On Tue, Nov 25, 2008 at 10:26:43PM -0600, [EMAIL PROTECTED] wrote:
Greetings List
I have connected my asterisk box with x100 2xfxo and xorcom 8xfxo and all
of them give me the error Ring/Off-hook in strange state 6.
DAHDI? Zaptel? What version?
Whenever the caller hangup, the call
Versions
- Asterisk 1.4.22
- DAHDI Linux 2.0.0
- DAHDI Tools 2.0.0
- Libpri 1.4.7
- Addons 1.4.7
Here is chan_dahdi.conf
;
; DAHDI telephony interface
[trunkgroups]
[channels]
context=from-pstn
switchtype=national
signalling=fxo_ks
rxwink=300
hidecallerid=no
callwaiting=yes
Greetings List
I have connected my asterisk box with x100 2xfxo and xorcom 8xfxo and all
of them give me the error Ring/Off-hook in strange state 6.
Whenever the caller hangup, the call continue to execute until it hits the
hard coded hangup. I changed chan_dadhi busydetect=no and
Hi,
I had a similar problem when I had signalling set at FXS_KS for my 4 FXS
port TDM400P card. I've read long time ago that the signalling in
Australia (where I am) is FXS_LS, so that solved that for me. Try
different signalling methods, hopefully that will solve your problem.
Apparently,
Digium says it is a problem with the telco line. And of course telco
says problem is internal. I am going to call them back tomorrow and
make sure that disconnect supervision is enabled.
On 6/26/07, Alex Mcdowell [EMAIL PROTECTED] wrote:
I don't have caller ID at all, not on the verizon side
Can anybody at least point me in a direction??
On 6/25/07, Alex Mcdowell [EMAIL PROTECTED] wrote:
I don't think my cards are bad, but maybe there is a problem with the
one. It has been two weeks since I put my ticket in with Digium...and
still no word. I am starting to get frustrated.
On
I have seen this on cards waiting for the callerID and there being a problem
with the callerid signal. Is callerid working on theses lines?
On 6/26/07, Alex Mcdowell [EMAIL PROTECTED] wrote:
Can anybody at least point me in a direction??
On 6/25/07, Alex Mcdowell [EMAIL PROTECTED] wrote:
I
Daniel already pointed you in the right direction.
I have seen this error many times, but it never causes a problem.
Alex Mcdowell wrote:
Can anybody at least point me in a direction??
On 6/25/07, Alex Mcdowell [EMAIL PROTECTED] wrote:
I don't think my cards are bad, but maybe there is a
I don't have caller ID at all, not on the verizon side and
usecallerid=no in zapata.conf. I do, however have the DSL on this
line. I have a splitter and then I have a filter on the asterisk side.
I am guessing this is the root of the problem. Thanks for any
insight.-Alex
On 6/26/07, Eric
I don't think my cards are bad, but maybe there is a problem with the
one. It has been two weeks since I put my ticket in with Digium...and
still no word. I am starting to get frustrated.
On 6/22/07, Daniel Hazelbaker [EMAIL PROTECTED] wrote:
Alex,
I had this problem with a new
HI I have two servers both of which get this message on one of the lines.
Ring/Off-hook in strange state 6. The one server seems to be ok with it, but
the other one when an extension picks up there is no one there and the
incoming call keeps ringing. I tried to adjust the levels in wcfxo.c like
Alex,
I had this problem with a new TDM2400 card that we purchased.
Specifically I would get that message and then it would pick up the
ringing line AND the line next to it. Basically, lines 1 2 had
been cross-linked somehow. After a few weeks of trouble-shooting
with Digium tech
12 matches
Mail list logo
