At the risk of upsetting people who are perhaps hoping for a bargain can I
send a link to this thread..
http://www.vcfed.org/forum/showthread.php?76560-Basement-full-of-DEC-parts-P
DP-5-PDP-8-DEC-55-and-more/page2
I notice that there are card desks and an 029 that might interest folks. He
Peter,
I seem to have been receiving various adds for "optimised SMTP" delivery but
not sure if any relate to SparkPost.
The version of you address with "at" rather than "@" is visible in a couple
of places
Dave
> -Original Message-
> From: cctalk On Behalf Of Peter Coghlan
> via
Nigel,
Have you thought about using the MFM emulator from
https://www.pdp8.net/mfm/mfm.shtml
I don't know how well it works with MicroVax...
Dave
> -Original Message-
> From: cctalk On Behalf Of Nigel Johnson
> via cctalk
> Sent: 16 August 2020 16:25
> To: cctalk@classiccmp.org
>
It says "fluxgate magnetometer" on the case so its for measuring the earths
magnetic field, or other magnetic fields.
Dave
> -Original Message-
> From: cctalk On Behalf Of Adrian Stoness
> via cctalk
> Sent: 08 August 2020 00:08
> To: General Discussion: On-Topic and Off-Topic Posts
>
Rude words. I would have taken the Vision Master
Dave
> -Original Message-
> From: cctalk On Behalf Of Antonio Carlini
> via cctalk
> Sent: 31 July 2020 11:36
> To: cct...@classiccmp.org
> Subject: Re: Monitors FTGH
>
> On 29/03/2020 11:27, Antonio Carlini via cctech wrote:
> > The
Al,
I would say "mostly". There are still corners that have not totally succumbed.
comp.sys.ibm.ps2.hardware
has the odd interesting posts, as does the open VMS group
Dave
> -Original Message-
> From: cctalk On Behalf Of Al Kossow via
> cctalk
> Sent: 29 July 2020 21:21
> To:
>
> Do the existing Alpha PAKs work on VSI's latest release? If a VSI release
> recognises a PAK with PRODUCER=DEC then presumably that would be a
> problem? Although since VSI are covering that same area with hobbyist
> licences then that's really a non-issue. I suspect that HPe have other fish
> -Original Message-
> From: cctalk On Behalf Of Liam Proven via
> cctalk
> Sent: 24 July 2020 12:38
> To: General Discussion: On-Topic and Off-Topic Posts
>
> Subject: Re: Any interest in "newer" hardware, software?
>
> On Fri, 24 Jul 2020 at 08:36, Boris Gimbarzevsky via cctalk
>
Dwight,
Well oddly all the "PC" variants so the XT/370, AT/370, P390 & P390/E meet
that definition, in that they are 370 or 390 class CPUs that use the host PC
to handle the IO...
So the host PC is in effect the IO processor...
Dave
> -Original Message-
> From: cctalk On Behalf Of
Antonio,
Happy to take one. Can collect. Be a nice companion for VAX and IBM P390. Keep
hearing of Alphas but nothing has appeared.
Dave
> -Original Message-
> From: cctalk On Behalf Of Antonio Carlini
> via cctalk
> Sent: 21 July 2020 20:58
> To: General Discussion: On-Topic and
I have several and I have used them on several machines, so IBM 3174 screen
controller, IBM Pentium Server and Atari ST but not DEC, with the FlashFloppy
software mentioned elsewhere.
I programmed the Gotek on a Windows machine but there are instructions for
Linux.
It appears it supports RX50
> -Original Message-
> From: Ali
> Sent: 14 July 2020 20:22
> To: 'Dave Wade' ; 'General Discussion: On-Topic
> and Off-Topic Posts'
> Subject: RE: Compaq Smart Array 3200 Controller as a SCSI Controller
>
> > Ali,
> > Its been a long time, but I think the answer is no. A tape is not a
Ali,
Its been a long time, but I think the answer is no. A tape is not a disk and
uses a different SCSI command set to a disk. For example you can't rewind a
disk.
I found a SmartArray 3200 manual here:-
http://index-of.es/Tutorials/Proliant%201600/SmartArray3200.pdf
and in the Q it says :-
Q.
