Then your decision might be bolstered by this one.
---
Steve Wilson
HOBI International, Inc. http://www.hobi.com
7601 Ambassador Row, Suite 101
Dallas, TX 75247
desk 214-951-0143, fax 214-951-0144
[EMAIL PROTECTED]
Ian P. Christian wrote:
On Wednesday 17
a = 0 at time3
in always a = 0 at time4
in always a = 0 at time5
--
Steve Wilson
Hardware Architect
GDA Technologies
(408) 467-3595
On Mon, 2005-01-03 at 11:13 -0500, Olson, Dana wrote:
I have this Aastra 480i phone, and you can set the TFTP server IP
address manually in the phone, but there should be a way to have it
find the TFTP server information via DHCP. Does anyone know if this is
possible, and if so, what is the
-Caveat Lector-
Im real sick if of reading about young men from the U.S. military being killed every day and seeing all those young men with there legs and arms removed, Im sick of human rights violations alleged by Guantanmo prisoners, I also know torture is a reality
hello,
I'm beginning to work in the wet plate process and am seeking information as to lenses of the day, specifically darlots. any advice? many thanks.
steve
Your DNS is got a good hold. I clicked on the link and it worked..
Steve Wilson
Svenn Are Bjerkem wrote:
Hi,
get no contact with geda or ftp.seul.org. Is this worldwide or is my DNS
pulling my leg?
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Steve
Wilson
Sent: November 6, 2003 11:51 AM
To: [EMAIL PROTECTED]
Subject: [otrs] CustomQueue
Hello All,
Is there anyway you can have more that one queue defined as a CustomQueue,
or if not is there a way to have
. If that's not what you're talking about, could you be a little more
specific so that I can actually start helping you instead of confusing you?
:-)
Hope this helps!
--
Chris Salter
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Steve
Wilson
Sent: November 6
driver, but cannot find
any mention of it for freebsd, quite a bit for linux which suggests it
is supported.
Anybody know, or got it working already?
Thanks
Steve Wilson
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd
-Caveat Lector-
I live in Chicago.I think that maybe brain implants and recording devices should be placed the politicans so they can get an understanding of what is like to a victim of electronic mind control, then if they find being tortured 24 hours a day via biological telemetry does not agree
for the general
public company to use on their devices. If you require an upgrade for any
other purpose it must be done through the proper channels using an
authorised reseller.
Steve Wilson
Network Engineer
-Original Message-
From: Wilmes, Rusty [mailto:[EMAIL PROTECTED]
Sent: 11 August 2003 13:57
! Makes the design portable beyond ASICS. As for sentiments like
my design is always going to be in ASICS - I've been makeing a living
lately porting FPGA designs to ASICS ;-) You just never know.
That's my 2 cents worth.
Steve Wilson
If I could find a not too intrusive way to tell Icarus
recommend NetBIOS over TCP/IP in the advanced settings. If you can ping the
devices on the LAN, then you will require NetBIOS to browse properly. This
is a simple solution to a possibly complicated scenario, but try it out
anyway.
Regards,
Steve Wilson CCNP
Network Engineer
-Original Message
too.
Regards
Steve Wilson
Senior Systems Administrator
Legend Internet Ltd.
===
Archive at http://www.open.com.au/archives/radiator/
Announcements on [EMAIL PROTECTED]
To unsubscribe, email '[EMAIL PROTECTED]' with
'unsubscribe radiator' in the body of the message.
Being that I haven't looked at Spice, etc. since my college days which
was better than 25 years ago...
Can some kind soul explain to me the basic functional differences
between gnucap and say - tclspice?
Thanks,
Steve Wilson
Stuart Brorson wrote:
Hello,
As some of you know, the official
-Original Message-
From: Allan Foster [mailto:[EMAIL PROTECTED]
I have found EFS to be effective only as long as the encrypted
file is on a Windows 2000/XP machine. As soon as you copy it to
a computer with a different operating system, the file is decrypted.
Allan Foster, CISA,
I had that same Pod2man problem on a stock RH9 system a couple of weeks ago.
The (much appreciated) advice I got was to:
Download the tarball.
Unpack it - (tar -xzvf filename)
change to the dir it unpacked in, and instead of running perl
Makefile.PL , run
LANG=C perl Makefile.PL
Worked like a
Try taking the access-lists off the interfaces and try again. The access
control list acting on the interfaces means that every single packet going
through the interface is inspected.
