Re: [c-nsp] cisco-nsp Digest, Vol 182, Issue 20

Thank you all for your comments. I got the switch to boot into Denali by simply power cycling it. It seems that I was TOO patient. The switch wasn't upgrading in the background; it was hanging. Why Denali? From various articles which I have read online, Cisco wants to move from the 3.7

Re: [c-nsp] Upgrading from 3.0.6 to Denali-16.3.5b

dded MPLS, which is a major overhaul in this "slow part of the upgrade" - the ASIC programming -Original Message- From: cisco-nsp [mailto:cisco-nsp-boun...@puck.nether.net] On Behalf Of Christina Klam Sent: Wednesday, January 17, 2018 3:59 PM To: cisco-nsp@puck.nether.net Subject: [c-nsp] Upg

[c-nsp] Upgrading from 3.0.6 to Denali-16.3.5b

All, This is the second Cat3850 that I have tried to upgrade to Denali-16.3.5b. Both take hours to go from expanding the files to finishing. I am on hour two for the second switch. Except for interface status messages about my management port (Gig 0/0), there is nothing going over the

Re: [c-nsp] Outdoor switch

sp-boun...@puck.nether.net on behalf of ja...@puck.nether.net> wrote: If you just need one port, there is this box that works quite well: https://www.balticnetworks.com/mikrotik-fiber-to-copper-converter.html It does not have an integrated splice tray though. - J

[c-nsp] Outdoor switch

All, I am hoping for some ideas. We are running fiber to an outdoor pole (for cameras and wireless access-points) and need a switch that can be configured remotely, does 802.1q, Qos, and has 3 - 5 ports. We are in the MidAtlantic so the temperatures range from well below freezing to 100 deg

Re: [c-nsp] cisco-nsp Digest, Vol 164, Issue 4

If the in-packet flow timestamps look good, it's probably a > template/field interpretation bug/difference b/w nfsen and ASR. > When we did the tcpdumps, we saw the correct timestamps being sent. Yet, nfsen was only showing the epoch date. This was on our 4500X & our N7Ks. --

[c-nsp] Netflow with nfsen issue

We were having the same timestamp/epoch issue. We ended up just moving away from nfsen and going with Plixar. --Christina ___ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at

[c-nsp] TwinAx cables

definitely decreases. Thank you, -- Christina Klam Network Engineer Institute for Advanced Study Email: ck...@ias.edu Einstein Drive Telephone: 609-734-8154 Princeton, NJ 08540 Fax: 609-951-4418 ___ cisco-nsp mailing list cisco-nsp

[c-nsp] Funding Opportunities to Build Your Network Infrastructure

g* Technical Solutions Architect, Cisco Systems Register Now <https://grs.cisco.com/grsx/cust/grsEventSite.html?EventCode=12439=1=000860976> ---- Christina Klam Network Engineer Institute for Advanced Study Email: ck...@ias.edu Einstein Drive Telephone: 609-734-8154 P

[c-nsp] Cisco TSOM

using it? If so, how big is your network and staff (e.g. how many nodes, average number of TAC tickets a month, number of Network Engineers on staff,)? Do you find it useful? Would you recommend it and why? Thank you, Christina Klam Network Engineer Institute for Advanced Study Email: ck...@ias.edu

Re: [c-nsp] Problem with 10Gig SFP / Fibre link

Try cleaning the ends of all of your fiber cables and using a fiber tester to determine the loss. -- Christina Klam Network Engineer Institute for Advanced Study Email: ck...@ias.edu Einstein Drive Telephone: 609-734-8154 Princeton, NJ 08540 Fax: 609-951-4418

[c-nsp] Third party transceivers that fail only with new, NX-OS 6.2.2a on sup-2E

with our M2 cards. As it has been awhile since we ran 6.1 so I do not know if the issue began with 6.2 or not. I do not know if this helps. But, I feel better after venting. :-) -- Christina Klam Network Engineer Institute for Advanced Study Email: ck...@ias.edu Einstein Drive Telephone: 609

Re: [c-nsp] Third party transceivers that fail only with new, NX-OS 6.2.2a on sup-2E

on nexus 7k running 6.1.3 but when I did the upgrade to 6.2.2a NO GOOD. We also ran across issue with 6.2.2a on sup-2E that you cannot overwrite slot0: file. Delete but no overwrite. TAC case open. Jeff On Nov 19, 2013, at 8:54 AM, Christina Klam ck...@ias.edu wrote: Jeff, We have

Re: [c-nsp] Cat4500 High CPU with Multicast Stream

. Regards, Antonio Soares, CCIE #18473 (RS/SP) amsoa...@netcabo.pt http://www.ccie18473.net -Original Message- From: cisco-nsp-boun...@puck.nether.net [mailto:cisco-nsp-boun...@puck.nether.net] On Behalf Of Christina Klam Sent: quarta-feira, 13 de Julho de 2011 15:11 To: cisco-nsp

Re: [c-nsp] Cat4500 High CPU with Multicast Stream

I have the same CPU problem but on a 3750. How would I add a similar rate-limit for our ghost traffic? That command does not work on 12.2(52)SE. Thank you, Christina Message: 9 Date: Wed, 13 Jul 2011 13:59:28 +0100 From: Alexander Clouter a...@digriz.org.uk To:

Re: [c-nsp] Storm-Control on server switch uplinks.

