On Thursday 21 Jan 2016, Jerry Geis wrote:
> >Not really. Very little info to go on so far. You need to give us
> >more detail of what you are doing with AGI and AMI.
>
> Sorry - let me try again...
>
>
> I am basically doing the following:
> 1) calling a phone SIP/401 upon answer run an AGI
I am using the AMI interface to start calls.
At one point I have a 10 second delay "Wait(10)" in the dialplan...
During this time it "seems" that if I then connect with the manager
interface
and place a call that nothing happens till the 10 seconds is done...
I am requesting Async yes...
>>On Thursday 21 Jan 2016, Jerry Geis wrote:
>>* I am using the AMI interface to start calls.
*>> >>* At one point I have a 10 second delay "Wait(10)" in the dialplan...
*>>* During this time it "seems" that if I then connect with the manager
*>>* interface
*>>* and place a call that nothing
On Thursday 21 Jan 2016, Jerry Geis wrote:
> I am using the AMI interface to start calls.
>
> At one point I have a 10 second delay "Wait(10)" in the dialplan...
> During this time it "seems" that if I then connect with the manager
> interface
> and place a call that nothing happens till the 10
>Are you saying that this worked in earlier versions but you started to
>get the delay when you updated to 11.21.0? Or just that you happened to
>be using 11.21.0 the first time you tried this scenario?
I should have said "first time" trying this.
Any thoughts?
Jerry
--
In article
In article
>Not really. Very little info to go on so far. You need to give us
>more detail of what you are doing with AGI and AMI.
Sorry - let me try again...
I am basically doing the following:
1) calling a phone SIP/401 upon answer run an AGI for voice prompts etc...
to select AUDIO groups
2) when done
In article