On 6 Aug 2013, at 19:28, Mike Diehl wrote:
We got it fixed! Our co-lo is in the process of doing a network
reconfiguration/relocation and had changed their MTU to 1400 during
the transition. Once we did the same, everything started to work.
PMTU should take care of that. Are you blocking
Yes, it should have, but I don't think it's turned on by default...
Anyway, this lower MTU setting is just temporary, so I'll just live
with it for now.
Thanks for your assistance.
Mike.
On Wed, Aug 7, 2013 at 2:28 AM, Steven Howes steve-li...@geekinter.net wrote:
On 6 Aug 2013, at 19:28,
Hi all,
After being up and running for almost 2 years, we finally had to
reboot one of our servers. Now, however, it's having problems.
We're using real-time configuration for SIP peers and voicemail, via ODBC.
But when I run sip show peers I don't get anything. Even when I
load a known peer
On 8/6/13 5:30 AM, Mike Diehl wrote:
sip show peer voice12 load
This command just returns, with no output.
throwing out a random idea since it's early in the morning and you might
be in a big jam...
assuming the sip isnt working correctly at all (and its not just a
console issue),
after
I appreciate your quick response. I issued the commands specified and
got NO output!
===
CLI core set verbose 10
Verbosity was 25 and is now 10
CLI core set debug 10
Core debug was 25 and is now 10
CLI module unload chan_sip.so
CLI module load
On Tue, Aug 6, 2013 at 10:47 AM, Mike Diehl mdiehlena...@gmail.com wrote:
I appreciate your quick response. I issued the commands specified and
got NO output!
===
CLI core set verbose 10
Verbosity was 25 and is now 10
CLI core set debug 10
Core
No, my phones aren't getting a response from the server. I can't even
get any output from the server if I do:
sip show peer name load
This command usually loads the peer from the db and shows me it's
configuration. In this case, I get nothing.
I do have rtcachefriends=yes in my sip.conf. In
- Original Message -
No, my phones aren't getting a response from the server. I can't
even
get any output from the server if I do:
sip show peer name load
This command usually loads the peer from the db and shows me it's
configuration. In this case, I get nothing.
I do have
We got it fixed! Our co-lo is in the process of doing a network
reconfiguration/relocation and had changed their MTU to 1400 during
the transition. Once we did the same, everything started to work.
Thank you all for your time and quick responses.
Mike.
On Tue, Aug 6, 2013 at 10:44 AM, Tim
