Tom Lanyon wrote:
Hi all,
Can I ask that you please keep my personal address in the To: or CC:
in this thread as for some reason I'm only getting half of the list
emails coming through, and they're not showing up on the digium
pipermail archive either. The list archive on
What kind of switch are you connecting the phones to? I've seen that
behaviour with cheap Repotec switches (24+2Gigabit). Just replacing it
with a different one fixed the problem.
Julian J. M.
On 7/31/07, Tom Lanyon [EMAIL PROTECTED] wrote:
The issues:
Dropouts - by far the most
Hi all,
Can I ask that you please keep my personal address in the To: or CC:
in this thread as for some reason I'm only getting half of the list
emails coming through, and they're not showing up on the digium
pipermail archive either. The list archive on http://marc.info seems
to have the
Hi all,
We have recently implemented an Asterisk system using Trixbox
(asterisk v1.4.4 at the moment, yet to move to 1.4.9) but are getting
pressure to switch back to our old key system unless we fix two major
issues. So please help me avoid switching back!
An overview: We have about 12
Turn OFF CDP on the phones. I don't know if those phones support CDP,
but since CDP is the Cisco Discovery Protocol and those Linksys is owned
by Cisco As for Echo Canceling, that is the job of the device that
does VoIP/PSTN gateway functions.
Tom Lanyon wrote:
Hi all,
We have
Tom Wrote:
Hi all,
We have recently implemented an Asterisk system using Trixbox
(asterisk v1.4.4 at the moment, yet to move to 1.4.9) but are
getting pressure to switch back to our old key system unless
we fix two major issues. So please help me avoid switching back!
Have you tried
But the OP stated this was SIP - SIP calls -- As Dan mentioned, check
environmental issues -- hard walls, poor handset quality, noisy desks,
volume levels too high?
Eric ManxPower Wieling wrote:
by Cisco As for Echo Canceling, that is the job of the device that
does VoIP/PSTN gateway
Drat! That also could be a a major cause of the issues he is having.
Dan Austin wrote:
Tom Wrote:
Hi all,
We have recently implemented an Asterisk system using Trixbox
(asterisk v1.4.4 at the moment, yet to move to 1.4.9) but are
getting pressure to switch back to our old key system