Steve Wilson
Network Engineer
-Original Message-
From: Ismail Al-Shelh [mailto:[EMAIL PROTECTED
job as well as
I can and hope that if I am made redundant again I have the right
combination of qualifications and experience to get another job.
Can we please now all get off our high horses, get drunk and forget the
whole argument?
Cheers,
Steve Wilson CCNP CCDA
Network Engineer
-Original
I've been running *nix boxes for a while, but I've gotten WAY too
comfortable with GUI-point and click type stuff. Most of what I've been
running have been RH boxes, and I always tried to find RPMs. From
xWindoze or rpm -i -- it's all kind of mindless. (I SAID I'd gotten way
too comfortable
require passing both CCDA and the design exam, not just the design alone.
Steve Wilson CCNP CCDA
Network Engineer
-Original Message-
From: Mike Momb [mailto:[EMAIL PROTECTED]
Sent: 09 June 2003 14:12
To: [EMAIL PROTECTED]
Subject: CCNA certification [7:70400]
To All,
I have a friend who
Atlas wrote:
I can't find the information how to manually run qmail-inject. It
looks, that it reads info from stdin, but my mail was not delivered :((
When I find it, I will publish it in this mailing list - surely
Maca
Don't know if this answers you or not, but (page 23 of Life With Qmail)
Stuart Gall wrote:
Where did you get that idea ?
spamc respects the user_prefs and local.cf files.
The only issue might be if you want user based configuration and you are running spamc
as mail or something
but this should be configureable on the MTA.
Oh. The docs (which I don't have in front
Yes you are going mad, welcome to the club.
Steve Wilson CCNP CCDA
Network Engineer
-Original Message-
From: Lauren Child [mailto:[EMAIL PROTECTED]
Sent: 04 June 2003 15:07
To: [EMAIL PROTECTED]
Subject: IOS Licensing [7:70133]
Hiya
Im a tad confused here and would appreciate some
Check your network lists on the concentrator. They need to as explicit as
possible. If you supernet any contiguous networks, ensure that you do not
accidentally include a network that is really down another tunnel.
Cheers,
Steve Wilson CCNP CCDA
Network Engineer
-Original Message-
From
[EMAIL PROTECTED] wrote:
I'm setting up a new box with qmail, qmail-scanner and spamassassin on a Red
Hat box. Does anyone have recommendations about which OS version I should use?
I just set up a new box using RH9 and QMAIL. Haven't figured out QMAIL
Scanner yet, but I will.
The rest works
Jack Gostl wrote:
My /home/$user/.procmail/rules.rc file is:
:0fw
| /usr/bin/spamc
:0:
* ^X-Spam-Status: Yes
SPAM
---
That now works only if I change line2 to /usr/bin/spamassassin.
This isn't a terribly big system here, so I suppose I could get away
with that, but I'd much prefer to
Jack Gostl wrote:
On Sat, 31 May 2003, Steve Wilson wrote:
My /home/$user/.procmail/rules.rc file is:
:0fw
| /usr/bin/spamc
:0:
* ^X-Spam-Status: Yes
SPAM
---
That now works only if I change line2 to /usr/bin/spamassassin.
This isn't a terribly big system here, so I suppose I could get
The usual apologies about this being a newbie question and all that are
proffered..
I've got spamd/spamc working fine on a RH9 Linux box with sendmail. I
have it being called by procmail, and it works fine.
I need to have a new email server, so I built a new RH8 machine and
installed
Jack Gostl wrote:
Someone posted a message here saying that SA really kicks ass. I know it
is an international community on this list, so let's make sure we all
understand it was a compliment. It was also an understatement.
Amidst all the questions in here, I wouldn't want the developers to lose
of
this type.
Steve Wilson
Network Engineer
-Original Message-
From: James Gosnold [mailto:[EMAIL PROTECTED]
Sent: 04 April 2003 09:22
To: [EMAIL PROTECTED]
Subject: RE: Debug display to VTY [7:66762]
Hi, this seemed to do the trick, thanks.
Just found it confusing as having gone through
PC and direct internet access. If we told you
everything there would be no challenge. Good luck
Cheers,
Steve Wilson
Network Engineer
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: 04 April 2003 14:23
To: [EMAIL PROTECTED]
Subject: RE: allowing telnet
Type in ping, press return and follow the on screen prompts. This will allow
you to use ping in extended mode to specify the source address or interface.