Thank you everyone. I will set the broadcast and multicast storm-control to 0.35 (35%) on the interinks between the distribution and access layer switches. At a later time, I will add the filters to all edge ports as well. Thank you for your help, Christina Today's Topics: 1. Re:

[c-nsp] Storm-Control on server switch uplinks.

Thank you, -- Christina Christina Klam Network Administrator ___ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/

Re: [c-nsp] Nexus1000v: Mgmt Port

JP, Thank you. That is reassuring. I ended up doing something very similar (but my control/packet are on the DVS and on the same VLAN). Christina Klam Network Administrator Institute for Advanced Study Email: ck...@ias.edu Einstein Drive Telephone: 609-734-8154 Princeton, NJ

[c-nsp] Nexus1000v: Mgmt Port

Hello, I am setting up a pair of Nexus 1000v switches. As per the Cisco documentation, I have the management port in my system-uplink port-group. However, currently, this management port is in the same production VLAN as most of our servers. I would rather have the management in an separate

[c-nsp] Cat6500 PM_SCP-SP-2-LCP_FW_ERR_INFORM Bus Asic #0 out, of sync error

or chassis. Thoughts? --Chris - -- Christina Klam Network Administrator Institute for Advanced Study Email: ck...@ias.edu Einstein Drive Telephone: 609-734-8154 Princeton, NJ 08540 Fax: 609-951-4418 -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.9 (MingW32) Comment: Using

[c-nsp] Non SmartNet Contracts

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hello, We are in the process of renewing our annual SmartNet contract. Because of the cost, I was looking at using a 3rd Party vendor for all equipment currently on contract as NBD (next business day). Has anyone used NetSure by Network Hardware?

[c-nsp] PXE traffic down a different VLAN

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 We just use IP helper and have had no problems with our PXE boots. Christina Klam Network Administrator Institute for Advanced Study Email: ck...@ias.edu Einstein Drive Telephone: 609-734-8154 Princeton, NJ 08540 Fax: 609-951-4418

Re: [c-nsp] L2 STP issue

P.A, I had a similar issue with Foundry switches and cisco. Try setting the spanning-tree priority. For us, this stop the spanning-tree topology changes. The cisco 6509 is running rapid-pvst and the HP switches are running rstp. The cisco was the root bridge and all HP's saw the cisco as the

[c-nsp] Module provisioning for a 6500

In know on a 3750, I can use switch [] provision to manually assign a physical switch any switch number I want. Is there a way to virtually assign a module a different slot id on a 6513? What I want is to make gig 1/1 really be on the physical interface gig 9/1. Thanks in advance for you

[c-nsp] Mac OSX WakeOnLan

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hello, We have been trying to get WakeOnLan for Mac OSX to work reliably across subnets without success. I have added ip directed-broadcast [access-list#] to the interface VLANs for those buildings/users with Mac Minis. However, it works only part

[c-nsp] Squid cannot see wccp traffic through GRE Tunnel

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 All, We have been having some problems with wccpv2 working through a GRE tunnel between a 6504e (version s3223-ipservicesk9_wan-mz.122-33.SXI.bin) and a Squid server (RHEL5). The tunnel is up; and we an see GRE traffic on both sides. WCCP is up as

[c-nsp] %HA_EM-6-LOG: Mandatory.go_nondislp.tcl:

My question is similar to Gert's. A month ago I upgraded to SXH4 (and then to SXI to see if this was a bug to just SXH4), after which I started to see a ton of drop packets on multiple line cards. The logs said: %HA_EM-6-LOG: Mandatory.go_nondislp.tcl: GOLD EEM TCL policy for

Re: [c-nsp] Diagnostic errors in 6513

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 I replaced the original chassis in December because whatever supervisor I used in slot 8 would become inactive or unknown within 2 months. After the fourth supervisor reported the same issue and I had two line cards reporting problems, I bit the

[c-nsp] Diagnostic errors in 6513

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 All, We have a Cisco 6513 in production that is having some problems. After the switch runs its daily diagnostics on each of the modules, most of the line cards stop passing traffic. As a workaround, I have disabled diagnostics on all of the

[c-nsp] More info on bugs CSCsi03864 CSCsi49150

All, Last week our core router (a 6509) crashed. After reading the crashinfo and the logs, we determined the the source of the crash to be CSCsi49150 (%PM-SP-4-PORT_BOUNCED: Port Gi2/3 was bounced by Consistency Check IDBS). --- Conditions: Not specific to standby. Seen on both