Re: Stus-List Oil pressure alarm on Westerbeke 20B2

2019-06-06 Thread David Castor via CnC-List
I think it could just as easily be the temperature switch. Mine went bad on my Westerbeke 21 a couple of years ago. On Thu, Jun 6, 2019 at 7:25 PM Nathan Post via CnC-List < cnc-list@cnc-list.com> wrote: > Hello, > > On the way back to the marina this evening the oil pressure alarm went off >

Re: Stus-List Oil pressure alarm on Westerbeke 20B2

2019-06-06 Thread Josh Muckley via CnC-List
The oil pressure switch and the temperature switch are most likely independent of their respective senders for the gauges. You can check them for continuity to ground - Just across the screw on back to the engine block. A loose wire can also cause your symptom. I believe that the temp switch

Re: Stus-List Oil pressure alarm on Westerbeke 20B2

2019-06-06 Thread ALAN BERGEN via CnC-List
Sounds like the sender. I replaced mine this year. Alan Bergen 35 Mk III Thirsty Rose City YC Portland, OR On Thu, Jun 6, 2019 at 7:25 PM Nathan Post via CnC-List < cnc-list@cnc-list.com> wrote: > Hello, > > On the way back to the marina this evening the oil pressure alarm went off > after

Stus-List Oil pressure alarm on Westerbeke 20B2

2019-06-06 Thread Nathan Post via CnC-List
Hello, On the way back to the marina this evening the oil pressure alarm went off after having motored about 10 minutes (and previously an hour earlier motored 20 minutes or so out). I have a Westerbeke 20B2 diesel in my boat. We have the admiral style control panel so that has both the

Re: Stus-List I Need a jib or genny

2019-06-06 Thread Jim Watts via CnC-List
What boat? That might make it easier. Jim Watts Paradigm Shift C 35 Mk III Victoria, BC On Thu, 6 Jun 2019 at 05:06, Jerome Tauber via CnC-List < cnc-list@cnc-list.com> wrote: > I blew out my Genoa and need a temporary headsail while new one is being > made. Anyone have an old jib or Genoa

Re: Stus-List signet wind instruments reading zero speed and then too high

2019-06-06 Thread Jack Fitzgerald via CnC-List
Bailey I have Signet instruments on my C I call Aaron at Signet Marine and he will be happy to assist you. Email: serv...@signetmarine.com (310) 320-4349 Best regards, Jack Fitzgerald Fitzgerald Forwarding Co. Inc. FMC license no:1966F 260 Oatland Island Road, Savannah, GA 31410 USA Tel. no: 912

Re: Stus-List I Need a jib or genny

2019-06-06 Thread sv Rebecca Leah via CnC-List
What side of the continent do you live on?I might have one that would work. Luff 44'8".Doug Mountjoy Sv Rebecca Leah C LF39253-208-1412Port Orchard YC wa. Original message From: Jerome Tauber via CnC-List Date: 6/6/19 05:05 (GMT-08:00) To: cnc-list@cnc-list.com Cc: Jerome

Stus-List I Need a jib or genny

2019-06-06 Thread Jerome Tauber via CnC-List
I blew out my Genoa and need a temporary headsail while new one is being made. Anyone have an old jib or Genoa they’d like to sell? Luff 45- 47 feet. Preferably 100 to 135 %. Thanks. Jerry Sent from my iPhone > On Jun 5, 2019, at 11:18 PM, Bailey White via CnC-List > wrote: > > I have a