I think what you want is called DISA
http://www.voip-info.org/tiki-index.php?page=Asterisk%20cmd%20DISA
DISA (Direct Inward System Access) Allows someone from outside the
telephone switch (PBX) to obtain an internal system dialtone
and to place calls from it as if they were placing a call from
This is simple since your using AMP,you can
create a ring group to dial that number out for you. First create your
ring group lets put number 200 for it (you can call it any number you want).
where the extension number goes just put there the phone number you want like
301212# don't for
, August 03, 2005
11:56 AM
To: Asterisk
Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users]
Transfer to outside line.
I think what you want is called DISA
http://www.voip-info.org/tiki-index.php?page=Asterisk%20cmd%20DISA
DISA (Direct Inward System Access) Allows
You could also set up a SIP extension, config a softphone and call forward it to the number is you prefer.TomOn Aug 3, 2005, at 3:39 PM, Ariel Batista wrote: This is simple since your using AMP, you can create a ring group to dial that number out for you. First create your ring group lets put
: Wednesday, August 03, 2005
3:40 PM
To: Asterisk
Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users]
Transfer to outside line.
This is simple since your using AMP,you can create a
ring group to dial that number out for you. First create your ring group
lets put number 200
: [Asterisk-Users] Transfer to outside line.
I think what you want is called DISA
http://www.voip-info.org/tiki-index.php?page=Asterisk%20cmd%20DISA
DISA (Direct Inward System Access) Allows someone from outside the telephone switch (PBX) to obtain an internal system dialtone and to place calls from
.
Ariel
- Original Message -
From:
Tim King
To: 'Asterisk Users Mailing List -
Non-Commercial Discussion'
Sent: Wednesday, August 03, 2005 5:24
PM
Subject: RE: [Asterisk-Users] Transfer to
outside line.
I tried this
solution, although ti acts like
I believe that on the digital receptionist configuration the last
option (after extension/voicemail/) is for a customization
command.
And you can use it to send the user to a extension context you define
(in extension_custom.conf if memory is good) with a destination
number specified on this