> -Original Message-
> From: cctalk On Behalf Of Liam Proven via
> cctalk
> Sent: 07 July 2020 17:52
> To: General Discussion: On-Topic and Off-Topic Posts
>
> Subject: Re: About to dump a bunch of Compaq SCSI disk caddies (and disks)
>
> On Tue, 7 Jul 2020 at 18:14, Alessandro
> -Original Message-
> From: Ethan Dicks
> Sent: 19 June 2020 15:44
> To: Dave Wade ; General Discussion: On-Topic
> and Off-Topic Posts
> Subject: Re: Synchronous serial Re: E-Mail Formats RE: Future of
> cctalk/cctech
>
> On Fri, Jun 19, 2020 at 4:26 AM Da
> -Original Message-
> From: cctalk On Behalf Of Peter Coghlan
> via cctalk
> Sent: 18 June 2020 23:11
> To: General Discussion: On-Topic and Off-Topic Posts
>
> Subject: Re: Synchronous serial Re: E-Mail Formats RE: Future of
> cctalk/cctech
>
> Ethan Dicks wrote:
> > On Thu, Jun 18,
> -Original Message-
> From: cctalk On Behalf Of Peter Corlett
via
> cctalk
> Sent: 18 June 2020 09:38
> To: General Discussion: On-Topic and Off-Topic Posts
>
> Subject: Re: Amiga Vendors?
>
> On Wed, Jun 17, 2020 at 05:39:44PM -0400, Ethan O'Toole via cctalk wrote:
> [...]
> > The
> -Original Message-
> From: cctalk On Behalf Of Peter Coghlan
> via cctalk
> Sent: 18 June 2020 08:22
> To: General Discussion: On-Topic and Off-Topic Posts
>
> Subject: RE: Future of cctalk/cctech
>
> ED SHARPE wrote:
> > Use modern email program that sees expanded char. Sets and
>
> -Original Message-
> From: cctalk On Behalf Of Al Kossow via
> cctalk
> Sent: 17 June 2020 13:55
> To: cctalk@classiccmp.org
> Subject: Re: Future of cctalk/cctech
>
> > I wonder what you don't like about "groups.io" Its pretty much a pure
> mailing list?
>
> Like all of the webby
Folks,
I think I now have too many 3174 controllers. I have
1 x Rack Mount - Token Ring Card + MFM Disk Emulator
1 x Large Tabletop - Token Card
1 x Large Tabletop - Ethernet Card <=> I am keeping this.
1 x Small Tabletop - Token Ring card but won't run TCPIP code.
If anyone
> -Original Message-
> From: cctalk On Behalf Of Tor Arntsen via
> cctalk
> Sent: 17 June 2020 09:50
> To: General Discussion: On-Topic and Off-Topic Posts
>
> Subject: Re: Future of cctalk/cctech
>
> > > > There is also groups.io, and it has some very nice features
> > > > compared to
> -Original Message-
> From: cctalk On Behalf Of Jon Elson via
> cctalk
> Sent: 17 June 2020 01:57
> To: Zane Healy ; gene...@ezwind.net;
> discuss...@ezwind.net:On-Topic and Off-Topic Posts
>
> Subject: Re: Future of cctalk/cctech
>
> On 06/16/2020 05:45 PM, Zane Healy via cctalk
> -Original Message-
> From: cctalk On Behalf Of Joshua Rice via
> cctalk
> Sent: 15 June 2020 11:02
> To: Chuck Guzis ; General Discussion: On-Topic and Off-
> Topic Posts
> Subject: Re: : Unknown Intel blinkenlight panel circa 1973
>
> Somehow it seems the thread got fragmented. I
> -Original Message-
> From: cctalk On Behalf Of Chuck Guzis via
> cctalk
> Sent: 15 June 2020 06:33
> To: dwight via cctalk
> Subject: Re: Unknown Intel blinkenlight panel circa 1973
>
> On 6/14/20 8:41 PM, dwight via cctalk wrote:
> > I can see why I was having problems. The picture
Peter,
This is just generic advice based on recent experience. I would replace all
electrolytic caps. I had some test pretty good, but PSU worked after I replaced
them. Also check all the rectifier diodes as well, and I have had an
opto-isolator fail.
