Owners

In honor of the New Year, all Y-BOX orders received before midnight Pacific Time New Years Day (by 2018-01-02 08:00 UTC) will get $10 off each unit, while supplies last. This applies to the original model only, with all 15 pins of the K3 ACC connector wired in parallel to all five DE-15

[PATCH] D41425: [darwin][driver] Warn about mismatching --version-min rather than superfluous --version-min compiler option

bob.wilson accepted this revision. bob.wilson added a comment. This revision is now accepted and ready to land. Eventually it would be nice to also warn about redundant -m*-version-min options, but for now I agree that it would be best to start with warning only when the options are different.

[PATCH] D40998: [driver][darwin] Take the OS version specified in "-target" as the target OS instead of inferring it from SDK / environment

bob.wilson accepted this revision. bob.wilson added a comment. LGTM Repository: rC Clang https://reviews.llvm.org/D40998 ___ cfe-commits mailing list cfe-commits@lists.llvm.org http://lists.llvm.org/cgi-bin/mailman/listinfo/cfe-commits

[PATCH] D41076: [driver][darwin] Set the 'simulator' environment when it's specified in '-target'

bob.wilson accepted this revision. bob.wilson added a comment. LGTM Comment at: lib/Driver/ToolChains/Darwin.cpp:1603 // Recognize iOS targets with an x86 architecture as the iOS simulator. - if (Platform != MacOS && (getTriple().getArch() == llvm::Triple::x86 || -

[PATCH] D41087: [Preprocessor] Implement __is_target_{arch|vendor|os|environment} function-like builtin macros

bob.wilson added a comment. Thanks! LGTM Repository: rC Clang https://reviews.llvm.org/D41087 ___ cfe-commits mailing list cfe-commits@lists.llvm.org http://lists.llvm.org/cgi-bin/mailman/listinfo/cfe-commits

[PATCH] D41087: [Preprocessor] Implement __is_target_{arch|vendor|os|environment} function-like builtin macros

bob.wilson added a comment. I'm concerned here about the check for the names as written vs. the canonical names. @compnerd pointed out one specific case with armv7, and I see that you've got special handling for "darwin", but I think there are more. What about "arm64" vs. the canonical

[Bug 1737543] [NEW] package libinput10:i386 1.6.3-1ubuntu1~16.04.1 failed to install/upgrade: package is in a very bad inconsistent state; you should reinstall it before attempting configuration

Public bug reported: Recurring failure after system updates. I do not know the severity of this failure as I am new to Ubuntu. ProblemType: Package DistroRelease: Ubuntu 16.04 Package: libinput10:i386 1.6.3-1ubuntu1~16.04.1 ProcVersionSignature: Ubuntu 3.13.0-96.143-generic 3.13.11-ckt39 Uname:

[Ubuntu-x-swat] [Bug 1737543] [NEW] package libinput10:i386 1.6.3-1ubuntu1~16.04.1 failed to install/upgrade: package is in a very bad inconsistent state; you should reinstall it before attempting co

Public bug reported: Recurring failure after system updates. I do not know the severity of this failure as I am new to Ubuntu. ProblemType: Package DistroRelease: Ubuntu 16.04 Package: libinput10:i386 1.6.3-1ubuntu1~16.04.1 ProcVersionSignature: Ubuntu 3.13.0-96.143-generic 3.13.11-ckt39 Uname:

[PATCH] D40998: [driver][darwin] Take the OS version specified in "-target" as the target OS instead of inferring it from SDK / environment

bob.wilson requested changes to this revision. bob.wilson added inline comments. This revision now requires changes to proceed. Comment at: lib/Driver/ToolChains/Darwin.cpp:1518-1523 + // Warn about superfluous OS_DEPLOYMENT_TARGET environment variable. + Optional

[PATCH] D40682: [driver] Set the 'simulator' environment for Darwin when -msimulator-version-min is used

bob.wilson accepted this revision. bob.wilson added inline comments. This revision is now accepted and ready to land. Comment at: lib/Driver/ToolChains/Darwin.cpp:1457-1465 if (iOSVersion && (getTriple().getArch() == llvm::Triple::x86 ||

