Hi Paulo,
Make sure your DID number is in the e.164 format, ie, +15551234567. I had
the same issue with bandwidth.com and that fixed the problem.
HTH,
Zaheer
_
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Paulo Pinheiro
Sent: Wednesday, January 02, 2008 11:21
Would it be possible to install FreePBX on an AsteriskNOW system? The one
thing I really like about AsteriskNOW is the reduced attack surface b/c it
is running on an rpath appliance. Are there any appliances out there that
combine asterisk with freepbx?
Regards,
Zaheer
_
From:
Hi Joe,
In your SIP.conf, under [general] try setting externip=XXX.XXX.XXX.XXX to
your public IP address.
Hope this helps,
Zaheer
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Joe Acquisto
Sent: Friday, December 14, 2007 2:44 PM
To:
Hey does anyone have any suggestions for this? Is this an asterisk issue or
a phone issue? Thanks!
Regards,
Zaheer
_
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Zaheer K.
Master
Sent: Friday, December 07, 2007 11:22 AM
To: 'Asterisk Users Mailing List - Non
Hi all,
I'm not getting any sidetone on my Snom 370. I searched the web and the snom
wiki, but I don't see any place to enable/adjust it. Callers say I sound
great on the other end, but I don't hear myself so it is a little
off-putting. Any suggestions would be appreciated.
On a related note,
Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Nick Brown
Sent: Tuesday, November 27, 2007 7:27 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] SIP port 5060 closed - how do I open it?
Zaheer,
On 28/11/07 9:28 AM, Zaheer K
No I scanned the private IP of the server, so it has to be from inside the
network.
If * is listening on 5060, why doesn't it have LISTEN next to it? Is that
shown only for TCP connections?
_
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Jaswinder
Singh
Sent:
I ran an nmap scan on my server and got the following result:
Starting Nmap 4.23RC3 ( http://insecure.org ) at 2007-11-28 10:29 Eastern
Standard Time
Interesting ports on ool-4b7fda52.static.optonline.net (75.127.218.82):
PORT STATE SERVICE
5060/udp open|filtered sip
So I'm pretty
Hi all,
I have *NOW beta 6 (asterisk 1.4.5) and I've configured it with a SIP trunk
line. I can make outgoing calls, but I cannot receive any incoming calls. A
port scan of my * server shows that port 5060 is closed. How do I open this
port? In my users.conf, I have set [trunk_1] to hassip=yes
Hi Adrian here is what I got when I ran the command you suggested:
netstat -an|grep 5060
udp0 0 0.0.0.0:50600.0.0.0:*
I also ran netstat -l and got the following:
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address
Hi Adrian here is what I got when I ran the command you suggested:
netstat -an|grep 5060
udp0 0 0.0.0.0:50600.0.0.0:*
I also ran netstat -l and got the following:
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address
So can anyone tell me why the * server is not listening on UDP port 5060?
Thanks,
Zaheer
_
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Zaheer K.
Master
Sent: Tuesday, November 27, 2007 11:20 AM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion
Yes I have a sip.conf, contents as follows:
[general]
context=default
allowoverlap=no
bindport=5060
bindaddr=0.0.0.0
srvlookup=yes
allowexternaldomains=no
allowexternalinvites=no
allowguest=no
allowsubscribe=no
allowtransfer=yes
alwaysauthreject=no
autodomain=no
callevents=no
canreinvite=nonat
Hi All,
I'm running asterisk 1.4.5 (on AsteriskNOW beta 6 appliance) and using Snom
360/370 phones with direct SIP trunking from bandwidth.com. I can make
outgoing calls, and the person on the receiving end can hear my voice, but I
cannot hear them. I also cannot receive incoming calls to my DID
A friend directed me to the NAT support option in the advanced menu. Setting
the external IP to my public IP address solved the issue.
Regards,
Zaheer
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Zaheer K.
Master
Sent: Monday, November 26, 2007 10:17
Hi Jonn will these scripts work with CentOS 5?
--Zaheer
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Jonn R Taylor
Sent: Tuesday, November 13, 2007 10:12 AM
To: asterisk-users@lists.digium.com
Subject: [asterisk-users] Install Scripts for CentOS 4
Hi
Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Install Scripts for CentOS 4
No, I am working on that.
Jonn
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Zaheer K.
Master
Sent: Tuesday, November 13, 2007 10:16 AM
To: 'Asterisk Users
Hi all,
We're running AsteriskNOW Beta 6, and port 5060 is closed. We've checked it
with a port scanner and the port is definitely closed. How do we open that
port, either through the GUI or CLI. Is there any way to access the linux
command line through AsteriskNOW?
Thanks in advance!
18 matches
Mail list logo
