Does asterisk support T38 passthrough now? What version onwards?
ANy ideas on how to configure it for a host?
___
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update
guys...any opinions on the below?
--- On Mon, 6/8/09, Jay Ray jonty...@yahoo.com wrote:
From: Jay Ray jonty...@yahoo.com
Subject: [asterisk-users] Achoring MEdia
To: asterisk-users@lists.digium.com
Date: Monday, June 8, 2009, 1:43 AM
I have 2 hosts that Asterisk is in between
I have 2 hosts that Asterisk is in between of...and for both I have
canreinvite=no - but asterisk still sends re-invite to get out of the media
path.
Proxy 1 -- Asterisk-- Proxy 2
I want asterisk to anshor media..
In extenstions.conf I have an entry to send calls for say 5551000 to proxy 2
Setup is:
Asterisk ---NAT-- SIP Proxy
I have following entry for SIP Proxy in sip.conf
[Proxy]
type=peer
host=Static IP (NAT Firewalls public IP)
username=
secret=x
nat=yes
canreinvite=no
qualify=yes
Proxy sends a call and I get this error
Found no matching
-Commercial Discussion
asterisk-users@lists.digium.com
Date: Tuesday, August 26, 2008, 11:15 PM
El mar, 26-08-2008 a las 19:46 -0700, Jay Ray escribió:
Any pointers on this one?
--- On Tue, 8/26/08, Jay Ray [EMAIL PROTECTED] wrote:
From: Jay Ray [EMAIL PROTECTED]
Subject
To: [EMAIL PROTECTED], Asterisk Users Mailing List - Non-Commercial
Discussion asterisk-users@lists.digium.com
Date: Tuesday, August 26, 2008, 11:22 PM
It would be clearer if it said Hookstate (FXS ports only): Offhook
i.e. the state information is not valid for FXO ports.
Jay Ray wrote:
Any
, August 26, 2008, 11:15 PM
El mar, 26-08-2008 a las 19:46 -0700, Jay Ray escribió:
Any pointers on this one?
--- On Tue, 8/26/08, Jay Ray [EMAIL PROTECTED] wrote:
From: Jay Ray [EMAIL PROTECTED]
Subject: [asterisk-users] X100P Card in OFFHOOK state
To: asterisk-users
After I make a call o n the Zaptel Card X100P FXO moduleit remains offhook
state as shown here...
Signalling Type: FXS Kewlstart
Radio: 0re2uk*CLI
Owner: None*CLI
Real: Nonek*CLI
Callwait: NoneI
Threeway: NoneI
Confno: -12uk*CLI
Propagated Conference: -1
Real in conference: 0
DSP:
Any pointers on this one?
--- On Tue, 8/26/08, Jay Ray [EMAIL PROTECTED] wrote:
From: Jay Ray [EMAIL PROTECTED]
Subject: [asterisk-users] X100P Card in OFFHOOK state
To: asterisk-users@lists.digium.com
Date: Tuesday, August 26, 2008, 12:24 PM
After I make a call o n the Zaptel Card X100P FXO
Hi,
I am running Asterisk 1.4.21.2 on Fedora Core 2. Looks like The Asterisk
Process dies after a few hours...I have full debugging turned on but file
/var/log/asterisk/full does not show anything specifc..neither does
var/log/messages..
dmesg also shows nothing specific to Asterisk
...
Thx again
--- On Thu, 8/14/08, Jay Ray [EMAIL PROTECTED] wrote:
From: Jay Ray [EMAIL PROTECTED]
Subject: Re: [asterisk-users] Unable to create ZAP Channel
To: Asterisk Users Mailing List - Non-Commercial Discussion
asterisk-users@lists.digium.com
Date: Thursday, August 14, 2008, 11:58 PM
@lists.digium.com
Date: Thursday, August 14, 2008, 1:16 AM
On Wed, Aug 13, 2008 at 09:51:07PM -0700, Jay Ray wrote:
Her eis my call flow
Sofphone -- Asterisk-- X100P card-- Home Phone line
Home phone line plugged in LINE port of the FXO ccard (2 port)
Here is the error I get
Aug 13 22:35
Date: Thursday, August 14, 2008, 2:31 AM
On Wed, Aug 13, 2008 at 10:57:28PM -0700, Jay Ray wrote:
Here it is:
[asterisk]# asterisk -rx 'zap show channel 1'
Unable to find given channel 1
Verbosity is at least 20
cat /proc/zaptel/*
(or do you use dahdi instead?)