[PATCH] D40682: [driver] Set the 'simulator' environment for Darwin when -msimulator-version-min is used

bob.wilson added inline comments. Comment at: lib/Driver/ToolChains/Darwin.cpp:1457-1465 if (iOSVersion && (getTriple().getArch() == llvm::Triple::x86 || getTriple().getArch() == llvm::Triple::x86_64)) Platform = IPhoneOSSimulator; if

[PATCH] D40682: [driver] Set the 'simulator' environment for Darwin when -msimulator-version-min is used

bob.wilson requested changes to this revision. bob.wilson added inline comments. This revision now requires changes to proceed. Comment at: lib/Driver/ToolChains/Darwin.cpp:1457-1465 if (iOSVersion && (getTriple().getArch() == llvm::Triple::x86 ||

Re: [swift-lldb-dev] [Swift CI] Build Still Failing: 0. OSS - LLDB Incremental - OS X (master) #419

The TestSwiftFoundationTypeNotification failure is still there. For the sake of people at Apple, I filed a radar: Swift CI: lldb assertion failed: 'frame variable notification' returns expected result > On Nov 19, 2017, at 11:59 AM, Andrew Trick wrote: > > There appears to

[Elecraft] Final Reminder: Y-BOX Pre-Thanksgiving Special ends at 0800 UTC today

More info. at https://bit.ly/Y-BOX Thanks for your support. 73, Bob, N6TV On Fri, Nov 17, 2017 at 11:50 AM, Bob Wilson, N6TV <n...@arrl.net> wrote: > All Y-BOX orders received before midnight Pacific Time this Monday, (by > 2017-11-21 08:00 UTC) will qualify for *free domestic

[Elecraft] Y-BOX Pre-Thanksgiving Special - Free Domestic Shipping or Discounted International Shipping

All Y-BOX orders received before midnight Pacific Time this Monday, (by 2017-11-21 08:00 UTC) will qualify for *free domestic shipping via USPS Priority Mail*. Limit: 3 Y-BOXs per customer. International orders received by the same deadline will qualify for discounted International Priority

[PATCH] D39446: [PGO] Detect more structural changes with the stable hash

bob.wilson added a comment. I'm excited to see some progress on this, but since there is overhead to adding a new hashing scheme, I think we should do more before introducing a new scheme. One of the problems with the previous scheme is that is did not take into account nesting. Distinguishing

Re: [Elecraft] K-3 with 4O3A antenna genius

Hi Art, If you're using a separate band decoder like K9YC, no problem, just use the 12V outputs of the band decoder to drive the Antenna Genius. But I assume you want to use the band decoder built in to the Antenna Genius, not a separate box, which means you're setting the dip switches on the

Re: [Elecraft] K3(S) QSK Operation

The 37 WPM jitter issue is actually related to VOX timing (with either QSK or semi-breakin). If you hold the PTT line closed while transmitting, via a foot switch, software-controlled PTT, or an external keyer like a WinKey with a PTT output, you can send as fast as you like, no CW jitter, but

Re: [Elecraft] K3 RX Ant - first try - nothing

On Tue, Sep 5, 2017 at 10:07 PM, Jim Miller wrote: > I have not tried to use Rx ant previously. > > K3 (sn 1442) Manual Rev D pf 43 - I have KXV3 and KAT3. > > Antenna connected to BNC on KXV3 and Rx ant selected on main receiver. > > No receive. > Connect the RX

[Elecraft] Final Reminder: Y-BOX Labor Day Weekend Special ends at 0700 UTC today

0=1> . More info. at https://bit.ly/Y-BOX Thanks for your support. 73, Bob, N6TV On Fri, Sep 1, 2017 at 11:16 AM, Bob Wilson, N6TV <n...@arrl.net> wrote: > All Y-BOX orders received before midnight Pacific Time on Labor Day (by > 2017-09-05 07:00 UTC) will qualify for *free dom

[Elecraft] Y-BOX Labor Day Weekend Special - Free Domestic Shipping

All Y-BOX orders received before midnight Pacific Time on Labor Day (by 2017-09-05 07:00 UTC) will qualify for *free domestic shipping via USPS Priority Mail*. Limit: 3 Y-BOXs per customer. International orders received by the same deadline will qualify for discounted shipping (discounted by