Dave
> -Original Message-
> From:
Phil (and the rest of you)
You may find this interesting:-
http://vm.marist.edu/~vmshare/browse.cgi?fn=HISTORY=MEMO=cp67#hit
note that you won't find VMSHARE articles via google. The site isn't indexed
anywhere else.
Dave
> -Original Message-
> From: cctalk On Behalf Of Phil Budne
> -Original Message-
> From: cctalk On Behalf Of Bill Gunshannon
> via cctalk
> Sent: 29 May 2020 23:09
> To: cctalk@classiccmp.org
> Subject: Re: Microsoft open sources GWBASIC
>
> On 5/29/20 5:24 PM, Jim Brain via cctalk wrote:
> >
> > At the risk of fanning the language fire, C seems
> -Original Message-
> From: cctalk On Behalf Of Chris Hanson via
> cctalk
> Sent: 28 May 2020 04:54
> To: General Discussion: On-Topic and Off-Topic Posts
>
> Subject: Re: Living Computer Museum
>
> On May 27, 2020, at 8:48 PM, Jecel Assumpcao Jr
> wrote:
> >
> > I would think that if
I think some on the VCFED forums were looking for one of these.
Dave
> -Original Message-
> From: cctalk On Behalf Of Chris Elmquist
> via cctalk
> Sent: 26 May 2020 18:22
> To: cctalk@classiccmp.org
> Subject: IBM 3178 keyboards available in MN
>
> A friend has unearthed approximately
> -Original Message-
> From: cctalk On Behalf Of Peter Coghlan
> via cctalk
> Sent: 25 May 2020 08:10
> To: General Discussion: On-Topic and Off-Topic Posts
>
> Subject: Re: history is hard
>
> On Sun, 24 May 2020 at 19:24:31 -0400, Bill Gunshannon wrote:
> >On 5/24/20 5:30 PM, Peter
> -Original Message-
> From: cctalk On Behalf Of Bill Gunshannon
> via cctalk
> Sent: 25 May 2020 00:25
> To: cctalk@classiccmp.org
> Subject: Re: history is hard
>
> On 5/24/20 5:30 PM, Peter Coghlan via cctalk wrote:
> >
> >
> > CP/67 or something like that maybe? I don't think there
Rob,
I have what is laughingly labelled as a "Field Engineering Library - M250
Service Manual" but its actually almost totally devoid of any technical
information.
Not sure what the difference between the M250 and M250E is but looking at the
pocket guide they are very similar.
In fact the
> -Original Message-
> From: cctalk On Behalf Of Tony Duell via
> cctalk
> Sent: 24 May 2020 10:28
> To: r...@jarratt.me.uk
> Cc: General Discussion: On-Topic and Off-Topic Posts
>
> Subject: Re: Alternative Monitor for VAXmate
>
> On Sun, May 24, 2020 at 9:23 AM Rob Jarratt
>
> I have wondered about RGB, the I/O board does output an RGB signal along
> with Intensity, Horizontal Sync and Vertical Sync, but I don't know if I
could
> feed that to a monitor that accepts RGB signals as I don't know what the
> voltage levels should be. I have a VR241 which seems to have
Mattis.
If you can't get a copy, the guys at Cambridge will usually scan it for you for
a donation. Not sure if that’s possible at present. They don't receive any
government funding and do need the cash
Dave
> -Original Message-
> From: cctalk On Behalf Of Mattis Lind via
> cctalk
>
> -Original Message-
> From: cctalk On Behalf Of nico de jong via
> cctalk
> Sent: 17 April 2020 08:40
> To: cctalk@classiccmp.org
> Subject: Re: ICL1501 Cobol manual available
>
> On 2020-04-17 09:12, ben via cctalk wrote:
> > On 4/17/2020 12:19 AM, Tomasz Rola via cctalk wrote:
> >> On
I have been using PGPLOT but I guess you are aware of that.
