d@googlegroups.com]
> *On Behalf Of *Peter Lange
> *Sent:* June-03-21 2:51 PM
> *To:* beagleboard@googlegroups.com
> *Subject:* Re: [beagleboard] Re: BeagleBone Black (C) USB based touch not
> working
>
>
>
> It was the Beaglebone USB connector.
>
> Touch is currently not calib
03-21 2:51 PM
To: beagleboard@googlegroups.com
Subject: Re: [beagleboard] Re: BeagleBone Black (C) USB based touch not working
It was the Beaglebone USB connector.
Touch is currently not calibrated.
But on my WIN10 PC it works fine. Can recommend the display.
John Dammeyer schrieb am Do
eagleboard@googlegroups.com
Subject: Re: [beagleboard] Re: BeagleBone Black (C) USB based touch not working
It was the Beaglebone USB connector.
Touch is currently not calibrated.
But on my WIN10 PC it works fine. Can recommend the display.
John Dammeyer schrieb am Do., 3. Juni 2021, 22:27:
So it was t
response on that display?
>
>
>
> *From:* beagleboard@googlegroups.com [mailto:beagleboard@googlegroups.com]
> *On Behalf Of *Peter Lange
> *Sent:* June-03-21 12:28 PM
> *To:* beagleboard@googlegroups.com
> *Subject:* Re: [beagleboard] Re: BeagleBone Black (C) USB based touch not
>
] Re: BeagleBone Black (C) USB based touch not working
Hi Robert,
it's solved. Hardware, the USB connector.
Was able to solder, now it works fine.
Sometimes there was a second entry with lsusb. Then I found out, it's the
connector, with a little pressure it worked.
Then microscope, solder iron
Hi Robert,
it's solved. Hardware, the USB connector.
Was able to solder, now it works fine.
Sometimes there was a second entry with lsusb. Then I found out, it's the
connector, with a little pressure it worked.
Then microscope, solder iron
I spent 2 days and nights on that
But I learned a
Hi Robert,
I found it. Need to calibrate now.
More later
Kasimir
Robert Nelson schrieb am Do., 3. Juni 2021, 15:37:
> >
> > The project requires the pru units, that works fine.
> > Touch is eating up my time. And I expect it makes no sense to order
> other touch displays and the status is
>
> The project requires the pru units, that works fine.
> Touch is eating up my time. And I expect it makes no sense to order other
> touch displays and the status is still the same.
> USB based touch was expected as "best and simple" solution. I need SPI and
> GPIO for surrounding hardware.
Hi Dennis,
yes, the board looks similar. Of course I powered with a separate power
supply :-)
That's my board:
https://www.ebay.de/itm/174109565997
Works fine on Windows PC, so it's not defective.
I like it, brilliant colors, wide angle but Beaglebone Black is
ignoring the touch.
I'm using
On Sun, 30 May 2021 16:13:00 -0700 (PDT), in
gmane.comp.hardware.beagleboard.user Kasimir
wrote:
>But I'm hanging with touch.
>Installed is: Linux beaglebone 4.19.94-ti-r64 #1buster SMP PREEMPT Fri May
>21 23:57:28 UTC 2021 armv7l GNU/Linux
>Plan is to write directly into the framebuffer, no X
10 matches
Mail list logo