Re: [Elecraft] [K3] FS: Y-BOX (gold) by N6TV $129 + free domestic shipping

The one refurbished Y-BOX has sold. Please order via the web site if you'd like me to build you a brand new one. Thanks. 73, Bob, N6TV https://bit.ly/Y-BOX On Mon, Aug 28, 2017 at 3:58 PM, Bob Wilson, N6TV <n...@arrl.net> wrote: > I have one refurbished "original gold" Y-

[Elecraft] [K3] FS: Y-BOX (gold) by N6TV $129 + free domestic shipping

I have one refurbished "original gold" Y-BOX (a unique 4-way splitter and breakout box for the Elecraft K3/K3S AUX/ACC port) for sale for $129 including free domestic shipping. I will also ship it internationally for a slightly discounted shipping cost (my cost less $6.50). In the same box, I

[Elecraft] Problem & Solution: K3 + Y-BOX + KPA500 + 4O3A Antenna Genius

One of my Y-BOX customers, AMSAT President Barry Baines, WD4ASW, reported a problem when connecting the following devices in parallel to the ACC port of his Elecraft K3: 1. KAT500 / KPA500 2. RemoteRig Interface 3. 4O3A Antenna Genius (in "BCD" mode) Automatic band switching worked

[Elecraft] Update on the Y-BOX breakout box / ACC splitter for the K3 and K3S

To review, the Y-BOX is a flexible 1x4 splitter and breakout box designed to make it easier to connect multiple devices in parallel to the accessory port of an Elecraft K3 or K3S (or to any device with a DE-15 connector, including ACOM amps, the FlexRadio Flex-6000 series, and the 4O3A Antenna

[PATCH] D36563: Add a getName accessor for ModuleMacros

bob.wilson added a comment. Committed in r310622 https://reviews.llvm.org/D36563 ___ cfe-commits mailing list cfe-commits@lists.llvm.org http://lists.llvm.org/cgi-bin/mailman/listinfo/cfe-commits

r310622 - Add a getName accessor for ModuleMacros.

Author: bwilson Date: Thu Aug 10 09:42:46 2017 New Revision: 310622 URL: http://llvm.org/viewvc/llvm-project?rev=310622=rev Log: Add a getName accessor for ModuleMacros. Swift would like to be able to access the name of a ModuleMacro. There was some discussion of this in

Re: [Elecraft] TXD QSD fixed?

Setting CONFIG:TX DLY to 20 ms will shorten the first element (dot or dash) by 20 ms (about). If you're using QSK, it will shorten *every* dot or dash by that amount. The new KSYN3A synthesizers do not change this. Setting CONFIG:CW QRQ ON will make the TX delay much shorter (how much shorter

[PATCH] D36563: Add a getName accessor for ModuleMacros

bob.wilson created this revision. Herald added a subscriber: mcrosier. Swift would like to be able to access the name of a ModuleMacro. There was some discussion of this in https://github.com/apple/swift-clang/pull/93, suggesting that it makes sense to have this accessor in Clang.

Re: [swift-dev] Correspondence between swift-clang and Apple's Clang end user releases

> On Aug 7, 2017, at 1:55 PM, John McCall via swift-dev > wrote: > > >> On Aug 7, 2017, at 3:47 PM, Oleksii Vilchanskyi via swift-dev >> wrote: >> Hello, >> >> I would like to know when a feature >>

Re: [swift-dev] [Swift CI] Build Failure: OSS - Swift Package - Ubuntu 16.10 (master) #1419

Linux but that would be a pretty drastic step. Jim, any progress on getting lldb to work again? > On Aug 3, 2017, at 7:54 PM, Xi Ge <xi...@apple.com> wrote: > > Thank you, Bob! > >> On Aug 3, 2017, at 7:22 PM, Bob Wilson <bob.wil...@apple.com >> <mailto:

Re: [swift-dev] [Swift CI] Build Failure: OSS - Swift Package - Ubuntu 16.10 (master) #1419