https://www.astro.caltech.edu/~tjp/pgplot/
I also wonder if you might be interested in
https://github.com/rricharz/Tek4010
what I was looking for was a Calcomp Basic Plotting calls to HPGL as most of my
plotters are HPLG and would
On 3/10/2020 8:48 AM, Bill Gunshannon via cctalk wrote:
> > On 3/10/20 2:31 AM, Dave Wade via cctalk wrote:
> >>
> >>
> >>> -Original Message-
> >>> From: cctalk On Behalf Of Rod
> >>> Smallwood via cctalk
> >>> Sent: 1
> -Original Message-
> From: cctalk On Behalf Of Rod Smallwood
> via cctalk
> Sent: 10 March 2020 04:14
> To: Fred Cisin via cctalk
> Subject: Re: HPE OpenVMS Hobbyist license program is closing
>
> On 10/03/2020 02:19, Fred Cisin via cctalk wrote:
>
> > On Tue, 10 Mar 2020, Doug
For those interested there are several 360/67 pictures here...
http://history.cs.ncl.ac.uk/anniversaries/40th/images/ibm360_672/index.html
and one of the 360/40 console at MOTAT, Auckland, New Zealand here:-
https://1drv.ms/u/s!Ag4BJfE5B3onlq0VBQd65MgE8EH67g?e=1DiSyI
Dave
> -Original
> To: cctalk@classiccmp.org
> Subject: Re: Old Nokia/alfaskop 3270 terminal
>
>
>
> On 1/11/20 5:03 AM, Dave Wade via cctalk wrote:
>
> > They have 122-key PC style keyboards with a large plug. Not sure if they are
> AT or XT style. A parallel printer port. Inside there is a M68
> Subject: Re: Old Nokia/alfaskop 3270 terminal
>
>
>
> On 1/11/20 5:03 AM, Dave Wade via cctalk wrote:
>
> > They have 122-key PC style keyboards with a large plug. Not sure if they are
> AT or XT style. A parallel printer port. Inside there is a M68000P12 CPU.
&g
, but my understanding is that those
also booted from the communication processor, the 9101.
/Mattis
Den lör 11 jan. 2020 kl 00:13 skrev Dave Wade via cctalk mailto:cctalk@classiccmp.org> >:
Folks,
Can any one remember how to get an AlfaSkop terminal into local setup mode>
Folks,
Can any one remember how to get an AlfaSkop terminal into local setup mode>
Dave Wade
G4UGM & EA7KAE
I wonder if there is any interest here...
-Original Message-
From: greenkeys-boun...@mailman.qth.net On
Behalf Of John Lawson
Sent: 10 December 2019 17:41
To: greenk...@mailman.qth.net
Subject: [GreenKeys] DURA Selectric ASR terminals free
Greetings List!
I have a couple of "DURA"
> -Original Message-
> From: cctalk On Behalf Of Bill Gunshannon
> via cctalk
> Sent: 15 December 2019 17:31
> To: cctalk@classiccmp.org
> Subject: Re: Is IBM RPG classic?
>
> On 12/15/19 11:40 AM, Guy N. via cctalk wrote:
> > Is it classic enough to ask about on this list?
>
> Can't
In case any one is interested..
https://www.facebook.com/groups/retrocomputers/permalink/3042809669082227/
Dave Wade
G4UGM & EA7KAE
I believe that Edison invented the filament bulb with a Tungsten Filament, but
Joseph Swan's carbon filament bulb pre-dated this.
However Edison was doing so well in his court case, than rather than wait for
the result, he simply bought out Swan thus ending the debate
Dave
G4UGM
ps. what
Matt,
Would combined postage be cheaper? I would like a set too but the cost seemed
horrid
Dave
> -Original Message-
> From: cctalk On Behalf Of Matt Burke via
> cctalk
> Sent: 23 November 2019 10:30
> To: Guy Dunphy via cctalk
> Subject: Re: Disposing: IBM Microchannel cards, for
> -Original Message-
> From: cctalk On Behalf Of Chuck Guzis via
> cctalk
> Sent: 19 November 2019 03:45
> To: Will Cooke via cctalk
> Subject: Re: 3270 controller simulation
>
> On 11/18/19 5:36 PM, Will Cooke via cctalk wrote:
>
> > I find it interesting that one of the few remaining
> -Original Message-
> From: cctalk On Behalf Of Grant Taylor via
> cctalk
> Sent: 18 November 2019 21:32
> To: cctalk@classiccmp.org
> Subject: Re: 3270 controller simulation
>
> On 11/18/19 1:37 PM, Dave Wade via cctalk wrote:
> > One thing which comp
Grant,
One thing which complicates things is that we have (roughly) layered protocols
in place between the 3174 and the host.
