On 23 July 2014 21:53, Robin Kipp mli...@robin-kipp.net wrote:
Hi all,
I’m currently in the process of familiarizing myself with Asterisk, and am
trying to move certain configuration objects (such as SIP peers) into a
MySQL database, accessed by Asterisk using the ODBC connector.
Now, I’ve
hello all,
i'm trying to do what in object with an asterisk box 11.11 on centos6.5,
using functions
AGC and VOLUME, but seems that does not work at all.
There is a way to check this values during setup/call?
Maybe is it not possible realize what i'd like to do?
Could anyone can help me on this?
Hi
To using VOLUME function the syntax is:
Set(VOLUME(rx)=+n)
Set(VOLUME(rx)=-n)
Set(VOLUME(tx)=+n)
Set(VOLUME(tx)=-n)
I think is not possible retrieve the value of the channel.
Att,
*Rafael dos Santos Saraiva*
http://br.linkedin.com/pub/rafael-saraiva/52/aab/230
2014-07-24 7:52 GMT-03:00
I am using centos 6.4 and 6.5
steps to install pjprojects is
a) git clone https://github.com/asterisk/pjproject pjproject
b) cd pjproject
c) ./configure --prefix=/usr --enable-shared --disable-sound
--disable-resample --disable-video --disable-opencore-amr
d) make dep
e) make install
f)
Whether SSD drives allow you to add any additional calls depends entirely
on whether or not they can be written to faster than the SAS drives you
have. My experience shows SSD's can be twice as fast as run-of-the-mill
SATA, but the performance difference compared to SAS is likely not as
great,
Thank you all for the answers. I will do tests to find the problem.
One other question I have, in the scenario that I sent, how bad would be to
transcode G711 to G729 in 70% of calls? There is a study that shows a
statistically loss of performance (concurrent calls) with active transcode?
tks
thanks a lot Rafael.
could you tell me also something about AGC(rx)=?
I mean, i've tryed
Set(AGC(rx)=)
Set(AGC(rx)=)
Set(DENOISE(tx)=on)
Set(DENOISE(rx)=on)
using =8000, 16000 and 32000 but all calls looked like to have se same
audio gain.
thanks for your rapid reply.
I dont using these functions (AGC/ DENOISE). My suggestion... try invert
the priorities:
Set(DENOISE(tx)=on)
Set(DENOISE(rx)=on)
Set(AGC(rx)=)
Set(AGC(rx)=)
And try higher values.. is more easy the perception if the values are
larger than default.
Att,
*Rafael dos Santos Saraiva*
Another question, what audio format I use in MixMonitor to maintain a
connection with reasonable quality and reduce the use of I / O disk? Today
I use wav.
tks
2014-07-24 9:05 GMT-03:00 Eduardo Leones edua...@ypytecnologia.com.br:
Thank you all for the answers. I will do tests to find the
I have a pair of Asterisk 11.5.1 servers operating as a load balanced cluster,
with DNS SRV records set up to weight them 60/40 relative to each other (both
at priority 0). The back-end is MySQL Realtime, and everything works pretty
well with the Cisco SPA phones ATAs that represent the
Please don't top-post.
Please trim irrelevant posts.
On Thu, 24 Jul 2014, Eduardo Leones wrote:
Another question, what audio format I use in MixMonitor to maintain a
connection with reasonable quality and reduce the use of I / O disk?
I think the question is premature.
You have a resource
On Thu, Jul 24, 2014 at 6:15 AM, Sameer Rathod sam...@hostnsoft.com wrote:
I am using centos 6.4 and 6.5
steps to install pjprojects is
a) git clone https://github.com/asterisk/pjproject pjproject
b) cd pjproject
c) ./configure --prefix=/usr --enable-shared --disable-sound
I have a dialplan (freepbx) that plays a busy signal in-band when an extension
is busy (before an Answer). Stripped down, it looks like this:
exten = 1005,n,PlayTones(busy)
exten = 1005,n,Busy(20)
Note that there is no Answer() prior to this. Our trunk is a PRI.
When I call into this extension
Issue is what subject says. Here is the background.
Version: 11.11.0
Topology: Asterisk Box at our Data Center behind Cisco Firewall.
Everything works fine from remote offices over a VPN. Issue is sales team
would like to connect up to our Asterisk box remotely (offnet). Common
enough
Just found the solution in case someone down the line stumbles across this.
externaddr only works with localnet defined in sip.conf.
Again, was simply misled due to UDP working but TCP not working.
This also resolved the issue with TLS which makes sense.
On Thu, Jul 24, 2014 at 5:12 PM, D.H.
15 matches
Mail list logo