We’ll temporarily remove lldb from the PR testing. > On Aug 3, 2017, at 7:04 PM, Xi Ge wrote: > > Do we a radar to keep track of this? the build error seems to be blocking our > PR testing. > > Xi >> On Aug 3, 2017, at 4:11 PM, Mishal Shah via swift-dev

Re: [swift-dev] Updating stable branch to swift-4.1-branch: scheduled for Thursday, Aug. 3

This is done now. It might take a little while for the bots to catch up. Reminder: You should completely remove your entire build directory, including LLVM, when you pick up these changes. Incremental builds will almost certainly not go well. > On Aug 3, 2017, at 9:22 AM, Bob Wilson via sw

Re: [swift-dev] Updating stable branch to swift-4.1-branch: scheduled for Thursday, Aug. 3

Reminder: This is still on track to happen today. > On Jul 31, 2017, at 5:34 PM, Bob Wilson via swift-dev <swift-dev@swift.org> > wrote: > > We now have a swift-4.1-branch of Clang/LLVM, and it is time to update our > “stable” branch to use that. This transition

[swift-dev] Updating stable branch to swift-4.1-branch: scheduled for Thursday, Aug. 3

We now have a swift-4.1-branch of Clang/LLVM, and it is time to update our “stable” branch to use that. This transition will merge in changes to the Swift master branch from the master-next branch that we maintain to work with upstream LLVM. We are planning to make the change this Thursday,

RE: [DOG mailing list] Hoffman Props

ability.to allow for wear considerations. My input for what it’s worth. Bob Wilson From: dog@lists.riverland.net.au [mailto:dog@lists.riverland.net.au] On Behalf Of Greg Wilson Sent: Thursday, 27 July 2017 6:44 AM To: dog@lists.riverland.net.au Subject: Re: [DOG mailing list] Hoffman Props

Re: [Elecraft] Missing first piece of dash or dot when sending CW with K3S USB input with Wintest.

Are you connecting the amplifier to the TX Inhibit pin of the K3 ACC port? Do you have CONFIG:TX INH set to Low=Inh or Hi=Inh? You must first set CONFIG:TECH MD ON to see it. Try changing TX INH to OFF. >From the Expert 2K-FA manual, section 13.3: "All modern transceivers have a delay before

Re: [Elecraft] Missing first piece of dash or dot when sending CW with K3S USB input with Wintest.

I did not experience any problems like that during 24 hours of the IARU contest keying a pair of K3S rigs with Win-Test over the USB line, in full QSK mode, on a single computer (which was running Windows 7 32-bit). With Win-Test's excellent software CW timing, there's usually no need to buy a

Re: [swift-dev] State of Semantic ARC?

> On Jul 8, 2017, at 10:36 AM, Johannes Weiß via swift-dev > wrote: > > Hi swift-dev, > > I haven't heard anything about semantic ARC and couldn't really find much > documentation besides > https://gottesmm.github.io/proposals/high-level-arc-memory-operations.html . >

[PATCH] D34529: [Driver] Check that the iOS deployment target is iOS 10 or earlier if the target is 32-bit

bob.wilson accepted this revision. bob.wilson added a comment. This revision is now accepted and ready to land. LGTM https://reviews.llvm.org/D34529 ___ cfe-commits mailing list cfe-commits@lists.llvm.org

[PATCH] D34529: [Driver] Check that the iOS deployment target is iOS 10 or earlier if the target is 32-bit

bob.wilson added inline comments. Comment at: lib/Driver/ToolChains/Darwin.cpp:1350 +Minor = 99; + } } else if (Platform == TvOS) { What about Micro = 99? https://reviews.llvm.org/D34529 ___

[PATCH] D34529: [Driver] Check that the iOS deployment target is iOS 10 or earlier if the target is 32-bit

bob.wilson added a comment. The proposed error message does not provide any information about why the version is invalid. That could be confusing. Your comment in the code is more clear: "iOS 10 is the maximum deployment target for 32-bit targets". Can you say something like that in the error

Re: [Elecraft] KX2 and Omnirig ...

According to the Elecraft Programmer's Reference , "The KX3 and KX2 accept all K3 commands, though some have no functional effect on the KX3/KX2 (*)". So, in OmniRig, select radio type Elecraft K3, and everything supported by OmniRig

Re: [Elecraft] Using Heil Pro Set Elite boom mic on K3.. what adapter is required?