So at the physical level we have channel attached, SDLC, Token Ring and bi-sync.
Above that we have the channel protocols, HDLC/SDLC and bi-sync polling.
Then we may
Chris,
I have several Spartan boards, no Zync...
... but would be interested to see how it works...
Dave
> -Original Message-
> From: cctalk On Behalf Of cw via cctalk
> Sent: 18 November 2019 17:43
> To: cctalk@classiccmp.org
> Subject: FPGA based 3174 replacement
>
> As it happens I
> -Original Message-
> From: cctalk On Behalf Of Grant Taylor via
> cctalk
> Sent: 18 November 2019 17:32
> To: cctalk@classiccmp.org
> Subject: Re: 3270 controller simulation
>
> On 11/18/19 10:06 AM, Dave Wade via cctalk wrote:
> > I started with a token r
> -Original Message-
> From: cctalk On Behalf Of Grant Taylor via
> cctalk
> Sent: 18 November 2019 17:16
> To: cctalk@classiccmp.org
> Subject: Re: 3270 controller simulation
>
> On 11/18/19 9:45 AM, Al Kossow via cctalk wrote:
> > …people have gone Cisco to 3174 to get coax
> -Original Message-
> From: cctalk On Behalf Of Grant Taylor via
> cctalk
> Sent: 18 November 2019 17:07
> To: cctalk@classiccmp.org
> Subject: Re: 3270 controller simulation
>
> On 11/18/19 9:42 AM, Dave Wade via cctalk wrote:
> > Yes the second. So it
> -Original Message-
> From: cctalk On Behalf Of Al Kossow via
> cctalk
> Sent: 18 November 2019 16:45
> To: cctalk@classiccmp.org
> Subject: Re: 3270 controller simulation
>
>
>
> On 11/18/19 8:22 AM, Grant Taylor via cctalk wrote:
>
> > I believe the *Remote* 3174 (et al.) is one of
> -Original Message-
> From: cctalk On Behalf Of Grant Taylor via
> cctalk
> Sent: 18 November 2019 16:22
> To: cctalk@classiccmp.org
> Subject: Re: 3270 controller simulation
>
> On 11/18/19 2:56 AM, Dave Wade via cctalk wrote:
> > Whilst not what yo
> -Original Message-
> From: cctalk On Behalf Of Al Kossow via
> cctalk
> Sent: 18 November 2019 02:51
> To: cctalk@classiccmp.org
> Subject: Re: 3270 controller simulation
>
>
>
> On 11/17/19 4:32 PM, alan--- via cctalk wrote:
> >
> > Anyone aware of any effort to emulate 515x
Folks,
Any one got any interest in any dot-matrix printers. Got a Panasonic wide
carriage, DEC narrow carriage, and a Tandy DMP200..
Dave Wade
G4UGM & EA7KAE
I will answer Al offline
Dave
> -Original Message-
> From: cctalk On Behalf Of Al Kossow via
> cctalk
> Sent: 01 November 2019 22:36
> To: General Discussion: On-Topic and Off-Topic Posts
> Subject: Best email to reach a human at the centre for computing history
>
Al,
I think that’s for GDPR and returns only the data you have posted.
Dave
> -Original Message-
> From: cctalk On Behalf Of Al Kossow via
> cctalk
> Sent: 31 October 2019 16:39
> To: General Discussion: On-Topic and Off-Topic Posts
> Subject: getting your data from yahoo
>
> someone
Al,
I have archived several groups files, messages (as .eml) and images. Let me
know off list which you want.