Steve Wilson
Network Engineer
-Original Message-
From: Peter P [mailto:[EMAIL PROTECTED]
Sent: 26 March 2003 11:16
To: [EMAIL
The safest way I have come across is to create a vpngroup with a single IP
pool address and then allow telnet from that address only. You will need a
vpn client of course. the sample config is available on CCO, or contact me
offline for my version.
Steve
-Original Message-
From: Ismail
Last time I looked you could not do NAT-T on a PIX with 6.3 software. Only
VPN Gateways can handle it. Next gen of software should be able to do it sez
the great god Cisco. I have been looking forward to this for some time as I
install both PIX and VPN all the time.
Cheers,
Steve
-Original
If all the complicated answers fail try putting a timer switch on the socket
that the device is powered from.
Steve Wilson
Network Engineer
-Original Message-
From: milind tare [mailto:[EMAIL PROTECTED]
Sent: 26 March 2003 04:54
To: [EMAIL PROTECTED]
Subject: reload 3500XL switch [7
Type in ping, press return and follow the on screen prompts. This will allow
you to use ping in extended mode to specify the source address or interface.
Steve Wilson
Network Engineer
-Original Message-
From: Peter P [mailto:[EMAIL PROTECTED]
Sent: 26 March 2003 11:16
To: [EMAIL
Maybe I'm simple but RIP v1 is classfull last time I looked. Also check for
the command IP SUBNET-ZERO, it may come in handy.
Steve Wilson
Network Engineer
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: 26 March 2003 13:02
To: [EMAIL PROTECTED]
Subject
the PDM is a useful tool for a graphical view of the configuration. If you
are using your PIX to terminate VPN clients or tunnels you may stillned to
use the command line to administer and configure them. This might be
improved in the next release of the Operating System. Personally i agree
that
without seeing your router it may be that the ethernet port is e0/0
perchance. It may even be a fastethernet port. Check the physical make up of
the router.
Cheers,
Steve Wilson
-Original Message-
From: SMAN
To: [EMAIL PROTECTED]
Sent: 20/03/2003 15:33
Subject: Re: Open http: traffic
authentication pap callin
ppp pap sent-username CSTM password
!
ip nat inside source list 1 interface Dialer1 overload
no ip http server
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer1
!
access-list 1 permit 192.168.10.0 0.0.0.255
dialer-list 1 protocol ip permit
!
Cheers,
Steve Wilson
on the VPN
concentrator allowing the PIX to concentrate its processing power on the
primary task that it is for. Both devices provide security and fire-walling
to a certain degree, it's just horses for courses as to which does which bit
better.
Steve Wilson
Network Engineer
-Original Message
to
understand what the filename means.
Steve Wilson
Network Engineer
-Original Message-
From: John Tafasi [mailto:[EMAIL PROTECTED]
Sent: 05 March 2003 06:33
To: [EMAIL PROTECTED]
Subject: Catalyst 3550 SMI or EMI [7:64442]
How do I know if a catalyst 3550 is running EMI or SMI image. I tried
by a high speed link between the two big sized
distribution switches.
An example would be two catalyst 6500 type switches as a central
distribution fanning out to lots of access switches. The link between the
two 6500s could be a group of gigabit fibre links.
Steve Wilson
Network Engineer
that it is connecting to. the only way that I have managed to solve the
problem is by having completely specific network lists that ensure that
there is no dubiety in where packets can be routed to. if you are using
super-netting be careful.
Steve Wilson
Network Engineer
-Original Message
Systems, Inc. Console Fri Feb 28 2003, 02:25:04
Enter password:
cat4006
Have fun,
Steve Wilson
Network Engineer
-Original Message-
From: Eagles Fan [mailto:[EMAIL PROTECTED]
Sent: 27 February 2003 20:51
To: [EMAIL PROTECTED]
Subject: Re: Cat4006 - Prompt [7:63984]
I have tried
inside
telnet timeout 5
ssh timeout 5
terminal width 80
Cryptochecksum:57078d328d36e851c854b4913142d72e
: end
Best of luck,
Steve Wilson
Network Engineer
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: 27 February 2003 20:38
To: [EMAIL PROTECTED]
Subject: PIX VPN
device working at layer3 between subnets and a
chassis like a 6509 which can have individual blades perform the functions
without the limitation of wires between the physical interfaces. The wires
are still there, they are just created in software in the chassis.
Cheers,
Steve Wilson
Network Engineer
Ed,
Try clear logging. It depends on what you are trying to clear.
