Nice ..
Its not diffcult to config an NM-16ESW .. typically like any other switch .
Hope u are aware of its limitations etc as well . Though u r simulating this
as c37xx switch .. but dont expect 100 % same behaviour .. this is just a NM
sitting on ur ISR and behaving like a switch .
So there
Hello,
I've started using Dynamips for some of the lab practice exercises and
have couple of quick questions:
1. Does anyone know if/how I can save the routers/configs working with
Dynamips?
2. How to configure the TermServ to work with Dynamips?
Thanks.
On Wed, Dec 2, 2009 at 15:58, Jonathan Charles jonv...@gmail.com wrote:
Interesting note, in the past 35 days, the number of RS CCIEs has
dropped by 52 so, either someone is hunting CCIEs or people are
letting their certs expire...
Probably both. Cisco has been hunting rent-a-cert CCIEs
Yeah, but 50 seems like a lot in 30 days
And we have heard nothing of anyone passing the V4 RS lab...
Jonathan
On Wed, Dec 2, 2009 at 10:02 AM, Marko Milivojevic mar...@ipexpert.com wrote:
On Wed, Dec 2, 2009 at 15:58, Jonathan Charles jonv...@gmail.com wrote:
Interesting note, in the
Not that I know of I am sure Cisco knows, they just don't publish it...
Jonathan
On Wed, Dec 2, 2009 at 10:06 AM, Paul Kruger pauld.kru...@gmail.com wrote:
Yeah, I agree. I think crap loads of people got their number those last few
weeks before the big change.
BTW Are there any stats
Hehehe,
They should make a movie about this ...
The CCIE killer ... someone is hunting down CCIE's
I don't know what the exact reason is ... but it's indeed very strange ...
--
Regards,
Iwan Hoogendoorn
CCIE #13084 (RS / Security / SP)
Sr. Support Engineer – IPexpert, Inc.
URL:
Hi
I have configured R3 to filter loopback 1. but I still see R1s loopback1 in R3s
routing tabel.
Please see my config below.
R3
R3#sho ip int brief
Interface IP-Address OK? Method Status
Protocol
FastEthernet0/0 54.1.1.4 YES
On Wed, Dec 2, 2009 at 18:35, Ahmed Haji Munye ahmhaj...@yahoo.se wrote:
I have configured R3 to filter loopback 1. but I still see R1s loopback1 in
R3s routing tabel.
[...]
!
router bgp 54
no synchronization
bgp log-neighbor-changes
network 4.1.1.0 mask 255.255.255.0
neighbor
Haha...sorry. An explanation would be nice :)
Basically, for each worksheet, you need to identify the spanning-tree root
bridge for the topology and then calculate the subsequent root ports,
designated ports, and blocked ports for each link and bridge. I usually use
R, D, and X respectively
Hi Vinh,
It's much nicer to work with GNS3 though
Cheers!
Antonio Dee
CCIE #25609 (RS)
Date: Wed, 2 Dec 2009 12:35:26 -0500
From: vinh.c...@gdc4s.com
To: brandon.j.carr...@gmail.com
CC: ccie_rs@onlinestudylist.com
Subject: Re: [OSL | CCIE_RS] Dynamips
Brandon, I am simply using
btw ... there is a new GNS3 release (candidate):
http://www.gns3.net/news
Paulo Roque
Hi Vinh,
It's much nicer to work with GNS3 though
Cheers!
Antonio Dee
CCIE #25609 (RS)
Date: Wed, 2 Dec 2009 12:35:26 -0500
From: vinh.c...@gdc4s.com
To:
On Wed, Dec 2, 2009 at 8:59 PM, Jean-Marie Ngok jm.n...@yahoo.fr wrote:
I have a problem with a multicast configuration. I am working with cisco 360
learning program (Advanced Workshop II) I need to understand why the mentor
guide configure a static RP without putting the RP (Loopback 104 on
Hi
I have followed the example as shown on the link that you sent me. But now R3
does filter all R1s Loopbacks. I have only configured R3 to filter R1s Loopback
2. Please see below!
router bgp 54
no synchronization
bgp log-neighbor-changes
network 4.1.1.0 mask 255.255.255.0
neighbor
You're being caught by an implicit deny at the end of your prefix-list. Add
a permit 0.0.0.0/0 le 32 at the end and you should be good to go.
cheers,
Dale
On Thu, Dec 3, 2009 at 4:37 PM, Ahmed Haji Munye ahmhaj...@yahoo.se wrote:
Hi
I have followed the example as shown on the link that you
14 matches
Mail list logo