Of Karsten Wemheuer
Sent: Thursday, September 19, 2013 10:54 AM
To: asterisk-users@lists.digium.com
Subject: Re: [asterisk-users] sipgate outgoing calls
Hi,
Am Mittwoch, den 18.09.2013, 14:29 +0100 schrieb
gpxctawjc...@irational.org:
Hello
i am trying to setup sipgate gateway
i can get
On Thu, 19 Sep 2013, David Duffett wrote:
i am getting these errors in asterisk cli
-- Executing [01179553708@default:1] Set(SIP/-015b,
CALLERID(num)=xx) in new stack
-- Executing [01179553708@default:2] Dial(SIP/-015b,
SIP/01179553708@sipgate,30,trg) in new stack
It looks like the challenge response after INVITE is not been accepted.
Provide more detail.
$ sip set debug peer sipgate
--
==
Miguel Oyarzo
DevOps Engineer
http://www.linkedin.com/in/mikeaustralia
Linux User: # 483188 - counter.li.org
Melbourne, Australia
It looks like the challenge response after INVITE is not been accepted.
Provide more detail.
$ sip set debug peer sipgate
server*CLI sip set debug peer sipgate
SIP Debugging Enabled for IP: 217.10.79.23:5060
Really destroying SIP dialog '3ef8ff1a6ec360626af409b112b860ee@127.0.1.1'
Method:
Challenge authentication look good.
--- SIP read from UDP:217.10.79.23:5060 ---
SIP/2.0 200 OK
Are you sure this number format 01179553708 is accepted in that SIP trunk?
Some VOIP providers only accept international format.
--
==
Miguel Oyarzo
DevOps Engineer
On Thu, 19 Sep 2013, Miguel Oyarzo wrote:
Challenge authentication look good.
--- SIP read from UDP:217.10.79.23:5060 ---
SIP/2.0 200 OK
Are you sure this number format 01179553708 is accepted in that SIP trunk?
Some VOIP providers only accept international format.
when i use a softphone
you have insecure=port,invite in sipgate peer?
On Thu, Sep 19, 2013 at 12:26 PM, gpxctawjc...@irational.org wrote:
On Thu, 19 Sep 2013, Miguel Oyarzo wrote:
Challenge authentication look good.
--- SIP read from UDP:217.10.79.23:5060 ---
SIP/2.0 200 OK
Are you sure this number format
What you don't have mentioned yet is whether your outbound call reaches
the destination.
--
==
Miguel Oyarzo
DevOps Engineer
http://www.linkedin.com/in/mikeaustralia
Linux User: # 483188 - counter.li.org
Melbourne, Australia
On 9/19/2013 8:26 PM,
Le 19/09/2013 05:01, David Duffett a écrit :
I believe registration is in place, otherwise inbound calls would not
work.
Yes, I didn't read carefully the original message, sorry.
[...]
--
Daniel
--
_
-- Bandwidth and
Hi,
Am Mittwoch, den 18.09.2013, 14:29 +0100 schrieb
gpxctawjc...@irational.org:
Hello
i am trying to setup sipgate gateway
i can get incoming calls fine, but when i dial in and then try to dial
out i get this in asterisk command line
What Sipgate product are You using? At least in
Hello
i am trying to setup sipgate gateway
i can get incoming calls fine, but when i dial in and then try to dial
out i get this in asterisk command line
-- Called 01179248615@sipgate
[Sep 18 13:58:30] NOTICE[28232]: chan_sip.c:17885
handle_response_invite: Failed to authenticate on INVITE to
Le 18/09/2013 15:29, gpxctawjc...@irational.org a écrit :
Hello
Hi
i am trying to setup sipgate gateway
i can get incoming calls fine, but when i dial in and then try to dial
out i get this in asterisk command line
-- Called 01179248615@sipgate
[Sep 18 13:58:30] NOTICE[28232]:
I believe registration is in place, otherwise inbound calls would not work.
Also, registration is not required for outbound calls to work.
I would suggest cutting down your sip.conf profile to this minimal
configuration:
host=sipgate.co.uk
username=xxx
fromuser=xxx
insecure=invite,port
13 matches
Mail list logo