Dave
G4UGM
> -Original Message-
> From: cctalk On Behalf Of Al Kossow via
> cctalk
> Sent: 31 October 2019 18:28
> To: cctalk@classiccmp.org
> Subject: Re: getting your data
> -Original Message-
> From: cctalk On Behalf Of William Donzelli
> via cctalk
> Sent: 30 October 2019 10:49
> To: allison via cctalk
> Subject: Re: 50 yrs. ago today
>
> > Funny thing was DECnet was in 1983 the largest world wide network
> > period.
>
> comma, ignoring SNA.
I am not
have been reasonably successful, after making a few mods, in backing up Yahoo
groups using a clone of "Yahoo Group Archiver" which broadly works (but see
below) and doesn't need any scraping tools.
I made a few tweaks concentrating on speed rather than documenting the code and
the current mess
I don't know much about plated wire store, but I do know it was used in the
Manchester University MU5 computer which pioneered heuristic pipelining.
There is some info here:-
http://homepages.inf.ed.ac.uk/cgi/rni/comp-arch.pl?Ibuff/mu5-ibu.html,Ibuff/
mu5-ibu-f.html,Ibuff/menu-mu5.html
Must be the USA PC World. In the UK they would have tried to sell you an
extended warranty as well which is really just an insurance policy
.. but the question is why PC World. Don't US universities have student
discount stores?
Dave
> -Original Message-
> From: cctalk On Behalf
Note:- This storey is a year old...
Dave
> -Original Message-
> From: cctalk On Behalf Of Jeffrey S. Worley
> via cctalk
> Sent: 07 October 2019 04:24
> To: cctalk@classiccmp.org
> Subject: Nuke Redmond!
>
> A fellow who was putting the air in "Microsoft Tire" (c) is going to prison.
>
> -Original Message-
> From: cctalk On Behalf Of Paul Koning via
> cctalk
> Sent: 03 October 2019 16:28
> To: Stefan Skoglund
> Cc: General Discussion: On-Topic and Off-Topic Posts
> Subject: Re: VAX + Spectre
>
>
>
> > On Oct 3, 2019, at 10:55 AM, Stefan Skoglund
> wrote:
> >
>
Much to my surprise, there are CAMAC Crates and memory cards on E-Bay. How you
would use this I don't know. When I worked at NERC we used them for many many
tasks.
We had a Honeywell L66 running GCOS3. We used these to emulate Honeywell
RNP707s. These were like 3780's so remote work terminals,
Jon,
Used lots of these back in the day. Where in the world is it, its big to
ship? Does it need a CAMAC memory card or a QBUS card?
Dave
> -Original Message-
> From: cctalk On Behalf Of Jon Elson via
> cctalk
> Sent: 01 October 2019 02:45
> To: gene...@ezwind.net;
Folks,
I have a couple of spare printers
1. Panasonic KX-P3626 wide carriage 24-pin dot matrix printer with
sheet and tractor feed. Free to anyone who wants it. If needed I can throw
in a box of music ruled fanfold paper.
Comes with some spare ribbons.
2. Amstrad DPM2000 narrow
Seen on the vintage forums - I hope I am not spoiling some ones bid
https://swicoauctions.com/online/26/item/43886
Dave Wade
G4UGM & EA7KAE
What are the opening times? I think I might manage a Sunday but don't arrive
at TXL until 10:55
Dave
> -Original Message-
> From: cctalk On Behalf Of Angelo Papenhoff
> via cctalk
> Sent: 30 August 2019 09:38
> To: cctalk@classiccmp.org
> Subject: VCF Berlin
>
> So many VCFs happening
Kevin,
As I am sure others will say, I believe that the problem with the "X" filter
caps is that the case becomes cracked and you get moisture ingress
Dave
> -Original Message-
> From: cctalk On Behalf Of Kevin Parker via
> cctalk
> Sent: 28 August 2019 23:51
> To: 'Marvin
> -Original Message-
> From: cctalk On Behalf Of Guy Dunphy via
> cctalk
> Sent: 28 August 2019 10:07
> To: Marvin Johnston ; General Discussion: On-Topic and
> Off-Topic Posts
> Subject: Re: TRS-80 Fireworks
>
> At 01:15 AM 28/08/2019 -0700, you wrote:
> >I'm just curious how many
> -Original Message-
> From: cctalk On Behalf Of John H. Reinhardt
> via cctalk
> Sent: 21 August 2019 05:29
> To: General Discussion: On-Topic and Off-Topic Posts ;
> Zane Healy
> Subject: Re: Current MANX location
>
> On 8/20/2019 11:26 PM, John H. Reinhardt via cctalk wrote:
> >
Charles,
I believe that TTL chips suffer from failure or detachment of the bonding
wire that runs from the die to the interconnect pin, which would result in a
floating pin as described.]
