Hi,
Thanks Matthew for trying to reproduce the problem, I appreciate your
efforts very much.
There must be something off in my setup in one way or another. I could just
discard this server and build a new one, but I think it's not good practice
to leave a problem unsolved, so I'll continue
Olli Heiskanen wrote:
Hi,
Thanks Matthew for trying to reproduce the problem, I appreciate your
efforts very much.
There must be something off in my setup in one way or another. I could
just discard this server and build a new one, but I think it's not good
practice to leave a problem
Hi Joshua,
Excellent! I didn't even remember to consider newer versions of asterisk as
11.11 was the latest one when I started building on. I have had libuuid and
libuuid-devel installed the whole time, but perhaps 11.11 just did not see
it there. I just installed 11.13 and it works perfectly.
On Thu, Oct 2, 2014 at 10:18 AM, Olli Heiskanen
ohjelmistoarkkite...@gmail.com wrote:
Hi,
Thanks Eric for your reply, yes I know Asterisk replaces the sdp, however it
should create ice lines when calling to a webrtc client, which it is
currently not doing.
To recap my problem (check
Hi,
Is there anything I can do with this problem? Re-installing Asterisk does
not solve this and the problem still persists. Or is there any other logs
or configurations I can provide to help figure out why Asterisk is removing
lines from the sdp?
Any ideas would be greatly appreciated! I also
-Commercial Discussion
Subject: Re: [asterisk-users] Asterisk removes ice lines in sdp when calling
between webrtc clients
Hi,
Is there anything I can do with this problem? Re-installing Asterisk does not
solve this and the problem still persists. Or is there any other logs or
configurations I
: [asterisk-users] Asterisk removes ice lines in sdp when
calling between webrtc clients
Hi,
Is there anything I can do with this problem? Re-installing Asterisk does
not solve this and the problem still persists. Or is there any other logs
or configurations I can provide to help figure out
Hello,
I have a problem with a call between 2 webrtc clients. Asterisk removes the
ice-related lines from the sdp when it sends the INVITE out, and the called
webrtc client rejects the INVITE due to the missing ice lines. Both webrtc
clients are defined exactly the same way, same values in all
On Mon, Sep 8, 2014 at 9:48 AM, Olli Heiskanen
ohjelmistoarkkite...@gmail.com wrote:
Hello,
I have a problem with a call between 2 webrtc clients. Asterisk removes
the ice-related lines from the sdp when it sends the INVITE out, and the
called webrtc client rejects the INVITE due to the
Hi Matthew,
Here's the debug output:
--- SIP read from UDP:PU.BL.IC.IP:5060 ---
INVITE sip:6...@testers.com SIP/2.0
Record-Route: sip:PU.BL.IC.IP;r2=on;lr=on;ftag=856i7ei98p;nat=yes
Record-Route:
sip:PU.BL.IC.IP;transport=ws;r2=on;lr=on;ftag=856i7ei98p;nat=yes
Via: SIP/2.0/UDP
On Mon, Sep 8, 2014 at 10:19 AM, Olli Heiskanen
ohjelmistoarkkite...@gmail.com wrote:
Hi Matthew,
Here's the debug output:
--- SIP read from UDP:PU.BL.IC.IP:5060 ---
INVITE sip:6...@testers.com SIP/2.0
Record-Route: sip:PU.BL.IC.IP;r2=on;lr=on;ftag=856i7ei98p;nat=yes
Record-Route:
Hi,
My bad, below is the output for peer 661 and the log output, which does not
tell me much. I guess Asterisk assumes it's working correctly as there are
no errors etc, however for some reason the INVITE leaves Asterisk without
the ice definitions in the sdp. I must assume it's a configuration
12 matches
Mail list logo
