Hi Robert,
Here are the comments from our Android guy:
I’ve tried running the script using bootcmd in uEnv.txt, however I cannot
run the script as u-boot does not get to the stage where it reads uEnv.txt.
Do you have any other suggestions for running the script?
On Wednesday, 26 February
On Fri, Feb 28, 2014 at 6:54 AM, lee.s...@bibby-scientific.com wrote:
Hi Robert,
Here are the comments from our Android guy:
I've tried running the script using bootcmd in uEnv.txt, however I cannot
run the script as u-boot does not get to the stage where it reads uEnv.txt.
Do you have
I can now confirm that my PCB supplier has now successfully fitted
connectors P8, P8 and I have taken delivery of my first-off sample.
Gerald, are you able to point me to some instructions on how I get my
virgin beagleboardblack up and running?
I have tried using an SD card with a known good
Well. Uh. I have no idea what your design looks like. But, the code you are
using looks for the EEPROM. Do you have one? If you do. is it programmed?
Gerald
On Wed, Feb 26, 2014 at 9:25 AM, lee.s...@bibby-scientific.com wrote:
I can now confirm that my PCB supplier has now successfully
On Wed, Feb 26, 2014 at 9:25 AM, lee.s...@bibby-scientific.com wrote:
I can now confirm that my PCB supplier has now successfully fitted
connectors P8, P8 and I have taken delivery of my first-off sample.
Gerald, are you able to point me to some instructions on how I get my
virgin
My design is a cut-down version of the BBB without HDMI IC fitted and
without eMMC IC fitted.
I want to get my new BBB booting off the SD card. Is it essential to have
the eMMC IC fitted or can the system be made to run without eMMC?
On Wednesday, 26 February 2014 15:45:18 UTC, Gerald wrote:
My design is a cut down version of BBB. The HDMI IC is not fitted and the
eMMC is not fitted.
Will the BBB boot from SD card without the eMMC IC fitted? Or is the eMMC
essential to the operation even when booting from Sd card?
On Wednesday, 26 February 2014 15:45:18 UTC, Gerald wrote:
Did you look at the System Reference Manual? Yes, it can boot from the SD
if you remove the eMMC.
Gerald
On Wed, Feb 26, 2014 at 10:15 AM, lee.s...@bibby-scientific.com wrote:
My design is a cut down version of BBB. The HDMI IC is not fitted and the
eMMC is not fitted.
Will the BBB boot
On Wed, Feb 26, 2014 at 10:15 AM, lee.s...@bibby-scientific.com wrote:
My design is a cut down version of BBB. The HDMI IC is not fitted and the
eMMC is not fitted.
Will the BBB boot from SD card without the eMMC IC fitted? Or is the eMMC
essential to the operation even when booting from
Thank you very much, I'll check that out.
On Wednesday, 26 February 2014 16:35:08 UTC, RobertCNelson wrote:
On Wed, Feb 26, 2014 at 10:15 AM,
lee@bibby-scientific.comjavascript:
wrote:
My design is a cut down version of BBB. The HDMI IC is not fitted and
the
eMMC is not
Thank you for the speedy response Gerald.
The PCB files used were those contained in Beaglebone_blackrevB4_MFG.zip
Is it likely the holes were deliberately under-sized to the datasheet to
give the tight fit you mention.
I am yet to see the problem physically for myself. The PCB supplier is
11 matches
Mail list logo
