On 05/10/12 00:09, Richard Mudgett wrote:
Please just reply to the mailing list.
oops, that was my intention, my bad.
Are you able to make calls when in PTP mode?
I just tested: yes it seams so!
The warning message is just
complaining about receiving unexpected TEI management messages
Hi,
I'm experiencing difficulties to get a B410P running with Asterisk
10.3.1 and DAHDI 2.6.1.
Am I supposed to use DAHDI for this card and ISDN BRI for my country
(Belgium)?
thx,
BC
--
_
-- Bandwidth and Colocation
On 05/09/2012 12:59 PM, Bart Coninckx wrote:
Hi,
I'm experiencing difficulties to get a B410P running with Asterisk
10.3.1 and DAHDI 2.6.1.
Am I supposed to use DAHDI for this card and ISDN BRI for my country
(Belgium)?
That is the supported method to use in standard Asterisk, yes. DAHDI,
Hi Bart,
here is a working configuration in Netherlands:
/etc/dahdi/system.conf:
span = 1,1,0,ccs,ami
bchan = 1,2
hardhdlc = 3
span = 2,1,0,ccs,ami
bchan = 4,5
hardhdlc = 6
span = 3,1,0,ccs,ami
bchan = 7,8
hardhdlc = 9
span = 4,1,0,ccs,ami
bchan = 10,11
hardhdlc = 12
loadzone= nl
Hi Khalid,
my setup is almost identical
except for
loadzone = be
defaultzone = be
(obviously)
and in
chan_dahdi.conf:
[isdn4]
signaling = bri_cpe_ptmp
switchtype = euroisdn
group = 2
context = isdn
dahdichan = 10,11
this results into:
ERROR[1021]: chan_dahdi.c:14182 dahdi_pri_error: PRI
Hi Khalid,
my setup is almost identical
except for
loadzone = be
defaultzone = be
(obviously)
and in
chan_dahdi.conf:
[isdn4]
signaling = bri_cpe_ptmp
switchtype = euroisdn
group = 2
context = isdn
dahdichan = 10,11
this results into:
ERROR[1021]:
Right you are,
but when using bri_cpe I get:
[May 9 23:08:45] WARNING[2775]: sig_pri.c:6969 pri_dchannel: PRI Error
on span 4: Received MDL/TEI managemement message, but configured for
mode other than PTMP!
This repeats itself every second.
The
bri_cpe_ptmp
settings seems to give the
Please just reply to the mailing list.
- Original Message -
Right you are,
but when using bri_cpe I get:
[May 9 23:08:45] WARNING[2775]: sig_pri.c:6969 pri_dchannel: PRI
Error
on span 4: Received MDL/TEI managemement message, but configured for
mode other than PTMP!
This