Stus-List Re: Bermuda 1-2

Best of luck and sail fast and safe John Read -Original Message- From: John McCrea via CnC-List Sent: Thursday, June 15, 2023 9:55 AM To: cnc-list@cnc-list.com Cc: John McCrea Subject: Stus-List Bermuda 1-2 Listers, If interested I am racing in the Bermuda 1-2 return leg. We start

Stus-List Re: Force 10 Stove

I installed two #6 aluminum (tall skinny) tanks on our 30 mk1’s pushpit rails using the rail mount assembly from Sure Marine in Seattle. They sold us the tanks, rail mounts, regulator, gauge, solenoid, solenoid switch, everything except the hoses. One of the brackets has the regulator, gauge,

Stus-List Re: Force 10 Stove

As part of my OVNI 435 refit I purchased a new force 10 stove and retrofitted from camping gaz to propane. (Cooked my first meal last night - sweltering on the hard in curacao). If you study force 10’s home page (or manual) you should be able to find the 10 or so ‘standard’ sizes. (If there

Stus-List Re: Force 10 Stove

Sure Marine in Seattle has everything you need. I did a similar install on out 35 MK1.  Tank, bracket, t, solenoid, and custom length hose to the stove.https://flic.kr/p/26vv7ToTom BuscagliaP 206.463.9200F 206.463.9290C 305.409.3660Skype - thombuscOn Jun 15, 2023, at 8:49 AM, Doug Mountjoy via

Stus-List Re: Force 10 Stove

Thanks! Also found them on Amazon: https://www.amazon.com/dp/B09VW5DRY6/ref=twister_B09XKNX9ZG?_encoding=UTF8 =1 That looks about perfect  From: Doug Mountjoy via CnC-List Sent: Thursday, June 15, 2023

Stus-List Re: Force 10 Stove

Joe, Fisheries Supply carries the 1.4 gal tall thin tanks, and the fancy mount. I just finished converting my Sabre to propane. One thing is, only one connection inside the boat at the stove. I mounted the regulator and solenoid valve under a stern pulpit seat. Teed in a hose to the grill also. On

Stus-List Re: Force 10 Stove

One other comment about CNG Ours has two regulators and then the solenoid valve. In 2021 we noted that leaving the tank valve opened for any amount of time allowed the tank to empty. This was very concerning. We replaced the first cut regulator (that steps down from 3000psi to about 100+),

Stus-List Re: Bermuda 1-2

Sail fast and safe! Joel On Thu, Jun 15, 2023 at 9:55 AM John McCrea via CnC-List < cnc-list@cnc-list.com> wrote: > Listers, > > If interested I am racing in the Bermuda 1-2 return leg. We start this > morning. I am on a Morris Justine 36. Fleet winner on corrected time on leg > one. This my

Stus-List Bermuda 1-2

Listers, If interested I am racing in the Bermuda 1-2 return leg. We start this morning. I am on a Morris Justine 36. Fleet winner on corrected time on leg one. This my 7th return leg since 1989. Lots of C’s over years but none this time. Lols like a fast reach home not far off the western

Stus-List Re: Force 10 Stove

Joe, I feel your pain!: My insurance Co. (BoatUS-Geico) made me remove my CNG tank because it wasn't in a dedicated locker...we don't cook onboard much so it wasn't a big deal, but I wasn't happy about it; the regs allow a CNG tank under 100 cubic feet;  you will be better off with propane;

Stus-List Re: Force 10 Stove

Missed the part about the cert – I got the local dive shop to send mine off for hydro. It came back and now it LEAKS around the valve. Drain gas, reseal valve, fill it again, and it still leaks ☹ I am a lot more annoyed with the wasted time back and forth than the $4 worth of wasted gas. The

Stus-List Re: Force 10 Stove

I have no propane locker. I am probably going to strap a tank on the stern rail. I need to find those little tall and thin aluminum tanks. No way am I going around with a 20 pound steel grill tank hanging off there, that is too low budget even for me! I may actually try a little torch tank and

Stus-List Re: Force 10 Stove

My current stove clears the hatch *just barely*. Need to take a measurement or two! From: Chris Riedinger via CnC-List Sent: Thursday, June 15, 2023 9:20 AM To: Stus-List Cc: Chris Riedinger Subject: Stus-List Re: Force 10 Stove Just swapped an older force10 for a newer one in our

Stus-List Re: Force 10 Stove

Even if it is the correct width, the pivot point may need to be moved. Not a big deal if you measure first. (I didn't, so I had to wrestle the stove twice) Virus-free.www.avg.com

Stus-List Re: Force 10 Stove

Hi Joe What was your plan for a propane locker? Boats with CNG systems tend not to have one In our case CNG is easy to source but certifying the tanks is nearly impossible Mike From: Della Barba, Joe via CnC-List Sent: June 15, 2023 10:15 AM To: Stus-List Cc: Della Barba, Joe Subject:

Stus-List Re: Force 10 Stove

Just swapped an older force10 for a newer one in our 37/40+ I found out the tightest measurement most have is the companionway - check that in addition to the hole the stove needs to go into Best of luck On Thu, Jun 15, 2023, 6:15 AM Della Barba, Joe via CnC-List < cnc-list@cnc-list.com> wrote:

Stus-List Re: Force 10 Stove

I would assume so, but can't say for sure. Our mk2 has one and it's a great stove. -- Shawn Wright shawngwri...@gmail.com S/V Halcyon Passage https://www.facebook.com/halcyonpassage S/V Callisto, 1974 C 35* (for sale)* https://www.facebook.com/SVCallisto On Thu, Jun 15, 2023 at 6:15 AM Della

Stus-List Force 10 Stove

Does the standard American size Force 10 3-burner stove fit the C 35 MK I? I would assume it does, but want to check. I am thinking of going from CNG to propane, CNG is very hard to source now in most places. Joe Della Barba DCSI 410-966-7255 Please show your appreciation for this list and