sorry for being a pest but ... probably I bite more thatn I can chew. Been
looking on inet for info on that cts/rts thing and the only conclussion I
get to is that ... I'm more lost now.
I probably need to go down a few steps, any advice on what sort of
tutorials should I take before
Hi liyaoshi!
Thanks for the answer. Actually hciconfig gives no results at all, which
probably means the HC-05 is nt recognized in the system. What can I do
next??
Thanks for the advice :)
Pedro
El jueves, 15 de mayo de 2014 05:13:29 UTC+2, liyaoshi escribió:
As I understand , hciconifg
Check cts/rts pin mux ,if you make sure your tx/rx and GND is right .
And , check if cts /rts pull down when idle .
2014-05-15 15:32 GMT+08:00 Pedro Gonzalez perigon...@gmail.com:
Hi liyaoshi!
Thanks for the answer. Actually hciconfig gives no results at all, which
probably means the HC-05
Hi there!
Newbie here ... sorry if too basic or already answered somewhere, I can not
find what I'm looking for. Here is my problem:
I'm trying to connect my BBB to an android device via bluetooth. I'm using
a HC-05 device and followed the instructions in
As I understand , hciconifg and hcitools will be the basic Bluez test utils
First , make sure your HC-05 module can run with hciconfig
hciconfig -a to see what's output
2014-05-15 1:57 GMT+08:00 Pedro Gonzalez perigon...@gmail.com:
Hi there!
Newbie here ... sorry if too basic or already