Yes. Remove all Heil adapters. Connect Pro Set directly to rear panel 1/8" MIC and PHONES jacks. Tap MENU. Rotate VFO B knob until you see MAIN:MIC SEL. Use MAIN:MIC SEL to select rP (rear panel) mic. by rotating VFO A knob. Tap 1 to select Lo or Hi mic gain, whichever works best. Tap 2 to

Re: [Elecraft] More precise signal strength

See "VFO B Alternate Displays", page 36 of the current K3 Owner's Manual. To summarize, Set CONFIG:TECH MD ON Tap DISP to see something other than VFO B freq Rotate VFO B to see AFV, which displays the AF output as a voltage reading, independent of AF gain. When it stabilizes, rotate VFO B to see

Re: [Elecraft] Seeking input on KPA1500 station configurations

Wayne, Sorry for the delayed response. What seems to be missing from the KPA1500, compared to the Alpha 87A, is a keying OUTPUT on an RCA phono jack. If it's too late to add another jack to the KPA1500, perhaps the REM jack could be reprogrammed via firmware to do this function, instead of

[Elecraft] [K3] "The Y-BOX" is now back in stock in limited quantities

(The Y-BOX is a 4-way Accessory Port Splitter and Breakout Box for the K3 -- see https://bit.ly/Y-BOX) Thanks everyone for all the orders and kind reviews (see https://www.eham.net/reviews/detail/13296). I've worked my way through the waiting list, and all outstanding Y-BOX orders have now been

Re: [swift-dev] swift.org nightlies are old

Update: we’re still working on this. We got some LLDB test failures resolved yesterday and are now looking at a SwiftPM failure. Hopefully that will be the last one…. > On May 9, 2017, at 1:19 AM, Karl Wagner wrote: > > Great, thanks! > > >> On May 8, 2017 at 6:55 am,

Re: [swift-dev] swift.org nightlies are old

There was a problem with some test failures blocking the build. We should at least be able to xfail those tests to get things unblocked tomorrow. > On May 7, 2017, at 8:49 PM, Karl Wagner via swift-dev > wrote: > > It looks like the nightlies on swift.org haven’t been

Re: [swift-dev] Renaming SILSuccessor -> SILCFGEdge

> On Apr 26, 2017, at 3:11 PM, Michael Gottesman via swift-dev > wrote: > > >> On Apr 26, 2017, at 1:44 PM, John McCall wrote: >> >>> On Apr 26, 2017, at 4:24 PM, Michael Gottesman via swift-dev >>> wrote: >>> Hey everyone. >>>

[Elecraft] My photos of the KPA1500 from Visalia, and a Y-BOX update

If you'd like to see what a KPA1500 looks like next to a K-line, start here: https://bit.ly/KPA1500atVisalia and step through the next five photos by pressing the "right arrow" key on your keyboard, or clicking on the circled arrow that appears on the right side of the photo when you move the

Re: [Elecraft] Recording Line Out on the K3

You need K3 Beta firmware 5.58 or later. It has a new feature: TX LINE OUT (MONITOR) LEVEL NOW ADJUSTABLE: In CONFIG:LIN OUT menu entry, tap '2' (REV switch) to set the "T=" level (TX monitor). Tap '2' again to return to the RX LINE OUT setting. 73, Bob, N6TV On Tue, Apr 18, 2017 at 11:20

Re: [swift-dev] [Swift CI] Build Failure: 0. OSS - Swift Incremental RA - Ubuntu 14.04 - Long Test (master) #2126

Wrong group. Sorry, you’ll have to live without these awesome features for now. > On Apr 14, 2017, at 9:49 PM, Bob Wilson via swift-dev <swift-dev@swift.org> > wrote: > > The hope is that the “SkyNet” project that Marc Shifer’s team is developing > will be able to

Re: [swift-dev] [Swift CI] Build Failure: 0. OSS - Swift Incremental RA - Ubuntu 14.04 - Long Test (master) #2126

