and this is the /var/spool/hylafax/log/c1: http://pastebin.ca/403282
cat /var/spool/hylafax/log/c3 :: http://pastebin.ca/403291
thank you
___
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
that's work know i don't know where is the problem but i folowed the
links bellow:
http://www.guardiani.us/index.php/TrixBox_IAXModem_HylaFax#Satisfy_HylaFax_Deps
http://www.ecualug.org/?q=2007/02/27/comos/como_recibir_fax_en_asterisk
http://threebit.net/mail-archive/asterisk-users/msg04703.html
-Original Message-
From: [EMAIL PROTECTED] [mailto:asterisk-users-
[EMAIL PROTECTED] On Behalf Of younss azzayani
Sent: Tuesday, March 20, 2007 3:52 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Configuring Faxs any help
thank you :)
___
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
younss azzayani wrote:
and this is the /var/spool/hylafax/log/c1:
http://pastebin.ca/403282
cat /var/spool/hylafax/log/c3 ::
http://pastebin.ca/403291
What does zttest say? If it's below 99.98% then hardware configuration
is where the problem is.
Lee.
Hello, everyone.
I get
Best: 99.975586 -- Worst: 99.975586 -- Average: 99.975586
with zttest
Where do I have to start looking for hardware errors?
Thanks in advance
younss azzayani wrote:
and this is the /var/spool/hylafax/log/c1:
http://pastebin.ca/403282
cat
zfter running zttool i got:
--- Results after 303 passes ---
Best: 100.00 -- Worst: 99.987793 -- Average: 99.994914
___
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
dima wrote:
I get
Best: 99.975586 -- Worst: 99.975586 -- Average: 99.975586
with zttest
Where do I have to start looking for hardware errors?
I would start with IRQ sharing. Make sure that your Zap hardware isn't
sharing an IRQ. Secondly, you want to have it with a fairly high
priority,
younss azzayani wrote:
zfter running zttool i got:
--- Results after 303 passes ---
Best: 100.00 -- Worst: 99.987793 -- Average: 99.994914
Okay. Then at this point you need to put record in your iaxmodem
config file, restart iaxmodem, attempt the call again, and afterwards
send me
Indeed, the IRQ priority of my card is low. Sorry for being lame, but
does that have to be set in BIOS? Are there any best practices for
choosing an IRQ or I can set it to any free number?
I would start with IRQ sharing. Make sure that your Zap hardware isn't
sharing an IRQ. Secondly, you
That is going to depend upon your motherboard hardware, most likely.
Understand that in most cases the NIC and hard drives are usually going
to be the most demanding interrupt resource competitors to the Zap
hardware, and that the Zap hardware cannot often operate properly (i.e.
for fax)
Hi everybody,
after installing hylafax iaxmodem i get this email
==
The HylaFAX software thinks that there is a problem with the modem
on device /dev/ttyIAX that needs attention; repeated attempts to
initialize the modem have failed.
Consult the server trace logs for more
younss azzayani wrote:
Hi everybody,
after installing hylafax iaxmodem i get this email
==
The HylaFAX software thinks that there is a problem with the modem
on device /dev/ttyIAX that needs attention; repeated attempts to
initialize the modem have failed.
This would be
younss azzayani wrote:
Hi everybody,
after installing hylafax iaxmodem i get this email
==
The HylaFAX software thinks that there is a problem with the modem
on device /dev/ttyIAX that needs attention; repeated attempts to
initialize the modem have failed.
Consult the
14 matches
Mail list logo