Steve Wilson
Network Engineer
-Original Message-
From: Edward Sohn [mailto:[EMAIL PROTECTED]
Sent: 26 February 2003 18:30
To: [EMAIL PROTECTED]
Subject: PIX question [7:63892]
does someone know what the equivalent
it clears away some of the
mud.
Cheers,
Steve Wilson
Network Engineer
-Original Message-
From: DeVoe, Charles (PKI) [mailto:[EMAIL PROTECTED]
Sent: 26 February 2003 12:45
To: [EMAIL PROTECTED]
Subject: RE: L3 Switching Huh [7:63728]
OK, let me try this again. I am trying to figure out
Ismail,
It does not look possible. Where are you getting the signalling, timing and
IP addresses from?
If you can build it on your test bench with just a pair of wires, best of
luck.
Steve Wilson
Network Engineer
-Original Message-
From: Ismail Al-Shelh [mailto:[EMAIL PROTECTED]
Sent
Check the device that is connected to the port for speed setting and duplex.
If possible fix it to one particular setting at both ends. Start low and
then build up to 100 full. The errors are usually caused by a mismatch or
cabling that cannot handle it.
Steve Wilson
Network Engineer
Hi,
As I'm new to this I'm not 100% sure what information you require so
I'll fire what I think is relevant.
I have the server running from a mandrake 9.0 machine, and the client is
a Sparc Station 5 with a type 5 keyboard
As this is the only client at the moment everything is configured as
Derek,
12.2(8)T4 has got bugs, CCO recommends upgrading to T5. When I built your
kit I could see both interfaces as being up when connected to a DTE device.
Cheers,
Steve Wilson
-Original Message-
From: DW [mailto:[EMAIL PROTECTED]]
Sent: 19 February 2003 16:43
To: [EMAIL PROTECTED
-Caveat Lector-
http://www.scafrica.com/news1.htm
South African blacks are killing whites in droves, but the mainstream media chooses to cover up this horror.
Those who seek no further than the popular media for their information will he under the impression that now that the hated apartheid
-Caveat Lector-
http://www.angelfire.com/nj3/soundweapon/
A HREF=""www.ctrl.org/A
DECLARATION DISCLAIMER
==
CTRL is a discussion informational exchange list. Proselytizing propagandic
screeds are unwelcomed. Substancenot soap-boxingplease! These are
sordid matters and 'conspiracy
-Caveat Lector-
Section 802 of the first Patriot Act. (Section
802 is the new definition of domestic terrorism, and the definition is
âany action that endangers human life that is a violation of any Federal
or State law.â)
http://www.angelfire.com/nj3/soundweapon/
the guys doing the above
-Caveat Lector-
In a message dated 1/26/03 7:42:13 PM Pacific Standard Time, [EMAIL PROTECTED] writes:
Powell claims Saddam has 'clear ties' to al-Qaeda and Bin-Laden
this is probably true just like there were ties between Japan and Germany in WW2,
so then Isreal would be a sort of ally. Now
-Caveat Lector-
In a message dated 1/15/03 8:56:56 AM Pacific Standard Time, [EMAIL PROTECTED] writes:
When I was a kid we would just slap Henny Penny on
a stump and whack her head off with a hatchet.
I Steve Wilson am a vegetarian.
I am a victim of human rights abuses involving electronic
timeout. The user receives an Access-Accept with the
reply message and attributes clearly showing that this user should not
have connected. Where are we going wrong with the changing of the return
code ?
--
Steve Wilson [EMAIL PROTECTED]
#!/usr/bin/perl
#host isdn0.radius.legend.net.uk:3306
, Steve Wilson
wrote:
The attached is our postauthhook file which we use to see if the user
has exceeded their quota of usage, this is calculated on a rolling 30
days. The problem we have is that when a user has used 150% or more we
are trying to send a reject, and due to safety
We are putting together a radius server which authenticates from
openldap, accounts and holds sessions in mysql, and does the dynamic
pooling.
All was working fine before I added the dynaddress stuff and now
radiator crashes :(
Running in debug mode logfile gives:
Fri Nov 22 12:39:46 2002:
locate LDAPapi.pm in ...
In addition the machine has got the perl and ldap development rpms
installed and my AuthBy RADIUS section does work fine, unfortunately I
_need_ to authenticate using ldap.
tia
Steve Wilson.
