On Wed, 20 Feb 2008 12:41:41 +1100, Paul Hales
[EMAIL PROTECTED] wrote:
I have just been given the answer -
exten = *44,1,Answer
[snip]
Is this possible for ZAPHFC?
___
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
On Wed, 2008-02-20 at 08:45 +, David Quinton wrote:
On Wed, 20 Feb 2008 12:41:41 +1100, Paul Hales
[EMAIL PROTECTED] wrote:
I have just been given the answer -
exten = *44,1,Answer
[snip]
Is this possible for ZAPHFC?
No idea whatsoevermaybe FLASH followed by SENDDTMF
I have just been given the answer -
exten = *44,1,Answer
exten = *44,n,Noop(Check Callforward)
exten = *44,n,Set(_MISDN_KEYPAD=*#24#)
exten = *44,n,Dial(mISDN/1/)
exten = *44,n,Hangup
Where the line 'Set(_MISDN_KEYPAD=*#24#)' is where you set your code.
later,
PaulH
On Tue, 2008-02-19 at
Wow...where did you get that answer?
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
Paul Hales
Sent: Tuesday, February 19, 2008 8:42 PM
To: Asterisk Users List
Subject: Re: [asterisk-users] ISDN2 facility code...
I have just been given
PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
Paul Hales
Sent: Tuesday, February 19, 2008 8:42 PM
To: Asterisk Users List
Subject: Re: [asterisk-users] ISDN2 facility code...
I have just been given the answer -
exten = *44,1,Answer
exten = *44,n,Noop(Check Callforward
On Mon, 2008-02-18 at 16:35 +1100, Paul Hales wrote:
I spoke to a telco tech and he said I had to send a facility
codehuh?
Anyone with any ideas on this one?
I know there's a setting in zapata.conf called facilityenable -- have
you tried setting it to a value of yes? I'm not sure
On Mon, 2008-02-18 at 08:11 -0500, Jared Smith wrote:
On Mon, 2008-02-18 at 16:35 +1100, Paul Hales wrote:
I spoke to a telco tech and he said I had to send a facility
codehuh?
Anyone with any ideas on this one?
I know there's a setting in zapata.conf called facilityenable -- have
I am guessing that 'not yet handled' is not good news.
PaulH
P[ 2] I IND :SETUP oad:383208100 dad:93409098 pid:415 state:none
P[ 2] I SEND:PROCEEDING oad:0383208100 dad:93409098 pid:415
-- Executing Answer(mISDN/2-1, ) in new stack
P[ 2] * ANSWER:
P[ 2] I SEND:CONNECT oad:0383208100
I am trying to send 'codes' over an isdn2 link - such as *#24# - to
activate call forwarding.
But it doesn't work. I have tried sending it as a straight dial, and
also as a DTMF string...but no luck...
I spoke to a telco tech and he said I had to send a facility
codehuh?
Anyone
On Mon, 18 Feb 2008, Paul Hales wrote:
I am trying to send 'codes' over an isdn2 link - such as *#24# - to
activate call forwarding.
But it doesn't work. I have tried sending it as a straight dial, and
also as a DTMF string...but no luck...
I spoke to a telco tech and he said I had to send
10 matches
Mail list logo