Hi guys,
I managed to get Fedora 30 AARCH64 installed on a RPI 3B+ and it mostly runs
great but I'm hitting a couple issues that I'm just not sure where to start
looking.
In order to make sure it's not the set of packages I'm installing, I brought up
a second RPI 3B+ that runs the official
This is kind of unusual. Raspberry Pi 3 B+ with Aarch64 image. My SSH
session keeps dying. I've noticed it happens about every half hour.
When I log into the physical machine I see the IP address has changed.
My DHCP server's default lease time is 60 minutes (max lease 120
minutes). 60 minutes is
F27 will not boot on the new Model 3+. Green LED blinks 4 times
(medium), then 4 times (fast), then repeats. The colored splash screen
is displayed.
Might this be just a device tree problem? Raspbian journal contains a line:
raspberrypi kernel: OF: fdt:Machine model: Raspberry Pi 3 Model B
Hi,
I would like to ask, is it any possibilities to use the GPIO headers from a
python program or from the userspace to control switches via the GPIO headers?
If not out of the box, but is there any possibilities, to write a device tree
overlay?
Thanks,
sgfdhsg
Hi Everyone,
I've been running a raspberry pi 3 with Fedora release 25 (Twenty
Five) using kernal 4.9.6-200.fc25.armv7hl, and I have been noticing for the
last 2 weeks that my Pi locks up. I tried hooking it up to an HDMI monitor,
and USB keyboard to see if the system generates any message,
Hi,
Current rawhide fedora image is using xfs has a bit higher memory
requirements than btrfs so I've started thinking about migration of my
current image to new root fs on new card.
Looking on partition table on rawhide image served by fedora I see:
Device Boot Start End
Built-in WiFi, Bluetooth, 64 bit processor. Is this finally the Raspberry
Pi that Fedora will run unmodified on? Sure hope so...
https://www.raspberrypi.org/blog/raspberry-pi-3-on-sale/
___
arm mailing list
arm@lists.fedoraproject.org