Not sure if environmental storage affects this as chips should be sealed...
I have also recently seen it
Pierre,
I would suggest that as you haven't seen one in ages, the price reflects the
rarity and the vendor is hoping for a rich collector to buy it.
I don't know off hand of anyone who uses one. I know that the 4341 at LCM uses
emulated DASD as does the ICL 2900 at TNMOC in the UK which I think
Yes, silly conversation with a department...
A. Can we have Google Earth installed. It would be really useful in our job
B. Yes if you pay, there is a fee for commercial use.
A. What if we won't use it for commercial purposes...
B. We won't install software for specifically for personal use,
> -Original Message-
> From: cctech On Behalf Of Mark J. Blair
via
> cctech
> Sent: 10 August 2019 18:03
> To: General Discussion: On-Topic Posts
> Subject: Re: Pertec Interface Cable Length
>
>
>
> > On Aug 10, 2019, at 1:57 AM, Dave Wade via cctech
> wrote:
> >
> >>
> >> I have
> -Original Message-
> From: cctech On Behalf Of Douglas Taylor
> via cctech
> Sent: 10 August 2019 05:06
> To: General Discussion: On-Topic Posts
> Subject: Pertec Interface Cable Length
>
> I have a question about cable length - any electrical engineers in the house?
Its
> -Original Message-
> From: cctalk On Behalf Of Grant Taylor via
> cctalk
> Sent: 06 August 2019 04:25
> To: cctalk@classiccmp.org
> Subject: Re: Alphaservers for free in Athabasca, Alberta
>
> On 8/5/19 8:40 PM, ben via cctalk wrote:
> > Now why could it not be a nice little PDP 11.
>
> -Original Message-
> From: cctalk On Behalf Of Jay West via
> cctalk
> Sent: 05 August 2019 18:38
> To: 'William Donzelli' ; 'General Discussion: On-Topic
> and Off-Topic Posts' ; 'Stan Sieler'
>
> Subject: RE: IBM Series/1
>
> I used to run a system at Anheuser-Busch in the late
> -Original Message-
> From: cctalk On Behalf Of ben via cctalk
> Sent: 02 August 2019 23:50
> To: cctalk@classiccmp.org
> Subject: Re: MULTIPROCESSING FOR THE IMPOVERISHED Part 1: a 6809
> Uniprocessor
>
> On 8/2/2019 11:15 AM, Liam Proven via cctalk wrote:
> > 1993 article on
> -Original Message-
> From: cctech On Behalf Of Adam
> Thornton via cctech
> Sent: 01 August 2019 04:31
> To: General Discussion: On-Topic Posts
> Subject: Re: A few VT-320 and keyboard questions
>
>
>
> > On Jul 31, 2019, at 7:25 PM, systems_glitch
> wrote:
> >
> > You can use a
> -Original Message-
> From: cctalk On Behalf Of Paul Koning via
> cctalk
> Sent: 24 July 2019 01:30
> To: Jon Elson ; General Discussion: On-Topic and
> Off-Topic Posts
> Subject: Re: Scanning question (Is destruction of old tech docs a moral
> crime?)
