13 mar 2013 kl. 20:30 skrev Miguel Baptista miguel.bapti...@uninett.no:
Thank you Olle.
Well, in my test scenario I will leave the bindaddr=:: value.
Any idea if/when asterisk will support two specific bindaddr (one for IPv4
and another for IPv6) ?
I do hope that the new stack that will
Hi,
Attached is a sample CDR.
I need some help to understand the billsec column.
PS: the time value in billsec duration is same.
With reference to the attached log, what does the 10 sec / 6 sec / 2
sec correspond
to:
(a) Time between call connection to asterisk and disconnection from
If you have analog FXO ports then the call is considered answered as soon as
dialing is completed. This does not apply to SIP, PRI, or other technologies
which support far end answer detection.
-Original Message-
From: asterisk-users-boun...@lists.digium.com
hi,
billsec is time in seconds after call has answered, duration is total time
in seconds of call.
as your calls answered imidiatly your billsec and duration is almost same.
On Sun, Mar 17, 2013 at 5:14 PM, RSCL Mumbai rscl.mum...@gmail.com wrote:
Hi,
Attached is a sample CDR.
I need some
If you have analog FXO ports then the call is considered answered as soon
as dialing is completed not always true if FXO configured properly it
should not send back answered as soon as dialed.
On Sun, Mar 17, 2013 at 5:29 PM, Eric Wieling ewiel...@nyigc.com wrote:
If you have analog FXO ports
libss7-trunk cannot be used with any released version of Asterisk.
Thank you Richard.
I could install libss7-branche 1.0 successfully.
But i faced another problem. When i`m dialling over my SS7 enabled E1,
caller-id did not presentaded correctly on the destination phone.
I`m using these two
On 03/15/2013 09:21 AM, Pan B. Christensen wrote:
Hello!
We recently upgraded one of our customers from 1.4.44 to 1.8.15-cert1.
We have several other customers running both versions.
The customer in question does not use us as their provider as they’re
located in a different country.
I am using SIP.
I am still a bit confused about answered billed time.
For example:
00:00 -- Call Connected to asterisk
00:01 -- welcome greeting starts
00:11 -- welcome greeting ends (10 sec wav file)
00:12 -- Call enters queue and at the same time rings on first available
extension
00:15 --