The hope is that the “SkyNet” project that Marc Shifer’s team is developing will be able to help with things like that. The “emoji hashes” in our new Jenkins 2 bots are the first step in that direction…. > On Apr 14, 2017, at 9:08 PM, Andrew Trick wrote: > > >

Re: [Elecraft] K3S SSB TX monitor - feature request

On Fri, Apr 7, 2017 at 1:03 AM, Richard Lamont wrote: > I'm just trying to keep the TX mon audio (from the mic) in the > headphones and out of the speakers, without having to use macros or > fiddling with controls. (All my macro buttons are used up, and if I > forgot to

Re: [Elecraft] K3S SSB TX monitor

On Thu, Apr 6, 2017 at 1:53 PM, Richard Lamont wrote: > When I'm using a voice mode with a microphone, I need the TX monitor > audio to appear in the headphones and NOT the speakers. > > I need this to happen automatically, every time I plug in or unplug the > headphones,

Re: [Elecraft] Sub Receiver Questions

On Mar 27, 2017 7:22 PM, "wa9fvp" wrote: While receiving on 20 meters, for example, on the main Receiver, can I receive another band using the Sub-Receiver connected to the Receiver In port? If CONFIG:VFO IND is set to YES, use the AUX port for the SubRx antenna instead

[Elecraft] [K3] Initial batch of Y-BOXs now sold out - waiting list available

Hello again, Thanks folks for all the orders of the Y-BOX accessory for the K3 and K3S -- I really appreciate the response and the kind words. Most who've ordered should have received a USPS tracking number already, and your Y-BOX should arrive soon. Feel free to post your impressions and

Re: [Elecraft] K3 microphone input selection

Alan, Do you have MAIN:MIC+LIN set to ON? If so, try setting it to OFF. 73, Bob, N6TV On Mar 15, 2017 3:41 PM, "Alan. G4GNX" wrote: I will do that Bill. I'm sure it's was never intended to work that way. I can't think of any reason it should, so it's either a bug

[Elecraft] [K3] Announcing "The Y-BOX", a new 4-way splitter and breakout box for the K3 and K3S

WA6HHQ encouraged me to post this here. Wanting to replace the tangled chain of multiple Y-Adapters connected to my K3 ACC port with something cleaner and more reliable, I designed a new custom circuit board to fit into a commercial VGA switch box case. The result is a new combination 4-way

Re: [Elecraft] VOX/PTT select macro ?

Yes, I see now that VOX mode is remembered on CW, and separately on AFSK, SSB, AM, FM etc. The best alternative for now (short of Wayne adding VXn SET commands), is to avoid VOX mode except on CW. Configure digital software to generate PTT, and use a foot switch on phone. Most digital programs

Re: [Elecraft] VOX/PTT select macro ?

On Sat, Mar 11, 2017 at 2:25 PM, David Box wrote: > Issue is that there is no conditional statement in the macro language so > being able to read the vox state does not help with macros. > Yes, some things like unconditionally turning VOX ON or OFF are impossible to do in

Re: [Elecraft] VOX/PTT select macro ?

The VX; command (GET only) will return the current state (VOX ON or OFF = PTT). *Note:* there is an error in the documentation in the K3 Programmer's Reference , which says: "RSP format: VXn; where n is 0 (VOX on) or 1 (VOX off)."

Re: [Elecraft] K3S with more than one device on the Band Data signals

Using band data mode, I've simultaneously driven both the KPA500 and a Top Ten Devices band decoder from a single K3 with no problems. 73, Bob, N6TV On Fri, Mar 10, 2017 at 2:38 PM, NOEL POULIN wrote: > Hi to all, > I am on the way to connect a Bandpasser2 (band data

Re: [Elecraft] K3 Stops Transmitting

Correction to Item 2. I meant to write "A floating *PIN 7* (TX INH) can cause TX to be intermittently inhibited..." 73, Bob, N6TV On Thu, Mar 9, 2017 at 6:50 PM, Bob Wilson, N6TV <n...@arrl.net> wrote: > No TX power is a common problem, especially on DXpeditions. Other

