What year were the sails made for your 1981 C 36?
> On 09/08/2021 2:54 PM WILLIAM WALKER via CnC-List
> wrote:
>
>
> Guys and Gals,
> This is premature, but testing the water.
> I have a Main, #s 1, 2, & 3 headsails for a 1981 CnC 36 in UK Tape Drive
> for sale. #s 1 & 3 are
Always pleasantly surprised at the speed of the C This past Sunday with 10
to 15kn wind I was sailing from Shelter Island with a friend in a 92 Morris
Justine. On the a 13 mile run between Orient Point and Westbrook CT on a beam
to close reach the C Landfall consistently outpaced the Morris.
My local rigger is taking no chances re-rigging my 95 C 36XL. He sent it all
to Rigging Only(?) in Rhode Is and will reinstall with new which has been
matched exactly.
Some parts of older rigging are often not available and must be replaced with
similar or manufactured ($$$) to match.
I bit
You really need to disassemble the rigging and measure the fittings to ensure
you get the correct size T-Ball fittings and that they fit into the backing
plates. On most boats I re-rig I don’t order parts until I have disassembled
the rigging and know exactly what I need. If you are going
Guys and Gals,This is premature, but testing the water.I have a Main, #s 1, 2,
& 3 headsails for a 1981 CnC 36 in UK Tape Drive for sale. #s 1 & 3 are in
nearly new condition. Main in good to excellent condition. #2 was roller
furled and used a lot, needs new sun protection and some repair.
Mine too, and I had the vinyl window replaced with Strataglass, more durable,
rigid ( no distorsion ) and there is a sunbrella panel that can be unrolled to
close it.Was made by Genco
SylvainC MkIII
On Wednesday, September 8, 2021, 12:32:55 PM EDT, Matthew via CnC-List
wrote:
That's how mine is made as well (without the solar panels).
From: Novabraid via CnC-List
Sent: Wednesday, September 08, 2021 11:31 AM
To: 'Stus-List'
Cc: csgilchr...@comcast.net
Subject: Stus-List Re: Bimini for 1984 37
More suggestions for the bimini design:
When I acquired our
More suggestions for the bimini design:
When I acquired our Landfall 35, the previous owner had a bimini built that
extended to the back of the cockpit but had the backstay running through an
opening in the middle of the bimini, with 2 of the support struts forward of
the back stay and one
I used ShipShape for a cover, very impressed with his quality. Nice fellow, Jim
came out and measured the boat himself.
http://www.shipshapecanvas.com/biminis.php
Bill Coleman
Entrada, Erie, PA
From: pete.shelquist--- via CnC-List [mailto:cnc-list@cnc-list.com]
Sent:
Bayfield, wi
From: DJ via CnC-List
Sent: Wednesday, September 8, 2021 7:31 AM
To: Stus-List
Cc: DJ
Subject: Stus-List Re: Bimini for 1984 37
Hi Pete,
Where are you/your boat located?
Danny
On Sep 7, 2021 9:21 PM, "pete.shelquist--- via CnC-List"
Pete:
When I added a bimini to my boat, I assumed that the supplier would make it
collapsible, so I could fold it up and out of the way when not in use.
Instead, the supplier made a "fixed" bimini that was permanently in place.
It got in the way of seeing the genoa in races, and is not a great
Adam; Don’t know how to reach you. I’m 18 miles or so east of Toledo. What’s up?
colinbink...@yahoo.comc 40C #3
Sent from Yahoo Mail for iPhone
On Tuesday, September 7, 2021, 8:48 PM, Adam Hayden via CnC-List
wrote:
Hello
Is there anyone on the list located in the Sandusky Ohio area. If
Hi Pete, Where are you/your boat located?DannyOn Sep 7, 2021 9:21 PM, "pete.shelquist--- via CnC-List" wrote:I held out as long as I could and am now looking into adding a bimini to my 37. Does anyone have strong opinion for options or recommendations for suppliers? thxThanks to all of the
If it runs freely and rpms increase normally w/o trans engaged, I would look at
the trans, packing gland too tight/shaft not aligned/cutless
bearing/etc.——-something that is ‘aft’ of the engine.
Charlie Nelson
Sent from the all new AOL app for iOS
On Wednesday, September 8, 2021, 1:43 AM,
Thanks all for the feedback on this - the owner is pretty frustrated and the
days are getting shorter.
Thanks Tom - he did replace the injectors last season (no change to the
symptoms) but I agree it’s worth verifying their operation before pulling the
injector pump regardless.
Dave
15 matches
Mail list logo