===
Archive at http://www.open.com.au/archives/radiator/
Announcements on [EMAIL
After installing Convert::ASN1 it worked a dream. Now I'm kicking myself for
battling to build that module to get LDAP working instead of LDAP2.
Thanks for the help
Steve Wilson
Hugh Irvine writes:
Hello Steve -
I suggest you use the AuthBy LDAP2 clause with the perl-ldap module.
See
numbers.
Just a suggestion.
Thanks for the opportunity to test out such a great tool, and keep up the
good work.
By the Grace of God,
Steve Wilson
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Troy A. Griffitts
Sent: Saturday, May 25, 2002 10:34 AM
Accession Number :
AD0702525
Citation Status:
Active
Citation Classification:
Unclassified
Field(s) Group(s):
060400 - ANATOMY AND PHYSIOLOGY
Corporate Author:
YALE UNIV NEW HAVEN CONN SCHOOL OF MEDICINE
Unclassified Title:
MULTI-CHANNEL TRANSDERMAL STIMULATION OF THE BRAIN.
Title
Accession Number :
AD0696102
Citation Status:
Active
Citation Classification:
Unclassified
Field(s) Group(s):
050800 - PSYCHOLOGY
230100 - BIOMEDICAL INSTRUMENTATION AND BIOENGINEERING
Corporate Author:
YALE UNIV NEW HAVEN CONN SCHOOL OF MEDICINE
Unclassified Title:
UHF STIMULATION
Accession Number :
AD0684154
Citation Status:
Active
Citation Classification:
Unclassified
SBI Site Holding Symbol:
ASM
Field(s) Group(s):
060400 - ANATOMY AND PHYSIOLOGY
Corporate Author:
YALE UNIV NEW HAVEN CONN DEPT OF PSYCHIATRY
Unclassified Title:
IMPLANTATION OF MULTILEAD
-Caveat Lector-
Hitler gassed homosexuals.
Homosexuals under Hilter's Germany (the all purpose focus fall guy scpaegoat
never mentioning the ruthless scum Dr.Mengle who most people dont know about)
did not represent a politcial constiuency that politicians would seek to
appease.
In the US there
-Caveat Lector-
Just take your soma and be a good little Epsilon
then be a senior citizen who has to decide between taking thier meidcation$
perscription or food.
Ill remain a Christian Scientist thankyou no perscriptions no new hospital
infections
No costly surgureys last time they put
-Caveat Lector-
Just in time for the Democrats to take power. Dirt about Busch.
Under the Clinton administration people began to come forth about involuntary
human experimentation. Clinton didn't do much about it at all.
Maybe he funded it or allowed it to be funded.
He was to busy going to
There is no 'rawcom' directory that I see. There is a 'raw' directory. This
may very well be the problem, of course I guessing here.
Steve Wilson
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Chris Little
Sent: Thursday, January 17, 2002 9:58 PM
To: [EMAIL
I continue to be amazed at the detail of pinhole images. This image was
taken at taken a local marina.
www.???/discussion/upload/gallery2002.php?pic=pinholetug.
jpg
***
Steve Wilson
Bainbridge Island, WA
Email: steve.wil...@eyeconcur.com
exchange in the right-hand upper quadrant of the image.
http://www.???/discussion/upload/gallery2002.php?pic=offi
cesurf.jpg
Thanks again to all of you who shared your images. I show them to
everyone who comes to my home!
-Steve
***
Steve Wilson
Bainbridge
wouldn't want that in the tank during the
exposure. But it would be really simple from there. Samigon makes one
that is only $12.95 from BH Photo. Maybe cheaper if you bought them in
quantity. ...just an idea.
***
Steve Wilson
Email: steve.wil...@eyeconcur.com
further assistance.
***
Steve Wilson
Bainbridge Island, WA
Email: steve.wil...@eyeconcur.com
-Original Message-
From: pinhole-discussion-admin@p at ???
[mailto:pinhole-discussion-admin@p at ???] On Behalf Of John Ptak
Sent: Saturday, January 05, 2002
Pinholing!
***
Steve Wilson
Email: steve.wil...@eyeconcur.com
-Original Message-
From: pinhole-discussion-admin@p at ???
[mailto:pinhole-discussion-admin@p at ???] On Behalf Of Matt Palmer
Sent: Thursday, January 03, 2002 12:51 PM
To: Pinhole
as I can tell it is the
only one that loses the first verse in the following chapters. You may be aware
of this, but if not I can supply you with the versions that differ if you need
them.