Re: [Elecraft] K3 Stops Transmitting

No TX power is a common problem, especially on DXpeditions. Other than power supply issues, it is usually one of three things: 1. Intending to use the BAND button, one holds down the right MODE button by mistake, putting the K3 into TX TEST mode. The "TX" icon flashes. But, since you

Re: [Elecraft] Lost Cursors

Are you in Fixed mode or Tracking mode? Do you mean VFO Cursors or Markers? Do you see a little purple triangle at the edge of the screen indicating that the VFO B cursor is off the Edge of the screen? Be sure to set MENU:FixMode to something other than Static. I also recommend MENU:FixTrack

Re: [Elecraft] KPAK3AUX cable

I've tested many "VGA extension" cables that do not have all 15 pins wired, or short several pins together as a common ground. They work fine for VGA monitors, but should never be connected to any Elecraft product except the P3SVGA external monitor port. Many VGA cables include connectors

Re: [Elecraft] fw upgrade

Did you ever try clicking "Copy New Files from Elecraft"? 73, Bob, N6TV On Fri, Mar 3, 2017 at 5:05 PM, Dick Frey wrote: > ready to install KSYN3A. trying to upgrade MCU as instructed with K3 > utility v 1.16.7.25. > Present MCU is v 4.83. > Clicking Check for revisions

Re: [Elecraft] K-Pod: A failure to Communicate

On Wed, Mar 1, 2017 at 5:29 AM, Wes Stewart wrote: > Just for completeness, since the K-Pod utility was on the same computer, I > decided to reload the firmware. I restarted the K3 utility and for giggles > placed a space in front of the M1 command string. It functioned

Re: [Elecraft] list submission, using ham radio deluxe and logic with k3 and a laptop with only com3

Maybe try OmniRig by VE3NEA ? It allows all supported programs to share the serial port of the K3 at the same time. Both Ham Radio Deluxe Bridge and Logic 9 are listed as compatible. But, perhaps it doesn't work with the latest version of HRD?

Re: [Elecraft] K-Pod: A failure to Communicate

Have you tried programming the identical function into both the TAP and HOLD macros for each button? It's very easy to hold down a K-POD button a bit too long, which runs a different macro. If nothing is programmed for the HOLD function, you'll see "MACRO 1" or similar blink in the VFO B

Re: [Elecraft] New build K3S no speaker audio, low mic gain

Chuck, Looks like your reply didn't go to the list, so I'm quoting it below for the benefit of other readers. It looks like KG6IRW has the solution. From the Owner's Manual Errata: "IF THE SPEAKER IS NOT WORKING with headphones unplugged: Locate the CONFIG:SPKR+PH menu entry. Tap ‘1’ on the

Re: [Elecraft] New build K3S no speaker audio, low mic gain

Which speaker doesn't work, the internal speaker or an external one plugged into the SPKRS jack on the back? If internal, did you remember to connect the 2-pin cable to the header before putting the top cover on? If external, did you use a stereo plug or a mono plug? If mono, did you set

Re: [Elecraft] Recording Line Out on the K3

The problem of no TX Monitor audio on LINE OUT was fixed last July, in MCU firmware 5.51, DSP 2.88. What version of firmware is your K3 running? 73, Bob, N6TV On Feb 25, 2017 7:50 PM, "Dave Fugleberg" wrote: I have Line Out of the K3 connected to Line In on one of my

Re: [Elecraft] K3 Receiver mush

On Fri, Feb 24, 2017 at 10:54 AM, Jim Brown <j...@audiosystemsgroup.com> wrote: > On Thu,2/23/2017 6:32 PM, Bob Wilson, N6TV wrote: > >> For reference, here are my preferred AGC and other settings for >> contesting with a K3 and large CW pileups. >> > > Bob'

Re: [Elecraft] K3 Receiver mush

w0mu wrote > What happens when you turn the AGC off and ride the rf gain? Do these > setting still have some effect or should they be set up differently?I > assume when you use 12/8/soft most people are using AGC-F? Ken, When you experienced the mush, did you have the AGC ON, but the RF Gain set

Re: [Elecraft] Feature Request: improved internal keyer and CW PTT behavior

donovanf wrote > Hi Richard, The K3 and external K1EL Winkeyer is a great combination, it > corrects most of the deficiencies of the internal K3 keyer and PTT VOX > delay. Hopefully the next next upgrade of the K3 internal keyer will at > least make it better, if not perfect! The biggest faults

