Hi,
Could you share how?
Thanks
On Thursday, February 27, 2014 at 2:39:34 AM UTC+2, paccer wrote:
>
> Strangely, I've been unable to make touchscreen work with "andrews jb" on
> 4D systems 4DCAPE_70T
> I've tried with the prebuilt image, and also tried building from source,
> using the
>
> Hi Andrew,
>
Its great work!! . I have an issue with the pre-built
images with the custom board(duplication of BBB), while booting the system
hangs at andriod boot image, i have the logcat
"http://pastebin.com/ZVhQW3CC; . I cannot find which one is causing the
device to
Hi Daniel,
Did you ever resolve this issue? I am using the latest BBBAndroid image
and my BBB is not being recognized via ADB miniusb. If I use an older
image with Kernel 3.2 support I can adb shell into the BBB successfully.
Thanks!
On Friday, February 28, 2014 at 7:28:09 PM UTC-5, Daniel
I've downloaded the image and using DD I have applied in my microSD.
After DD finished, my microSD mounted 3 partitions.
I've put it my BeagleBone Black but the android did not start (even with
the boot button pressed).
I don't know what was wrong.
Em segunda-feira, 17 de junho de 2013
Andrew,
Thank you. I finally got both key mapping and navigation bar issue resolve.
Cheers
Mahendra
On Monday, September 15, 2014 10:43:59 AM UTC-4, Andrew Henderson wrote:
Since I answered this over on the 4DSystems forums, I figured that I
should link it here for everyone's reference:
Since I answered this over on the 4DSystems forums, I figured that I should
link it here for everyone's reference:
I have installed Andrew's Android build on a BBB with a 4D 4.3 display.
Most of it is working well.
Has anyone succeeded getting keys mapped to Home, Menu, Back and Search?
Thanks
Mahen
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are
I followed the steps recommended in the link
http://icculus.org/~hendersa/android/ .The BBB is booting through HDMI
properly. My requirement is to boot on a new LCD SH480272T-006-I13Q with
the datasheet link as
Hello Polash. I received your mail to me this morning on this topic. Keep
in mind that I have about four to five people mailing me data sheets EVERY
MORNING asking me how to get this or that working with the BBB, so I'm
going to give you the quick overview and post it here so perhaps others
I'm using a 4GB SD card. I tried to delete the 4th partition with no
success.
Then I did again the full procedure from the beginning (a second time) and
surprisingly now it works !
I probably missed (the first 2 times) one step in the procedure ...
Thanks a lot for your support.
Le mercredi
I've been looking into the issue some more (sorry for the delay), and I've
still not been successful on getting the touch screen to work with 3.8.
I am getting touch interrupts, but i don't appear to be able to calibrate
myself out of the problem.. (?)
After touching the screen the first time,
Hi,
Check out this thread:
http://beagleboard.org/Community/Forums/?place=msg%2Fbeagleboard%2FnwS91gX6dtk%2FKzn5LeytsCUJ
I had the same issue with the 4DCAPE-70T.
I replaced the delay to 15 ms and the issue went away but it still
feels like a hack.
On Sun, Mar 16, 2014 at 4:11 PM, paccer
Have you tried Adb via TCP/IP ?
That worked for me with Andrew Henderson's pre-built image.
-Suzanne
Sent from my iPhone
On Feb 28, 2014, at 7:28 PM, Daniel Delgado Terán warm...@gmail.com wrote:
I'm currently having a lot of problems here. If I use Andrew's pre-built
image I get support
On Saturday, March 1, 2014 5:58:09 AM UTC+5:30, Daniel Delgado Terán wrote:
I'm currently having a lot of problems here. If I use Andrew's pre-built
image I get support of the LCD3 Rev. A2 with the BBB Rev. A6A but no
support to miniUSB+ADB, the device is not even recognized as an actual
Any chances you can please share that image?
On Monday, October 7, 2013 3:05:10 AM UTC-5, david.m...@gmail.com wrote:
I've now built the kernel with g_ffs built directly into the kernel and
now adb works!
Am Mittwoch, 2. Oktober 2013 05:44:38 UTC+2 schrieb Nikolay Elenkov:
On Wed, Oct 2,
I'm currently having a lot of problems here. If I use Andrew's pre-built
image I get support of the LCD3 Rev. A2 with the BBB Rev. A6A but no
support to miniUSB+ADB, the device is not even recognized as an actual
device when I connect it (not even with a missing driver, it's just a ghost
BBB does not ship with HW support for OTG.
Gerald
On Fri, Feb 28, 2014 at 6:28 PM, Daniel Delgado Terán warm...@gmail.comwrote:
I'm currently having a lot of problems here. If I use Andrew's pre-built
image I get support of the LCD3 Rev. A2 with the BBB Rev. A6A but no
support to
Strangely, I've been unable to make touchscreen work with andrews jb on
4D systems 4DCAPE_70T
I've tried with the prebuilt image, and also tried building from source,
using the instructions on Andrews webpage, using latest 3.8.x kernel
sources.
Touch screen works fine on
On Thursday, February 27, 2014 6:09:34 AM UTC+5:30, paccer wrote:
Strangely, I've been unable to make touchscreen work with andrews jb on
4D systems 4DCAPE_70T
I've tried with the prebuilt image, and also tried building from source,
using the instructions on Andrews webpage, using latest
Hi,
I have Andrew Henderson's image running with LCD4 cape but now I am trying
to communicate with the serial ports.
I have tried modifying the init.rc to change the UART permissions as
recommended in another post but that did not help.
Also, I cannot access via abd. Any suggestions?
Do I
I have just tested with hdmi connection (so no LCD7) and it's the same - no
mouse.
On Monday, February 3, 2014 10:45:31 AM UTC+1, pru@gmail.com wrote:
On Sunday, July 7, 2013 4:09:26 AM UTC+2, Andrew Henderson wrote:
[...]
Try testing it out with a USB mouse and making sure that it
On Sunday, July 7, 2013 4:09:26 AM UTC+2, Andrew Henderson wrote:
[...]
Try testing it out with a USB mouse and making sure that it looks and acts
like what you would expect. If you move the mouse and don't see the
cursor, then let us know. [...]
Andrew
Hi Andrew,
I run the
Hello Rich,
I am also trying to boot BBB with 4DCAPE-43T.
1. Can you please share your uEnv.txt?
2. Did you used a pre-built image from
TI-Andriodhttp://processors.wiki.ti.com/index.php/TI-Android-JB-4.2.2-DevKit-4.1.1_DeveloperGuide
or
something different?
3. Did you boot off
Rich
I got Andrew Henderson JB image working,
Thanks
On Thu, Jan 30, 2014 at 11:54 AM, Mahendra Gunawardena
mahengunaward...@gmail.com wrote:
Hello Rich,
I am also trying to boot BBB with 4DCAPE-43T.
1. Can you please share your uEnv.txt?
2. Did you used a pre-built image from
I've now built the kernel with g_ffs built directly into the kernel and now
adb works!
Am Mittwoch, 2. Oktober 2013 05:44:38 UTC+2 schrieb Nikolay Elenkov:
On Wed, Oct 2, 2013 at 5:24 AM, david.m...@gmail.com javascript:
wrote:
I'm also having problems starting adbd with kernel 3.8 and I
On Wed, Oct 2, 2013 at 5:24 AM, david.massha...@gmail.com wrote:
I'm also having problems starting adbd with kernel 3.8 and I think I found
the problem. I tried to load the kernel module using this command:
insmod /system/lib/modules/3.8.13-bone28/kernel/drivers/usb/gadget/g_ffs.ko
26 matches
Mail list logo
