Hi David,
For sure I will ask them but I think Asterisk should be able to handle this
case because it doesn't matter if it is adhearsion or something else. If it
is not present there is no way to get answer. So there must be some way to
go to another priority in the dialplan.
@Danny - this is
Hello,
I am about to start playing with wideband codecs in our lab, and was
hoping to get some clarification on a few things.
To date I've pretty much forced the use of G.711 on all legs of all
calls, and life has been grand. Now we are distributing phones with
G.722 and speex capability, and
Hi,
Asterisk 1.8.13 on Debian Testing (Wheezy), MTNL Mumbai.
Digium, Inc. Wildcard AEX410 4-port analog card (PCI-Express)
When Asterisk executes HangUp() on an incoming call, the line remains
connected for the caller.
Zone = in, opermode = INDIA. Line set to fxsks. Any help on where to
start
Hi,
Asterisk 1.8.13 on Debian Testing (Wheezy), MTNL Mumbai.
Digium, Inc. Wildcard AEX410 4-port analog card (PCI-Express)
When Asterisk executes HangUp() on an incoming call, the line remains
connected for the caller.
Zone = in, opermode = INDIA. Line set to fxsks. Any help on where to
start
In the cdr_custom.conf / cdr_sqlite3_custom.conf configuration files, is it
somehow possible to split the enumeration of CDR fields over multiple
lines? I get parsing errors when using more then a single line, but a
single line is very confusing if one has many CDR fields. So, is there
something
I have a couple asterisk boxes, running sip between both boxes. 1.4.43
on both.
both are installed from source,
both have default settings,
My config for one box is:
[devgeis]
type=friend
defaultname=devgeis
username=devgeis
secret=yes
disallow=all
allow=ulaw
allow=alaw
allow=gsm
rtptimeout=60
Hi all,
Been reading about chan_motif / chan_xmpp in the wiki's for 1.8, 10 and
11 version of asterisk.
In each example i got the impression that the asterisk server is
registering on a XMPP server as a single user with the credentials as
specified in jabber.conf.
Instead of a single xmpp-user,
On 7/08/2012, at 7:38 PM, Arstan Jusupov arst...@gmail.com wrote:
Correct me if I'm wrong but phono works with voxeo tropo.
Phono can also be used to make SIP calls directly to and from your Asterisk
servers via Voxeo.
I use it in my CRM package to provide a softphone that logs into call
Try adding qualify=yes
-Original Message-
From: asterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Jerry Geis
Sent: Tuesday, September 11, 2012 3:09 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject:
Raj,
I am just confirming it happens here as well.
CentOS 5.7. Asterisk 1.8.15.1. DAHDI 2.6.1.
Digium, Inc. Wildcard TDM410 4-port analog card (rev 11)
Loadzone = us
The problem started manifesting itself after I switched to 1.8.x from
1.6.2.x
Typical scenario: a caller apparently hangs up,
This has been happening since the asterisk 1.2 days, makes me believe it
has something to do with Analog FXO ckts provided.
Mitul Limbani
On Sep 12, 2012 10:18 AM, Vladimir Mikhelson v...@mikhelson.com wrote:
Raj,
I am just confirming it happens here as well.
CentOS 5.7. Asterisk 1.8.15.1.
Hans,
I did not try 10 or 11 as I run 1.8.15. Following are the related conf
files.
*gtalk.conf*
[General]
context = default
allowguest = yes ; Required if you want to accept calls from
people Not on your contact list.
bindaddr=private IP ;; These two settings are very critical
On Wednesday 12 Sep 2012, Vladimir Mikhelson wrote:
Raj,
I am just confirming it happens here as well.
CentOS 5.7. Asterisk 1.8.15.1. DAHDI 2.6.1.
Digium, Inc. Wildcard TDM410 4-port analog card (rev 11)
Loadzone = us
The problem started manifesting itself after I switched to 1.8.x
Raj,
Problem 1 is where asterisk times out and line gets free
However for problem 2
There is no way that this line frees up, as it depends upon remote side
infra of caller, if they calling from pri ckt they possibly could identify
our hangup signal, but if they calling from Analog exchange this
On 9/12/2012 12:05 AM, Raj Mathur (??? ?) wrote:
On Wednesday 12 Sep 2012, Vladimir Mikhelson wrote:
Raj,
I am just confirming it happens here as well.
CentOS 5.7. Asterisk 1.8.15.1. DAHDI 2.6.1.
Digium, Inc. Wildcard TDM410 4-port analog card (rev 11)
Loadzone = us
The problem
15 matches
Mail list logo