Thanks,
Steve Wilson
: [pinhole-discussion] Calculating accumulated flash for my
pinhole camera...
- Original Message -
From: Steve Wilson steve.wil...@eyeconcur.com
If my camera's pinhole f-stop is F197 and my metered strobe reading
for the scene is F22 (assuming correct meter reading for film ASA), I
I would like to experiment with different lighting scenarios with my 4X5
pinhole camera. Specifically, I would like to use a studio strobe to
paint my subject. Am I calculating this correctly?
If my camera's pinhole f-stop is F197 and my metered strobe reading for
the scene is F22 (assuming
When running exmlm-make by hand any knowing qmail administrator will replace
the . with : in the command line, mailinglist.c (I think) doesn't do the
replace and so creates .qmail-list.name as .qmail-list.name where we all
know it should be : instead. I'd fix it myself only I don't know C yet and
The problem removing the US civilian from the casualty of war
equation. With severe attacks against US civilians it might
be wise to adopt a new policy in the middle East.
Israel and the PLO are at war. I suggest moving Israel to the
United States. Thus Jews could worship as they want without
Now imagine modern reality:
1966 Anew born named Steve Wilson gets electrodes AKA Jose Delgado style
implanted in his brain as a new born, through out his life and especially
after 1984
he gets subject to non-ionizing electromagnetic radiation effects, via
directed energy experiments as in RADAR
where you assign clkr=0. No guarantee on how it will execute
(or not..). XL will nominally evaluate the top to bottom within a file
for initial blocks - while Icarus starts at the bottom. That alone will
explain why the difference.
Steve Wilson
http://members.tripod.com/~mdars/usafcyb4.htm
The only way you would have more than 1 instance of qmail-send is if you had
more than one queue, ie a multiqueueing environment .. 1 queue for
receiving, 1 for preprocessing and 1 for sending..
Steve
-Original Message-
From: Daniel BODEA [mailto:[EMAIL PROTECTED]]
Sent: 18 July
How about human rights? How about fair wages for everyone and not exploiting
a person because hes an illegal facing shit jobs no one else wants obviously
leaving conditions even worse how about treating people equally?
...Especially hungry and poor children?
I like a scientific skeptic at one time I didnt believe it till I saw it,
then Ifound out about one aspect, Greys are probably cloned cybernetic
monkeys.look at my web pages and you'll under stand. Now If your
interested in contacting some one who is living proof of SYNTEL and implants
don't understand is pic.v, it is
swapping the first two reports. Anyone care to debug that??
Steve Wilson
[EMAIL PROTECTED] wrote:
On Sat, 30 Jun 2001, Stephen Williams wrote:
[EMAIL PROTECTED] said:
Tests passed: 256, failed: 46, Unhandled: 34 Unable: 28, Assert: 0
Parse Errs: 3
Use Tridia's VNC. It has a registry setting to hide the taskbar icon and
other useful features.
Steve Wilson
PC Coordinator
Public Storage Inc.
[EMAIL PROTECTED]
-Original Message-
From: Bruno Banchi [mailto:[EMAIL PROTECTED]]
Sent: Friday, June 29, 2001 12:06 AM
To: [EMAIL PROTECTED
is a well-known
consultant
and speaker. The newsletter is geared for anyone with a job or anyone who
knows anyone with a job.
To subscribe, send a blank email to
[EMAIL PROTECTED]
Steve Wilson
Editor
Filling the Glass Newsletter
Eternal youth
you clone your body
and transplant your brain or head into disgard the old
then there also the implants.
Have some Respect Im aRepublican but cmon theres enough nasty stuff going on.
Shes good looking and educated.
Lets have some Respect for the first family.Im a Republican. What about
mindcontrol and implants and UFOs?
to many fags
Bush is not ther anti-christ hes the hope for a frre country
A bunch of bullshit
-Caveat Lector-
A HREF="http://www.ctrl.org/"www.ctrl.org/A
DECLARATION DISCLAIMER
==
CTRL is a discussion informational exchange list. Proselytizing propagandic
screeds are unwelcomed. Substancenot soap-boxingplease! These are
sordid matters and 'conspiracy theory'with its many
uh I dont remeber what I was going to write
What about Jessie Jackson Operation Push and his congressman son?
Icant get a penny for help fighting human rights abuses involving implants
and directed energy technology...im called a racist for being tortured
301 - 400 of 429 matches
Mail list logo