>
>
>
> > On Jul 21, 2019,
It might be worth trying to talk to the IBM Museum at Hursley.
https://slx-online.biz/hursley/contact_us.asp
Dave
> -Original Message-
> From: cctalk On Behalf Of Guy Dunphy via
> cctalk
> Sent: 23 July 2019 04:28
> To: Mattis Lind ; General Discussion: On-Topic and
> Off-Topic Posts
> -Original Message-
> From: cctalk On Behalf Of Antonio Carlini
> via cctalk
> Sent: 20 July 2019 18:20
> To: Bill Gunshannon via cctalk
> Subject: Re: dBase IV for VAX/VMS (was WordPerfect 5.1+ for VMS)
>
> On 20/07/2019 00:15, Bill Gunshannon via cctalk wrote:
> > On 7/19/19 4:04
> -Original Message-
> From: cctalk On Behalf Of Ethan Dicks via
> cctalk
> Sent: 18 July 2019 04:24
> To: Jason T ; General Discussion: On-Topic and Off-
> Topic Posts
> Subject: Re: WordPerfect 5.1+ for VMS
>
> On Wed, Jul 17, 2019 at 10:54 PM Jason T via cctalk
> wrote:
> > I have a
Bill,
Ask Peter about emulators. Pretty sure some one at the museum did an 803
emulator, (not in SIMH) but its been a while since I saw the machine running.
Dave
> -Original Message-
> From: cctalk On Behalf Of Bill Degnan via
> cctalk
> Sent: 13 July 2019 21:30
> To: General
As for expectations for Bill, my son made a similar journey , by bus, from
Oxford to Gatwick, so a bit of M40 then 75% of the M25 this morning. He allowed
2 hours extra and is cross because for once he arrived on schedule and had two
extra hours at Gatwick to kill.
Dave
> -Original
Liam,
As one of the TNMOC Members (roughly equivalent to "friends" in other museums)
I don't think Bletchley Park would collapse without TNMOC. It has huge income
from renting out buildings other than those TNMOC use.
It has many visitors who are interesting in the place and the story and
Jack,
Note that Bletchley Park is now split into two. (don't ask) and Colossus
and the Bombe re-build are now at TNMOC not at Bletchley Park. Its on the
same site but two Museums.
Dave
> -Original Message-
> From: cctalk On Behalf Of Jack Harper via
> cctalk
> Sent: 06 July 2019 17:31
Bill,
I think you will be cutting things fine. The risks are up to you,
You won't drive from Gatwick to Bletchley in an hour. It’s the wrong side of
London. Google is currently saying 1h 33Mins.
However, the route involves the M25 via Heathrow and that has frequent
blockages so IMHO it’s a
> -Original Message-
> From: cctech On Behalf Of Fred Cisin via
> cctech
> Sent: 06 July 2019 21:21
> To: General Discussion: On-Topic Posts
> Subject: RE: advice upcoming visit to Bletchley Park / comp museum
>
> On Sat, 6 Jul 2019, Dave Wade via cctech wrote:
> > However, the route
Wade via cctalk mailto:cctalk@classiccmp.org> > wrote:
> -Original Message-
> From: William Donzelli mailto:wdonze...@gmail.com> >
> Sent: 07 July 2019 01:56
> To: Dave Wade mailto:dave.g4...@gmail.com> >; General
> Discussion: On-Topic
> Posts mailto:cc
> -Original Message-
> From: William Donzelli
> Sent: 07 July 2019 01:56
> To: Dave Wade ; General Discussion: On-Topic
> Posts
> Subject: Re: advice upcoming visit to Bletchley Park / comp museum
>
> > If you really want to do justice to Bletchley you need two days.
>
> I did the site
These days Microsoft Exchange uses SMTP
Dave
> -Original Message-
> From: cctalk On Behalf Of Grant Taylor via
> cctalk
> Sent: 05 July 2019 22:06
> To: cctalk
> Subject: Email delivery protocols / methods.
>
> Here's pot stirrer for a holiday Friday afternoon:
>
> How many different
> -Original Message-
> From: cctalk On Behalf Of Ali via cctalk
> Sent: 27 June 2019 06:55
> To: 'Grant Taylor' ; 'General Discussion:
> On-Topic and Off-Topic Posts'
> Subject: RE: OT: the end of Dyn DNS
>
> > > Now that Dyn has been absorbed by Oracle I need a new DNS service
> > >
1 - 100 of 235 matches
Mail list logo
