Should be able to edit the following lines in
/etc/asterisk/voicemail.conf
; Who the e-mail notification should appear to come from
serveremail=asterisk
;[EMAIL PROTECTED]
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Jim Suber
Sent: Wednesday, 6 June 2007 2:20
] On Behalf Of Drew
Gibson
Sent: Saturday, 10 March 2007 12:04 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Zaptel problem after upgrading to 1.2.16
Mark Davies wrote:
Hi guys,
I'm hoping I've made a silly mistake here, but I've been staring
)
What do I need to do for Asterisk to be able to see the Zaptel device
while running as root?
Again, any help is much appreciated.
Regards,
Mark.
From: Mark Davies
Sent: Friday, 9 March 2007 4:13 PM
To: 'asterisk-users@lists.digium.com'
Subject: Zaptel problem after
problem after upgrading to 1.2.16
Mark Davies wrote:
Hi guys,
I'm hoping I've made a silly mistake here, but I've been staring at the
screen for the past few hours and I can't work it out.
I upgraded to 1.2.16 recently, and am having problems with zaptel.
The card is detected, I get
Hi guys,
I'm hoping I've made a silly mistake here, but I've been staring at the
screen for the past few hours and I can't work it out.
I upgraded to 1.2.16 recently, and am having problems with zaptel.
The card is detected, I get a reasonable output from ztcfg -vv, and
zttool shows
Hi all,
I've just been told from an ex workmate that my VSP (who I used to work
for) has put an anti flooding limit of 80 SIP messages per IP per minute
in place.
I run the phone system for a facility that has a lot of extensions, but
would rarely have more than 4 or 5 simultaneous
Hi guys,
I'm getting the following error when trying to compile zaptel on a
debian machine running 2.4.27-3-386.
gcc -g -c -I. -Iinclude -O4 -g -Wall -DBUILDING_TONEZONE
-DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\/etc/zaptel.conf\ -I. -Iinclude
-O4 -g -Wall -DBUILDING_TONEZONE
asterisk:~# apt-get install kernel-headers-`uname -r`
Reading Package Lists... Done
Building Dependency Tree... Done
kernel-headers-2.4.27-2-386 is already the newest version.
Tzafrir Cohen wrote:
On Wed, Jun 28, 2006 at 05:22:17PM +0800, Mark Davies wrote:
Hi guys,
I'm getting
Or just pop down to your local computer store and get a molex splitter.
Regards,
Mark.
Rich Adamson wrote:
The fxs ports have to generate ringing voltage (about 90 vac) and they
use the 12 volt power supply to do that. When an fxs port is not
ringing, it consumes about the same amount of