Re: [swift-dev] proposed change for master-next merges

My only strong feeling here is that I think we need documentation of this > process in ./docs in addition to this proposal. > > Michael > >> >> On Wed, Dec 7, 2016 at 7:30 PM Bob Wilson via swift-dev <swift-dev@swift.org >> <mailto:swift-dev@swift.org>

Re: [swift-dev] [Swift CI] Build Failure: 0. OSS - LLDB Incremental - OS X (swift 3.1) #187

use gated merges from LLVM swift-*-branch to stable > On Jan 31, 2017, at 1:20 PM, Frédéric Riss wrote: > > >> On Jan 31, 2017, at 1:17 PM, Michael Ilseman > > wrote: >> >> Thanks, could you file a radar with the details? > >

[swift-dev] problem with compiler_crashers/28616-swift-parser-parseexprsequence-swift-diag-bool-bool.swift

As part of the move to reset the Clang/LLVM stable branches to their new versions, I disabled the compiler_crashers/28616-swift-parser-parseexprsequence-swift-diag-bool-bool.swift test because it was consistently failing to crash when I ran the tests locally. (It is expected to crash, so the

Re: [swift-dev] updating Clang/LLVM stable branches

> On Jan 17, 2017, at 1:41 PM, Bob Wilson via swift-dev <swift-dev@swift.org> > wrote: > > As I mentioned yesterday, once the last swift-3.1 merge is done, we are > planning to update the stable branches for Clang/LLVM to use the new > swift-4.0 branches that are

[swift-dev] updating Clang/LLVM stable branches

As I mentioned yesterday, once the last swift-3.1 merge is done, we are planning to update the stable branches for Clang/LLVM to use the new swift-4.0 branches that are aligned with LLVM 4.0. I was expecting we would do that today, but we’re going to wait until tomorrow (Wednesday) morning

Re: [swift-dev] Final merge from master to swift-3.1-branch

> On Jan 13, 2017, at 6:49 AM, Nicole Jacque via swift-dev > wrote: > > Hello Swift Developers- > > As outlined in Ted’s Swift 3.1 Release Process blog post, for the past month, > we’ve been periodically merging master to the swift-3.1-branch branch. We > will be doing

Re: [swift-dev] [Swift CI] Build Failure: 0. OSS - Swift Incremental RA - OS X (master) #7501

Yes, he renamed sil-extract to sil-func-extractor (https://github.com/apple/swift/pull/6155/files ) and missed updating some places. This should fix it: https://github.com/apple/swift/pull/6159 (FWIW, I

[swift-dev] proposed change for master-next merges

I would like to make a change in the way we handle the master-next branch. Summary: I’d like to switch to a model where we continuously test against the latest upstream LLVM changes. The goal is to simplify the process and make it easier to collaborate on maintaining master-next. Background:

RE: [DOG mailing list] Hangar dolly?

mailing list] Hangar dolly? Bob, Could you please send some photos? Thanks, Greg. Greg Wilson On Wed, 09 Nov 2016 22:52:34 +1100 Bob Wilson<expr...@pnc.com.au <mailto:expr...@pnc.com.au> > wrote Ian, We have such dollies and a neat system for our Taifu

RE: [DOG mailing list] Hangar dolly?

you please send some photos? Thanks, Greg. Greg Wilson On Wed, 09 Nov 2016 22:52:34 +1100 Bob Wilson<expr...@pnc.com.au <mailto:expr...@pnc.com.au> > wrote Ian, We have such dollies and a neat system for our Taifun. (one type of lifting system) Three doll

r285428 - Add missing newline at EOF to avoid -Wnewline-eof warnings.

Author: bwilson Date: Fri Oct 28 13:55:50 2016 New Revision: 285428 URL: http://llvm.org/viewvc/llvm-project?rev=285428=rev Log: Add missing newline at EOF to avoid -Wnewline-eof warnings. Modified: cfe/trunk/include/clang/Basic/OpenCLImageTypes.def Modified:

<    1   2   3   4   5   6   7   8   9   >