--
Tzafrir
List - Non-Commercial
Discussion asterisk-users@lists.digium.com
Date: Thursday, August 14, 2008, 2:24 AM
Output of 'zap show status' (in asterisk)
Run 'ztcfg' from the command line and check that out too...
PaulH
Jay Ray wrote:
Here it is:
[asterisk]# asterisk -rx 'zap show channel 1
14, 2008, 12:31 PM
On Thu, Aug 14, 2008 at 09:13:56AM -0700, Jay Ray wrote:
cat /proc/zaptel/*
Span 1: WCFXO/0 Generic Clone Board 1 (MASTER) RED
1 WCFXO/0/0 FXSKS RED
It is configured. But it is not open. Your zapata.conf looks ok. So next
thing to do would be to check the logs
, Jay Ray wrote:
I have enabled fulllogging.and looking at full file in
/var/log/asterisk/ I cannot find anything for chan_zap.c...
Output of unload and load is:
fedoracore2uk*CLI unload chan_zap.so
== Manager unregistered action ZapDialOffhook
== Manager unregistered action
: Thursday, August 14, 2008, 1:19 PM
On Thu, Aug 14, 2008 at 10:01:03AM -0700, Jay Ray wrote:
I have enabled fulllogging.and looking at full file in
/var/log/asterisk/ I cannot find anything for chan_zap.c...
Output of unload and load is:
fedoracore2uk*CLI unload chan_zap.so
== Manager
+0300, Tzafrir Cohen wrote:
On Thu, Aug 14, 2008 at 10:01:03AM -0700, Jay Ray wrote:
Loaded /usr/lib/asterisk/modules/chan_zap.so = (Zapata
Telephony)
== Parsing '/etc/asterisk/zapata.conf': Found
-- Automatically generated pseudo channel
== Registered channel type 'Zap' (Zapata
/congested at this time
--- On Thu, 8/14/08, Tzafrir Cohen [EMAIL PROTECTED] wrote:
From: Tzafrir Cohen [EMAIL PROTECTED]
Subject: Re: [asterisk-users] Unable to create ZAP Channel
To: asterisk-users@lists.digium.com
Date: Thursday, August 14, 2008, 1:50 PM
On Thu, Aug 14, 2008 at 10:36:21AM -0700, Jay
to create ZAP Channel
To: asterisk-users@lists.digium.com
Date: Thursday, August 14, 2008, 1:50 PM
On Thu, Aug 14, 2008 at 10:36:21AM -0700, Jay Ray wrote:
Zapata.conf..is as follows
So what was the zapata.conf you posted above?
zaptel]# cat /etc/asterisk/zapata.conf
[channels]
language=en
@lists.digium.com
Date: Thursday, August 14, 2008, 2:13 PM
On Thu, Aug 14, 2008 at 11:04:45AM -0700, Jay Ray wrote:
put channel in its own line...still same error when trying to grap Zap
channel
Have you restarted asterisk?
--
Tzafrir Cohen
icq#16849755 jabber:[EMAIL
ZapDialOffhook
Aug 13 10:32:11 VERBOSE[8625]: == Manager registered action ZapDNDon
Aug 13 10:32:11 VERBOSE[8625]: == Manager registered action ZapDNDoff
Aug 13 10:32:11 VERBOSE[8625]: == Manager registered action ZapShowChannels
--- On Thu, 8/14/08, Jay Ray [EMAIL PROTECTED] wrote:
From
dial_exec: Unable to create
channel of type 'Zap'
== Everyone is busy/congested at this time
--- On Thu, 8/14/08, Jay Ray [EMAIL PROTECTED] wrote:
From: Jay Ray [EMAIL PROTECTED]
Subject: Re: [asterisk-users] Unable to create ZAP Channel
To: Asterisk Users Mailing List - Non-Commercial Discussion
@lists.digium.com
Date: Thursday, August 14, 2008, 4:18 PM
On Thu, Aug 14, 2008 at 01:05:27PM -0700, Jay Ray wrote:
Thx for helping out...
