> On Jun 1, 2019, at 4:22 PM, Steve Malikoff via cctalk
> wrote:
>
> BTW If the old rubber rings one the hubs are too
> expanded and won't allow a tape reel to slide on, just replace with a # BS336
> O-ring
> from a bearings/seals/gasket shop. These are cheap, readily available and
> takes
Mark said
> Does anybody here recognize the make and model of this tape drive?
>
> https://pbs.twimg.com/media/D7_mfdfUIAMcTly.jpg
>
> --
> Mark J. Blair, NF6X
> http://www.nf6x.net/
As Al said, Kennedy 9000.
Slide the test buttons door panel upwards on the top left and all will be
revealed :)
Apologies for cross-posting. I've added a few new bits and pieces to the
Dick Smith System 80 site. If anyone is interested, take a look at the
first three entries under this link.
https://www.classic-computers.org.nz/system-80/whats_new.htm
Incidentally, this month is somewhat of a milestone.
> On Jun 1, 2019, at 15:27, John H. Reinhardt via cctalk
> wrote:
>
> Congrats!! Should be fun to play with. I just picked up a Micro PDP-11/53
> which is about the biggest I can fit into my office/computer room. lol
>
Neat! I’d like to get a PDP-11 in that form factor someday.
On Sat, Jun 1, 2019, 4:19 PM Chris Pye wrote:
>
> > On 2 Jun 2019, at 5:07 am, Warner Losh via cctalk
> wrote:
> >
> > Found the Ultrix poster from 1984 I was asking about today when cleaning
> > out my truck:
> >
> > https://twitter.com/bsdimp/status/1134855890689855488
> >
> > Warner
>
>
> I
On 6/1/2019 5:24 PM, Mark J. Blair via cctalk wrote:
On Jun 1, 2019, at 14:57, John H. Reinhardt via cctalk
wrote:
Is this the system that was on Reddit?
Yes. I’ll be fetching it next weekend. I’m excited! I wonder if the hard drive
is still usable, and if there is anything interesting on
> On Jun 1, 2019, at 14:57, John H. Reinhardt via cctalk
> wrote:
> Is this the system that was on Reddit?
Yes. I’ll be fetching it next weekend. I’m excited! I wonder if the hard drive
is still usable, and if there is anything interesting on it?
By a chance meeting with my neighbor today, I
> On 2 Jun 2019, at 5:07 am, Warner Losh via cctalk
> wrote:
>
> Found the Ultrix poster from 1984 I was asking about today when cleaning
> out my truck:
>
> https://twitter.com/bsdimp/status/1134855890689855488
>
> Warner
I see that there is a Pro sitting on the desk, was there are
On 6/1/2019 1:23 PM, Mark J. Blair via cctalk wrote:
Thanks!
I am taking the whole system. It's in a rack with a PDP-11/34A, a System
Industries 9400 controller, and what looks to me like a Fujitsu M228x series
hard drive:
https://pbs.twimg.com/media/D77fRMFU0AEQtSO.jpg
I grabbed the M228x
Found the Ultrix poster from 1984 I was asking about today when cleaning
out my truck:
https://twitter.com/bsdimp/status/1134855890689855488
Warner
Cool. So that means that this 11/34A has more backplane slots than the base
model? The programmer panel is also appealing. I presume that the Kennedy 9000
doesn’t have a Pertec interface, then?
It remains to be seen whether I ever start my 11/44 restoration vs. moving it
along to another
On 6/1/19 11:23 AM, Mark J. Blair via cctalk wrote:
> Would the brown panel between the tape drive and computer be a filler panel,
> or part of the 11/34A?
it is the top half of the 10.5" CPU chassis
the tape controller is probably internal to the cpu and with have three ribbon
cables
Looks like a Kennedy 9000 series, with the sliding panel and all.
On Sat, Jun 1, 2019 at 12:53 PM Mark J. Blair via cctalk
wrote:
>
> Does anybody here recognize the make and model of this tape drive?
>
> https://pbs.twimg.com/media/D7_mfdfUIAMcTly.jpg
>
> --
> Mark J. Blair, NF6X
>
The M7264 CPU thread reminded me of the collection of LSI-11 CPU's that
I have and want to get up and running. A very useful thread.
This may have been covered some time in the past, but, my question is
"What is the minimum load for the power supply in the BA11-M, -N and
BA23 boxes?"
Is it
Thanks!
I am taking the whole system. It's in a rack with a PDP-11/34A, a System
Industries 9400 controller, and what looks to me like a Fujitsu M228x series
hard drive:
https://pbs.twimg.com/media/D77fRMFU0AEQtSO.jpg
I grabbed the M228x manuals from Bitsavers to look up how the spindle and
45ips tension arm 800/1600 looking at the 'density' slide switch
make shure you get the cables and controller board if you don't take the whole
system
On 6/1/19 10:56 AM, Al Kossow via cctalk wrote:
> kennedy 9000
>
> On 6/1/19 10:53 AM, Mark J. Blair via cctalk wrote:
>> Does anybody here
I don't know for sure, but it looks a heck of a lot like the drive I
loaded for backups on a 11/34a that the company I worked summers for had.
1983 or 1984 was the time frame.
Warner
On Sat, Jun 1, 2019, 11:53 AM Mark J. Blair via cctalk <
cctalk@classiccmp.org> wrote:
> Does anybody here
kennedy 9000
On 6/1/19 10:53 AM, Mark J. Blair via cctalk wrote:
> Does anybody here recognize the make and model of this tape drive?
>
> https://pbs.twimg.com/media/D7_mfdfUIAMcTly.jpg
>
Does anybody here recognize the make and model of this tape drive?
https://pbs.twimg.com/media/D7_mfdfUIAMcTly.jpg
--
Mark J. Blair, NF6X
http://www.nf6x.net/
Anyone happen to have one for sale/trade?
On 6/1/2019 12:11 AM, Rod Smallwood via cctalk wrote:
Hi
Well we are moving forward.
The 160336 alternate RQDX3 address and vector have been confirmed as
OK by one of our Techno Mages.
So rather than an RX50 I'll give an RX33 whirl. A floppy disk way in
means I can enhance the
I hope the creator of the uniprobe will someday create a Q probe!
From: cctalk on behalf of Jim Manley via cctalk
Sent: Saturday, June 1, 2019 2:35 AM
To: marc.how...@ieee.org; Marc Howard; General Discussion: On-Topic and
Off-Topic Posts
Subject: Re:
http://retrocmp.com/tools/uniprobe
On Fri, May 31, 2019 at 11:44 PM Marc Howard via cctalk <
cctalk@classiccmp.org> wrote:
> OK, stupid question time. I'm at work and I can't find retrocomp's
> website. Can you point me to it?
>
> Thanks,
>
> Marc Howard
>
> On Fri, May 31, 2019 at 2:36 PM
23 matches
Mail list logo
