On Wed, Nov 11, 2009 at 9:34 PM, Warren Selby wcse...@selbytech.com wrote:
The 7960 and 79x2 use different sip firmwares and as far a I have seen
the 7960 does not have the same port issue the 7941/2 seems to have
(which technically is not a problem, just an implementation of the sip
protocol
Just checked with my actual config file, and it's not a sanitation mistake,
that's how I've actually got mine setup. Like I said earlier, I've never
even messed with that section of my config before...I set mine up based on a
combination of configs I've found around the net (I think you've
The 7960 and 79x2 use different sip firmwares and as far a I have seen
the 7960 does not have the same port issue the 7941/2 seems to have
(which technically is not a problem, just an implementation of the sip
protocol that you don't typically see).
As to your issue, are you still seeing
In your sip.conf file, be sure to specify nat=no for the phone, even
though the phone is behind a nat device. The cisco phones handle sip
packets differently than the way asterisk expects, so you have to do
this in order to make asterisk send the way the phone will accept.
Thanks,
On Tue, Nov 10, 2009 at 10:13 AM, Warren Selby wcse...@selbytech.com wrote:
In your sip.conf file, be sure to specify nat=no for the phone, even
though the phone is behind a nat device. The cisco phones handle sip
packets differently than the way asterisk expects, so you have to do
this in
On Sat, Nov 7, 2009 at 11:36 AM, Warren Selby wcse...@selbytech.com wrote:
I think your featureLabel definition is wrong.
On the login issue, ssh to the ip of the phone and login first with
the user/pass you defined in the file (admin/123), then at the second
login prompt use log/log. That
On Sat, Nov 7, 2009 at 12:56 AM, Warren Selby wcse...@selbytech.com wrote:
That typically means you've got an error in your phone specific config file,
the SEP[MAC].cnf.xml.
You need to login to the phone via ssh and use the log/log login. Once
you've done that, look at the logs and see what
I think your featureLabel definition is wrong.
On the login issue, ssh to the ip of the phone and login first with
the user/pass you defined in the file (admin/123), then at the second
login prompt use log/log. That should get you the log files which will
show you your error.
Thanks,