I had just run reload after making that change..however, after
restarting...I get following error:
[chan_zap.so] = (Zapata Telephony)
== Parsing
PM
On Thu, Aug 14, 2008 at 01:52:18PM -0700, Jay Ray wrote:
[EMAIL PROTECTED] asterisk-1.0.5]# cat /proc/zaptel/1
Span 1: WCFXO/0 Generic Clone Board 1 (MASTER) RED
1 WCFXO/0/0 RED
The channel signalling is not set.
Make sure you have a proper /etc/zaptel.conf and run ztcfg
-users@lists.digium.com
Date: Wednesday, August 13, 2008, 12:26 AM
Which versions of Zaptel have you tried to build?
PaulH
Jay Ray wrote:
Any ideas, please they are highly appreciated
--- On *Mon, 8/4/08, Jay Ray /[EMAIL PROTECTED]/* wrote:
From: Jay Ray [EMAIL PROTECTED
Her eis my call flow
Sofphone -- Asterisk-- X100P card-- Home Phone line
Home phone line plugged in LINE port of the FXO ccard (2 port)
Here is the error I get
Aug 13 22:35:31 VERBOSE[8625]: -- Executing
1;36;40mDial0;37;40m(1;35;40mSIP/xlite1-a0fb0;37;40m,
Any ideas, please they are highly appreciated
--- On Mon, 8/4/08, Jay Ray [EMAIL PROTECTED] wrote:
From: Jay Ray [EMAIL PROTECTED]
Subject: [asterisk-users] FC2 and Zaptel
To: asterisk-users@lists.digium.com
Date: Monday, August 4, 2008, 12:02 AM
Hi,
I am using an older Fedora - FC2
Hi,
I am using an older Fedora - FC2 and trying to install zaptel.(for X100P card
I have - FXO with one line port and one Phone port)
Fist I tried installin from RPM...as given here (also tried installing Zapata)
http://www.voip-info.org/wiki/view/Asterisk+Linux+Fedora (FC2 is at the end)
in extension.confmake an entry like this:
exten = 1866999,1,VoicemailMain(${EXTEN})
When any person dialed 1866999, he will be prompted for Mailbox # and passwd
Should work.!JD Austin [EMAIL PROTECTED] wrote:
Depends on your dial plan.for me it's *98 then enter mail box number
Use SIP instead of H323 on Clarent and it will work
fine
--- Jorge Alayon [EMAIL PROTECTED] wrote:
Hello,
I have a carrier that is offering me service in
H.323, but their platform is
Clarent and I am not being able to connect my
Asterisk box to it using the
parameters they give me (H.323
Thx manI will try to start it from withing DDDNo one responded in DEV listSeth Remington [EMAIL PROTECTED] wrote:
On Mon, 2005-03-28 at 15:04 -0800, Jay Ray wrote: Hi, I am running Asterisk on Fedora Core 3. I am trying to use DDD to debug Asterisk. However, when I attach the debugger
Hi All,
I want to use Asterisk for VoiceMail for a softswitch.
I can dial in to leave voicemail and retrieve. Now there are many SIP Endpoints registered to the Softswitch. The Asterisk is sending a NOTIFY msg to the Softswitch on ip addr:0
Somehow Asterisk Looses the port from where the
Hi,
I am running Asterisk on Fedora Core 3. I am trying to use DDD to debug Asterisk. However, when I attach the debugger to the Asterisk Process, the Asterisk CLI promt hangs. Does not give any output, and Asterisk stops processing calls...
What could be wrong and what is the best way to debug
Hi
I have the X100P card which as to sockets (LINE - for fxo line ) and PHONE (to connect a n analog line)
This card is setup as fxs_ks
I was getting dial tone but suddenly no Dial ToneHelp appreciated
When I try to route the Call using - Dial Zap/1) to this FXO Line I get this
35 matches
Mail list logo
